Commit Graph

14 Commits

Author SHA1 Message Date
Mark Murray
d1b06863fb Huge cleanup of random(4) code.
* GENERAL
- Update copyright.
- Make kernel options for RANDOM_YARROW and RANDOM_DUMMY. Set
  neither to ON, which means we want Fortuna
- If there is no 'device random' in the kernel, there will be NO
  random(4) device in the kernel, and the KERN_ARND sysctl will
  return nothing. With RANDOM_DUMMY there will be a random(4) that
  always blocks.
- Repair kern.arandom (KERN_ARND sysctl). The old version went
  through arc4random(9) and was a bit weird.
- Adjust arc4random stirring a bit - the existing code looks a little
  suspect.
- Fix the nasty pre- and post-read overloading by providing explictit
  functions to do these tasks.
- Redo read_random(9) so as to duplicate random(4)'s read internals.
  This makes it a first-class citizen rather than a hack.
- Move stuff out of locked regions when it does not need to be
  there.
- Trim RANDOM_DEBUG printfs. Some are excess to requirement, some
  behind boot verbose.
- Use SYSINIT to sequence the startup.
- Fix init/deinit sysctl stuff.
- Make relevant sysctls also tunables.
- Add different harvesting "styles" to allow for different requirements
  (direct, queue, fast).
- Add harvesting of FFS atime events. This needs to be checked for
  weighing down the FS code.
- Add harvesting of slab allocator events. This needs to be checked for
  weighing down the allocator code.
- Fix the random(9) manpage.
- Loadable modules are not present for now. These will be re-engineered
  when the dust settles.
- Use macros for locks.
- Fix comments.

* src/share/man/...
- Update the man pages.

* src/etc/...
- The startup/shutdown work is done in D2924.

* src/UPDATING
- Add UPDATING announcement.

* src/sys/dev/random/build.sh
- Add copyright.
- Add libz for unit tests.

* src/sys/dev/random/dummy.c
- Remove; no longer needed. Functionality incorporated into randomdev.*.

* live_entropy_sources.c live_entropy_sources.h
- Remove; content moved.
- move content to randomdev.[ch] and optimise.

* src/sys/dev/random/random_adaptors.c src/sys/dev/random/random_adaptors.h
- Remove; plugability is no longer used. Compile-time algorithm
  selection is the way to go.

* src/sys/dev/random/random_harvestq.c src/sys/dev/random/random_harvestq.h
- Add early (re)boot-time randomness caching.

* src/sys/dev/random/randomdev_soft.c src/sys/dev/random/randomdev_soft.h
- Remove; no longer needed.

* src/sys/dev/random/uint128.h
- Provide a fake uint128_t; if a real one ever arrived, we can use
  that instead. All that is needed here is N=0, N++, N==0, and some
  localised trickery is used to manufacture a 128-bit 0ULLL.

* src/sys/dev/random/unit_test.c src/sys/dev/random/unit_test.h
- Improve unit tests; previously the testing human needed clairvoyance;
  now the test will do a basic check of compressibility. Clairvoyant
  talent is still a good idea.
- This is still a long way off a proper unit test.

* src/sys/dev/random/fortuna.c src/sys/dev/random/fortuna.h
- Improve messy union to just uint128_t.
- Remove unneeded 'static struct fortuna_start_cache'.
- Tighten up up arithmetic.
- Provide a method to allow eternal junk to be introduced; harden
  it against blatant by compress/hashing.
- Assert that locks are held correctly.
- Fix the nasty pre- and post-read overloading by providing explictit
  functions to do these tasks.
- Turn into self-sufficient module (no longer requires randomdev_soft.[ch])

* src/sys/dev/random/yarrow.c src/sys/dev/random/yarrow.h
- Improve messy union to just uint128_t.
- Remove unneeded 'staic struct start_cache'.
- Tighten up up arithmetic.
- Provide a method to allow eternal junk to be introduced; harden
  it against blatant by compress/hashing.
- Assert that locks are held correctly.
- Fix the nasty pre- and post-read overloading by providing explictit
  functions to do these tasks.
- Turn into self-sufficient module (no longer requires randomdev_soft.[ch])
- Fix some magic numbers elsewhere used as FAST and SLOW.

Differential Revision: https://reviews.freebsd.org/D2025
Reviewed by: vsevolod,delphij,rwatson,trasz,jmg
Approved by: so (delphij)
2015-06-30 17:00:45 +00:00
John-Mark Gurney
08fca7a56b Add some new modes to OpenCrypto. These modes are AES-ICM (can be used
for counter mode), and AES-GCM.  Both of these modes have been added to
the aesni module.

Included is a set of tests to validate that the software and aesni
module calculate the correct values.  These use the NIST KAT test
vectors.  To run the test, you will need to install a soon to be
committed port, nist-kat that will install the vectors.  Using a port
is necessary as the test vectors are around 25MB.

All the man pages were updated.  I have added a new man page, crypto.7,
which includes a description of how to use each mode.  All the new modes
and some other AES modes are present.  It would be good for someone
else to go through and document the other modes.

A new ioctl was added to support AEAD modes which AES-GCM is one of them.
Without this ioctl, it is not possible to test AEAD modes from userland.

Add a timing safe bcmp for use to compare MACs.  Previously we were using
bcmp which could leak timing info and result in the ability to forge
messages.

Add a minor optimization to the aesni module so that single segment
mbufs don't get copied and instead are updated in place.  The aesni
module needs to be updated to support blocked IO so segmented mbufs
don't have to be copied.

We require that the IV be specified for all calls for both GCM and ICM.
This is to ensure proper use of these functions.

Obtained from:	p4: //depot/projects/opencrypto
Relnotes:	yes
Sponsored by:	FreeBSD Foundation
Sponsored by:	NetGate
2014-12-12 19:56:36 +00:00
John-Mark Gurney
f225bcd157 I clearly didn't test the modules... add sha256c.c to the various
modules that included sha2.c...
2014-03-16 01:55:30 +00:00
Marcel Moolenaar
6a3645bbb9 Add siphash.c. While here, sort. 2014-03-06 00:37:16 +00:00
Alfred Perlstein
a7f7d29031 Chase down cryptodeflate.c change from r259109. 2013-12-09 02:06:52 +00:00
Attilio Rao
54366c0bd7 - For kernel compiled only with KDTRACE_HOOKS and not any lock debugging
option, unbreak the lock tracing release semantic by embedding
  calls to LOCKSTAT_PROFILE_RELEASE_LOCK() direclty in the inlined
  version of the releasing functions for mutex, rwlock and sxlock.
  Failing to do so skips the lockstat_probe_func invokation for
  unlocking.
- As part of the LOCKSTAT support is inlined in mutex operation, for
  kernel compiled without lock debugging options, potentially every
  consumer must be compiled including opt_kdtrace.h.
  Fix this by moving KDTRACE_HOOKS into opt_global.h and remove the
  dependency by opt_kdtrace.h for all files, as now only KDTRACE_FRAMES
  is linked there and it is only used as a compile-time stub [0].

[0] immediately shows some new bug as DTRACE-derived support for debug
in sfxge is broken and it was never really tested.  As it was not
including correctly opt_kdtrace.h before it was never enabled so it
was kept broken for a while.  Fix this by using a protection stub,
leaving sfxge driver authors the responsibility for fixing it
appropriately [1].

Sponsored by:	EMC / Isilon storage division
Discussed with:	rstone
[0] Reported by:	rstone
[1] Discussed with:	philip
2013-11-25 07:38:45 +00:00
Ivan Voras
89f81c9646 List low-level Blowfish ECB module in the SRCS. It looks like it was dropped
by accident (and it would be inconvenient to implement it otherwise because it
uses internal non-published headers).

MFC after:	1 week
2010-09-12 16:28:26 +00:00
Bjoern A. Zeeb
ca5f8016e3 After adding an SDT provider for opencrypto in r199884 we should also
depend on opt_kdtrace.h for the module build.

Submitted by:	(Andre.Albsmeier siemens.com)
MFC after:	3 days
2010-01-07 12:58:03 +00:00
George V. Neville-Neil
559d3390d0 Integrate the Camellia Block Cipher. For more information see RFC 4132
and its bibliography.

Submitted by:   Tomoyuki Okazaki <okazaki at kick dot gr dot jp>
MFC after:      1 month
2007-05-09 19:37:02 +00:00
Sam Leffler
63f0abbf1b catchup w/ crypto changes 2007-03-21 14:39:39 +00:00
Wojciech A. Koszek
51b4ccb464 This patch fixes a problem, which exists if you have IPSEC in your kernel
and want to have crypto support loaded as KLD. By moving zlib to separate
module and adding MODULE_DEPEND directives, it is possible to use such
configuration without complication. Otherwise, since IPSEC is linked with
zlib (just like crypto.ko) you'll get following error:

	interface zlib.1 already present in the KLD 'kernel'!

Approved by:	cognet (mentor)
2006-02-27 16:56:22 +00:00
Hajimu UMEMOTO
df3c03a773 just use crypto/rijndael, and nuke opencrypto/rindael.[ch].
the two became almost identical since latest KAME merge.

Discussed with:	sam
2005-03-11 17:24:46 +00:00
Bruce M Simpson
37621fd5d9 Push m_apply() and m_getptr() up into the colleciton of standard mbuf
routines, and purge them from opencrypto.

Reviewed by:	sam
Obtained from:	NetBSD
Sponsored by:	spc.org
2003-12-15 21:49:41 +00:00
Mark Murray
f544a52873 Module-ize the 'core' crypto stuff. This may still need to be compiled
into the kernel by default (if required), but other modules can now
depend() on this.

Fix inter-module dependancy.

Earlier version OK'ed by:	sam
2002-10-16 14:31:34 +00:00