Commit Graph

82 Commits

Author SHA1 Message Date
Poul-Henning Kamp
83baa1a055 Add mdconfig into the build. 2000-12-28 20:59:35 +00:00
Thomas-Henning von Kamptz
3d5000784d added growfs(8) including ffsinfo(8) to the freebsd base system
Reviewed by:	 grog
2000-12-09 15:27:35 +00:00
Adrian Chadd
5332f2e5d8 Pre-IFS commit. Commit IFS-aware fsck and mount utilities.
mount_ifs: repocopy of sbin/mount, with most of the intelligence ripped out
           and "ufs" replaced with "ifs" in the right places. It will only
           mount a single filesystem, rather than the -t <type> magic that
           our real mount does.

fsck_ifs:  repocopy of sbin/fsck_ffs, but the directory structure stuff
           (pass2 and some refcount checks) has been #ifdef'ed out.

src/sbin/Makefile: Build these two utilities

There is probably cruft code left in both which can be removed at a later
date, especially in mount_ifs, but I trust that people will not try
mount_ifs -a ..

Note: there are no man pages installed for these two commands as I haven't
actually written them yet.
2000-10-14 02:44:56 +00:00
Adrian Chadd
d9f97000b4 Reviewed by: rwatson, bp
Approved by:	rwatson
Obtained from:	NetbSD source tree

Second part of the fsck wrappers commit. This commit enables the new fsck
code (removing the fsck/* code and replacing it with the netbsd fsck
wrapper code), and enabling some FFS-based utilities to compile.

Details:

* quotacheck, fsdb required modification to use the fsck_ffs/ code rather
  than fsck/ . This might change later since quotacheck requires preen.c
  which should exist in fsck/ rather than fsck_ffs/

* src/Makefile has fsck_ffs added to it so it it built as part of the tree
  now

* share/doc/smm/03.fsck/ uses the SMM.doc/ stuff from fsck_ffs, not fsck.

I've tested this, and it shouldn't require any changes on your machine.
The fsck wrapper reads /etc/fsck and is command-line-compatible enough
to not require rc changes (well, most changes unless you want to do
anything nifty by specifying the fs types explicityly, read the man page
if you want further details on what it can do.)

This now allows us to support multiple filesystem types during bootup.
2000-10-09 10:22:56 +00:00
KATO Takenori
1c206c591f Activate the pc98 directory. 2000-03-18 16:49:22 +00:00
Yoshinobu Inoue
210d0432a3 Add ip6fw.
Yes it is almost code freeze, but as the result of many thought, now I
think this should be added before 4.0...

make world check, kernel build check is done.

Reviewed by: green
Obtained from: KAME project
2000-01-29 13:54:44 +00:00
Peter Wemm
e330fda4f8 Move sbin/i386/{mount_msdos,comcontrol} back to sbin, they are not
i386 specific.

Submitted by:	bde
2000-01-14 16:37:03 +00:00
Yoshinobu Inoue
7d56d3747c Getaddrinfo(), getnameinfo(), and etc support in libc/net.
Several udp and raw apps IPv6 support.

Reviewed by: freebsd-arch, cvs-committers
Obtained from: KAME project
1999-12-28 02:37:14 +00:00
Guido van Rooij
46eae78a17 Move basic ifilter utils to sbin where they shold have been committed by
me in the first place. While we're at it: add MAINTAINER line
1999-12-06 20:50:04 +00:00
Guido van Rooij
fceb9c0ed8 rewire userland ipfilter programs 1999-11-23 21:57:29 +00:00
Boris Popov
a51e71fc64 Add mount_nwfs program. Now -current can mount NetWare volumes. 1999-10-15 09:59:48 +00:00
Peter Wemm
bd3c4bb29f Nuke the old antique copy of ipfilter from the tree. This is old enough
to be dangerous.  It will better serve us as a port building a KLD,
ala SKIP.
1999-10-10 15:08:38 +00:00
Peter Wemm
7f3dea244c $Id$ -> $FreeBSD$ 1999-08-28 00:22:10 +00:00
David E. O'Brien
ce68c9929a Move sysctl/ to src/sbin/ where it now belongs.
Repository copied by:	Peter
1999-05-10 10:17:22 +00:00
Peter Wemm
2ec18d8b24 Disconnect modload/modunload/modstat from their Makefiles.. 1999-04-18 15:56:20 +00:00
Brian Somers
2f9a9cb08c src/usr.sbin/natd -> src/sbin/natd (after a repo-copy by jdp) 1999-03-12 15:38:55 +00:00
Jordan K. Hubbard
c54f4a7556 Don't install kget on alpha - it doesn't do much useful there. 1999-02-27 10:54:06 +00:00
Jordan K. Hubbard
61645e2a13 Add kget. 1999-02-27 02:25:06 +00:00
David E. O'Brien
8d7e75d826 hook in dhclient 1999-02-10 21:09:48 +00:00
Semen Ustimenko
5287191e29 Added mount_ntfs subdirectory.
Reviewed by:	David O'Brien <obrien@NUXI.com>
1999-02-03 04:21:24 +00:00
Jordan K. Hubbard
aa6dcc6021 nuke dset - it doesn't work in a post-ELF world and abial has something
better as a replacement (kget).
1999-01-20 11:53:20 +00:00
Søren Schmidt
580d0d02e8 Reenable vinum after repository copy.
Forgotten by:	Peter.
1998-12-28 11:06:21 +00:00
Søren Schmidt
380366f204 Temporaryly disable vinum, awaiting repository copy of misplaced files. 1998-12-27 19:43:28 +00:00
Bruce Evans
cffd2ca48b Fixed disorder. 1998-11-10 11:54:29 +00:00
Dima Ruban
57e3cd686c Reenable adjkerntz for alpha. 1998-11-09 21:52:50 +00:00
Greg Lehey
3d8357b49c Include vinum in SUBDIR 1998-09-28 05:38:52 +00:00
Poul-Henning Kamp
3f8c45065e (this is an extract from src/share/examples/atm/README)
===================================
                HARP  |  Host ATM Research Platform
                ===================================

                              HARP 3

What is this stuff?
-------------------
The Advanced Networking Group (ANG) at the Minnesota Supercomputer Center,
Inc. (MSCI), as part of its work on the MAGIC Gigabit Testbed, developed
the Host ATM Research Platform (HARP) software, which allows IP hosts to
communicate over ATM networks using standard protocols.  It is intended to
be a high-quality platform for IP/ATM research.

HARP provides a way for IP hosts to connect to ATM networks.  It supports
standard methods of communication using IP over ATM.  A host's standard IP
software sends and receives datagrams via a HARP ATM interface.  HARP provides
functionality similar to (and typically replaces) vendor-provided ATM device
driver software.

HARP includes full source code, making it possible for researchers to
experiment with different approaches to running IP over ATM.  HARP is
self-contained; it requires no other licenses or commercial software packages.

HARP implements support for the IETF Classical IP model for using IP over ATM
networks, including:

   o IETF ATMARP address resolution client
   o IETF ATMARP address resolution server
   o IETF SCSP/ATMARP server
   o UNI 3.1 and 3.0 signalling protocols
   o Fore Systems's SPANS signalling protocol

What's supported
----------------
The following are supported by HARP 3:

   o ATM Host Interfaces
        - FORE Systems, Inc. SBA-200 and SBA-200E ATM SBus Adapters
        - FORE Systems, Inc. PCA-200E ATM PCI Adapters
        - Efficient Networks, Inc. ENI-155p ATM PCI Adapters

   o ATM Signalling Protocols
        - The ATM Forum UNI 3.1 signalling protocol
        - The ATM Forum UNI 3.0 signalling protocol
        - The ATM Forum ILMI address registration
        - FORE Systems's proprietary SPANS signalling protocol
        - Permanent Virtual Channels (PVCs)

   o IETF "Classical IP and ARP over ATM" model
        - RFC 1483, "Multiprotocol Encapsulation over ATM Adaptation Layer 5"
        - RFC 1577, "Classical IP and ARP over ATM"
        - RFC 1626, "Default IP MTU for use over ATM AAL5"
        - RFC 1755, "ATM Signaling Support for IP over ATM"
        - RFC 2225, "Classical IP and ARP over ATM"
        - RFC 2334, "Server Cache Synchronization Protocol (SCSP)"
        - Internet Draft draft-ietf-ion-scsp-atmarp-00.txt,
                "A Distributed ATMARP Service Using SCSP"

   o ATM Sockets interface
        - The file atm-sockets.txt contains further information

What's not supported
--------------------
The following major features of the above list are not currently supported:

        o UNI point-to-multipoint support
        o Driver support for Traffic Control/Quality of Service
        o SPANS multicast and MPP support
        o SPANS signalling using Efficient adapters

This software was developed under the sponsorship of the Defense Advanced
Research Projects Agency (DARPA).

Reviewed (lightly) by:	phk
Submitted by:	Network Computing Services, Inc.
1998-09-15 11:44:44 +00:00
Justin T. Gibbs
431b8233d7 Add camcontrol. Remove scsiformat. 1998-09-15 10:25:04 +00:00
John Birrell
b8f26023ac Change MACHINE to MACHINE_ARCH to support MACHINE=pc98. 1998-09-05 08:29:05 +00:00
John Birrell
120e8c9dfb Now that ldconfig does elf work too, build it on alpha as well. 1998-09-05 07:35:19 +00:00
Gary Palmer
cb7f1224bb Split lines into one subdir per line. 1998-08-30 20:28:50 +00:00
John Birrell
33b51c50fb Fix the machine dependent SUBDIR I removed by mistake in the last commit. 1998-08-20 20:47:49 +00:00
John Birrell
3aeb50c6e6 All but two if these build on alpha now, but most are untested.
ldconfig isn't required.
1998-08-15 13:21:41 +00:00
Robert Nordier
5a901bd884 Activate newfs_msdos. 1998-07-06 20:05:41 +00:00
Peter Wemm
aa9ba0d726 SUBDIR += ldconfig 1998-06-01 14:12:48 +00:00
John Birrell
ce27694fab Make this safe for an alpha build, leaving out just about everything
that has some sort of kernel issue associated with it.
1998-05-18 04:46:29 +00:00
Poul-Henning Kamp
707194943c Change noc-tun to nos-tun after Peter did the repository copy to cover
up the tracks of my blunder.
1998-04-12 10:44:24 +00:00
Poul-Henning Kamp
2d84ac5722 Add noc-tun to list 1998-04-11 20:03:05 +00:00
Peter Wemm
5021f7402d Initial bmake scaffolding for ipfilter userland stuff.
Obtained from: large chunks stolen from OpenBSD and NetBSD
1998-03-21 13:53:18 +00:00
John Birrell
5c931089a9 Some things only work on i386. 1998-03-13 19:41:06 +00:00
Poul-Henning Kamp
fe3915bd64 Retire dumplfs mount_lfs newlfs 1998-01-30 12:39:18 +00:00
John-Mark Gurney
23e200d5ab activate the programs that will be used to manipulate kld modules
fix a few problems with missing headers, warn called with an exit
value, and undeclared getopt vars

these programs now compile -Wall clean (and yes, I know I should use
more than just -Wall) :)
1997-10-19 11:15:45 +00:00
Joerg Wunsch
33262b2341 Enable spppcontrol. 1997-10-11 11:34:00 +00:00
Bruce Evans
9505c10438 Reactivated dumplfs and newlfs. 1997-03-24 04:57:50 +00:00
Guido van Rooij
8f89943eda Add generation number randomization. Newly created filesystems wil now
automatically have random generation numbers. The kenel way of handling those
also changed. Further it is advised to run fsirand on all your nfs exported
filesystems. the code is mostly copied from OpenBSD, with the randomization
chanegd to use /dev/urandom
Reviewed by:	Garrett
Obtained from: OpenBSD
1997-03-23 20:08:22 +00:00
Peter Wemm
01b21ff640 Reactivate fsdb 1997-03-13 12:46:17 +00:00
Peter Wemm
33aa65742b Disable two newly broken dirs:
fsdb (too intimate with old fsck, needs work)
 newlfs (doesn't build since Lite2 lfs wasn't merged into kernel)
1997-03-11 12:06:41 +00:00
Bruce Evans
4cca17ae59 Disabled dumplfs. Importing the Lite2 version was a mistake, since
many files haven't left the vendor branch and the sys/ufs/lfs hasn't
been merged.
1997-02-17 13:15:42 +00:00
Garrett Wollman
48302f28a0 Disable rdisc, enable routed in new location. 1996-09-16 17:08:23 +00:00
Andrey A. Chernov
9b273b7f01 Return make_union, s-bit removed 1996-05-19 17:24:10 +00:00