Add bus attachment for the ohci device on this chip. The bus and hub
are detected correctly, but the children devices aren't detected
correctly for reasons unknown.
o update TODO list
o Better use of busdma
o mark RX dtors as COHERENT. This helps performance a lot by not requiring
so many EXPENSIVE cache flushes. The cost of accessing it non-cached
is much smaller.
o Copy data from Rx buffers to make IP header 4 byte aligned.
o CRC length included in reported length, so cope
o Don't free TX buffer twice
o Manage TX buffers better.
o Enable just the interrupts we want.
o Manage OACTIVE better
# Some of these done by cognet
# These changes let us get to # via NFS root.
o Add memory barrier to bus space
o Allow for up to 3 IRQs per device
o Move to table driven population of children devices.
o Add support for usb ohci memory mapped controller resource allocation.
o Clean up a bunch of extra writes to disable interrupts that are now
done elsewhere.
o Force all system interrupt handlers be fast. We get deadlock if they
aren't.
o Disable all interrupts that the ST can generate until we have an ISR
to service them.
o Correct clock calculation to make DELAY the right length...
Submitted by: cognet (#2)
request, the FreeBSD NFS client will quickly back off to a excessively
long wait (days, then weeks) before retrying the request.
Change the behavior of the FreeBSD NFS client to match the behavior of
the reference NFS client implementation (Solaris). This provides a fixed
delay of 10 seconds between each retry by default. A sysctl, called
nfs3_jukebox_delay, is now available to tune the delay. Unlike Solaris,
the sysctl value on FreeBSD is in seconds, rather than in HZ.
Sponsored by: Network Appliance, Incorporated
Reviewed by: rick
Approved by: silby
MFC after: 3 days
sockets as long as the sockets have not been aborted or detached. Do
not try to free the socket in pru_detach(), since sofree() will do so,
if needed, once pru_detach() returns.
Annotate a bug in ddp_abort(), which fails to free the socket; this
is probably OK as ddp_abort() should never be called, so should
instead be deleted.
pcb's allocated:
- Universally ensure (and assert) that so_pcb is not NULL, removing lots
of checks and error cases. Don't free the pcb without clearing the
so_pcb pointer.
- Don't try to free the socket in pru_detach(), since the caller will
immediately free the socket.
- Do retain the sotryfree() in pru_abort() for now, although eventually
the caller will do it unconditionally.
defined for an in-use socket. This allows us to eliminate countless tests
of whether so_pcb is non-NULL, eliminating dozens of error cases. For
now, retain the call to sotryfree() in the uipc_abort() path, but this
will eventually move to soabort().
These new assumptions should be largely correct, and will become more so
as the socket/pcb reference model is fixed. Removing the notion that
so_pcb can be non-NULL is a critical step towards further fine-graining
of the UNIX domain socket locking, as the so_pcb reference no longer
needs to be protected using locks, instead it is a property of the socket
life cycle.
K&R style function declarations with ANSI style. Also fix endian bugs
accessing ioctl arguments that are passed by value.
PR: kern/93897
Submitted by: Vilmos Nebehaj < vili at huwico dot hu >
MFC after: 1 week
debugging message if the flag PMC_F_OLDVALUE was specified in the
PMC_OP_RW request being acted upon. This should fix Coverity bug
CID 671.
Found by: Coverity Prevent
MFC after: 3 weeks
userland. The comment indicated that something in userland needed them, but
make universe can't seem to find any traces of it.
Move <sys/queue.h> include up.
consumers ignore the return value, soabort() is required to succeed,
and protocols produce errors here to report multiple freeing of the
pcb, which we hope to eliminate.
especially for vchans. It turns out that channel numbering always depend
on d->devcount counter (which keep increasing), while PCMMKMINOR() truncate
everything to 8bit length. At some point the truncation cause the newly
created character device overlapped with the existence one, causing erratic
overall system behaviour and panic. Easily reproduce with something like:
(Luckily, only root can reproduce this)
while : ; do
sysctl hw.snd.pcm0.vchans=200
sysctl hw.snd.pcm0.vchans=100
done
- Enforce channel/chardev numbering within 8bit boundary. Return E2BIG
if necessary.
- Traverse d->channels SLIST and try to reclaim "free" counter during channel
creation. Don't rely on d->devcount at all.
- Destroy vchans in reverse order.
Anyway, this is not the fault of vchans. It is just that vchans are so cute
and begging to be abused ;) . Don't blame her.
Old, hidden bugs.. sigh..
MFC after: 3 days
this corrects problems with drivers that rely on the host to do
crypto (iwi, ipw, ral, ural, wi (hostap), awi)
Hard work by: luigi, mlaier
Reviewed by: luigi, mlaier
MFC after: 1 week
applications.
Open[BGP|OSPF]D make use of this to determine the link status of
interfaces to make the right routing descisions.
Obtained from: OpenBSD
MFC after: 3 days
- Allow RTM_CHANGE to change a number of route flags as specified by
RTF_FMASK.
- The unused rtm_use field in struct rt_msghdr is redesignated as
rtm_fmask field to communicate route flag changes in RTM_CHANGE
messages from userland. The use count of a route was moved to
rtm_rmx a long time ago. For source code compatibility reasons
a define of rtm_use to rtm_fmask is provided.
These changes faciliate running of multiple cooperating routing
daemons at the same time without causing undesired interference.
Open[BGP|OSPF]D make use of these features to have IGP routes
override EGP ones.
Obtained from: OpenBSD (claudio@)
MFC after: 3 days
protocol to the socket. Normally protocol references are weak: that is,
the socket layer can tear down the socket (and hence protocol state)
when it finds convenient. This flag will allow the protocol to
explicitly declare to the socket layer that it is maintaining a
strong reference, rather than the current implicit model associated
with so_pcb pointer values and repeated attempts to possibly free the
socket.
rather than panicking later. This can occur if the kernel calls
vn_open() on a fifo, as there will be no associated file descriptor,
and therefore the file descriptor operations cannot be modified to
point to the fifo operation set.
MFC after: 3 days
Reported by: Martin <nakal at nurfuerspam dot de>
PR: 94278
Previously, we tried to allow this only for root. However, we were calling
suser() on the *target* process rather than the current process. This
means that if you can ptrace() a process running as root you can set a
hardware watch point in the kernel. In practice I think you probably have
to be root in order to pass the p_candebug() checks in ptrace() to attach
to a process running as root anyway. Rather than fix the suser(), I just
axed the entire idea, as I can't think of any good reason _at all_ for
userland to set hardware watch points for KVM.
MFC after: 3 days
Also thinks hardware watch points on KVM from userland are bad: bde, rwatson
