for the armv6 ABI switch. This also make WITH_LIBSOFT functional on
the arm platform. As a transition thing, this seems to work even
without switching the ABI (we basically build the same libraries
twice when MK_LIBSOFT=yes until the ABI cut over next
month). MK_LIBSOFT remains default no.
This is in preparation for LIBSOFT.
This file only supports *1* LIBCOMPAT value currently and must be capitalized.
In Makefile.libcompat given LIBCOMPAT=FOO there can be values set for
LIBFOOCFLAGS, LIBFOOCPUFLAGS, LIBFOOWMAKEENV, LIBFOOWMAKEFLAGS, LIBFOOCPUFLAGS,
and LIBFOODTRACE. These will have the standard cross-build values appended
onto them.
This could be extended to support multiple libcompat libraries in the future
once there is a need.
Reviewed by: imp
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D5612
similar Makefile.libsoft which will do the same for armv6 soft fp API
libraries in prep for pulling the trigger on moving to armv6 hard
float. Once there's two files, I'll work with bdrewery@ to merge the
two files as they are mostly the same. The high rate of churn for
Makefile* makes it quite difficult to make progress out of tree.
Differential Review: https://reviews.freebsd.org/D5566
Remove building of the legacy makewhatis(1) since it was only needed for
6.0 upgrades.
On my 2.2 GHz system libsqlite3 takes 60-100 seconds to build, which due to
its serialized nature can hold up the build waiting on it to finish in
bootstrap-tools.
makewhatis(1) was only required to be a build tool to support upgrades
from 6.0 which was properly removed in r208324 but later reverted due to
installworld using it. The installworld issue was fixed in r275622
when it was added to ITOOLS. A BOOTSTRAPPING check was missed when
makewhatis(1) was replaced with mandoc in r283777.
Sponsored by: EMC / Isilon Storage Division
When not using NO_ROOT the DESTDIR is implicitly created by the
distrib-dirs call. However with NO_ROOT it is trying to write
to the METALOG right away before running distrib-dirs which
may fail.
Sponsored by: EMC / Isilon Storage Division
After calling the cap_init(3) function Casper will fork from it's original
process, using pdfork(2). Forking from a process has a lot of advantages:
1. We have the same cwd as the original process.
2. The same uid, gid and groups.
3. The same MAC labels.
4. The same descriptor table.
5. The same routing table.
6. The same umask.
7. The same cpuset(1).
From now services are also in form of libraries.
We also removed libcapsicum at all and converts existing program using Casper
to new architecture.
Discussed with: pjd, jonathan, ed, drysdale@google.com, emaste
Partially reviewed by: drysdale@google.com, bdrewery
Approved by: pjd (mentor)
Differential Revision: https://reviews.freebsd.org/D4277
Replace `make regress` (legacy test make target) and `make test` (incomplete
test make target added with the FreeBSD test suite) with make check as it's
consistent with other open source projects.
`make check` defaults to running tests from `.OBJDIR`, but can be overridden
with the `CHECKDIR` variable.
Add `make checkworld` target to simplify running the FreeBSD test suite from
`TESTSBASE` (i.e. the top-level tests directory), similar to buildworld.
Document `make check` and `make checkworld` in build(7).
Other minor changes:
- Rename intermediate file (`Kyuafile.auto`) to `Kyuafile` to simplify
`make check`.
- Remove terse warnings attached to `beforetest`/`aftertest`.
- Add kyua binary check to check target in suite.test.mk; error out if it's
not found
The MFC is [partly] contingent on other build related changes being MFCed.
Differential Revision: https://reviews.freebsd.org/D4406
MFC after: 2 months
X-MFC to: stable/10
Relnotes: yes
Reviewed by: bdrewery, Evan Cramer <eccramer@gmail.com>
Sponsored by: EMC / Isilon Storage Division
Only 'installworld' needs to be protected and only when not using
-DNO_ROOT, which implies not installing to / and not needing the
lib dependency protections.
Sponsored by: EMC / Isilon Storage Division
r288829 states that lex requires the latest m4, but was not always building it.
Move lex to the same logic as m4 since they are closely tied now.
MFC after: 3 days
Sponsored by: EMC / Isilon Storage Division
Reported by: Slawa Olhovchenkov <slw@zxy.spb.ru>
- Rework MANIFEST generation and parsing via bsdinstall(8).
- Allow selecting debugging distribution sets during install.
- Rework bsdinstall(8) to fetch remote debug distribution sets
when they are not available on the local install medium.
- Allow selecting additional non-GENERIC kernels during install.
At present, GENERIC is still required, and installed by default.
Tested with: head@r293203
Sponsored by: The FreeBSD Foundation
Instead of using which(1) to look for doxygen, look for it in <LOCALBASE>/bin .
$PATH gets mangled by make buildenv, etc so it's better to just be explicit
about the path if someone uses that for instance.
Differential Revision: https://reviews.freebsd.org/D4406 (part of a larger diff)
Reviewed by: emaste, Evan Cramer <eccramer@gmail.com>
Sponsored by: EMC / Isilon Storage Division
It does not properly import PATH; the PATH is reset by included profile
files on startup which breaks the biggest feature of buildenv (using
sysrooted cc from WORLDTMP)
Spotted by: smh, kib
Sponsored by: EMC / Isilon Storage Division
RISC-V is a new ISA designed to support computer research and education, and
is now become a standard open architecture for industry implementations.
This is a minimal set of changes required to run 'make kernel-toolchain'
using external (GNU) toolchain.
The FreeBSD/RISC-V project home: https://wiki.freebsd.org/riscv.
Reviewed by: andrew, bdrewery, emaste, imp
Sponsored by: DARPA, AFRL
Sponsored by: HEIF5
Differential Revision: https://reviews.freebsd.org/D4445
- Don't bother looking up REVISION/BRANCH/etc from release/, or the
CPUTYPE check, as these are not used for makeman and wastes time. The also
invokes auto.obj.mk after I reverted auto.obj.mk ignoring -V in r291312.
- Don't modify CC or PATH when WITH_CCACHE_BUILD or WITH_META_MODE is enabled
as it leads to bsd.compiler.mk errors.
Sponsored by: EMC / Isilon Storage Division
This is to fix 'make all' causing it to recurse on both 'all' and 'buildconfig'
due to 'buildconfig' being in ALL_SUBDIR_TARGETS and being a dependency of
'all'.
This now adds all of the '*includes', '*files' targets as subdir targets,
allowing them to recurse.
This also removes the need for some 'realinstall' hacks in bsd.subdir.mk since
it no longer recurses; only 'install' will recurse and call the proper
'beforeinstall', 'realinstall', and 'afterinstall' in each sub-directory.
This fixes 'make includes' and 'make files' to not be a rerolled ${MAKE}
sub-shell but to rather just recurse on 'inclues' and 'files'. This avoids
various issues such as the one fixed in r289462. As such revert Makefile.inc1
back to using 'includes' which avoids an extra tree walk and parallelizes
the includes phases better.
Makefile.inc1 includes a guard so that 'make all' will not use SUBDIR_PARALLEL,
added in r289438. This is so users do not get a probably broken build if they
run 'make all' from the top-level. Before the change in this commit, the
workaround for 'make everything' was 'par-all' which would depend on 'all' and
cause a proper parallel recursion. Now that will not work so a new
_PARALLEL_SUBUDIR_OK is used to allow it.
This is still part of an effort to combine bsd.(files|incs|confs).mk and move
some of its logic out of bsd.subdir.mk, as attempted in r289282 and reverted in
r289331. This commit fixes the problems found there which was mostly double
recursing during 'includes' which would recurse on itself and 'buildincludes'
and 'installincludes', all in parallel. The logic is still in bsd.subdir.mk
for now.
I've been cautious about this commit but have experienced no breakage on the
tree except for the 'par-all' case which was already a hack. If something foo
is depending on something bar that should recurse, it is very likely that the
foo target is being recursed on already meaning that bar will still effectively
recurse once sub-directories call foo.
Discussed on: arch@
MFC after: never
Sponsored by: EMC / Isilon Storage Division
installed as "kernel". This is relevant for packaging of the kernel when
not wanting a default "kernel.txz".
Submitted by: Russell Cattelan <cattelan@thebarn.com>
MFC after: 2 weeks
Obtained from: OneFS
Sponsored by: EMC / Isilon Storage Division
Say it with me, "I will not chain commands with && in Makefiles"
This was originally fixed and explained quite well by bde@ in r36074. The
initial bmake integration caused 'set -e' to stop being used which lead to
r252419. Later 'set -e' expectations were fixed with bmake in r254980.
Because of the && here, errors would be ignored when building in parallel and
a dependency failed. Such as bootstrap-tools since it builds everything in
parallel. If any tool failed in obj/depend/all, it would just ignore the error
and continue to build. This later would result in cascaded errors that only
confused the real issue. This could also cause commands after the failed
command to still execute, leading to more confusion.
This should be fine if the command is in a sub-shell such as: (cmd1 && cmd2)
This reverts r252419.
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
- Add a kvaddr_type to represent kernel virtual addresses instead of
unsigned long.
- Add a struct kvm_nlist which is a stripped down version of struct nlist
that uses kvaddr_t for n_value.
- Add a kvm_native() routine that returns true if an open kvm descriptor
is for a native kernel and memory image.
- Add a kvm_open2() function similar to kvm_openfiles(). It drops the
unused 'swapfile' argument and adds a new function pointer argument for
a symbol resolving function. Native kernels still use _fdnlist() from
libc to resolve symbols if a resolver function is not supplied, but cross
kernels require a resolver.
- Add a kvm_nlist2() function similar to kvm_nlist() except that it uses
struct kvm_nlist instead of struct nlist.
- Add a kvm_read2() function similar to kvm_read() except that it uses
kvaddr_t instead of unsigned long for the kernel virtual address.
- Add a new kvm_arch switch of routines needed by a vmcore backend.
Each backend is responsible for implementing kvm_read2() for a given
vmcore format.
- Use libelf to read headers from ELF kernels and cores (except for
powerpc cores).
- Add internal helper routines for the common page offset hash table used
by the minidump backends.
- Port all of the existing kvm backends to implement a kvm_arch switch and
to be cross-friendly by using private constants instead of ones that
vary by platform (e.g. PAGE_SIZE). Static assertions are present when
a given backend is compiled natively to ensure the private constants
match the real ones.
- Enable all of the existing vmcore backends on all platforms. This means
that libkvm on any platform should be able to perform KVA translation
and read data from a vmcore of any platform.
Tested on: amd64, i386, sparc64 (marius)
Differential Revision: https://reviews.freebsd.org/D3341
The bootstrap-tools are supposed to be host tools, which in most cases, use
host headers and libraries. As such, directly including the src tree's headers
for libmd here causes the need to link libmd in since it will be built with
the new symbols (which /usr/lib/libmd.so) won't have unless it is new enough.
During the target build in buildworld the target headers are staged into
WORLDTMP and used via --sysroot, allowing the target xinstall to be built with
the new/target libmd.
The .PATH here was also not doing anything since xinstall does not use libmd
source files.
Sponsored by: EMC / Isilon Storage Division
MFC after: 2 weeks
