After OpenZFS import, zpool auto import behavior was moved to an
explicit "zpool import -a", and the zpool rc.d script was added
as a prerequisite of zvol.
However, in r299839, zvol was added as a prerequisite of dumpon,
making it to start very early and before all 'disks' providers.
At this time, dumping on a zvol is not supported, so remove this
requirement and make zpool depend on disks to allow zpool on
full disk encryption work.
Reviewed by: allanjude
Differential Revision: https://reviews.freebsd.org/D26333
This violated the RISC-V 64-bit ABI. On CheriBSD this manifested as
a trap when attempting to store 16-byte aligned types while zeroing
the stack.
Reported by: CHERI, jrtc27
Reviewed by: mhorne, br
Obtained from: CheriBSD
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D26327
prior to zvol and mountcritlocal resulting in ZVOLs (swap and
virtual machine UFS filesystems) being unavailable, leading to
boot failures.
We move the zpool import from zfs to a new zpool script, with the
-N option to avoid mounting datasets while making the ZPOOL's
datasets available for "legacy" mount (mountpoint=legacy) and ZVOLs
available for subsequent use for swap (in the zvol rc sript) or
for UFS or other filesystems in fstab(5), mounted by mountcritlocal.
Reviewed by: freqlabs (previous version)
Differential Revision: https://reviews.freebsd.org/D26185
The primary benefit is maintaining a completely shared
code base with the community allowing FreeBSD to receive
new features sooner and with less effort.
I would advise against doing 'zpool upgrade'
or creating indispensable pools using new
features until this change has had a month+
to soak.
Work on merging FreeBSD support in to what was
at the time "ZFS on Linux" began in August 2018.
I first publicly proposed transitioning FreeBSD
to (new) OpenZFS on December 18th, 2018. FreeBSD
support in OpenZFS was finally completed in December
2019. A CFT for downstreaming OpenZFS support in
to FreeBSD was first issued on July 8th. All issues
that were reported have been addressed or, for
a couple of less critical matters there are
pull requests in progress with OpenZFS. iXsystems
has tested and dogfooded extensively internally.
The TrueNAS 12 release is based on OpenZFS with
some additional features that have not yet made
it upstream.
Improvements include:
project quotas, encrypted datasets,
allocation classes, vectorized raidz,
vectorized checksums, various command line
improvements, zstd compression.
Thanks to those who have helped along the way:
Ryan Moeller, Allan Jude, Zack Welch, and many
others.
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D25872
flua does have some specific bits that will include luaconf.h, but the
definition of LUA_USE_DLOPEN for those won't matter. This belongs in liblua
instead.
To expand on my previous commit, which was a little sparse with details,
it's not really safe to allow LUA_USE_DLOPEN with host lib paths being used.
The host system could have an entirely different lua version and this could
cause us to crash and burn.
If we want to revive this later, we need to make sure to define c module
paths inside OBJDIR that are compiled against whatever version we've
bootstrapped.
Pointy hat: kevans
are encountered at boot time:
rcorder: requirement `ipfs' in file `/etc/rc.d/netif' has no providers.
rcorder: requirement `ipfilter' in file `/etc/rc.d/netif' has no
providers.
rcorder: requirement `ipfilter' in file `/etc/rc.d/netwait' has no
providers.
rcorder: requirement `ipfilter' in file `/etc/rc.d/net_watchdog' has no
providers.
rcorder: requirement `ipfilter' in file `/etc/rc.d/securelevel' has no
providers.
Listing its own requrements in BEFORE rather than use REQUIRE of
non-optional scripts resolves this issue.
The issue was discovered and patched by glebius at Netflix.
Submitted by: glebius
Reported by: glebius
MFC after: 1 week
The space between words is already being echoed by the space between quoted strings:
% echo 'foo' 'bar'
foo bar
% echo 'foo' ' baz'
foo baz
Found in `ipfw` and `mountlate` messages.
PR: 247948
Submitted by: Jose Luis Duran <jlduran@gmail.com>
MFC after: 2 weeks
Sponsored by: Klara Inc.
In the last IFUNC related changes to rtld, the code that handled non-PLT
GNU IFUNC relocations ended up getting lost. This could leave some
relocations unhandled, causing crashes or misbehavior. This change restores
the handling of these relocations, but now together with the other IFUNC
relocations, allowing resolvers to reference external symbols.
Reviewed by: kib
MFC after: 2 weeks
Sponsored by: Eldorado Research Institute (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D25550
This fixes Linux gettyname(3), with caveats (see PR).
PR: kern/240767
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D25558
aout support in ldconfig hasn't been required since FreeBSD 2.x.
Anyone still using FreeBSD 2 shared libraries can use a FreeBSD 2
ldconfig to generate aout ldconfig hints.
Reviewed by: dim, kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D24883
There are cases when gif_interfaces cannot be replaced
with cloned_interfaces, such as tunnels with external IPv6 addresses
and internal IPv4 or vice versa. Such configuration requires
extra invocation of ifconfig(8) and supported with gif_interfaces only.
MFC after: 1 week
libucl comes with a Lua library binding. Build it into flua.
This lets us parse/generate config files in the various formats supported by
libucl with flua. For example, the following script will detect the format of
an object written to stdin as one of UCL config, JSON, or YAML and write it to
stdout as pretty-printed JSON:
local ucl = require('ucl')
local parser = ucl.parser()
parser:parse_string(io.read('*a'))
local obj = parser:get_object()
print(ucl.to_format(obj, 'json'))
Reviewed by: kevans, pstef
Approved by: mmacy (mentor)
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D25009
This makes old ldd to still work on newer tagged PIE binaries.
Also move debug line for hashes before both decisions to not load are
done, so that the end of digest_dynamic() processing and reason to not
load or load is seen in debug trace.
Noted by: jhb
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Which makes all calls to load_object() to observe the flag, except the
calls for preloaded DSOs.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Rtld itself is a shared object which does not have vendor note, so
after the direct exec of ld-elf.so.1 process has p_osrel set to zero.
This affects the ABI of syscalls.
Set osrel to the __FreeBSD_version value at compile time right after
rtld identified direct exec mode. Then, switch to the osrel read from
the binary note or zero if no note, right before starting calling
ifunc resolvers, which is the first byte of the user code.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Linkers are supposed to mark PIE binaries with DF_1_PIE, such binary
cannot be correctly and usefully loaded neither by dlopen(3) nor as a
dependency of other object. For instance, we cannot do anything
useful with COPY relocations, among other things.
Glibc already added similar restriction.
Requested and reviewed by: emaste
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D25086
It is wrong to relate on __FreeBSD_version, either from
include/param.h, kernel, or libc, to check for rtld features.
Rtld might be from newer world than the running userspace.
Add special private symbols exported by rtld itself, to indicate the
changes in runtime behavior, and features that cannot be otherwise
detected or deduced at runtime.
Note that the symbols are not exported from libc, so they intentionally
cannot be linked against, and exported from the private namespace from rtld.
Consumers are required to use dlsym(3). For instance, for
_rtld_version_laddr_offset, user should do
ptr = dlsym(RTLD_DEFAULT, "_rtld_version_laddr_offset")
or even
ptr = dlvsym(RTLD_DEFAULT, "_rtld_version_laddr_offset",
"FBSDprivate_1.0");
Non-null ptr means that the change is present.
Also add _rtld_version__FreeBSD_version indicator to report the
headers version used at time of the rtld build.
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D24982
Keep link_map l_addr binary layout compatible, rename l_addr to l_base
where rtld returns map base. Provide relocbase in newly added l_addr.
This effectively reverts the patch to the initial version of D24918.
Reported by: antoine (portmgr)
Reviewed by: jhb, markj
Tested by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D24946
It previously returned the object map base address, while all other
ELF operating systems return load offset, i.e. the difference between
map base and the link base.
Explain the meaning of the field in the man page.
Stop filling the mips-only l_offs member, which is apparently unused.
PR: 246561
Requested by: Damjan Jovanovic <damjan.jov@gmail.com>
Reviewed by: emaste, jhb, cem (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D24918
Prior to this change, using lagg to aggregate wired and wireless networks
was broken in the (relatively common) case where wifi drivers + firmware
are loaded by devmatch, since the interface didn't exist at the time when
the lagg interface was being created.
Suggested by: imp
MFC after: 3 days
Assume gcc is at least 6.4, the oldest xtoolchain in the ports tree.
Assume clang is at least 6, which was in 11.2-RELEASE. Drop conditions
for older compilers.
Reviewed by: imp (earlier version), emaste, jhb
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D24802
Clang10 may use FPU instructions for optimizing operations with
memory blocks. But we don't want to do lengthy save/restore of all
FPU registers across each rtld_start() call.
MFC after: 3 week
For PIE binaries, ldd(1) performs dlopen(RTLD_TRACE) on the binary.
It is legal for binary to use initial exec TLS mode, but when such
binary (actually dso) is dlopened, we might not have enough free space
in the finalized static TLS segment. Make ldd operational by skipping
TLS space allocation, we are not going to execute any code from the
dso anyway.
Reported by: tobik
PR: 245677
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
