Commit Graph

36 Commits

Author SHA1 Message Date
Yoshihiro Takahashi
41f5bd0f6d Don't call bus_deactivate_resource() explicitly before calling
bus_release_resource().  This is needed for pc98 by upcoming nexus related
change.
2007-03-21 03:38:37 +00:00
Paolo Pisati
ef544f6312 o break newbus api: add a new argument of type driver_filter_t to
bus_setup_intr()

o add an int return code to all fast handlers

o retire INTR_FAST/IH_FAST

For more info: http://docs.freebsd.org/cgi/getmsg.cgi?fetch=465712+0+current/freebsd-current

Reviewed by: many
Approved by: re@
2007-02-23 12:19:07 +00:00
John Baldwin
57fb5e6097 - Use bus_setup_intr() and bus_teardown_intr() to register device driver
interrupt handlers rather than BUS_SETUP_INTR() and BUS_TEARDOWN_INTR().
  Uses of the BUS_*() versions in the implementation of foo_intr methods
  in bus drivers were not changed.  Mostly this just means that some
  drivers might start printing diagnostic messages like [FAST] when
  appropriate as well as honoring mpsafenet=0.
- Fix two more of the ppbus drivers' identify routines to function
  correctly in the mythical case of a machine with more than one ppbus.
2006-02-22 18:16:26 +00:00
Warner Losh
6117d67f88 If the device has a PNPID, don't bother to attach. There were some
instances where the probe that was here would falsely grab a device.
2006-02-02 23:57:31 +00:00
Marius Strobl
fcff691970 Account for ebus(4) defaulting to SYS_RES_MEMORY for memory resources
since ebus.c rev. 1.22.
2005-06-04 20:29:28 +00:00
Marius Strobl
26280d88d7 - Introduce an ofw_bus kobj-interface for retrieving the OFW node and a
subset ("compatible", "device_type", "model" and "name") of the standard
  properties in drivers for devices on Open Firmware supported busses. The
  standard properties "reg", "interrupts" und "address" are not covered by
  this interface because they are only of interest in the respective bridge
  code. There's a remaining standard property "status" which is unclear how
  to support properly but which also isn't used in FreeBSD at present.
  This ofw_bus kobj-interface allows to replace the various (ebus_get_node(),
  ofw_pci_get_node(), etc.) and partially inconsistent (central_get_type()
  vs. sbus_get_device_type(), etc.) existing IVAR ones with a common one.
  This in turn allows to simplify and remove code-duplication in drivers for
  devices that can hang off of more than one OFW supported bus.
- Convert the sparc64 Central, EBus, FHC, PCI and SBus bus drivers and the
  drivers for their children to use the ofw_bus kobj-interface. The IVAR-
  interfaces of the Central, EBus and FHC are entirely replaced by this. The
  PCI bus driver used its own kobj-interface and now also uses the ofw_bus
  one. The IVARs special to the SBus, e.g. for retrieving the burst size,
  remain.
  Beware: this causes an ABI-breakage for modules of drivers which used the
  IVAR-interfaces, i.e. esp(4), hme(4), isp(4) and uart(4), which need to be
  recompiled.
  The style-inconsistencies introduced in some of the bus drivers will be
  fixed by tmm@ in a generic clean-up of the respective drivers later (he
  requested to add the changes in the "new" style).
- Convert the powerpc MacIO bus driver and the drivers for its children to
  use the ofw_bus kobj-interface. This invloves removing the IVARs related
  to the "reg" property which were unused and a leftover from the NetBSD
  origini of the code. There's no ABI-breakage caused by this because none
  of these driver are currently built as modules.
  There are other powerpc bus drivers which can be converted to the ofw_bus
  kobj-interface, e.g. the PCI bus driver, which should be done together
  with converting powerpc to use the OFW PCI code from sparc64.
- Make the SBus and FHC front-end of zs(4) and the sparc64 eeprom(4) take
  advantage of the ofw_bus kobj-interface and simplify them a bit.

Reviewed by:	grehan, tmm
Approved by:	re (scottl)
Discussed with:	tmm
Tested with:	Sun AX1105, AXe, Ultra 2, Ultra 60; PPC cross-build on i386
2004-08-12 17:41:33 +00:00
Marius Strobl
490a46bf68 Unbreak after struct resource was hidden. Tested with EBus front-end on
Sun AXe board.
2004-08-11 21:19:31 +00:00
Stefan Farfeleder
5908d366fb Consistently use __inline instead of __inline__ as the former is an empty macro
in <sys/cdefs.h> for compilers without support for inline.
2004-07-04 16:11:03 +00:00
Marius Strobl
397f6b1e7f Add a first version of a pcf(4) front-end for the Sun i2c devices ("i2c"
is the actual name here) on EBus and which are PCF8584 (on systems having
a boot-bus controller the i2c are said to not be a PCF8584). Similar to the
SUNW,envctrl devices, onboard slaves for monitoring fans, temperatures and
such hang off of these i2c devices. But there's also stuff like EEPROMs
housing the hostid of the system and the boards usally have a connector to
add custom slave devices (on CP1500 there's actually a second PCF8584 with
its own I2C bus for these).
This driver already works fine but I'm not yet sure if access to the slave
devices on CP1400/CP1500 marked as "reserved for factory use" in the docs
should be blocked (most likely these are the voltage controllers wich aren't
meant to be controller by software and even not by the firmware). Once the
issues with polled mode are fixed in the common pcf(4) part in pcf.c, this
front-end should probably honour the poll-mode property of the i2c devices.
Tested on Ultra AXe and CP1500 (Netra t1 100).

OK'ed by:	joerg, nsouch
2004-06-10 21:56:52 +00:00
Marius Strobl
a9f012c75d - Add missing <sys/module.h>.
- Use "envctrl" as the name when registering this module rather than "pcf";
  we can't have "pcf" as the name for all pcf(4) front-ends or we would get
  conflicts.

OK'ed by:	joerg
2004-06-10 21:53:04 +00:00
Marius Strobl
cdd89aebf5 - Add missing <sys/module.h>.
- s,pcf_,pcf_isa, to better reflect the purpose of this front-end and to
  avoid conflicts.
- Don't use this front-end for attaching to EBus, declaring it as an EBus
  driver was a cut&paste accident according to joerg.

OK'ed by:	joerg, nsouch
2004-06-10 21:51:39 +00:00
Marius Strobl
f2ce1eaef9 - #define\tFOO\tBAR
- Remove two tabs from an otherwise empty line.

OK'ed by:	nsouch
2004-06-10 21:48:51 +00:00
Nicolas Souchu
4f16b8b190 Necessary modifications do get pcf working again for ISA. Tested with
my Elektor card. Note that the hints are necessary to specify the
IO base of the pcf chip. This enables to check the IO base when the
probe routine is called during ISA enumeration.

The interrupt driven code is mixed with polled mode, which is wrong
and produces supposed spurious interrupts at each access. I still have
to work on it.
2004-05-31 14:24:21 +00:00
Joerg Wunsch
e0efc557e7 Round #1 of improving pcf(4).
This splits the driver into a bus-independant backend, plus bus-specific
frontends.  The old pcf(4) (i386/ISA) frontend is now in pcf_isa.c, the
frontend in envctrl.c is for sparc64/Ebus2 (Sun device name: SUNW,envctrl
from Sun E450 machines).  More frontends are expected to appear in future.

This is not yet ready for public consumption, but it basically works.
Nicolas will bring over his ISA-specific fixes soon.

Reviewed by:	nsouch
2004-05-25 07:42:45 +00:00
Warner Losh
69ef3621a2 Remove isa compat stuff.
Only cy, bs and wd in the tree still use it.  I have a replacement for
cy that I need to test on ISA and PCI cards.  bs and wd are pc98 only
drivers that appear to no longer be necessary.  I'll be removing them
when I hear back from the pc98 people.
2004-03-14 23:03:57 +00:00
John-Mark Gurney
b9d3718a18 fix another LP64 problem. READ_IVAR takes a pointer to an uintptr_t, not
an int.
2003-06-20 07:22:54 +00:00
David E. O'Brien
006124d811 Use __FBSDID(). 2003-06-02 16:32:55 +00:00
Jens Schweikhardt
9d5abbddbf Correct typos, mostly s/ a / an / where appropriate. Some whitespace cleanup,
especially in troff files.
2003-01-01 18:49:04 +00:00
Nicolas Souchu
ea4122d2bf Fix bktr and pcf compilation with LINT 2002-03-25 21:22:35 +00:00
David E. O'Brien
6e551fb628 Update to C99, s/__FUNCTION__/__func__/,
also don't use ANSI string concatenation.
2001-12-10 08:09:49 +00:00
Poul-Henning Kamp
db7e3af111 Remove unneeded #include <machine/clock.h> 2000-10-15 14:19:01 +00:00
Poul-Henning Kamp
3389ae9350 Remove ~25 unneeded #include <sys/conf.h>
Remove ~60 unneeded #include <sys/malloc.h>
2000-04-19 14:58:28 +00:00
Nicolas Souchu
0f210c922b Port of ppbus standalone framework to the newbus system.
Note1: the correct interrupt level is invoked correctly for each driver.
       For this purpose, drivers request the bus before being able to
       call BUS_SETUP_INTR and BUS_TEARDOWN_INTR call is forced by the ppbus
       core when drivers release it. Thus, when BUS_SETUP_INTR is called
       at ppbus driver level, ppbus checks that the caller owns the
       bus and stores the interrupt handler cookie (in order to unregister
       it later).

       Printing is impossible while plip link is up is still TRUE.
       vpo (ZIP driver) and lpt are make in such a way that
       using the ZIP and printing concurrently is permitted is also TRUE.

Note2: specific chipset detection is not done by default. PPC_PROBE_CHIPSET
       is now needed to force chipset detection. If set, the flags 0x40
       still avoid detection at boot.

Port of the pcf(4) driver to the newbus system (was previously directly
connected to the rootbus and attached by a bogus pcf_isa_probe function).
2000-01-14 00:18:06 +00:00
Matthew N. Dodd
fe0d408987 Remove the 'ivars' arguement to device_add_child() and
device_add_child_ordered().  'ivars' may now be set using the
device_set_ivars() function.

This makes it easier for us to change how arbitrary data structures are
associated with a device_t.  Eventually we won't be modifying device_t
to add additional pointers for ivars, softc data etc.

Despite my best efforts I've probably forgotten something so let me know
if this breaks anything.  I've been running with this change for months
and its been quite involved actually isolating all the changes from
the rest of the local changes in my tree.

Reviewed by:	peter, dfr
1999-12-03 08:41:24 +00:00
Peter Wemm
3b8f07bbc3 Trim some unused #includes
Submitted by:	phk
1999-10-11 15:00:09 +00:00
Peter Wemm
c3aac50f28 $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
Matthew N. Dodd
15317dd875 Alter the behavior of sys/kern/subr_bus.c:device_print_child()
- device_print_child() either lets the BUS_PRINT_CHILD
	  method produce the entire device announcement message or
	  it prints "foo0: not found\n"

Alter sys/kern/subr_bus.c:bus_generic_print_child() to take on
the previous behavior of device_print_child() (printing the
"foo0: <FooDevice 1.1>" bit of the announce message.)

Provide bus_print_child_header() and bus_print_child_footer()
to actually print the output for bus_generic_print_child().
These functions should be used whenever possible (unless you can
just use bus_generic_print_child())

The BUS_PRINT_CHILD method now returns int instead of void.

Modify everything else that defines or uses a BUS_PRINT_CHILD
method to comply with the above changes.

	- Devices are 'on' a bus, not 'at' it.
	- If a custom BUS_PRINT_CHILD method does the same thing
	  as bus_generic_print_child(), use bus_generic_print_child()
	- Use device_get_nameunit() instead of both
	  device_get_name() and device_get_unit()
	- All BUS_PRINT_CHILD methods return the number of
	  characters output.

Reviewed by: dfr, peter
1999-07-29 01:03:04 +00:00
Doug Rabson
566643e39e Move the declaration of the interrupt type from the driver structure
to the BUS_SETUP_INTR call.
1999-05-08 21:59:43 +00:00
Peter Wemm
c41dbe5cc4 Missing 'int' in declaration of variables. 1999-05-06 18:54:19 +00:00
Peter Wemm
f79cfdd928 Operator precedence bug
PR:		11411
Submitted by:	Christopher Peterson <cpeterso@cs.washington.edu>
1999-05-02 21:51:17 +00:00
Archie Cobbs
f1d19042b0 The "easy" fixes for compiling the kernel -Wunused: remove unreferenced static
and local variables, goto labels, and functions declared but not defined.
1998-12-07 21:58:50 +00:00
Nicolas Souchu
d3cf287966 iicbus probe and attach deferred until root_bus_configure() call. 1998-11-04 22:09:17 +00:00
Peter Wemm
e6b148712b Fixup prototypes so that this beastie compiles. 1998-10-31 14:23:09 +00:00
Nicolas Souchu
af5487872e pcf.c: timeout management added
ppc.c: nsc code improved. Actually, a complete rewrite.
1998-10-31 11:37:09 +00:00
Bruce Evans
fe310de802 Initialize isa_devtab entries for interrupt handlers in individual
device drivers, not in ioconf.c.  Use a different hack in isa_device.h
so that a new config(8) is not required yet.

pc98 parts approved by: kato
1998-10-22 05:58:45 +00:00
Nicolas Souchu
4e190a62f8 Reviewed by: Doug Rabson
Submitted by:	nsouch
Philips PCF8584 chipset support. Chipset controller for the I2C bus.
1998-09-03 21:01:22 +00:00