Bring several definitions required for newer ext4 features.
Rename EXT2F_COMPAT_HTREE to EXT2F_COMPAT_DIRHASHINDEX since it
is not being used yet and the new name is more compatible with
NetBSD and Linux.
This change is purely cosmetic and has no effect on the real
code.
Obtained from: NetBSD
MFC after: 3 days
When a file is first being written, the dynamic block reallocation
(implemented by ext2_reallocblks) relocates the file's blocks
so as to cluster them together into a contiguous set of blocks on
the disk.
When the cluster crosses the boundary into the first indirect block,
the first indirect block is initially allocated in a position
immediately following the last direct block. Block reallocation
would usually destroy locality by moving the indirect block out of
the way to keep the data blocks contiguous.
The issue was diagnosed long ago by Bruce Evans on ffs and surfaced
on ext2fs when block reallocaton was ported. This is only a partial
solution based on the similarities with FFS. We still require more
review of the allocation details that vary in ext2fs.
Reported by: bde
MFC after: 1 week
the vnode use count, and this might cause the kernel to panic if compiled
with WITNESS enable.
- Be sure to put the '\0' terminator to the rpath string.
Sponsored by: iXsystems inc.
useful and has the side effect of obfuscating the code a bit.
- Remove spurious references to simple_lock.
Reported by: attilio [1]
Sponsored by: iXsystems inc.
vnode and following back the chain of n_parent pointers up to the root,
without acquiring the locks of the n_parent vnodes analyzed during the
computation. This is immediately wrong because if the vnode lock is not
held there's no guarantee on the validity of the vnode pointer or the data.
In order to fix, store the whole path in the smbnode structure so that
smbfs_fullpath() can use this information.
Discussed with: kib
Reported and tested by: pho
Sponsored by: iXsystems inc.
received granular locking) but the comment present in UFS has been
copied all over other filesystems code incorrectly for several times.
Removes comments that makes no sense now.
Reviewed by: kib
MFC after: 3 days
zombie list for the pid. This allows several kern.proc sysctls to
report useful information for zombies.
Hold the allproc_lock around all searches instead of relocking it.
Remove private pfind_locked() from the new nfs client code.
Requested and reviewed by: pjd
Tested by: pho
MFC after: 3 weeks
on timing of the operations and not real lookup, bringing too many
false positives. Remove the whole mechanism. If it needs to be
implemented, next time it should really be done in the proper way.
- Fix VOP_GETATTR() in order to cope with userland bugs that would
change the type of file and not panic. Instead it gets the entry as
if it is not existing.
Reported and tested by: flo
MFC after: 2 months
X-MFC: 241519, 242536,242616
was still possible to open for write from the lower filesystem. There
is a symmetric situation where the binary could already has file
descriptors opened for write, but it can be executed from the nullfs
overlay.
Handle the issue by passing one v_writecount reference to the lower
vnode if nullfs vnode has non-zero v_writecount. Note that only one
write reference can be donated, since nullfs only keeps one use
reference on the lower vnode. Always use the lower vnode v_writecount
for the checks.
Introduce the VOP_GET_WRITECOUNT to read v_writecount, which is
currently always bypassed to the lower vnode, and VOP_ADD_WRITECOUNT
to manipulate the v_writecount value, which manages a single bypass
reference to the lower vnode. Caling the VOPs instead of directly
accessing v_writecount provide the fix described in the previous
paragraph.
Tested by: pho
MFC after: 3 weeks
- Change the code so that it relies on vfs_hash rather than on a
home-made hashtable.
- There's no need to inline fnv_32_buf().
Reviewed by: delphij
Tested by: pho
Sponsored by: iXsystems inc.
VM pressure. The reason is that in some codepaths pointers to stack
variables were passed from one thread to another.
In collaboration with: pho
Reported by: pho's stress2 suite
Sponsored by: iXsystems inc.
- Use M_ZERO flag in malloc() rather than bzero()
- malloc() with M_NOWAIT can't return NULL so there's no need to check
Reviewed by: alc
Approved by: alc
In particular, do not lock Giant conditionally when calling into the
filesystem module, remove the VFS_LOCK_GIANT() and related
macros. Stop handling buffers belonging to non-mpsafe filesystems.
The VFS_VERSION is bumped to indicate the interface change which does
not result in the interface signatures changes.
Conducted and reviewed by: attilio
Tested by: pho
processes running as root to suspend/resume execution
of the kernel nfsd threads. An earlier version of this
patch was tested by Vincent Hoffman (vince at unsane.co.uk)
and John Hickey (jh at deterlab.net).
Reviewed by: kib
MFC after: 2 weeks
This has been developed during 2 summer of code mandates and being revived
by gnn recently.
The functionality in this commit mirrors entirely content of fusefs-kmod
port, which doesn't need to be installed anymore for -CURRENT setups.
In order to get some sparse technical notes, please refer to:
http://lists.freebsd.org/pipermail/freebsd-fs/2012-March/013876.html
or to the project branch:
svn://svn.freebsd.org/base/projects/fuse/
which also contains granular history of changes happened during port
refinements. This commit does not came from the branch reintegration
itself because it seems svn is not behaving properly for this functionaly
at the moment.
Partly Sponsored by: Google, Summer of Code program 2005, 2011
Originally submitted by: ilya, Csaba Henk <csaba-ml AT creo DOT hu >
In collabouration with: pho
Tested by: flo, gnn, Gustau Perez,
Kevin Oberman <rkoberman AT gmail DOT com>
MFC after: 2 months
If you have a binary on a filesystem which is also mounted over by
nullfs, you could execute the binary from the lower filesystem, or
from the nullfs mount. When executed from lower filesystem, the lower
vnode gets VV_TEXT flag set, and the file cannot be modified while the
binary is active. But, if executed as the nullfs alias, only the
nullfs vnode gets VV_TEXT set, and you still can open the lower vnode
for write.
Add a set of VOPs for the VV_TEXT query, set and clear operations,
which are correctly bypassed to lower vnode.
Tested by: pho (previous version)
MFC after: 2 weeks
and owner_group strings that consist entirely of
digits, interpreting them as the uid/gid number.
This change was needed since new (>= 3.3) Linux
servers reply with these strings by default.
This change is mandated by the rfc3530bis draft.
Reported on freebsd-stable@ under the Subject
heading "Problem with Linux >= 3.3 as NFSv4 server"
by Norbert Aschendorff on Aug. 20, 2012.
Tested by: norbert.aschendorff at yahoo.de
Reviewed by: jhb
MFC after: 2 weeks
which is an elaborate way to cause kernel panic. Change the VOPs
implementation to return EBADF for a reclaimed vnode.
While the calls to vop_bmap should not reach deadfs, it is indeed
possible for vop_ioctl, because the VOP locking protocol is to pass
the vnode to VOP unlocked. The actual panic was observed when ioctl
was called on procfs filedescriptor which pointed to an exited
process.
Reported by: zont
Tested by: pho
MFC after: 1 week
Use it for a printf() that can be harmlessly generated for mmap()'d
files. It will be used extensively for the NFSv4.1 client.
Debugging printf()s are enabled by setting vfs.nfs.debuglevel to
a non-zero value. The higher the value, the more debugging printf()s.
Reviewed by: jhb
MFC after: 2 weeks
it. There are two problems which shall be addressed for shared
lookups use to have measurable effect on nullfs scalability:
1. When vfs_lookup() calls VOP_LOOKUP() for nullfs, which passes lookup
operation to lower fs, resulting vnode is often only shared-locked. Then
null_nodeget() cannot instantiate covering vnode for lower vnode, since
insmntque1() and null_hashins() require exclusive lock on the lower.
Change the assert that lower vnode is exclusively locked to only
require any lock. If null hash failed to find pre-existing nullfs
vnode for lower vnode and the vnode is shared-locked, the lower vnode
lock is upgraded.
2. Nullfs reclaims its vnodes on deactivation. This is due to nullfs
inability to detect reclamation of the lower vnode. Reclamation of a
nullfs vnode at deactivation time prevents a reference to the lower
vnode to become stale.
Change nullfs VOP_INACTIVE to not reclaim the vnode, instead use the
VFS_RECLAIM_LOWERVP to get notification and reclaim upper vnode
together with the reclamation of the lower vnode.
Note that nullfs reclamation procedure calls vput() on the lowervp
vnode, temporary unlocking the vnode being reclaimed. This seems to be
fine for MPSAFE filesystems, but not-MPSAFE code often put partially
initialized vnode on some globally visible list, and later can decide
that half-constructed vnode is not needed. If nullfs mount is created
above such filesystem, then other threads might catch such not
properly initialized vnode. Instead of trying to overcome this case,
e.g. by recursing the lower vnode lock in null_reclaim_lowervp(), I
decided to rely on nearby removal of the support for non-MPSAFE
filesystems.
In collaboration with: pho
MFC after: 3 weeks
1) It is not useful to call "devfs_clear_cdevpriv()" from
"d_close" callbacks, hence for example read, write, ioctl and
so on might be sleeping at the time of "d_close" being called
and then then freed private data can still be accessed.
Examples: dtrace, linux_compat, ksyms (all fixed by this patch)
2) In sys/dev/drm* there are some cases in which memory will
be freed twice, if open fails, first by code in the open
routine, secondly by the cdevpriv destructor. Move registration
of the cdevpriv to the end of the drm open routines.
3) devfs_clear_cdevpriv() is not called if the "d_open" callback
registered cdevpriv data and the "d_open" callback function
returned an error. Fix this.
Discussed with: phk
MFC after: 2 weeks
network file systems (not only NFS proper). Short reads cause pages
other then the requested one, which were not filled by read response,
to stay invalid.
Change the vm_page_readahead_finish() interface to not take the error
code, but instead to make a decision to free or to (de)activate the
page only by its validity. As result, not requested invalid pages are
freed even if the read RPC indicated success.
Noted and reviewed by: alc
MFC after: 1 week
to pull vm_param.h was removed. Other big dependency of vm_page.h on
vm_param.h are PA_LOCK* definitions, which are only needed for
in-kernel code, because modules use KBI-safe functions to lock the
pages.
Stop including vm_param.h into vm_page.h. Include vm_param.h
explicitely for the kernel code which needs it.
Suggested and reviewed by: alc
MFC after: 2 weeks
vm_page oflags by providing helper function
vm_page_readahead_finish(), which handles completed reads for pages
with indexes other then the requested one, for VOP_GETPAGES().
Reviewed by: alc
MFC after: 1 week
I found 8.3 is a history BSD version using socket to implement FIFO
pipe, it uses per-file seqcount to compare with writer generation
stored in per-pipe object. The concept is after all writers are gone,
the pipe enters next generation, all old readers have not closed the
pipe should get the indication that the pipe is disconnected, result
is they should get EPIPE, SIGPIPE or get POLLHUP in poll().
But newcomer should not know that previous writters were gone, it
should treat it as a fresh session.
I am trying to bring back FIFO pipe to history behavior. It is still
unclear that if single EOF flag can represent SBS_CANTSENDMORE and
SBS_CANTRCVMORE which socket-based version is using, but I have run
the poll regression test in tool directory, output is same as the one
on 8.3-STABLE now.
I think the output "not ok 18 FIFO state 6b: poll result 0 expected 1.
expected POLLHUP; got 0" might be bogus, because newcomer should not
know that old writers were gone. I got the same behavior on Linux.
Our implementation always return POLLIN for disconnected pipe even it
should return POLLHUP, but I think it is not wise to remove POLLIN for
compatible reason, this is our history behavior.
Regression test: /usr/src/tools/regression/poll
flag but not PIPE_WANTW, but FIFO pipe code does not understand this internal
state, when a FIFO peer reader closes the pipe, it wants to notify the writer,
it checks PIPE_WANTW, if not set, it skips calling wakeup(), so blocked writer
never noticed the case, but in general, the writer should return from the
syscall with EPIPE error code and may get SIGPIPE signal. Setting the
PIPE_WANTW fixed problem, or you can turn off direct write, it should fix the
problem too. This bug is found by PR/170203.
Another bug in FIFO pipe code is when peer closes the pipe, another end which
is being blocked in select() or poll() is not notified, it missed to call
pipeselwakeup().
Third problem is found in poll regression test, the existing code can not
pass 6b,6c,6d tests, but FreeBSD-4 works. This commit does not fix the
problem, I still need to study more to find the cause.
PR: 170203
Tested by: Garrett Copper < yanegomi at gmail dot com >
