Commit Graph

87 Commits

Author SHA1 Message Date
Brian Somers
6eafd35305 Include the correct file (stdarg.h) and use va_list rather than _BSD_VA_LIST_
Suggested by: mike
2002-08-27 20:11:58 +00:00
Brian Somers
30949fd4b5 o Add ipv6 support, abstracting most NCP addresses into opaque
structures (well, they're treated as opaque).

  It's now possible to manage IPv6 interface addresses and routing
  table entries and to filter IPV6 traffic whether encapsulated or
  not.

  IPV6CP support is crude for now, and hasn't been tested against
  any other implementations.

  RADIUS and IPv6 are independent of eachother for now.

  ppp.linkup/ppp.linkdown aren't currently used by IPV6CP

o Understand all protocols(5) in filter rules rather than only a select
  few.

o Allow a mask specification for the ``delete'' command.  It's now
  possible to specifically delete one of two conflicting routes.

o When creating and deleting proxy arp entries, do it for all IPv4
  interface addresses rather than doing it just for the ``current''
  peer address.

o When iface-alias isn't in effect, don't blow away manually (via ``iface
  add'') added interface addresses.

o When listening on a tcp server (diagnostic) socket, bind so that a
  tcp46 socket is created -- allowing both IPv4 and IPv6 connections.

o When displaying ICMP traffic, don't display the icmp type twice.
  When display traffic, display at least some information about unrecognised
  traffic.

o Bump version

Inspired after filtering work by: Makoto MATSUSHITA <matusita@jp.FreeBSD.org>
2001-08-14 16:05:52 +00:00
Brian Somers
65309e5cda Convert IIJ copyrights to BSD copyrights.
Approved by: Toshiharu OHNO <tohno@sirius.ocn.ne.jp>
2001-06-13 21:52:19 +00:00
Brian Somers
26af0ae966 Cosmetic: Make struct mbuf more like kernel mbufs. 1999-12-20 20:29:47 +00:00
Peter Wemm
97d92980a9 $Id$ -> $FreeBSD$ 1999-08-28 01:35:59 +00:00
Brian Somers
eb6e5e05f9 Add ISDN support via isdnd & i4b. This requires version
0.81.1 of the i4b code - namely support of the I4B_VR_REQ
ioctl via the i4brbchX device.

Ppp controls the phone number, but idle timers and
SYNC/RAW decisions are still made by isdnd (in isdnd.rc).

This involves a new datalink state machine phase.  The
``wait for carrier'' phase happens after dialing but
before logging in.  The whole dial state should really
be abstracted so that each device type can deal with it
in its own way (thinking about PPPoE) - but that'll have
to wait.

The ``set cd'' symantics remain the same for tty devices,
but we now delay until we either get CD or timeout waiting
(at which time we drop the link if we require CD).

For i4b devices we always insist on carrier.

Thanks to hm@ for his help, and especially for pointing out
that I *don't* need to re-implement isdnd (that was a huge
waste of time !) :-]
1999-08-06 20:04:08 +00:00
Brian Somers
411675bae3 o Alter the mbuf type as it's processed by different layers.
o Show more information about missing MP fragments in ``show mp''.
o Do away with mbuf_Log().  It was showing mbuf stats twice on
  receipt of LCP/CCP/IPCP packets.... ???!!?
o Pre-allocate a bit extra when creating LQR packets to avoid having
  to allocate another mbuf in mbuf_Prepend().
1999-06-02 15:59:09 +00:00
Brian Somers
5d9e610366 o Redesign the layering mechanism and make the aliasing code part of
the layering.

  We now ``stack'' layers as soon as we open the device (when we figure
  out what we're dealing with).  A static set of `dispatch' routines are
  also declared for dealing with incoming packets after they've been
  `pulled' up through the stacked layers.

  Physical devices are now assigned handlers based on the device type
  when they're opened.  For the moment there are three device types;
  ttys, execs and tcps.

o Increment version number to 2.2
o Make an entry in [uw]tmp for non-tty -direct invocations (after
  pap/chap authentication).
o Make throughput counters quad_t's
o Account for the absolute number of mbuf malloc()s and free()s in
  ``show mem''.
o ``show modem'' becomes ``show physical''.
1999-05-08 11:07:56 +00:00
Brian Somers
e304484545 Handle the detection of frames even if we read them
with more than one read().  When we detect one, don't
forget to pass it to async_Input() and drop our
terminal back into command mode.

Don't output an extraneous \r if we're passed \r\n
to prompt_vprintf in raw mode.
1999-04-03 11:54:00 +00:00
Brian Somers
aad80d9f1b Ensure that the thing we're casting to struct ip
is aligned for non-i386 architectures.
1999-03-29 08:21:28 +00:00
Brian Somers
58330d7bfa When resending chap challenges, resend the same challenge
each time rather than making up a new one.

Increase the authname/authkey max sizes to 100 characters.

Allow ``authkey'' specifications beginning with ``!''.
When a challenge is received, the text following the
``!'' is executed as a program (expanding stuff in the same
way that ``sh'' and ``!bg'' do).  The program is passed the
peer name, peer challenge and local ``authname'' on standard
input and is expected to output the name/key combination that
should be used to build the CHAP response.

This provides support for Secure ID cards (guess what I was
given at work recently!) using CHAP.

Examples will follow.
1999-02-11 10:14:08 +00:00
Brian Somers
f0cdd9c021 Decouple pap & chap output routines from the corresponding
input routines and take advantage of the new init/continue
interface in libradius.  This allows a timely response on
other links in an MP setup while RADIUS requests are in
progress as well as the ability to handle other data from
the peer in parallel.  It should also make the future addition
of PAM support trivial.

While I'm in there, validate pap & chap header IDs if
``idcheck'' is enabled (the default) for other FSM packet
types.

NOTE: This involved integrating the generation of chap
      challenges and the validation of chap responses
      (and commenting what's going on in those routines).
      I currently have no way of testing ppps ability
      to respond to M$Chap CHALLENGEs correctly, so if
      someone could do the honours, it'd be much
      appreciated (it *looks* ok!).

Sponsored by: Internet Business Solutions Ltd., Switzerland
1999-02-06 02:54:47 +00:00
Brian Somers
972a1bcf5d Initial RADIUS support (using libradius). See the man page for
details.  Compiling with -DNORADIUS (the default for `release')
removes support.

TODO: The functionality in libradius::rad_send_request() needs
      to be supplied as a set of routines so that ppp doesn't
      have to wait indefinitely for the radius server(s).  Instead,
      we need to get a descriptor back, select() on the descriptor,
      and ask libradius to service it when necessary.
      For now, ppp blocks SIGALRM while in rad_send_request(), so
      it misses PAP/CHAP retries & timeouts if they occur.

      Only PAP is functional.  When CHAP is attempted, libradius
      complains that no User-Password has been specified... rfc2138
      says that it *mustn't* be used for CHAP :-(

Sponsored by: Internet Business Solutions Ltd., Switzerland
1999-01-28 01:56:34 +00:00
Brian Somers
92b0955883 o Support callback types NONE, E.164, AUTH and CBCP.
(see the new ``set callback'' and ``set cbcp'' commands)
o Add a ``cbcp'' log level and mbuf type.
o Don't dump core when \T is given in ``set login'' or
  ``set hangup''.
o Allow ``*'' and blanks as placeholders in ppp.secret and
  allow a fifth field for specifying auth/cbcp dialback
  parameters.
o Remove a few extraneous #includes
o Define the default number of REQs (restart counter) in defs.h
  rather than hardcoding ``5'' all over the place.
o Fix a few man page inconsistencies.
1998-08-07 18:42:51 +00:00
Brian Somers
cff2b1c9b4 Cosmetic: Diagnostic wording (Unknown -> Unexpected) 1998-08-01 01:02:12 +00:00
Brian Somers
3a2e4f621c o Fix remaining sizeof problems for 64 bit machines.
o Allow ``set ....'' when we have multiple links but aren't in
  multilink mode.
o Do a TLS when we receive a ``Open'' event in ``Closed'' state,
  despite the rfc state transition table.  This is clearly an
  error in the RFC as TLS cannot have yet been called (without
  TLF) in the ``Closed'' state.
  I've posted a message to comp.protocols.ppp for confirmation.
1998-06-27 23:48:54 +00:00
Brian Somers
a33b2ef772 Change some log levels. ALERTs are only logged when
something that can't happen happens or when everyone
needs to know.  ERRORs are only logged when something
unexpected happens.
1998-06-16 19:40:42 +00:00
Brian Somers
c9e11a112d Fix a rather nasty use of `static'. This caused a SEGV
when running ``link * load label'' as we ended up recursing
back into command_Interpret after nuking our command arg list.
1998-06-15 19:06:25 +00:00
Brian Somers
d91d286164 MFMP: Make ppp multilink capable.
See the file README.changes, and re-read the man page.
1998-05-21 21:49:08 +00:00
Brian Somers
641684cdba Don't accept IPCP packets before NETWORK phase.
Pointed out by: Ralf Rutherford <ralf@philips.oz.au>
1998-05-21 01:26:10 +00:00
Brian Somers
0a1b5c9d9e o Activate link-level CCPs in multilink mode, by bringing them
into the ST_STOPPED state.
o Allow an optional ccp|lcp argument to `down'.  The default is
  still lcp (as before).  You can now call down with no context
  in multilink mode, in which case it'll down the multilink ccp
  or the entire bundle (*very* rude).
o Allow an optional `!' after `close ccp' (close ccp!) to tell
  ccp to stay in the CLOSED state after the terminate ACK.  The
  default is now to re-enter STOPPED so that the peer can bring
  the layer back up if desired.
o Always handle proto-compressed packets, even if we've agreed
  (in LCP) that the peer will not send us 1 byte protocols.
  If the peer violates the LCP agreement, log it to the HDLC
  log.
o Fix some comments.
1998-05-15 18:21:12 +00:00
Brian Somers
66f634b6df o Do an mp_Down() when aborting ppp.
o Re-assign the link name when strdup()ing the datalink name.
o Add the link name to some more hdlc log messages.
1998-05-11 23:39:30 +00:00
Brian Somers
b7c5748e5e o Rename datalinks as soon as the name has been received so that
LQM and HDLC timer diagnostics come out with the correct name.
o Don't send an LQR immediately upon reviving a datalink.  Leave
  it 'till the next timeout.
o Add the link name to some more LQR diagnostics.
o Break out of the main loop when a descriptor exception is seen
  in select().
o Remove the evil nointr_[u]sleep() functions.  Timers should be
  (and are) used instead.
o Treat a read() of 0 bytes as an error that's fatal to the link
  on which the read() is done.  We should never read() 0 after
  select() says there's something there - not unless the link
  has been closed by the other side.
o Write the data seen before a HDLC header to the terminal in
  `term' mode, *not* back to the modem :-/
o Initialise our transmitted file descriptor before starting any
  timers.
o Only send data links that have *no* pending output data.  This
  means that our final ACK will be written rather than being
  nuked with the datalink transmission.
1998-05-08 01:15:19 +00:00
Brian Somers
147613eadf o Increment expected MP fragment numbers correctly,
according to SHORTSEQ negotiation.
o Don't forget to attach incoming fragments with a
  number greater than everything else in the queue
  (rather than leaking memory).
o Output the link name with the ``other'' hdlc
  diagnostic message.
o Correct a VJ diagnostic (`COMPPROTO', not `proto').
1998-05-04 03:00:09 +00:00
Brian Somers
6e7cdde1a2 o Mention our link name with timed HDLC error reports.
o Switch off our carrier detect timer if we don't have
  CD after logging in.
o Maintain our CD timer after a link transfer.
1998-05-03 11:24:16 +00:00
Brian Somers
dd7e261079 Cosmetic: Make our external function names consistent. 1998-05-01 19:26:12 +00:00
Brian Somers
1fa665f5b3 o Add the link name to modem diagnostics.
o Create struct mpserver as part of struct mp.
  mpserver creates a unix-domain socket based on the
  peers auth name and endpoint discriminator.  If it
  already exists, ppp will ``pass the link'' over to
  the owner of the socket, joining it into the bundle
  of another ppp invocation, otherwise ppp waits for
  other invocations to pass it links through this
  socket.
  The final piece of code will be the code that flattens
  our datalink info and passes it down this channel
  (not yet implemented).
1998-04-28 01:25:46 +00:00
Brian Somers
643f49047e o Defer setting up pap/chap based IP numbers & labels until after
we've determined if we're going to join another ppp invocation.
o Make ``show link'' show all link details, and ``show links''
  just give a list of links and their current status.
o Show our current label in ``show bundle''.
o Allow link cloning and removal as soon as our MRRU is set.
o Make ``show lcp'' require context as nothing will ever change
  in our MP LCP (it's auto-configured as per rfc1990).
o Initialise our LQM owner in hdlc_Init().
o Store our endpoint discriminator and authentication name at both
  the datalink and multilink level and compare them when we've
  finished AUTHENTICATE phase and before entering NETWORK phase.
  If they don't match, close the link again.
  Display the information in the appropriate ``show'' command.
o Initialise datalink::phone and datalink::fsmp.object properly
  when we're cloning the link.
o Show which link we're passing LQRs on in our diagnostics.
o Reject endpoint discriminator REQs at the logical multilink
  level.
o Remove the rest of our CARRIER and LINK logging setup.
1998-04-24 19:16:15 +00:00
Brian Somers
673903ec42 o Initialise MP correctly depending on if we're the
first link in mp_Up().
o Bring MP and its CCP down when we enter phase TERMINATE,
  and ditch everything in the incoming packet queue.
o Enable MRRU negotiation.  Now, we can multilink
  mode, but only with one physical link.
o Close the link if the peer PROTO REJs PROTO_MP.
o Prepend our protocol before passing a packet to
  struct mp for fragmentation.
o Log info messages to DEBUG, not ERROR (oops).
o Align `show mp' output (again).
1998-04-23 21:50:13 +00:00
Brian Somers
e3c70ce931 Tidy up the use of struct pppTimer. 1998-04-19 15:24:50 +00:00
Brian Somers
cdbbb6b571 Cosmetic: Clean up warnings. 1998-04-18 01:01:28 +00:00
Brian Somers
2764b86afd o Move alias function pointers into loadalias.c
o Move Var*Version into command.c
o Remove struct pppVars (and there was much rejoicing) !
o Forward-decl some structs in .h files to avoid include
  ordering requirements and remove a few more redundant
  #includes.
1998-04-07 00:54:26 +00:00
Brian Somers
d24f017be8 Remove unused includes. 1998-04-06 09:12:38 +00:00
Brian Somers
b6217683dc Deglobalise `struct prompt':
o Our diagnostic socket has its password set in the `set socket'
    line only (not in ppp.secret).
  o Passwords are per server socket (*VarAuthKey are gone)
  o Authority is per prompt (VarLocalAuth is gone).
  o Local logging is per prompt.
  o Add a `show who' command to see who's connected.  No identd
    routine - just a `where the connection came from' display.
  o SIGUSR1 is disabled for now - we have no way of choosing a
    password for the socket created :-(

Prompts are attached as a list of `struct descriptor's in
struct bundle, and serviced under the bundles descriptor
service routines.  Ultimately, everything should be done
like this.

Cosmetic:
  o alphabeticalise SRCS in Makefile.
  o Add a few comments in command.h

TODO: Start checking that we don't overflow the descriptor sets
      in select() now that we can have any number of descriptors.
1998-04-03 19:26:02 +00:00
Brian Somers
3b0f8d2ed6 o Move struct lcp and struct ccp into struct link.
o Remove bundle2lcp(), bundle2ccp() and bundle2link().
  They're too resource-hungry and we have `owner pointers'
  to do their job.
o Make our FSM understand LCPs that are always ST_OPENED
  (with a minimum code that != 1).
o Send FSM code rejects for invalid codes.
o Make our bundle fsm_parent deal with multiple links.
o Make timer diagnostics pretty and allow access via ~t
  in `term' mode (not just when logging debug) and
  `show timers'.  Only show timers every second in debug
  mode, otherwise we get too many diagnostics to be useful
  (we probably still do).  Also, don't restrict ~m in term
  mode to depend on debug logging.
o Rationalise our bundles' phases.
o Create struct mp (multilink protocol).  This is both an
  NCP and a type of struct link.  It feeds off other NCPs
  for output, passing fragmented packets into the queues
  of available datalinks.  It also gets PROTO_MP input,
  reassembles the fragments into ppp frames, and passes
  them back to the HDLC layer that the fragments were passed
  from.
  ** It's not yet possible to enter multilink mode :-( **
o Add `set weight' (requires context) for deciding on a links
  weighting in multilink mode.  Weighting is simplistic (and
  probably badly implemented) for now.
o Remove the function pointers in struct link.  They ended up
  only applying to physical links.
o Configure our tun device with an MTU equal to the MRU from
  struct mp's LCP and a speed equal to the sum of our link
  speeds.
o `show {lcp,ccp,proto}' and `set deflate' now have optional
  context and use ChooseLink() to decide on which `struct link'
  to use.  This allows behaviour as before when in non-multilink
  mode, and allows access to the MP logical link in multilink
  mode.
o Ignore reconnect and redial values when in -direct mode and
  when cleaning up.  Always redial when in -ddial or -dedicated
  mode (unless cleaning up).
o Tell our links to `staydown' when we close them due to a signal.
o Remove remaining `#ifdef SIGALRM's (ppp doesn't function without
  alarms).
o Don't bother strdup()ing our physical link name.
o Various other cosmetic changes.
1998-04-03 19:21:56 +00:00
Brian Somers
eaa4df37f4 Move VJ compression state and stats into struct ipcp. 1998-03-16 22:54:35 +00:00
Brian Somers
5ca5389af4 Move filter sets into struct bundle. 1998-03-16 22:52:54 +00:00
Brian Somers
5828db6d2d Move the IPCP into struct bundle. 1998-03-13 21:07:46 +00:00
Brian Somers
a611cad61d o Don't immediately reply to the first LQR thinking
it's a duplicate ('cos it compares with our initial
  values).
o Move the LCP into struct datalink.
1998-03-13 21:07:14 +00:00
Brian Somers
c4c4aaacea Add extraneous braces to stiffle warnings from gcc-2.8 1998-03-13 01:36:10 +00:00
Brian Somers
dc0fdb6bc1 "dial" now may optionally have context.
Tidy up some LcpInfo uses.
1998-03-13 00:44:51 +00:00
Brian Somers
879ed6fa82 De-staticise LQR information
Increment OutPackets for any packet - not just LQRs

MFC:
  o Fix a few comment typos.
  o Fix ``set timeout'' usage message and documentation.
  o Change ifOutPackets, ifOutOctets and ifOutLQRs to `u_int32_t's
    so that they wrap correctly.
  o Put the LQR in network byte order using the correct struct size
    (sizeof u_int32_t, not sizeof u_long).
  o Wrap LQR ECHO counters correctly.
  o Don't increment OutLQR count if the last LQR hasn't been replied
    to.
  o Initialise last received LQR in StartLqm.
  o Don't start the LQR timer if we're `disabled' and `accepted'.
  o Generate LQR responses when both sides are using a timer and
    we're not going to send our next LQR before the peers max timeout.
1998-03-13 00:44:26 +00:00
Brian Somers
f830032fc8 o Fix a few comment typos.
o Fix ``set timeout'' usage message and documentation.
o Change ifOutPackets, ifOutOctets and ifOutLQRs to `u_int32_t's
  so that they wrap correctly.
o Put the LQR in network byte order using the correct struct size
  (sizeof u_int32_t, not sizeof u_long).
o Wrap LQR ECHO counters correctly.
o Don't increment OutLQR count if the last LQR hasn't been replied
  to.
o Initialise HisLqrData (last received LQR) in StartLqm.
o Don't start the LQR timer if we're `disabled' and `accepted'.
o Generate LQR responses when both sides are using a timer and
  we're not going to send our next LQR before the peers max timeout.

LQR should now be fully functional.
1998-03-12 02:23:42 +00:00
Brian Somers
e2ebb036fd Do authentication at the datalink level, not the bundle level.
The bundle doesn't get a LayerUp 'till we're authenticated.

Introduce DATALINK_LCP and DATALINK_AUTH phases.
1998-03-01 01:07:49 +00:00
Brian Somers
f4768038f0 o Remove the global CcpInfo. It's now part of the datalink.
Struct bundle will have its own struct ccp in the future
  too.
o The ``set stopped'' command now requires context and doesn't
  work on the IPCP FSM.
o Check if it's time to break out of our top level loop before
  doing a select - otherwise, we'll select forever :-(
o Remove `struct link'::ccp (a temporary hack).  It turns out
  that IpStartOutput() calls link_Output() and link_Output()
  incorrectly calls StartOutput() (really modem_StartOutput)
  requiring the ccp knowledge so that it can call
  IpStartOutput()...  The end result is that the whole IP
  output queue gets dumped into the modem output queue
  and a pile of physical writes are done prematurely.  This
  makes the (original) code in main() actually work in that
  it would not bother selecting() on the tun descriptor when
  our modem queue length was 20 or greater.  Instead, we now
  make that decision based on the overall queue length.

  This will need improvement later.
1998-02-23 00:38:44 +00:00
Brian Somers
503a7782d8 Shuffle around our FSMs a bit. This'll make it
easier to remove the CcpInfo, LcpInfo and IpcpInfo
globals.
1998-02-21 01:45:26 +00:00
Brian Somers
ee6c193f92 o Fix an obscure memory leak (if the peer sends PROTO_COMPD
packets when we haven't agreed a protocol).
o Move the complication of passing incoming data to the
  PROTO_COMPD input or dictionary setup routine into ccp.c
1998-02-18 19:36:13 +00:00
Brian Somers
63258dccc5 o Create `struct hdlc' - a part of struct physical.
o Move our LCP report timer into struct hdlc - it's really
  a hdlc timer (fcs errors etc).
o Make `show hdlc' require context and make the output more
  friendly.
o Remove all non-const globals from hdlc.c
o Output peer-rejected protocols by name - not just ones
  that we reject.
1998-02-18 19:35:59 +00:00
Brian Somers
9991562d36 Make ``show escape'' require context.
De-globalize EscMap[].
1998-02-18 19:35:20 +00:00
Brian Somers
85b542cf4f Move the terminal/diagnostic socket stuff out of main.c
and into the new `prompt.c'.  struct prompt is (of course)
a `sort' of descriptor.
1998-02-10 03:23:50 +00:00