Commit Graph

34 Commits

Author SHA1 Message Date
David E. O'Brien
12ea2cfe2e Use __FBSDID().
Brought to you by:	a boring talk at OLS
2003-07-25 21:10:19 +00:00
Peter Wemm
ff7bf2f72e Port acpica to amd64.
Approved by:  re (amd64/* blanket)
2003-05-31 06:47:05 +00:00
Peter Wemm
afa8862328 Commit MD parts of a loosely functional AMD64 port. This is based on
a heavily stripped down FreeBSD/i386 (brutally stripped down actually) to
attempt to get a stable base to start from.  There is a lot missing still.
Worth noting:
- The kernel runs at 1GB in order to cheat with the pmap code.  pmap uses
  a variation of the PAE code in order to avoid having to worry about 4
  levels of page tables yet.
- It boots in 64 bit "long mode" with a tiny trampoline embedded in the
  i386 loader.  This simplifies locore.s greatly.
- There are still quite a few fragments of i386-specific code that have
  not been translated yet, and some that I cheated and wrote dumb C
  versions of (bcopy etc).
- It has both int 0x80 for syscalls (but using registers for argument
  passing, as is native on the amd64 ABI), and the 'syscall' instruction
  for syscalls.  int 0x80 preserves all registers, 'syscall' does not.
- I have tried to minimize looking at the NetBSD code, except in a couple
  of places (eg: to find which register they use to replace the trashed
  %rcx register in the syscall instruction).  As a result, there is not a
  lot of similarity.  I did look at NetBSD a few times while debugging to
  get some ideas about what I might have done wrong in my first attempt.
2003-05-01 01:05:25 +00:00
Jake Burkholder
227f9a1c58 - Add vm_paddr_t, a physical address type. This is required for systems
where physical addresses larger than virtual addresses, such as i386s
  with PAE.
- Use this to represent physical addresses in the MI vm system and in the
  i386 pmap code.  This also changes the paddr parameter to d_mmap_t.
- Fix printf formats to handle physical addresses >4G in the i386 memory
  detection code, and due to kvtop returning vm_paddr_t instead of u_long.

Note that this is a name change only; vm_paddr_t is still the same as
vm_offset_t on all currently supported platforms.

Sponsored by:	DARPA, Network Associates Laboratories
Discussed with:	re, phk (cdevsw change)
2003-03-25 00:07:06 +00:00
Matthew N. Dodd
b7b5ae3edb Use repo-copied files in sys/i386/bios. 2003-03-24 19:14:46 +00:00
Poul-Henning Kamp
7ac40f5f59 Gigacommit to improve device-driver source compatibility between
branches:

Initialize struct cdevsw using C99 sparse initializtion and remove
all initializations to default values.

This patch is automatically generated and has been tested by compiling
LINT with all the fields in struct cdevsw in reverse order on alpha,
sparc64 and i386.

Approved by:    re(scottl)
2003-03-03 12:15:54 +00:00
Marcel Moolenaar
91c71b46ed Export the physical address of the RSDP to userland by means
of the `machdep.acpi_root' sysctl. This is required on ia64
because the root pointer hardly ever, if at all, lives in the
first MB of memory and also because scanning the first MB of
memory can cause machine checks.
This provides a save and reliable way for ACPI tools to work
with the tables if ACPI support is present in the kernel. On
ia64 ACPI is non-optional.
2002-12-18 08:47:07 +00:00
Alan Cox
a597332c22 Hold the page queues lock around calls to pmap_remove().
Approved by:	re
2002-12-04 18:40:39 +00:00
Mitsuru IWASAKI
87b45ed576 Add `if (!cold)' checkings for functions which is called via SYSINIT.
Loading acpi.ko with kldload is disallowed, however some
functions were executed unexpectedly.

Approved by:	re
2002-11-24 02:27:07 +00:00
John Baldwin
ebff7660a3 *sigh*. It seems that in the ACPICA code, Intel defines its own APIC_IO
macro for use when parsing MADT tables, thus we always tried to set the
interrupt model to APIC.  This proved to be harmful on UP machines with
IO APIC's (or for UP kernels on SMP machines) since the wrong interrupt
routing information would be returned.

Pointy hat to:	jhb
Approved by:	re (rwatson)
2002-11-21 20:55:22 +00:00
John Baldwin
90fa95e81d - curproc may be NULL in 4-stable. In that case use the vmspace from
proc0.
- Remove unused include.

Sponsored by:	The Weather Channel
2002-10-16 17:22:03 +00:00
John Baldwin
42233ad3af Include <sys/select.h> on -stable instead of <sys/selinfo.h> to get the
definition of struct selinfo.

Sponsored by:	The Weather Channel
2002-10-16 17:20:43 +00:00
John Baldwin
6b4d1b08a2 Use d_thread_t for cdevsw functions instead of struct thread * so that it
is easier to share this code with 4-stable.
2002-10-09 20:39:26 +00:00
John Baldwin
31a51bf683 Trash the PnPBIOStable pointer later on when we know that the acpi probe
and attach routines have succeeded so that if they fail we can still use
the PnP BIOS to find ISA on-board devices.  The fact that we do this here
is gross but fixing it properly involves a lot more work.
2002-09-30 18:45:20 +00:00
Mark Murray
c7c7312f2c Wrap GCC-specific asm() code in #ifdef __GNUC__ 2002-09-21 18:19:51 +00:00
John Baldwin
d3b9beba04 If we are using APIC_IO tell ACPI so it can route interrupts properly.
This still doesn't work quite right because of other APIC_IO hacks in
the i386 PCI code.
2002-09-06 17:02:01 +00:00
Archie Cobbs
4a6a94d8d8 Replace (ab)uses of "NULL" where "0" is really meant. 2002-08-22 21:24:01 +00:00
Mitsuru IWASAKI
be14b8e7ea Improve stack manipulation code of ACPI wakeup routine.
The new code just override stack top value with saved return address
rather than pop/push operation.

Submitted by:	jhb
2002-08-07 12:48:28 +00:00
Mitsuru IWASAKI
6a7ef08763 Fix a bug about stack manipulation at ACPI wakeup.
This should avoid kernel panic on kernel compiled w/o
NO_CPU_COPTFLAGS.

Suggested by:	optimized code by -mcpu=pentiumpro
2002-08-01 09:48:01 +00:00
Mitsuru IWASAKI
74fc979a09 Resolve conflicts arising from the ACPI CA 20020404 import. 2002-06-30 17:53:12 +00:00
Peter Wemm
b2604e1cf1 Make this compile with gcc-3.1, which objects to the multi-line string. 2002-05-19 06:42:29 +00:00
Wes Peters
9539704639 Fix typo in function name.
Reviewed by:	peter@
Obtained from:	mux@sneakerz.org
2002-01-10 03:26:46 +00:00
Takanori Watanabe
89b8315762 Fix S3 breakage.
Now AcpiEnterSleep() is light enough, so flushing cache
before the function is not too early.
2002-01-09 16:00:31 +00:00
Mike Smith
3273b00523 Staticise devclasses and some unnecessarily global variables. 2002-01-08 06:46:01 +00:00
Mitsuru IWASAKI
430f5c92b6 Yet another verbose printing cleanup. Remove debug_wakeup flag and
check common verbose flag instead.
2001-11-18 18:48:31 +00:00
Mitsuru IWASAKI
9c4223b4b6 Add two minor changes.
- clean up wakeup routing fixup code by using macros.
 - allocate pte object temporary for kernel thread to avoid kernel
   panic by events from sleep button or lid switch.
2001-11-11 15:51:30 +00:00
Mitsuru IWASAKI
1611ea8727 Add S4BIOS sleep (BIOS hibernation) and DSDT overriding support.
- Add S4BIOS sleep implementation.  This will works well if MIB
   hw.acpi.s4bios is set (and of course BIOS supports it and hibernation
   is enabled correctly).
 - Add DSDT overriding support which is submitted by takawata originally.
   If loader tunable acpi_dsdt_load="YES" and DSDT file is set to
   acpi_dsdt_name (default DSDT file name is /boot/acpi_dsdt.aml),
   ACPI CA core loads DSDT from given file rather than BIOS memory block.
   DSDT file can be generated by iasl in ports/devel/acpicatools/.
 - Add new files so that we can add our proposed additional code to Intel
   ACPI CA into these files temporary.  They will be removed when
   similar code is added into ACPI CA officially.
2001-11-06 15:00:30 +00:00
Mitsuru IWASAKI
f86214b6b8 Add APM compatibility feature to ACPI.
This emulates APM device node interface APIs (mainly ioctl) and
provides APM services for the applications.  The goal is to support
most of APM applications without any changes.
Implemented ioctls in this commit are:
 - APMIO_SUSPEND (mapped ACPI S3 as default but changable by sysctl)
 - APMIO_STANDBY (mapped ACPI S1 as default but changable by sysctl)
 - APMIO_GETINFO and APMIO_GETINFO_OLD
 - APMIO_GETPWSTATUS

With above, many APM applications which get batteries, ac-line
info. and transition the system into suspend/standby mode (such as
wmapm, xbatt) should work with ACPI enabled kernel (if ACPI works well :-)

Reviewed by:	arch@, audit@ and some guys
2001-10-26 17:43:05 +00:00
Mike Smith
42df599f7b Now that this code is MD, we don't need the i386 ifdefs. 2001-09-07 03:00:30 +00:00
Mitsuru IWASAKI
56d8cb57b9 Don't do sleep state transition if specified sleep state is not
supported by the system.
2001-07-22 19:13:54 +00:00
Mike Smith
bfae45aa43 Convert from acpi_strerror() to AcpiFormatException()
Fix dangling include of the dear departed acpi_ecreg.h
2001-07-21 10:24:37 +00:00
Mike Smith
9d839ea8e4 Update the OSD module to match the ACPI CA 20010717 import.
Submitted by:	"Grover, Andrew" <andrew.grover@intel.com> (OsdHardware.c)
2001-07-21 04:10:01 +00:00
Takanori Watanabe
6161544ca7 Add ACPI S2-S4BIOS Suspend/Resume code.
Some problems may remain.

Reviewed by:iwasaki
2001-07-20 06:07:34 +00:00
Mike Smith
fd660059d9 FreeBSD-specific OSD (operating system dependant) modules for the Intel
ACPICA code.
2000-10-28 06:56:15 +00:00