Commit Graph

188 Commits

Author SHA1 Message Date
Pawel Jakub Dawidek
b8f6a34f3e Document -J in usage.
Submitted by:	Eric Anderson <anderson@freebsd.org>
2007-03-02 20:07:59 +00:00
Pawel Jakub Dawidek
868c68ed1d Add -J flag to both newfs(8) and tunefs(8) which allows to enable gjournal
support.
I left -j flag for UFS journal implementation which we may gain at some
point.

Sponsored by:	home.pl
2006-10-31 21:52:28 +00:00
Xin LI
3a6ab3de8d Explicitly say which gid do we use as a fallback, when operator
is not found.

Suggested by:	kensmith
2006-09-27 05:49:21 +00:00
Ian Dowse
9405aea2e2 Don't treat failure to find the operator GID as a fatal error; this
made it impossible to use newfs (and mdmfs) when /etc/group is
missing and /etc is read-only.
2005-08-14 17:07:04 +00:00
Xin LI
3ae329b8d2 When creating a new FFS file system, the block size will indirectly
affect the largest file size that is allowed by the file system.
On the other hand, when creating a snapshot, the snapshot file will
appear as it is as big as the file system itself.  Hence we will not
be able to create a file system on large file systems with small
block sizes.

Add a warning about this, and gives some hints to correct the issue.

Reviewed by:	mckusick
MFC After:	1 week
2005-02-20 06:33:18 +00:00
Ruslan Ermilov
d591eb90f7 Document -l and -n options in usage(). 2005-01-22 14:37:57 +00:00
Ruslan Ermilov
a1761aecf5 Polish previous revision:
- Bump document date.
- Spell "file system" properly.
- Add missing markup bits.
2005-01-22 14:36:51 +00:00
Wes Peters
34b59b6bf2 Add an option to suppress the creation of the .snap directory in
the new filesystem.  This is intended for memory and vnode filesystems
that will never be fsck'ed or dumped.

Obtained from:	St. Bernard Software RAPID
MFC after:	2 weeks
2005-01-21 22:20:25 +00:00
Pawel Jakub Dawidek
e075f345b6 Cast to intmax_t when using %jd format.
MFC after:	3 days
2005-01-08 17:19:56 +00:00
Pawel Jakub Dawidek
f4d2631187 Fix '-s' option for large disks and fix printing maximum file system size. 2004-09-19 10:01:51 +00:00
John Baldwin
b72ea57f3b Generalize the UFS bad magic value used to determine when a filesystem
has only been partly initialized via newfs(8) so that it applies to both
UFS1 and UFS2.

Submitted by:	"Xin LI" delphij at frontfree dot net
MFC:		maybe?
2004-08-19 11:09:13 +00:00
Ruslan Ermilov
d04b5dfe6c Assorted markup, grammar, and spelling fixes. 2004-05-17 08:35:43 +00:00
Mark Murray
4c723140a4 Remove advertising clause from University of California Regent's license,
per letter dated July 22, 1999.

Approved by: core, imp
2004-04-09 19:58:40 +00:00
Robert Watson
ce20d788fa Add a "-l" flag to newfs, which sets the FS_MULTILABEL flag. This
permits users of newfs to set the multilabel flag on UFS1 and UFS2
file systems from inception without using tunefs.

Obtained from:	TrustedBSD Project
Sponsored by:	DARPA, McAfee Research
2004-02-26 01:14:27 +00:00
Wes Peters
96982f9bfd Fix whitespace error in previous commit.
Approved by:	RE@ (Robert Watson)
2003-11-27 01:19:23 +00:00
Wes Peters
f44ec7f89e Don't use UFS2_BAD_MAGIC on UFS (v1) filesystems; it is Not Ready
for Prime Time there.

Submitted by:	Xin LI <delphij@frontfree.net>
Approved by:	RE@ (John, Scott)
2003-11-23 08:29:01 +00:00
Wes Peters
0af4e34b2e Add the -E command line option to force error conditions for testing.
Sponsord by:	St. Bernard Software
2003-11-16 07:17:30 +00:00
Wes Peters
ec52df8eb9 Write the UFS2 superblock with a 'BAD' magic number at the beginning
of newfs, to signify the newfs operation has not yet completed.  Re-
write the superblock with the correct magic number once all of the
cylinder groups have been created to show the operation has finished.

Sponsored by:	St. Bernard Software
2003-11-16 07:08:27 +00:00
Kirk McKusick
524ee1107f Create a .snap directory mode 770 group operator in the root of
a new filesystem. Dump and fsck will create snapshots in this
directory rather than in the root for two reasons:

1) For terabyte-sized filesystems, the snapshot may require many
   minutes to build. Although the filesystem will not be suspended
   during most of the snapshot build, the snapshot file itself is
   locked during the entire snapshot build period. Thus, if it is
   accessed during the period that it is being built, the process
   trying to access it will block holding its containing directory
   locked. If the snapshot is in the root, the root will lock and
   the system will come to a halt until the snapshot finishes. By
   putting the snapshot in a subdirectory, it is out of the likely
   path of any process traversing through the root and hence much
   less likely to cause a lock race to the root.

2) The dump program is usually run by a non-root user running with
   operator group privilege. Such a user is typically not permitted
   to create files in the root of a filesystem. By having a directory
   in group operator with group write access available, such a user
   will be able to create a snapshot there. Having the dump program
   create its snapshot in a subdirectory below the root will benefit
   from point (1) as well.

Sponsored by:   DARPA & NAI Labs.
2003-11-04 07:34:32 +00:00
Marc Fonvieille
8b23842d38 s/disklabel/bsdlabel where needed. 2003-10-11 08:24:07 +00:00
Ceri Davies
2918f54c0a Remove an unneccessary comma. 2003-09-14 20:35:22 +00:00
Ruslan Ermilov
fe08efe680 mdoc(7): Use the new feature of the .In macro. 2003-09-08 19:57:22 +00:00
Yaroslav Tykhiy
244fca1ffa Exit with a non-zero status upon a block allocation failure.
The old way of just returning could result in a file system
extremely likely to panic the kernel.  The warning printed
wouldn't help much since tools invoking newfs(8), e.g., mdmfs(8),
couldn't detect the error.

PR:		bin/55078
MFC after:	1 week
2003-08-05 13:35:17 +00:00
Doug Barton
a32bb1b53a When newfs'ing a partition with UFS2 that had previously been newfs'ed
with UFS1, the UFS1 superblocks were not deleted. This allowed any
RELENG_4 (or other non-UFS2-aware) fsck to think it knew how to "fix"
the file system, resulting in severe data scrambling.

This patch is a more advanced version than the one originally submitted.
Lukas improved it based on feedback from Kirk, and testing by me. It
blanks all UFS1 superblocks (if any) during a UFS2 newfs, thereby causing
fsck's that are not UFS2 aware to generate the "SEARCH FOR ALTERNATE
SUPER-BLOCK FAILED" message, and exit without damaging the fs.

PR:		bin/51619
Submitted by:	Lukas Ertl <l.ertl@univie.ac.at>
Reviewed by:	kirk
Approved by:	re (scottl)
2003-05-22 18:38:54 +00:00
Ian Dowse
7bdf1805b1 Put back the error checking in wtfs() that was lost when newfs was
changed to use libufs in revision 1.71. Without this, any write
failures in newfs were silently ignored.

Note that this will display a meaningless errno string in the case
of a short write as opposed to a write error, since bwrite()'s
return value does not allow the caller to determine if errno is
valid.

Reported by:	Lukas Ertl <l.ertl@univie.ac.at>
Reviewed by:	jmallett
Approved by:	re (bmah)
2003-05-10 18:58:17 +00:00
David E. O'Brien
c69284ca08 Use __FBSDID() to quiet GCC 3.3 warnings. 2003-05-03 18:41:59 +00:00
Christian Brueffer
d4cb71fc53 Remove reference to diskpart(8)
PR:		51193
Submitted by:	Yonatan@xpert.com
2003-04-20 19:16:21 +00:00
Robert Watson
b459937e0c Throw the switch--change to UFS2 as our default file system format for
FreeBSD 5.1-RELEASE and later:

- newfs(8) will now create UFS2 file systems unless UFS1 is specifically
  requested (-O1).  To do this, I just twiddled the Oflag default.

- sysinstall(8) will now select UFS2 as the default layout for new
  file systems unless specifically requested (use '1' and '2' to change
  the file system layout in the disk labeler).  To do this, I inverted
  the ufs2 flag into a ufs1 flag, since ufs2 is now the default and
  ufs1 is the edge case.  There's a slight semantic change in the
  key behavior: '2' no longer toggles, it changes the selection to UFS2.

This is very similar to a patch David O'Brien sent me at one point, and
that I couldn't find.

Approved by:	re (telecon)
Reviewed by:	mckusick, phk, bmah
2003-04-20 14:08:05 +00:00
Ruslan Ermilov
522ccf3f35 mdoc(7) police: markup laundry. 2003-02-23 01:47:49 +00:00
Kirk McKusick
e27c9f46ad Fix the -R flag so that it provides sequential "random" numbers
so that the regression test will succeed.

Sponsored by:   DARPA & NAI Labs.
2003-02-22 23:26:11 +00:00
John W. De Boskey
66227a4409 Our first keyword hit for apropos ufs2. 2003-02-19 02:41:29 +00:00
Kirk McKusick
aca3e4974f Replace use of random() with arc4random() to provide less guessable
values for the initial inode generation numbers in newfs and for
newly allocated inode generation numbers in the kernel.

Submitted by:	Theo de Raadt <deraadt@cvs.openbsd.org>
Sponsored by:   DARPA & NAI Labs.
2003-02-14 21:31:58 +00:00
Kirk McKusick
363c185255 Correct lines incorrectly added to the copyright message. Add missing period.
Submitted by:	Bruce Evans <bde@zeta.org.au>
Sponsored by:   DARPA & NAI Labs.
2003-02-14 21:08:14 +00:00
Juli Mallett
fc903aa525 Convert newfs to libufs (really). Solves one real issue with previous
version of such.  Differences in filesystems generated were found to be
from 1) sbwrite with the "all" parameter 2) removal of writecache.  The
sbwrite call was made to perform as the original version, and otherwise
this was checked against a version of newfs with the write cache removed.
2003-02-11 03:06:45 +00:00
Gordon Tetlow
c715b047bc Bring in support for volume labels to the filesystem utilities.
Reviewed by:	mckusick
2003-02-01 04:17:10 +00:00
Juli Mallett
5a29754e3f Back out conversion to libufs, for now. It seems to cause problems.
Reported by: phk
2003-01-29 22:52:27 +00:00
Juli Mallett
9d492cddac Convert newfs to use libufs. I've tested this on md filesystems, as has
keramida, and all seems well.
2003-01-27 07:24:32 +00:00
Kirk McKusick
33493b1820 Correctly calculate the initial number of fragments in a filesystem
so that fsck does not complain with `SUMMARY BLK COUNT(S) WRONG IN
SUPERBLK' the first time it is run on a new filesystem.

Reported by:	Poul-Henning Kamp <phk@freebsd.org>
Sponsored by:   DARPA & NAI Labs.
2002-12-02 19:31:53 +00:00
Kirk McKusick
41e20344a2 Add some more checks to newfs so that it will not build filesystems
that the kernel will refuse to mount. Specifically it now enforces
the MAXBSIZE blocksize limit. This update also fixes a problem where
newfs could segment fault if the selected fragment size was too large.

PR:		bin/30959
Submitted by:	Ceri Davies <setantae@submonkey.net>
Sponsored by:   DARPA & NAI Labs.
2002-11-30 18:28:26 +00:00
Kirk McKusick
ada981b228 Create a new 32-bit fs_flags word in the superblock. Add code to move
the old 8-bit fs_old_flags to the new location the first time that the
filesystem is mounted by a new kernel. One of the unused flags in
fs_old_flags is used to indicate that the flags have been moved.
Leave the fs_old_flags word intact so that it will work properly if
used on an old kernel.

Change the fs_sblockloc superblock location field to be in units
of bytes instead of in units of filesystem fragments. The old units
did not work properly when the fragment size exceeeded the superblock
size (8192). Update old fs_sblockloc values at the same time that
the flags are moved.

Suggested by:	BOUWSMA Barry <freebsd-misuser@netscum.dyndns.dk>
Sponsored by:   DARPA & NAI Labs.
2002-11-27 02:18:58 +00:00
Kirk McKusick
59a825617f Properly calculate the initial number of fragments in a large filesystem.
Sponsored by:   DARPA & NAI Labs.
2002-11-15 23:50:14 +00:00
Kirk McKusick
ecfc865a4b Bound the size of the superblock to SBLOCKSIZE.
Submitted by:	BOUWSMA Beery <freebsd-misuser@netscum.dyndns.dk>
Sponsored by:	DARPA & NAI Labs.
2002-10-18 23:17:30 +00:00
Poul-Henning Kamp
3f8322d6b8 Remove a comma trailing an if clause.
According to Kirk: "Luckily, the statement is usually true".

Spotted by:	FlexeLint
2002-10-01 17:31:28 +00:00
Mike Barcroft
89fdc4e117 Use the standardized CHAR_BIT constant instead of NBBY in userland. 2002-09-25 04:06:37 +00:00
Poul-Henning Kamp
1851342297 Failure to rewrite the disklabel should not be fatal.
Sponsored by:	DARPA & NAI Labs.
2002-09-22 09:41:41 +00:00
Tom Rhodes
5af4935a22 Fix some 'SYNOPSIS' and 'usage' messages. 2002-08-27 00:49:27 +00:00
Tom Rhodes
ce66ddb763 s/filesystem/file system/g as discussed on -developers 2002-08-21 18:11:48 +00:00
Ruslan Ermilov
3e40554f06 mdoc(7) police: Consistently name options' arguments in the SYNOPSIS and DESCRIPTION sections.. 2002-08-13 13:13:20 +00:00
Ollivier Robert
752c7d0862 di_createtime -> di_birthtime.
Submitted by:	Udo Schweigert <Udo.Schweigert@siemens.com>
2002-07-17 10:31:38 +00:00
Bruce Evans
ffcaf36b2c Fixed 4 printf format errors that were fatal on alphas. %qd is not even
suitable for printing quad_t's since it is equivalent to %lld but quad_t
is unsigned long on alphas.  quad_t shouldn't be used anyway.
2002-07-11 17:49:41 +00:00