newer ultras and probably other sun machines. This is a pretty decent
chip with 32 byte read and write fifos and support for many higher baud
rates. It supports hdlc and sdlc as well as asynchronoue serial, but the
goal here is just decent serial console support for the sparc64 port, so
these modes are not expected to be supported. So far this only has support
for the low level routines used by kernel printf and thus ddb over serial,
a character device which can be used for login consoles has not yet been
written.
doesn't support NWAY, the RealTek PHY (both the integrated ones on 8139
chips and the RTL8201L 10/100 PHY) will not report the link speed via
the ANLPAR or BMSR registers. For the 8201L, we need to look in magic
vendor-specific PHY register 0x19. For the 8139 MAC+PHY combo, we have
to be able to test the RL_MEDIASTAT register.
The changes to rlphy.c are based largely on the patch from PR 30836,
however I tried to eliminate some magic numbers by creating an entry
for the 8201 PHY in miidevs.
Also updated if_rl.c to allow the rlphy driver to read the RL_MEDIASTAT
register via the rl_miibus_readreg() routine.
revision 1.153
date: 2002/02/11 11:40:33; author: augustss; state: Exp; lines: +67 -26
Switch to the same abort mechanism as in [eo]hci; it should be more
robust.
revision 1.151
date: 2002/01/27 23:00:34; author: augustss; state: Exp; lines: +3 -3
Use M_WAITOK instead of M_NOWAIT when allocating extra descriptors.
Spotted by OpenBSD.
date: 2000/12/29 01:47:49; author: augustss;
Supply our own report descriptor (from Nick Hibma) for the Wacom Graphire.
The descriptor it reports is broken.
XXX Not tested, because I don't have the device.
date: 2001/08/15 00:06:49; author: augustss; state: Exp; lines: +3 -1
If there was a vendor+product locator match return a higher match value.
Rationale, if you have a device (e.g., a mouse) with a more specific
driver but want to recognize it with the more generic driver you can
do that by supplying vendor and product locators for the generic one.
revision 1.101
date: 2001/02/20 15:20:32; author: minoura;
Re-initialize some registers after resuming from suspend.
Some APM BIOSes do not restore them.
Reviewd by augustss.
revision 1.97
date: 2000/12/31 14:29:54; author: augustss; state: Exp; lines: +17 -3
Make the controller survive suspend/resume. Thanks to Steve Woodford
<steve@mctavish.co.uk> for testing.
revision 1.95
date: 2000/12/13 03:09:06; author: augustss; state: Exp; lines: +19 -3
Make the ohci driver not hang suspend/resume. It still doesn't resume
correctly. From itohy@netbsd.org (ITOH Yasufumi) PR kern/11714.
revision 1.58
date: 2001/11/20 23:53:26; author: augustss; state: Exp; lines: +61 -33
Create a special kernel thread to run the usb short lived tasks (instead
of using the device discovery threads).
revision 1.65
date: 2002/01/03 22:20:45; author: augustss; state: Exp; lines: +9 -2
Add a DIAGNOSTIC check. From FreeBSD.
(Just wrap these changes, that we already had, with a #ifdef DIAGNOSTIC).
revision 1.62
date: 2002/01/02 20:55:58; author: augustss; state: Exp; lines: +11 -10
Some more usb_proc_ptr changes.
Also some minor stylistic changes.
revision 1.63
date: 2002/01/02 20:58:12; author: augustss; state: Exp; lines: +4 -4
Fix typo in last commit.
revision 1.64
date: 2002/01/02 22:44:44; author: augustss; state: Exp; lines: +7 -4
Add a comment.
The usb_proc_ptr changes were introduced in 1.62 and backed out in 1.64.
revision 1.61
date: 2001/12/31 15:55:51; author: augustss; state: Exp; lines: +3 -5
Delay bus enumeration a little in case the controller is a companion
controller. This way the main controller can gain ownership of the port
before enumeration starts.
