The second set of USB transfer is requested by hkbd(4) and
should improve HID keyboard handling in kdb and panic contexts.
MFC after: 1 week
Reviewed by: hselasky
Differential revision: https://reviews.freebsd.org/D30486
Which happens when USB transfer setup is failed.
MFC after: 1 week
PR: 254974
Reviewed by: hselasky
Differential revision: https://reviews.freebsd.org/D30485
This fixes inability to start USB xfers in a case when FIFO has been
already open()-ed but no read() or poll() calls has been issued yet.
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D30343
This fixes lose of evdev events after moused has been killed.
While here use bitwise operations for UMS_EVDEV_OPENED flag.
Reviewed by: hselasky
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D30342
Ignore fantom keyboard state reports entirelly rather than ignore
RollOver states for each key separatelly. Latter results in spurious
release/push pairs of events on each fantom keyboard state report.
Reported by: Jan Martin Mikkelsen <janm_AT_transactionware_DOT_com>
Submitted by: Jan Martin Mikkelsen (initial version)
PR: 253249
MFC after: 1 week
This adds a new sysctl to Wellspring Touchpad driver for controlling
Z-Axis (2-finger vertical scroll) direction "hw.usb.wsp.z_invert".
Submitted by: James Wright <james.wright_AT_digital-chaos_DOT_com>
Reviewed by: wulf
PR: 253321
Differential revision: https://reviews.freebsd.org/D28521
usbhid(4) is disabled by default to avoid conflicts with existing USB HID
drivers. To enable it place following lines to /boot/loader.conf:
hw.usb.usbhid.enable=1
usbhid_load="YES"
Suggested by: jhb
Reviewed by: hselasky
Differential revision: https://reviews.freebsd.org/D28124
which installs /dev/uhid# alias to hidraw character device for
compatibility with some existing uhid(4) users like Firefox.
As side effect it renames traditional uhid(4) driver to hidraw
to make possible using of common unit number allocator.
Requested by: Greg V <greg_unrelenting.technology>
Reviewed by: hselasky (as part of D27992)
This change implements hid_if.m methods for HID-over-USB protocol [1].
Also, this change adds USBHID_ENABLED kernel option which changes
device_probe() priority and adds/removes PnP records to prefer usbhid
over ums, ukbd, wmt and other USB HID device drivers and vice-versa.
The module is based on uhid(4) driver. It is disabled by default for
now due to conflicts with existing USB HID drivers.
[1] https://www.usb.org/sites/default/files/hid1_11.pdf
Reviewed by: hselasky
Differential revision: https://reviews.freebsd.org/D27893
Also hide shim code added in a previous commit under COMPAT_USBHID12.
Note: it is enough to add -DCOMPAT_USBHID12 to CFLAGS to compile old
code with new HID subsystem, but it is not enough to link it at runtime.
HID dependency has to be added explicitly with MODULE_DEPEND macro.
Reviewed by: manu, hselasky (as part of D27887)
It will be used by the upcoming HID-over-i2C implementation. Should be
no-op, except hid.ko module dependency is to be added to affected drivers.
Reviewed by: hselasky, manu
Differential revision: https://reviews.freebsd.org/D27867
If LED state is set through evdev interface, than asynchronous nature
of USB transfer callback can lead to change of order of events echoed
back to userland as it causes LED events to be echoed with some lag.
Fix that with echoing of LED events synchronously in ioctl handler.
Reviewed by: hselasky
Obtained from: sysutils/iichid
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D27750
Unlike AT keyboards, HID devices are able to send all pc105 key
states within a single report. Let evdev to transmit all key state
changes within a single report too.
Reviewed by: hselasky
Obtained from: sysutils/iichid
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D27749
Hardware timestamp reporting is disabled by default as it produces many
extra events which are not handled by consumers like libinput.
Add hw.usb.wmt.timestamps=1 tunable to loader.conf to enable it.
Obtained from: sysutils/iichid
In Hybrid mode, the number of contacts that can be reported in one
report is less than the maximum number of contacts that the device
supports. For example, a device that supports a maximum of 4
concurrent physical contacts, can set up its top-level collection to
deliver a maximum of two contacts in one report. If four contact
points are present, the device can break these up into two serial
reports that deliver two contacts each.
Obtained from: sysutils/iichid
Handle the fact that parts of usb(4) can be compiled into the boot
loader, where M_WAITOK does not guarantee a successful allocation.
PR: 240545
Submitted by: Andrew Reiter <arr@watson.org> (original version)
Reviewed by: hselasky
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D25706
key is pressed at the same time as a regular key, that means key with
modifier is output. Some automated USB keyboards like Yubikeys need this.
This fixes a regression issue after r357861.
Reported by: Adam McDougall <mcdouga9@egr.msu.edu>
PR: 224592
PR: 233884
MFC after: 3 days
Sponsored by: Mellanox Technologies
Skip device mode switch step on Fountain-based devices as they don't
support RAW_SENSOR_MODE command, so failing to attach.
This was reproduced on PowerBook G4 (model PowerBook5,6) equipped with
product ID 0x020e
Reviewed by: hselasky
Approved by: jhibbits (mentor)
Differential Revision: https://reviews.freebsd.org/D24005
maximal input report size instead of wMaxPacketSize.
If the USB frame length is set to 1024 bytes, WMT_BSIZE, the EETI controller
will pack multiple touch events in the packet and the current code will only
process the first touch event.
As a result some important events are lost like releasing the finger from the
touchscreen.
Use the maximal input report size as buffer size instead.
PR: 244718
Tested by: Oskar Holmlund <oskar.holmlund@ohdata.se>, wulf
MFC after: 3 days
Discussed with: hselasky
Limiting frame size to maximum packet size breaks devices which have input
report size larger than wMaxPacketSize. Maximal input report size should be
used instead.
Revert the commit as it have not been MFC-ed yet.
Discussed with: hselasky
will pack multiple touch events in the packet and the current code will only
process the first touch event.
As a result some important events are lost like releasing the finger from the
touchscreen.
Use the maximum maximum packet size as buffer size instead.
Submitted by: Oskar Holmlund <oskar.holmlund@ohdata.se>
PR: 244718
MFC after: 3 days
Sponsored by: Mellanox Technologies
Touch Digitizer V04 report descriptor declares 'Contact Count Maximum' usage
as constant. That was not supported by descriptor parser.
PR: 232040
Reported by: Sergei Akhmatdinov <sakhmatd@darkn.space>
MFC after: 1 week
This fixes a regression issue after r357861.
Reported by: James Wright <james.wright@jigsawdezign.com>
PR: 224592
PR: 233884
MFC after: 3 days
Sponsored by: Mellanox Technologies
key-codes from the USB keyboard. Negative key-codes are currently skipped.
While at it use the bit size value provided by the HID location structure
instead of assuming a value of 8.
This fixes a regression issue after r357861.
Reported by: Minoru TANABE <kotanabe3@gmail.com>
PR: 224592
PR: 233884
MFC after: 3 days
Sponsored by: Mellanox Technologies
r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marked). Use it in
preparation for a general review of all nodes.
This is non-functional change that adds annotations to SYSCTL_NODE and
SYSCTL_PROC nodes using one of the soon-to-be-required flags.
Reviewed by: hselasky, kib
Approved by: kib (mentor)
Differential Revision: https://reviews.freebsd.org/D23632
Add support for decoding pressed keys as a bitmap. The keys in the
bitmap are described in the interface specific HID descriptor. Some
keyboards even have multiple input interfaces, only using the bitmap
method when the event array is full. That typically means when more
than seven keys are pressed simultaneously.
The internals of the USB keyboard driver have been slightly reworked
to keep track of all keys in a single bitmap having 256 bits. This
bitmap is then divided into blocks of 64-bits as an optimisation.
Simplify automatic key repeat logic, because only the last key pressed
can be repeated.
PR: 224592
PR: 233884
Tested by: Alex V. Petrov <alexvpetrov@gmail.com>
MFC after: 1 week
Sponsored by: Mellanox Technologies
r356087 made it rather innocuous to double-register built-in keyboard
drivers; we now set a flag to indicate that it's been registered and only
act once on a registration anyways. There is no misleading here, as the
follow-up kbd_delete_driver will actually remove the driver as needed now
that the linker set isn't also consulted after kbdinit.
Keyboard drivers are generally registered via linker set. In these cases,
they're also available as kmods which use KPI for registering/unregistering
keyboard drivers outside of the linker set.
For built-in modules, we still fire off MOD_LOAD and maybe even MOD_UNLOAD
if an error occurs, leading to registration via linker set and at MOD_LOAD
time.
This is a minor optimization at best, but it keeps the internal kbd driver
tidy as a future change will merge the linker set driver list into its
internal keyboard_drivers list via SYSINIT and simplify driver lookup by
removing the need to consult the linker set.
Most keyboard drivers are using the genkbd implementations as it is;
formally use them for any that aren't set and make
genkbd_get_fkeystr/genkbd_diag private.
These invocations were directly calling enkbd_diag(), rather than
indirection back through kbdd_diag/kbdsw. While they're functionally
equivent, invoking kbdd_diag where feasible (i.e. not in a diag
implementation) makes it easier to visually identify locking needs in these
other drivers.
Now evdev part of keyboard drivers does not take any locks if corresponding
input/eventN device node is not opened by userland consumers.
Do not assert console lock inside evdev to handle the cases when keyboard
driver is called from some special single-threaded context like shutdown
thread.
r337289 has a side effect of reducing usb frame 0 buffer size down to
touch report size. That broke some devices e.g. "Raydium Touch System"
which are capable of generating non-touch frames of bigger length.
Fix it with enlarging frame 0 buffer up to internal wmt(4) buffer size.
Reported by: Roberto Fernandez Cueto <roberfern@gmail.com>
Tested by: Roberto Fernandez Cueto <roberfern@gmail.com>
Approved by: re (gjb)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D16772
Move evdev_ev_kbd_event() helper from evdev to kbd.c as otherwise evdev
unconditionally requires all keyboard and console stuff to be compiled
into the kernel. This dependency happens as evdev_ev_kbd_event() helper
references kbdsw global variable defined in kbd.c through use of
kbdd_ioctl() macro.
While here make all keyboard drivers respect evdev_rcpt_mask while setting
typematic rate and LEDs with evdev interface.
Requested by: Milan Obuch <bsd@dino.sk>
Reviewed by: hselasky, gonzo
Differential Revision: https://reviews.freebsd.org/D16614
Now softc should be retrieved from struct edvev * pointer
with evdev_get_softc() helper.
wmt(4) is a sample of driver that support both KPI.
Reviewed by: hselasky, gonzo
Differential Revision: https://reviews.freebsd.org/D16614