Commit Graph

306 Commits

Author SHA1 Message Date
Sam Leffler
29d368a780 avoid possible null pointer deref when refcnt debugging is enabled; the
node may be orphaned

Submitted by:	Tai-hwa Liang
2005-01-18 20:34:22 +00:00
Sam Leffler
96acc1b61c Explicitly ignore ibss merge requests when the node is ic_bss. This can
happen on the first management frame received from a neighbor; we assume
any merge candidate will send more frames and those should be processed
with a suitable table entry.

Stepped on by:	Tai-hwa Liang
2005-01-18 20:30:16 +00:00
Sam Leffler
3fcfbbfa76 Simplify the logic for checking the scan candidates at the end of a scan.
Hold a lock on the table instead of futzing with reference counts which
was potentially dangerous except drivers were quiescent while we did this
so the table contents never changed.  Disable the hack logic for removing
scan candidates with multiple association failures; it's never done the
right thing and will be fixed correctly with background scanning goes in.
2005-01-18 20:21:29 +00:00
Sam Leffler
5784a3714a correct logic that caused beacon frames received in ibss mode to be
discarded when not scanning
2005-01-18 20:07:44 +00:00
Sam Leffler
44c72e4299 move beacon/probe response counting down to after we've decided whether or
not we're going to process the frame; this makes the counters reflect frames
actually processes instead of received (discarded frames were already counted)
2005-01-18 20:04:51 +00:00
Sam Leffler
c75ac46947 when scanning is interrupted reset state so table entries go in the station
table and not the scan table

Noticed by:	Tai-hwa Liang
2005-01-18 19:59:40 +00:00
Sam Leffler
98ff62638d do fixed rate check when considering if a scan candidate is suitable so when
it's time to join the bss we can't get an error
2005-01-18 19:52:36 +00:00
Sam Leffler
ef92bcdc97 Correct scan candidate selection logic for dual-band devices: prefer
candidate on 5Ghz channel to candidate on 2Ghz channel only when the
rssi are comparable (wasn't considering rssi).
2005-01-01 17:48:27 +00:00
Sam Leffler
db966c8b2b remove netbsd rcsid lines; they are way out of date and we appear to be
diverging too much to make tracking these files worthwhile
2004-12-31 22:44:26 +00:00
Sam Leffler
1f1d781074 bump copyright for 2005 2004-12-31 22:42:38 +00:00
Sam Leffler
2045f69945 fixup inactivity timers:
o ic_inact_auth is a bad name, it's the inactivity threshold
  for being associated but not authorized; use it that way
o reset ni_inact when switching inactivity thresholds to
  minimize the race against the timer (don't want to lock
  for this stuff)
o change the inactivity probe threshold from a one-shot to
  cover a range: when below this threshold but not expired
  send a probe each inactivity interval; should probably
  guard against the interval being turned way down as this
  could cause us to spam the net with probes
2004-12-31 22:05:13 +00:00
Sam Leffler
5e923d2ebd Relearn how WPA keying is supposed to work and fix WPA+WME while
we're at it:
o WPA/802.11i has a unicast key and a group key; in station mode
  everything is sent with the unicast key--we were consulting the
  destination mac address and incorrectly using the group key
o (perpetuate fallback use of the default tx key to maintain
  compatibility with the way wpa_supplicant works)
o correct EAPOL encryption logic to check unicast key instead
  of assuming other state implies this
o move QoS encapsulation up to before enmic work so TKIP has the
  information required to calculate the pseudo-header
o do not do QoS-encapsulation of EAPOL frames as some ap's do the
  wrong thing with such frames (may need to revisit this if ap's
  start dropping non-QoS frames from stations assoc'd with QoS)
o move ieee80211_mbuf_adjust closer to its caller
2004-12-31 21:54:53 +00:00
Sam Leffler
7076eda0b5 disable default use of wme until we can sort out interoperability issues;
users that want it can explicitly enable it
2004-12-31 21:48:15 +00:00
Sam Leffler
a95fa8d386 s/inline/__inline/ 2004-12-31 21:30:42 +00:00
Sam Leffler
736b3dc32e compare pointers against NULL 2004-12-31 21:28:41 +00:00
Sam Leffler
b8fcf54640 make ap mode sta association debug msg as informative as sta mode 2004-12-31 21:27:53 +00:00
Sam Leffler
624a1bdb63 do 11g erp station management in turboG mode too 2004-12-31 21:25:28 +00:00
Sam Leffler
3d07392995 check if the node/station table is already present before creating one; this
can happen on an ibss merge
2004-12-31 21:22:12 +00:00
Sam Leffler
3ea67c5431 include phy mode in scan debug msg 2004-12-31 21:19:59 +00:00
Sam Leffler
380c5fa9ba accept IEEE80211_KEYIX_NONE for a default tx key 2004-12-31 21:13:35 +00:00
Sam Leffler
65e278a877 don't return prematurely from processing a beacon or probe response frame
when associated; this corrects a problem where doing a scan while associated
caused the associated ap to sometimes not be included in the scan set
2004-12-31 21:11:59 +00:00
Sam Leffler
c0fa32ce0b change ieee80211_parse_wmeparams to return a unique value when the ie
is invalid so we can distinguish this from needing a parameter update;
fixes dynamic update of wme parameters
2004-12-31 21:09:43 +00:00
Sam Leffler
6b31278104 remove stray \n from debug msg 2004-12-31 21:05:05 +00:00
Sam Leffler
8116d318fc clear wep bit in 802.11 header after crypto decap so packet
capture doesn't see it
2004-12-31 21:04:05 +00:00
Sam Leffler
da615e957d o add net.wlan.X.driver_caps mib variable for setting the driver capabilities
flags for testing
o debug msg consistency fixups
2004-12-31 21:01:41 +00:00
Sam Leffler
ecca7ea2ee correct pseudo-mic header calculation for QoS frames 2004-12-31 20:59:03 +00:00
Sam Leffler
f287c95b86 whitespace/debug msg fixups 2004-12-31 20:58:06 +00:00
Sam Leffler
dfefa312d9 add ieee80211_hdrspace and ieee80211_anyhdrspace to calculate the space
for an ieee80211 header taking into account padding requirements
2004-12-31 20:56:32 +00:00
Sam Leffler
4e844c9453 correct header length calculations on tx path for QoS-encapsulated frames
when IEEE80211_F_DATAPAD is set (e.g. ath); must use ieee80211_hdrspace
instead of ieee80211_hdrsize
2004-12-31 20:51:41 +00:00
Sam Leffler
7432b7cc84 const'ify ivp reference 2004-12-31 20:44:15 +00:00
Sam Leffler
fc508e8e4f add/fixup debug msgs 2004-12-31 20:42:51 +00:00
Sam Leffler
68f5ddcd2e s/inline/__inline/ 2004-12-31 20:39:41 +00:00
Sam Leffler
8da7b74f9c expose ieee80211_phymode_name for use in debug msgs 2004-12-31 20:38:48 +00:00
Sam Leffler
1034272d55 correct module dependency 2004-12-13 18:26:13 +00:00
Sam Leffler
169b73b33a correct module dependency 2004-12-13 18:12:26 +00:00
Sam Leffler
472f08ca8f cover up the landmine until there's a proper solution 2004-12-13 04:26:36 +00:00
Sam Leffler
db4b31b04c do not clear the global key cache when reaching the INIT state 2004-12-12 05:00:13 +00:00
Sam Leffler
868a7d0eab remove module dependency on rc4; it's not needed any more 2004-12-12 00:28:41 +00:00
Sam Leffler
b8d2606bae fix wep key seting: ENETRESET is the code to return to signal the driver
should push software state to the hardware (was ERESTART which caused the
system call to be retried)

Submitted by:	Tor Egge
2004-12-10 16:35:37 +00:00
Sam Leffler
1657488232 fixup printf arguments for 64-bit machines 2004-12-08 22:34:07 +00:00
Sam Leffler
8a1b9b6ad4 Update 802.11 support; too much new functionality to fully describe
here but it includes completed 802.11g, WPA, 802.11i, 802.1x, WME/WMM,
AP-side power-save, crypto plugin framework, authenticator plugin framework,
and access control plugin frameowrk.
2004-12-08 17:26:47 +00:00
Robert Watson
af5e59bf28 Add a new network interface flag, IFF_NEEDSGIANT, which will allow
device drivers to declare that the ifp->if_start() method implemented
by the driver requires Giant in order to operate correctly.

Add a 'struct task' to 'struct ifnet' that can be used to execute a
deferred ifp->if_start() in the event that if_start needs to be called
in a Giant-free environment.  To do this, introduce if_start(), a
wrapper function for ifp->if_start().  If the interface can run MPSAFE,
it directly dispatches into the interface start routine.  If it can't
run MPSAFE, we're running with debug.mpsafenet != 0, and Giant isn't
currently held, the task is queued to execute in a swi holding Giant
via if_start_deferred().

Modify if_handoff() to use if_start() instead of direct dispatch.
Modify 802.11 to use if_start() instead of direct dispatch.

This is intended to provide increased compatibility for non-MPSAFE
network device drivers in the presence of Giant-free operation via
asynchronous dispatch.  However, this commit does not mark any network
interfaces as IFF_NEEDSGIANT.
2004-07-27 23:20:45 +00:00
Max Laier
02b199f158 Link ALTQ to the build and break with ABI for struct ifnet. Please recompile
your (network) modules as well as any userland that might make sense of
sizeof(struct ifnet).
This does not change the queueing yet. These changes will follow in a
seperate commit. Same with the driver changes, which need case by case
evaluation.

__FreeBSD_version bump will follow.

Tested-by:	(i386)LINT
2004-06-13 17:29:10 +00:00
Poul-Henning Kamp
41ee9f1c69 Add some missing <sys/module.h> includes which are masked by the
one on death-row in <sys/kernel.h>
2004-05-30 17:57:46 +00:00
Andre Oppermann
ba99a9b120 Link state change notification of ethernet media to the routing socket.
o The ieee80211_media_status() function updates the ifi_link_state field
  and calls rt_ifmsg() to notify listeners on the routing socket.

Approved by:	sam
2004-05-05 15:48:06 +00:00
Sam Leffler
fb8e945823 Resolve the issue of whether frames have FCS or not. Frame data does not
include FCS; if you want to provide it you can put it in the header.

Submitted by:	David Young
2004-04-05 22:13:21 +00:00
Sam Leffler
3055cc14c4 eliminate nested include by making MALLOC_DECLARE conditional on the
inclusion of <sys/malloc.h>

Submitted by:	bde
2004-04-05 22:10:26 +00:00
Sam Leffler
f3fc4ae54b add definitions for WME, WPA (and WPA2), and miscellaneous other stuff
that's coming soon

Obtained from:	madwifi
2004-04-05 17:47:40 +00:00
Sam Leffler
566a65385f export the malloc type M_80211_NODE for drivers that override the node
allocation routines
2004-04-05 04:17:03 +00:00
Sam Leffler
32346d607a make malloc tag for ieee80211_node more recognizable 2004-04-05 04:15:55 +00:00
Sam Leffler
36c6538b7f Change handling of probe response frames. Previously we always dropped the
refcnt on the node but left it in the node table.  This allows the node table
to hold the results of scanned ap's but for ibss scans left nodes w/o any
driver-private state setup and/or a bad refcnt (when the nodes were timed
out they were prematurely discarded).  Now we treat nodes identified for ap
scanning as before but force nodes discovered when scanning for ibss neighbors
to have complete/proper state and hold the refcnt on the node.  Any other
nodes created because of these frames are discarded directly (need to optimize
this case to eliminate various work that's immediately discarded).
2004-04-02 23:35:24 +00:00
Sam Leffler
750d6d0c60 fix adhoc/ibss operation for drivers that require host support (e.g. ath):
o remove IEEE80211_C_RCVMGT capability
o on transmit craft new nodes as needed using new ieee80211_find_txnode routine
o add ieee80211_find_txnode routine to lookup a node by mac address and
  if not present create one when operating in ibss/ahdemo mode; new nodes
  are dup'd from bss and the driver is told to treat the node as if a new
  association has been created so driver-private state (e.g. rate control
  handling) is setup

Obtained from:	netbsd (basic idea)
2004-04-02 23:25:39 +00:00
Sam Leffler
6f3f5a1170 always free node reference when processing a probe request frame; was
conditionally doing an unref if operating in adhoc mode which turns
out to be wrong
2004-04-02 23:12:45 +00:00
Sam Leffler
694dca643b o change ieee80211_dup_bss to inherit explicit data from ic_bss instead of
blindy copying the node contents; this turns out to be a bad idea as we
  add more state in the node for things like WPA
o track node allocation failures in ieee80211_dup_bss instead of the callers

Obtained from:	madwifi
2004-04-02 23:09:24 +00:00
Sam Leffler
c64bfa0f8f track node allocation failure stats in ieee80211_alloc_node instead
of each caller

Obtained from:	madwifi
2004-04-02 23:06:41 +00:00
Sam Leffler
410ca74bb8 replace explicit malloc/free with MALLOC/FREE for portability
Obtained from:	madwifi
2004-04-02 23:02:24 +00:00
Sam Leffler
b4c5a90fee extract node matching logic into new ieee80211_match_bss routine for use
in background/incremental scanning

Obtained from:	madwifi
2004-04-02 23:00:30 +00:00
Sam Leffler
849b898054 diff reduction against madwifi 2004-04-02 22:56:09 +00:00
Sam Leffler
a6381c54bb when processing beacon/probe response frames capture "is probe" in a
variable to improve code legibility since we're going to use it more
in forthcoming mods

Obtained from:	madwifi
2004-04-02 22:54:07 +00:00
Sam Leffler
4bd067c5a1 add a case of IEEE80211_ELEMID_IBSSPARMS so the statistic on unknown
elements is more meaningful (will add more with WPA merge)

Obtained from:	madwifi
2004-04-02 22:50:31 +00:00
Sam Leffler
7aa402898f when doing internal bridging free the node instead of just dropping the
reference for consistency (explicit refcounting is discouraged)

Obtained from:	madwifi
2004-04-02 22:48:52 +00:00
Sam Leffler
9089c48c13 when receiving a frame w/ a bad version number don't unref the node; the
driver is responsible for that

Obtained from:	madwifi
2004-04-02 22:47:11 +00:00
Sam Leffler
fce2da8b66 insure basic rate bit is set in derived rate set; this
works around a protocol/firmware problem with some versions found
in hermes/prism cards
2004-04-02 20:22:25 +00:00
Sam Leffler
63beab8306 diff reduction against madwifi/p4 2004-04-02 20:19:20 +00:00
Sam Leffler
2e79ca9762 o add support for controlling the power of transmitted frames
o add support for controlling the 11g protection mechanism used
  to protect OFDM frames in a mixed 11b/g network

Reviewed by:	imp
2004-03-30 22:57:57 +00:00
Sam Leffler
b2e9569143 Only call if_init when doing SIOCSIFADDR if the interface is not marked
up (IFF_UP).  This eliminates extraneous AP scanning.

Reviewed by:	imp
2004-03-30 22:53:52 +00:00
Maxime Henrion
45c7aff75a Add explicit dependency on "ether", since we use ether_ifattach(). 2004-03-16 19:25:55 +00:00
Atsushi Onoe
e249fdbedb Change WI_RID_SCAN_RES compatibility interface to return the result after
active scan is completed just as WI_RID_READ_APS.
This fixes wicontrol -L for ath(4) and awi(4) to have results even if
the driver cannot associate any APs.
2004-01-19 05:25:43 +00:00
Atsushi Onoe
4844aa7d12 Add support for FH phy, which will be used by awi driver.
Also some if_media constants to indicate operational mode are changed
to bitmasks to reduce diffs from NetBSD.
2004-01-15 08:44:27 +00:00
Sam Leffler
6f161f0342 Handle SIOCSIFMTU ioctl directly so we can apply 802.11-specific bounds.
Note that the min is actually constrained to IF_MINMTU by the if layer.
2004-01-13 06:22:55 +00:00
Sam Leffler
c6b688c403 Sync with netbsd:
o #ifdef _KERNEL the fallback definition for DLT_IEEE802_11_RADIO
o fix many comments
o rename antenna stuff and fix units/reference signal
o change IEEE80211_RADIOTAP_DBM_TX_POWER from unsigned 16-bit value
  to a signed 8-bit value
o change IEEE80211_RADIOTAP_FLAGS from 16 bits to 8 bits to simplify
  padding requirements
o drop IEEE80211_RADIOTAP_TIME
o change IEEE80211_RADIOTAP_ANTENNA from 16 bits to 8 bits
o drop IEEE80211_RADIOTAP_PAD
o add channel flag definitions for outside the kernel so radiotap
  doesn't depend on stuff in ieee80211*.h

Obtained from:	NetBSD
2003-12-28 06:57:28 +00:00
Sam Leffler
93685685f4 o insure the current channel is in a good state before starting an AP scan
o reject scan requests for a device that isn't marked up

This fixes a problem where requesting a scan before marking the device
up would cause a panic because the current channel was set to "any" (0xffff).
2003-11-13 05:23:58 +00:00
Sam Leffler
bca1062ba5 fix typo that broke AP scanning by BSSID
Submitted by:	Len Widra
2003-11-09 23:36:46 +00:00
Brian Feldman
5c8bb90bf7 Fix a reversed suser(9) in SIOCG80211:IEEE80211_IOC_WEPKEY which prevents
root from reading the wireless card's WEP keys, but allows non-root.
2003-11-05 04:16:48 +00:00
Brooks Davis
9bf40ede4a Replace the if_name and if_unit members of struct ifnet with new members
if_xname, if_dname, and if_dunit. if_xname is the name of the interface
and if_dname/unit are the driver name and instance.

This change paves the way for interface renaming and enhanced pseudo
device creation and configuration symantics.

Approved By:	re (in principle)
Reviewed By:	njl, imp
Tested On:	i386, amd64, sparc64
Obtained From:	NetBSD (if_xname)
2003-10-31 18:32:15 +00:00
Sam Leffler
59571d2ba6 fix station mode breakage (repeat after me: "test every change, no
matter how small...")
2003-10-17 23:59:11 +00:00
Sam Leffler
1be50176db add statistics for all failures and/or abnormal events; still need
to add per-node statistics
2003-10-17 23:15:30 +00:00
Sam Leffler
627200f847 fixup debug msgs 2003-10-17 22:15:26 +00:00
Sam Leffler
b83d21129e include FH/DS parameters element in probe response frames 2003-10-17 22:09:20 +00:00
Sam Leffler
8b92bf47b0 correct comment 2003-10-17 21:56:42 +00:00
Sam Leffler
7f7ecba47e o add capability to indicate if device receives all management frames
o use recv mgmt capability to decide if outbound frames should be
  discarded if no node table entry is present
2003-10-17 21:54:59 +00:00
Sam Leffler
1e343b38be parameterize locking to improve portability and possible
change to different locking strategies
2003-10-17 21:41:52 +00:00
Sam Leffler
303ebc3c87 Try yet again to deal with timing out nodes. We cannot hold the
node lock while sending a management frame as this will potentially
result in a LOR with a driver lock.  This doesn't happen for the
Atheros driver but does for the wi driver.  Use a generation number
to help process each node once when scanning the node table and
drop the node lock if we need to timeout a node and send a frame.
2003-09-26 17:00:44 +00:00
Sam Leffler
ef39d4be37 Correct rate set negotiation when operating as a station: if the
AP has basic rates that we do not support then ignore them instead
of marking the rate set in error.

This fixes an 11b station associating with an 11g/b AP.
2003-09-26 16:54:55 +00:00
Sam Leffler
37c150c4a6 allocate node table entries with a specific malloc type 2003-09-26 16:52:12 +00:00
Sam Leffler
13604e6bad correct spelling of IEEE80211_IOC_RTSTHRESHOLD 2003-09-26 16:48:39 +00:00
Sam Leffler
d1e61976a0 Generalize the per-node RSSI data so drivers can do more interesting
things than record a single value.

o add a per-node method for returning the "current RSSI" for a node
o create a default method that returns ni_rssi which is the rssi for
  the last received frame
o use the per-node "get rssi" method to return data for the RID's
  submitted by wicontrol, et. al.

Loosely based on work by Tom Marshall <tommy@home.tig-grr.com> for MADWIFI.
2003-09-15 22:28:07 +00:00
Sam Leffler
18f897abe0 Change input handling to not expect drivers to filter short frames.
In particular, let drivers send up control frames so we can dispatch
them to bpf in monitor mode.

This is the first (small) step to adding more functionality such as
power save mode.
2003-09-15 19:38:29 +00:00
Sam Leffler
993338b6ab add definitions for various control frames and a minimum-sized frame that
we use to define IEEE80211_MIN_LEN; the minimal length for frames drivers
may pass up into the 802.11 layer
2003-09-15 19:36:34 +00:00
Sam Leffler
4f2e09c4b2 Honor the short preamble capability/state flag when calculating the
capabilities for outbound management frames.  But beware of sending
this when operating on 5GHz channels; some 11a AP's reject association
requests if this bit is set in the capabilities listed.

Obtained from:	MADWIFI (with modifications)
2003-09-14 22:34:24 +00:00
Sam Leffler
fba3db9f57 short preamble capability is not just for 11g; mark IEEE80211_F_SHPREAMBLE
regardless of the operating mode

Obtained from:	MADWIFI
2003-09-14 22:32:18 +00:00
Sam Leffler
95a22a9a71 Experimental bpf capture format for 802.11 devices. The link layer
type belongs in net/bpf.h but we keep it here for the moment.

P:
Submittep by:
Obtained from:	David Young <dyoung@pobox.com>
2003-09-05 22:19:32 +00:00
Sam Leffler
7997bcbc55 o correct logic that checks frame size to decide if a cluaster is needed
o add an assertion to check the max possible packet size

Noticed by:	David Young <dyoung@pobox.com>
2003-09-01 02:55:09 +00:00
Sam Leffler
0a915fad5d MFp4 changes to fix locking issues and correct reference
count handling of station entries in hostap mode:

Input path:

o driver is now expected to find the node associated with the
  sender of a received frame; use ic_bss if none is located
o driver passes the (referenced) node into ieee80211_input for
  use within the wlan module and is responsible for cleaning up
  on return
o the antenna state is no longer passed up with each frame; this
  is now considered driver-private state and drivers are responsible
  for keeping it in the driver-private part of a node

Output path:

Revamp output path for management frames to eliminate redundant
locking that causes problems and to correct reference counting
bogosity that occurs when stations are timed out due to inactivity
(in AP mode).  On output the refcnt'd node is stashed in the pkthdr's
recvif field (yech) and retrieved by the driver.  This eliminates
an unref/ref scenario and related node table unlock/lock due to the
driver looking up the node.  This is particularly important when
stations are timed out as this causes a lock order reversal that
can result in a deadlock.  As a byproduct we also reduce the overhead
for sending management frames (minimal).  Additional fallout from
this is a change to ieee80211_encap to return a refcn't node for
tieing to the outbound frame.  Node refcnts are not reclaimed until
after a frame is completely processed (e.g. in the tx interrupt
handler).  This is especially important for timed out stations as
this deref will be the final one causing the node entry to be
reclaimed.

Additional semi-related changes:
o replace m_copym use with m_copypacket (optimization)
o add assert to verify ic_bss is never free'd during normal operation
o add comments explaining calling conventions by drivers for frames
  going in each direction
o remove extraneous code that "cannot be executed" (e.g. because
  pointers may never be null)
2003-08-19 22:17:04 +00:00
Sam Leffler
2692bb26d4 Delay creating ic_bss until after the super-class has a chance
to override the method pointers for manipulating nodes; this fixes
a problem where the ic_bss node was not being created properly
for the ath driver causing the driver to scribble on random memory.

Noticed by:	David Young <dyoung@pobox.com>
2003-08-13 22:09:44 +00:00
Sam Leffler
dd0e6ea6b0 Use IEEE80211_RATE_MAXSIZE instead of IEEE80211_RATE_SIZE to validate the
rate set element id from an AP.  This allows stations to associate with
AP's that violate the 802.11 spec by sending >8 rates.  This corrects a
recent regression; older code did likewise.
2003-08-13 21:49:35 +00:00
Sam Leffler
2bbe529d9c add monitor mode 2003-07-21 02:49:42 +00:00
Sam Leffler
a11c9a5cc2 o change ieee80211_new_state handling to use a proper method that drivers
override in their sub-class; this eliminates the hack of interpreting the
  EINPROGRESS return value to mean "don't do any of the normal work"
o correct active scanning so the first channel is only scanned once and so
  per-channel passive mode is properly honored
o expose 802.11 FSM state names so every driver doesn't keep a private copy
o eliminate node parameter to ieee80211_begin_scan; it was not being used
2003-07-20 21:36:08 +00:00
Sam Leffler
58f40303c4 insure ic_bss always has a "valid" channel; avoids problems where users could
query the state of a card and find a null channel since allocating the node
left ni_chan zero
2003-06-29 20:13:38 +00:00
Sam Leffler
b9ee58c4af use proper length to copy data for WI_RID_DESIRED_SSID (was smashing
ic_des_chan that immediately follows)
2003-06-29 20:12:17 +00:00
Sam Leffler
8be0d57010 add safeguard against (bogus) null channel parameter 2003-06-29 20:10:54 +00:00
Sam Leffler
7535e66acd revise copyright notices per discussion with Atsushi Onoe <onoe@sm.sony.co.jp> 2003-06-27 05:13:52 +00:00
Sam Leffler
c032abb595 fix typo
Submitted by:	"Norman Diamond \(ITS\)" <n_diamond@its.jp>
2003-06-27 02:53:00 +00:00
Sam Leffler
a296d8af2f add comment 2003-06-26 22:11:19 +00:00
Sam Leffler
1300bbb70e fix tcpdump -y IEEE802_11; NBPFILTER was a holdover from netbsd compatibility 2003-06-25 17:42:36 +00:00
Sam Leffler
1a1e1d2157 new 802.11 layer:
o code reorg (relative to old netbsd-derived code) for future growth
o drivers now specify available channels and rates and 802.11 layer handles
  almost all ifmedia actions
o multi-mode support for 11a/b/g devices
o 11g protocol additions (incomplete)
o new element id additions (for other than 11g)
o node/station table redone for proper locking and to eliminate driver
  incestuousness
o split device flags and capabilities to reduce confusion and provide room
  for expansion
o incomplete power management infrastructure (need to revisit)
o incomplete hooks for software retry
o more...
2003-06-23 16:55:01 +00:00