o Add Agere Hermes II and II.5 PC Cards (from zipit web page), TDK
GlobalNetworker 3410 (from dmesg for my card) and another alternate
PANASONIC KXLC0005_2 (from pcmcia-cs id lists).
problems we were having properly mapping the CIS attr space on some
cards. Those problems have been solved other ways, so this kludge is
no longer necessary. Remove it and have pccards come up a whole
second faster.
implement the OHCI programming interface. Thus it probes, but fails
to attach because of an invalid OHCI version. Rather than count on
the downstream tests properly failing, print a message that this
chipset isn't supported and fail the probe.
16-bit cards when we're powering them up. Other bridges may have
similar issues, so we do this for all of them by setting the
interrupt in the PCIC register 3 to be 0 (done always anyway)
and turning on the bit in the bridge control register to route these
interrupts via the ISA bus (or via the interrupt configured in the
PCIC register 3). '0' means disable completely. There's a small
chance this may interfere with the o2micro power hacks, but I'll
wait for reports to come in from o2micro users.
o Expand some of the comments about why we do certain things.
# this gets rid of the interrupt storm warnings on my 505TS. I think
# that we may need to do something similar on suspend, but I'm unsure
# since I don't have a laptop that supports suspened/resume with a
# ricoh chipset in it.
card. Mask it while we're doing power things, as the PC Card standard
suggests. Also, poll the POWER_CYCLE bit 10x a second as well as
providing a timeout for power cycle interrupt to happen.
The Ricoh '475 that I have doesn't seem to generate an interrupt for
power at the present time, so the polling is necessary for reasons as
yet unknown. This results in an interrupt storm warning that I'm
still trying to quantify (the o2micro trick doesn't work to mitigate
this storm). At the very least, this should help those users that
lost pccards on boot with the prior rev of this code. My VAIO
PCG-505TS is now happier, but more investigation is necessary.
variables rather than void * variables. This makes it easier and simpler
to get asm constraints and volatile keywords correct.
MFC after: 3 days
Tested on: i386, alpha, sparc64
Compiled on: ia64, powerpc, amd64
Kernel toolchain busted on: arm
succeed. There are many printers that return status over the read
channel, and if we wait for the status to become ready, then we can't
find the status automatically. Linux doesn't wait, nor does it ever
seem to really check the status in any meaningful way... If there
really is a problem, the writes to the bulk out endpoint will still
fail (like they would if the printer was ready and then ran out of
paper or became unready).
In addition, there are a number of printers being made that emulate
the 'status' byte by returning '0' always rather than '0x18'. This
fixes the EBUSY on open timeouts on those printer as well.
Reviewed by: the defining silence on usb@
gets the ethernet part of the card working, while putting appropriate
hooks in place for the modem code. Other ed based lan/modem combo
cards should be easy to add. Please send me info on any you'd like to
see support added.
Note: The 650 isn't a strictly conforming multi-function card, so
special support is needed. :-(
o Slightly change KBADDKBD and KBRELKBD ioctl() interface. Instead of passing
keyboard index pass keyboard_info_t structure with populated 'kb_unit' and
'kb_name' fields. Keyboard index is not very user-friendly and is not very
easy to obtain. Keyboard driver name and unit, on the other hand, is much
more user friendly and known almost all the time;
o Move definition of keyboard_info_t structure up;
o Teach kbdcontrol(1) how to attach/detach keyboards to/from the keyboard
multiplexor;
o Update kbdcontrol(1) man page and document new functionality.
To attach/detach keyboard to/from keyboard multiplexor one needs to use
keyboard device name (i.e. ukbd0).
MFC after: 1 week
o Don't busy wait on powerup. Instead, use the power up interrupt to wait
for the card to power up. Don't wait when we're turning the card off,
since no interrupt happens in that case.
o Convert many of the long DELAYs to tsleeps. We do not run before
the timer have stared, so DELAY isn't necessary. More DELAYs can likely
be eliminated in the future.
o When powering up the card, don't do anything if the card is already
powered up (before we'd power cycle it). This means that for most
cards we power them up once and then never change the power.
o On card eject, mask (by clearing) the CD bit. Before we set it, which
was wrong. We don't want to see any CD events past the first one since
they need to be debounced.
With these changes, I can insert/eject 16bit cards without glitching xmms'
sound output. Something very important to the development of better pccard
drivers :-)
o Add sys/dev/kbdmux/kbdmux.c to the source tree
o Add sys/modules/kbdmux/Makefile to the source tree
These are not yet connected to the build. Man page and other changes to follow.
MFC after: 1 week
channel devices. This should fix Dell 2450/2550/2650 systems that have RAID
enabled. This will likely not fix 2400 systems though as I don't have the
appropriate PCI Id info for them.
MFC After: 3 day
o Add two new ioctl's KBADDKBD and KBRELKBD. These are used to add and remove
keyboard to (and from) kbdmux(4) keyboard multiplexer;
o Introduce new kbd_find_keyboard2() function. It does exactly the same job
as kbd_find_keyboard() function except it allows to specify starting index.
This function can be used to iterate over keyboards array;
o Re-implement kbd_find_keyboard() as call to kbd_find_keyboard2() with starting
index of zero;
o Make sure syscons(4) passed KBADDKBD and KBRELKBD ioctl's onto currently
active keyboard.
These changes should not have any visible effect.
MFC after: 1 week
o Use pf more consistantly for pccard_function.
o Make sure we quote the strings properly (maybe this function belongs in
subr_bus.c)
o Tweak a comment to be more accurate after code changed.
and combine the old xe_pccard_{probe,attach} into one routine _attach.
Create a lookup function to lookup items in the table. Eliminate the
check for network cards, since many modems were eliminated by it.
Tweak a few printfs as well.
This gets many of my older cards working again CEM2, CEM28, CEM36,
etc.
support for them can really be added. Eliminate the check for network
card, because many of the cards in the commented out section are combo
cards and report themselves as either multifunction or modem. They
will be added back as I obtain hardware and test them more fully.
few other cards need. This firmware was obtained from the Linux
pcmica-cs project, but Ositech Communications, Inc has been kind
enough to grant permission to change the license to a pure BSDL type.
o Add timeout error recovery (from a thread context to avoid
the deferral of other critical interrupts).
o Properly recover commands across controller reset events.
o Update the driver to handle events and status codes that
have been added to the MPI spec since the driver was
originally written.
o Make the driver more modular to improve maintainability and
support dynamic "personality" registration (e.g. SCSI Initiator,
RAID, SAS, FC, etc).
o Shorten and simplify the common I/O path to improve driver
performance.
o Add RAID volume and RAID member state/settings reporting.
o Add periodic volume resynchronization status reporting.
o Add support for sysctl tunable resync rate, member write cache
enable, and volume transaction queue depth.
Sponsored by
----------------
Avid Technologies Inc:
SCSI error recovery, driver re-organization, update of MPI library
headers, portions of dynamic personality registration, and misc bug
fixes.
Wheel Open Technologies:
RAID event notification, RAID member pass-thru support, firmware
upload/download support, enhanced RAID resync speed, portions
of dynamic personality registration, and misc bug fixes.
Detailed Changes
================
mpt.c mpt_cam.c mpt_raid.c mpt_pci.c:
o Add support for personality modules. Each module exports
load, and unload module scope methods as well as probe, attach,
event, reset, shutdown, and detach per-device instance
methods
mpt.c mpt.h mpt_pci.c:
o The driver now associates a callback function (via an
index) with every transaction submitted to the controller.
This allows the main interrupt handler to absolve itself
of any knowledge of individual transaction/response types
by simply calling the callback function "registered" for
the transaction. We use a callback index instead of a
callback function pointer in each requests so we can
properly handle responses (e.g. event notifications)
that are not associated with a transaction. Personality
modules dynamically register their callbacks with the
driver core to receive the callback index to use for their
handlers.
o Move the interrupt handler into mpt.c. The ISR algorithm
is bus transport and OS independent and thus had no reason
to be in mpt_pci.c.
o Simplify configuration message reply handling by copying
reply frame data for the requester and storing completion
status in the original request structure.
o Add the mpt_complete_request_chain() helper method and use
it to implement reset handlers that must abort transactions.
o Keep track of all pending requests on the new
requests_pending_list in the softc.
o Add default handlers to mpt.c to handle generic event
notifications and controller reset activities. The event
handler code is largely the same as in the original driver.
The reset handler is new and terminates any pending transactions
with a status code indicating the controller needs to be
re-initialized.
o Add some endian support to the driver. A complete audit is
still required for this driver to have any hope of operating
in a big-endian environment.
o Use inttypes.h and __inline. Come closer to being style(9)
compliant.
o Remove extraneous use of typedefs.
o Convert request state from a strict enumeration to a series
of flags. This allows us to, for example, tag transactions
that have timed-out while retaining the state that the
transaction is still in-flight on the controller.
o Add mpt_wait_req() which allows a caller to poll or sleep
for the completion of a request. Use this to simplify
and factor code out from many initialization routines.
We also use this to sleep for task management request
completions in our CAM timeout handler.
mpt.c:
o Correct a bug in the event handler where request structures were
freed even if the request reply was marked as a continuation
reply. Continuation replies indicate that the controller still owns
the request and freeing these replies prematurely corrupted
controller state.
o Implement firmware upload and download. On controllers that do
not have dedicated NVRAM (as in the Sun v20/v40z), the firmware
image is downloaded to the controller by the system BIOS. This
image occupies precious controller RAM space until the host driver
fetches the image, reducing the number of concurrent I/Os the
controller can processes. The uploaded image is used to
re-program the controller during hard reset events since the
controller cannot fetch the firmware on its own. Implementing this
feature allows much higher queue depths when RAID volumes
are configured.
o Changed configuration page accessors to allow threads to sleep
rather than busy wait for completion.
o Removed hard coded data transfer sizes from configuration page
routines so that RAID configuration page processing is possible.
mpt_reg.h:
o Move controller register definitions into a separate file.
mpt.h:
o Re-arrange includes to allow inlined functions to be
defined in mpt.h.
o Add reply, event, and reset handler definitions.
o Add softc fields for handling timeout and controller
reset recovery.
mpt_cam.c:
o Move mpt_freebsd.c to mpt_cam.c. Move all core functionality,
such as event handling, into mpt.c leaving only CAM SCSI
support here.
o Revamp completion handler to provide correct CAM status for
all currently defined SCSI MPI message result codes.
o Register event and reset handlers with the MPT core. Modify
the event handler to notify CAM of bus reset events. The
controller reset handler will abort any transactions that
have timed out. All other pending CAM transactions are
correctly aborted by the core driver's reset handler.
o Allocate a single request up front to perform task management
operations. This guarantees that we can always perform a
TMF operation even when the controller is saturated with other
operations. The single request also serves as a perfect
mechanism of guaranteeing that only a single TMF is in flight
at a time - something that is required according to the MPT
Fusion documentation.
o Add a helper function for issuing task management requests
to the controller. This is used to abort individual requests
or perform a bus reset.
o Modify the CAM XPT_BUS_RESET ccb handler to wait for and
properly handle the status of the bus reset task management
frame used to reset the bus. The previous code assumed that
the reset request would always succeed.
o Add timeout recovery support. When a timeout occurs, the
timed-out request is added to a queue to be processed by
our recovery thread and the thread is woken up. The recovery
thread processes timed-out command serially, attempting first
to abort them and then falling back to a bus reset if an
abort fails.
o Add calls to mpt_reset() to reset the controller if any
handshake command, bus reset attempt or abort attempt
fails due to a timeout.
o Export a secondary "bus" to CAM that exposes all volume drive
members as pass-thru devices, allowing CAM to perform proper
speed negotiation to hidden devices.
o Add a CAM async event handler tracking the AC_FOUND_DEVICE event.
Use this to trigger calls to set the per-volume queue depth once
the volume is fully registered with CAM. This is required to avoid
hitting firmware limits on volume queue depth. Exceeding the
limit causes the firmware to hang.
mpt_cam.h:
o Add several helper functions for interfacing to CAM and
performing timeout recovery.
mpt_pci.c:
o Disable interrupts on the controller before registering and
enabling interrupt delivery to the OS. Otherwise we risk
receiving interrupts before the driver is ready to receive
them.
o Make use of compatibility macros that allow the driver to
be compiled under 4.x and 5.x.
mpt_raid.c:
o Add a per-controller instance RAID thread to perform settings
changes and query status (minimizes CPU busy wait loops).
o Use a shutdown handler to disable "Member Write Cache Enable"
(MWCE) setting for RAID arrays set to enable MWCE During Rebuild.
o Change reply handler function signature to allow handlers to defer
the deletion of reply frames. Use this to allow the event reply
handler to queue up events that need to be acked if no resources
are available to immediately ack an event. Queued events are
processed in mpt_free_request() where resources are freed. This
avoids a panic on resource shortage.
o Parse and print out RAID controller capabilities during driver probe.
o Define, allocate, and maintain RAID data structures for volumes,
hidden member physical disks and spare disks.
o Add dynamic sysctls for per-instance setting of the log level, array
resync rate, array member cache enable, and volume queue depth.
mpt_debug.c:
o Add mpt_lprt and mpt_lprtc for printing diagnostics conditioned on
a particular log level to aid in tracking down driver issues.
o Add mpt_decode_value() which parses the bits in an integer
value based on a parsing table (mask, value, name string, tuples).
mpilib/*:
o Update mpi library header files to latest distribution from LSI.
Submitted by: gibbs
Approved by: re
- Add a missing "ATI" in one of the device descriptions.
- In machfb_init_engine() adjust a wait_for_fifo() call to the
actual number of operations.
- As a speed optimization cache setting the foreground and back-
ground colors.
- I got the meaning of V_DISPLAY_BLANK wrong, it's blank like turn
off and not blank like turn on and clear the screen. So move
clearing the screen to machfb_clear() were it hopefully belongs.
- Properly implement V_DISPLAY_BLANK, V_DISPLAY_STAND_BY and
V_DISPLAY_SUSPEND. This makes blank_saver.ko and green_saver.ko
work. [1]
- Implement machfb_load_palette() and machfb_save_palette() and
set the V_ADP_PALETTE flag. This makes fade_saver.ko work. [2]
- Install our 16-color color map only once and with an offset of
16 as the OBP driver expects white to be at index 0 and black at
255. This fixes the inversion of the colors back at the boot
prompt after shutting down FreeBSD. This will also be handy if
we ever want to implement breaking into OFW. Unfortunately there
doesn't seem to be a better way to achieve this as e.g. bypassing
the color map isn't supported by all Mach64 chips.
- Move invalidating the cache variables to machfb_set_mode() and
set the V_ADP_MODECHANGE flag. This causes machfb_set_mode() to
be called when the X server shuts down. This hopefully will fix
the screen corruption happening occasionally when shutting down
the X server and which is present until switching to another VTY.
Inspired by: NetBSD [1]
Based on: Xorg [2]
Approved by: re (scottl)
- Let creator_bitblt() return ENODEV as it's not implemented (missed
in sys/dev/fb/creator.c rev. 1.6).
- As a speed optimization inline the creator_ras_wait() etc. helper
functions and also cache setting the font increment, font width
and plane mask. [1]
- I got the meaning of V_DISPLAY_BLANK wrong, it's blank like turn
off and not blank like turn on and clear the screen. So move
clearing the screen to creator_clear() were it hopefully belongs.
- Properly implement V_DISPLAY_BLANK, V_DISPLAY_STAND_BY and
V_DISPLAY_SUSPEND. This makes blank_saver.ko and green_saver.ko
work. [1]
- Change the order of operations in creator_fill_rect(), i.e. write
y before x and cy before cx. This fixes drawing the top part of
the border with Elite3D cards when switching from Xorg to a VTY.
- Move setting the chip configuration we use and invalidating the
cache variables to creator_set_mode() and set the V_ADP_MODECHANGE
flag. This causes creator_set_mode() to be called when the X server
shuts down which fixes the screen corruption caused most of the
time by Xorg not restoring the original configuration present at
startup.
Inspired by/based on: Xorg [1]
Approved by: re (scottl)
variant to allocating a fixed set of 5 banks that the EBus variant
is documented to have (and also has in reality). Trying to allocate
up to 8 banks is a remnant from experiments during the development
of this driver.
Discussed with: joerg, yongari
Reviewed by: yongari
Approved by: re (scottl)
- Update driver interrupt statistics correctly.
sys/sys/pmc.h, sys/dev/hwpmc/hwpmc_mod.c:
- Fix a bug affecting debug printfs.
- Move the 'stalled' flag from being in a bit in the
'pm_flags' field of a 'struct pmc' to a field of its own in the
same structure. This flag is updated from the NMI handler and
keeping it separate makes it easier to avoid races with other
parts of the code.
sys/dev/hwpmc/hwpmc_logging.c:
- Do arithmetic with 'uintptr_t' types rather that casting
to and from 'char *'.
Approved by: re (scottl)
that since I can't test it directly. The driver also lists the EM1144
as being supported, but in reality it isn't. The EM1144-T,
{XJ,CC}{3288,3336} have the SMC chips in them, but aren't conformant MFC
cards, so they need their own driver.
Also, it does little harm to list the 8020BT, so remove #if 0.
Approved by: re (scottl)
frame being sent is to be ack'd and hasn't been filtered by the h/w;
this insures we don't pass in tx descriptors that have no meaningful
state (e.g. mcast/bcast frames are not acked and so have no tx retry
counts)
Approved by: re (scottl)
Obtained from: Atheros
Move ethernet MAC address setting into pccard attachment
Fix panic from IFP2ENADDR() use prior to if_alloc
Remove OLDCARD compat support. This should work still on oldcard, however.
sn_attach now requires that the resources be activated now, so adjust.
Approved by: re (scottl)
- Allow libpmc(3) to support P4/EMT64 PMCs on the amd64 architecture
and AMD K8 PMCs on the i386. [2]
Submitted by: ps [1]
Pointy hat: myself [2]
Approved by: re (scottl)
o Indent usb ids properly
o Check the return value of if_alloc()
o Call if_free() in ural_detach()
Reviewed by: silby (mentor)
Approved by: re (scottl)
starts with an ifatm which in turns has an ifnet. Remove also a couple
of unneccessary casts that could hide such things in the future.
Approved by: re
o Grab the MAC address out of the CIS if the card has the special
3Com 0x88 tuple. Most 3Com cards don't have this tuple, but we
prefer it to the eeprom since it only appears to be present when
the eeprom doesn't have the info. So far, I've only observed this
on my 3C362 and 3C362B cards, but the NetBSD driver implies that
the 3C362C also has this tuple, and that some 3C574 cards do too (none
of mine do). ep_pccard_mac was written after looking at the NetBSD
code.
o Store the enet addr in the softc for this device, so we can use the
overridden MAC to set the station address.
o Create a routine to set the station address and use it where we need it.
o setup the cmd shitfs and such before we call ep_alloc(), and remove
setting up the cmd shift value there. It initializes to 0, and those
attachments that need to frob it do so before calling ep_alloc.
o Remove some obsolete comments
o No longer a need to export ep_get_macaddr, so make it static
o ep_alloc already grabs the EEPROM id, so we don't need to grab it again
in ep_pccard_attach.
o eliminate unit, it isn't needed, fix some printfs to be device_printf
instead.
# All my pccards except the 3C1 work now. Didn't test ISA or cbus cards
# that I have: 3C509B-TP or 3C569B-J-TPO
Tested on: 3C589B, 3C589C, 3C589D, 3C589D-TP, 3C562, 3C562B/3C563B,
3C562D/3C563D, 3CCFE574BT, 3CXEM556, 3CCSH572BT, 3C574-TX,
3CCE589EC, 3CXE589EC, 3CCFEM556, 3C1
Approved by: re (scottl)
scan the CIS for interesting tuples. 95% of what can be obtained from
the CIS is harvested by the pccard layer and presented to the user in
standard function calls. However, there are special needs at times
where the standard stuff doesn't suffice. This is for those special
cases.
CARD_SCAN_CIS(device_get_parent(dev), function, argp)
scans the CIS of the card, passing each tuple to function with
the tuple and argp as its arguments. Returning 0 continues the scan,
while returning 1 terminates the scan. The value of the last
invocation of function is returned from this function.
int (*pccard_scan_t)(struct pccard_tuple *tuple, void *argp)
function called for each tuple. Elements of the CIS tuple can be
read with pccard_tuple_read_{1,2,3,4,n}(). You are reading
the actual tuple memory each time, in case your card has
registers in the CIS.
# I suppose these things should be documented in pccard(4) or something like
# that.
# I plan on unifying cardbus CIS support in a similar way.
Approved by: re (scottl)
- pmcstat(8) gprof output mode fixes:
lib/libpmc/pmclog.{c,h}, sys/sys/pmclog.h:
+ Add a 'is_usermode' field to the PMCLOG_PCSAMPLE event
+ Add an 'entryaddr' field to the PMCLOG_PROCEXEC event,
so that pmcstat(8) can determine where the runtime loader
/libexec/ld-elf.so.1 is getting loaded.
sys/kern/kern_exec.c:
+ Use a local struct to group the entry address of the image being
exec()'ed and the process credential changed flag to the exec
handling hook inside hwpmc(4).
usr.sbin/pmcstat/*:
+ Support "-k kernelpath", "-D sampledir".
+ Implement the ELF bits of 'gmon.out' profile generation in a new
file "pmcstat_log.c". Move all log related functions to this
file.
+ Move local definitions and prototypes to "pmcstat.h"
- Other bug fixes:
+ lib/libpmc/pmclog.c: correctly handle EOF in pmclog_read().
+ sys/dev/hwpmc_mod.c: unconditionally log a PROCEXIT event to all
attached PMCs when a process exits.
+ sys/sys/pmc.h: correct a function prototype.
+ Improve usage checks in pmcstat(8).
Approved by: re (blanket hwpmc)
was written in the old fragmented mbuf chain instead of the defragmented
one. Thus, the duration field of outgoing frames was incorrect.
o Only call m_defrag() if the mbuf fragmentation threshold is greater
than what is currently supported by the driver.
Reviewed by: silby (mentor)
Approved by: re (scottl)
which command to use to read the eeprom and which devices have an MII.
Simplify code by no longer using the OLDCARD compat rouintes (I don't
know if this breaks OLDCARD on pc98 or not, but OLDCARD on pc98 days
are numbered, I hope). This also removes a number of kludges that we
had before because they are OBE. Add a convenience routine to lookup
the device to avoid many casts in many places.
Tested with: 3C589D-TP, 3CCSH572BT
Approved by: re (scottl, blanket ep)
handling of pci resources, and mapping framebuffer leading to panics on X
startup. The proper solution involves use of bus_alloc_resource without
RF_ACTIVE, but this code is being rewritten in DRM CVS currently, and disabling
for now doesn't remove any features, so take the easy route.
PR: kern/80718
Approved by: re (scottl)
Dont try to enable read/write caching on devices that doesn't support it,
this reduces the noise from ATA on flash devices and the like.
Approved by: re@ (scottl)
a DLT_NULL interface. In particular:
1) Consistently use type u_int32_t for the header of a
DLT_NULL device - it continues to represent the address
family as always.
2) In the DLT_NULL case get bpf_movein to store the u_int32_t
in a sockaddr rather than in the mbuf, to be consistent
with all the DLT types.
3) Consequently fix a bug in bpf_movein/bpfwrite which
only permitted packets up to 4 bytes less than the MTU
to be written.
4) Fix all DLT_NULL devices to have the code required to
allow writing to their bpf devices.
5) Move the code to allow writing to if_lo from if_simloop
to looutput, because it only applies to DLT_NULL devices
but was being applied to other devices that use if_simloop
possibly incorrectly.
PR: 82157
Submitted by: Matthew Luckie <mjl@luckie.org.nz>
Approved by: re (scottl)
that says why we do this (or rather, explains that it is some voodoo magic
that's poorly understood). The local buffer fixes the crash on attach.
o Rename get_e() to ep_get_e() to avoid namespace pollution.
Submitted by: mux
Approved by: re (scottl)
allowed writing to the registers by any user that can open the DRI device, and
therefore ability to initiate DMA. This came in with the merge from DRI CVS on
2005-04-15.
Approved by: re (scottl)
Obtained from: DRM CVS
a problem with one particular switch module. Create a kernel option
BGE_FAKE_AUTONEG that restores the 5.4 behavior, which should make the DNLK
switch module work. IBM/Intel blades with Intel or AD switch modules should
work without patching or kernel options with this commit.
Hardware for testing provided by several folks, including
Danny Braniss <danny@cs.huji.ac.il>, Achim Patzner <ap@bnc.net>,
and OffMyServer.
Approved by: re
Provide a backwards compatible way to have the extra macro by defining
PCCARD_API_LEVEL 5 before including pccarddevs for driver writers that
want/need to have the same driver on 5 and 6 with pccard attachments.
Approved by: re (dwhite)
not only means that it's possible (though unlikely) that we hand out
differing tags for the same bus space, it also means that the tags
we handed out are not used during bus enumeration. Both affect our
ability to compare tags. Fix the first by initializing our tags only
once. Fix the second by testing if one of the tags to compare is our
tag and the other is a busspace_isa_{io|mem} tag and declare them
equal if so.
This fixes using uart(4) as the serial console on a ds10. That is,
the low-level console worked, but we could not match the resources
to one of the UARTs found during bus enumeration, which prevented
uart(4) from becoming the console in single- or multi-user mode.
Approved by: re (kensmith)
MFC after: 2 days
Thanks to: all involved in getting a ds10 to me; directly or indirectly.
Special thanks to: Dave Knight, ISC (for not scratching my Porsche :-)
Hopefully this fixes ed(4) under qemu. I'm shocked that real hardware
is apparently working with these bugs.
Approved by: re (ifnet blanket)
Pointy hat: brooks
early. I've moved it all the way to the top rather than part way up as
the submitter did.
Submitted by: Jung-uk Kim <jkim at niksun dot com>
Reported by: submitter, le, dougb
Approved by: re (ifnet blanket)
function pointer to the vga render dispatch table and initialized it with
vga_nop. The problem is that vga_nop() is a varargs function, and the
table declares a non-varargs function pointer. On amd64 (and I think ppc),
mixing varargs and non-varargs function pointers is fatal.
Change vga_nop() and gfb_nop() from varargs to non-varargs do-nothing
functions. This stops the stack corruption that only happened on amd64.
Approved by: re (scottl)
to initialize the buffer array in ata_raid_attach() by removing the
initializer. There's no memset(?) in the kernel. Instead, assign
'\0' to the first element. The buffer array holds strings only, so
this is functionally equivalent.
Applies to: ia64
Tripped over by: tinderbox
I missed. Since I did no rearrange any softcs, casting the result of
device_get_softc() to (struct ifnet **) and derefrencing it yeilds a
pointer to the ifp. This makes at least vr(4) nics work.
files after they were repo-copied to sys/dev/atkbdc. The sources of
atkbdc(4) and its children were moved to the new location in preparation
for adding an EBus front-end to atkbdc(4) for use on sparc64; i.e. in
order to not further scatter them over the whole tree which would have
been the result of adding atkbdc_ebus.c in e.g. sys/sparc64/ebus. Another
reason for the repo-copies was that some of the sources were misfiled,
e.g. sys/isa/atkbd_isa.c wasn't ISA-specific at all but for hanging
atkbd(4) off of atkbdc(4) and was renamed to atkbd_atkbdc.c accordingly.
Most of sys/isa/psm.c, i.e. expect for its PSMC PNP part, also isn't
ISA-specific.
- Separate the parts of atkbdc_isa.c which aren't actually ISA-specific
but are shareable between different atkbdc(4) bus front-ends into
atkbdc_subr.c (repo-copied from atkbdc_isa.c). While here use
bus_generic_rl_alloc_resource() and bus_generic_rl_release_resource()
respectively in atkbdc_isa.c instead of rolling own versions.
- Add sparc64 MD bits to atkbdc(4) and atkbd(4) and an EBus front-end for
atkbdc(4). PS/2 controllers and input devices are used on a couple of
Sun OEM boards and occur on either the EBus or the ISA bus. Depending on
the board it's either the only on-board mean to connect a keyboard and
mouse or an alternative to either RS232 or USB devices.
- Wrap the PSMC PNP part of psm.c in #ifdef DEV_ISA so it can be compiled
without isa(4) (e.g. for EBus-only machines). This ISA-specific part
isn't separated into its own source file, yet, as it requires more work
than was feasible for 6.0 in order to do it in a clean way. Actually
philip@ is working on a rewrite of psm(4) so a more comprehensive
clean-up and separation of hardware dependent and independent parts is
expected to happen after 6.0.
Tested on: i386, sparc64 (AX1105, AXe and AXi boards)
Reviewed by: philip
struct ifnet or the layer 2 common structure it was embedded in have
been replaced with a struct ifnet pointer to be filled by a call to the
new function, if_alloc(). The layer 2 common structure is also allocated
via if_alloc() based on the interface type. It is hung off the new
struct ifnet member, if_l2com.
This change removes the size of these structures from the kernel ABI and
will allow us to better manage them as interfaces come and go.
Other changes of note:
- Struct arpcom is no longer referenced in normal interface code.
Instead the Ethernet address is accessed via the IFP2ENADDR() macro.
To enforce this ac_enaddr has been renamed to _ac_enaddr.
- The second argument to ether_ifattach is now always the mac address
from driver private storage rather than sometimes being ac_enaddr.
Reviewed by: sobomax, sam
- Initialize val_ec with the content of the volume EC register
for ACPI_IBM_METHOD_VOLUME and ACPI_IBM_METHOD_MUTE in acpi_ibm_sysctl_set()
if there is no CMOS handle present. This fixes setting volume and mute on
such models.
Submitted by: ru
Approved by: philip
- Restructured for easier extensibility and maintainability
- To be more uniform with the other ACPI extras drivers and to better reflect
their actual meaning, some sysctls were moved:
o brightness -> lcd_brightness
o keylight -> thinklight
o enable -> events
o misckey -> hotkey
o avail_mask -> availmask
o key_mask -> eventmask
- New "initialmask" sysctl, which holds the initial eventmask
- The "wlan" sysctl is now read-only, since writing to it didn't have
any effect
- The "version" sysctl was removed, since it seems to be the same (0x100)
on all models I have seen
- Support for more hotkeys by the "hotkey" sysctl
- Improved support of ACPI events. Disabled by default, since it unexpectedly
changes the behaviour of some keys. (on my T41p there are now 24 different
keypress events that get reported)
- write support for: volume, mute, lcd_brightness and thinklight
- led(4) interface for the thinklight [1]
- New sysctls "fan" and "fan_speed" to support reading of fan status and speed
- New sysctl "thermal" to support reading of up to 8 thermal sensors
Reviewed by: philip
Approved by: philip
Submitted by: simon [1]
Inspired by: The Linux ibm_acpi driver by Borislav Deianov
http://ibm-acpi.sourceforge.net/
The ThinkPad Button program (tpb) by Markus Braun
http://www.nongnu.org/tpb/
Thanks to: brueffer, dvl, njl, philip, simon, takawata and the many
testers from freebsd-acpi@ and freebsd-mobile@
- Implement sampling modes and logging support in hwpmc(4).
- Separate MI and MD parts of hwpmc(4) and allow sharing of
PMC implementations across different architectures.
Add support for P4 (EMT64) style PMCs to the amd64 code.
- New pmcstat(8) options: -E (exit time counts) -W (counts
every context switch), -R (print log file).
- pmc(3) API changes, improve our ability to keep ABI compatibility
in the future. Add more 'alias' names for commonly used events.
- bug fixes & documentation.
o purge ath_initkeytable; it's not needed
o add multicast key search support for supporting multiple group keys
(disabled for now; requires updated hal)
o create keycache entry for stations using open auth so they get h/w
antenna management support
o add keycache -> node mapping table; eliminates mac-based lookup in
the net80211 layer
