misfeature caused troubles when a program attempted to access a shlib
where one with a higher minor number has been hashed. Ldconfig does
only include the highest-numbered shlib anyway, so this is in no way a
limitation of generality.
Caution: after installing the new programs, your /var/run/ld.so.hints
needs to be rebuiult; run ldconfig again as it's done from /etc/rc.
perl setuid scripts don't work in 2.1-current for the same reason they were
not working in 1.1.5.1.
Perl 5 has the same "problem" of course.
We have almost POSIX saved uids but we must undefine the following symbols
in order to get setuid perl scripts :
Submitted by: roberto@blaise.ibp.fr (Ollivier Robert)
This might be useful for debugging applications that use a special LDT.
However, printing of all segment registers is currently broken.
Don't print "last exception: " before the FPU opcode and pc, etc. The
opcode and pc, etc., are for the last FPU _instruction_.
Pass the saved exception status word to print_387_status() so that the
exception(s) that caused or will cause a trap can be seen. The kernel
has supported this since 1.1 or before. The kernel still clobbers the
tag word if a trap occurs.
Remove unused null function clear_regs().
cvs is not being used effectively for gdb. Our old changes get clobbered
and our new changes are mixed with "vendor" changes in the same updates
so they will be difficult to untangle for the next release of gdb. The
revision logs get spammed for each release of gdb.
the wild, slippery orgy commence!
Gary Jennejohn, too studly for his own good, has finally come through with
the new, improved gdb 4.13. This gdb features:
o kgdb support - if this works (and I urge folks to test it), we can
finally purge the old and hateful version of kgdb from our source
tree.
o attach/detach support. See comments in README.FreeBSD for more
details.
o Well, it's newer. Our previous version was 4.11.
Comments and flames to gj, of course! :-)
Thanks, Gary. Much appreciated. The previous state of gdb/kgdb has been a
thorn in all of our sides for some time..
Submitted by: gj
warning handling and allows for link-time warnings with a modified
version of gas.
Note: Not all of the newer bits were updated such as some of the non-x86
machine-dependant code is relevant to FreeBSD right now.
Obtained from: NetBSD
Change a round to a truncate. Problem reported from Christoph Kukulies:
9.8 2 / p did an IOT trap.
There is one remaining problem.: 9.8 2 % p shows on other machines 1.8
but does here in the moment 1.
in getting mirror-2.3 to work with FreeBSD, i found that timelocal.pl has
a bug. a patch is included below. this needs to be applied to both
src/gnu/usr.bin/perl/lib/timelocal.pl and
src/usr.sbin/xntpd/scripts/monitoring/timelocal.pl
Submitted by: jmb
already C++ safe, or C++ header files.
This fixes the problem with parse errors in header files when compiling C++
files.
Recompiling libg++ also solves the undefined synbols problem.
Notice that the libgcc DOESN'T change number, because there are no
changes.
Also now the gnu2bmake stuff is synchronized again.
I commit this so that others can test too.
You might want to postpone any "make worlds" until tomorrow, to
avoid any problems I didn't see in the first pass.
Thanks to Bruce for rounding up our changes to gcc.
more like binaries. This is hard to do using a general rules because
the natural `.sh:' rule has a null suffix and null suffixes are broken.
(With 1.1.5's make they sometimes work and sometimes cause core dumps.
2.0's make has a botched fixed and they never work.)
profiling and wchar_t. Profiled libraries will shrink.
tm.h:
Our wchar_t is int, not unsigned short.
Always link statically if profiling.
Define all the SPECs together.
final.c, tm.h:
Don't emit unused profiling code and data.
aux-output.c:
Always preserve the PIC register if profiling.
aux-output.c, tm.h:
Implement FUNCTION_PROFILER_EPILOGUE (currently not used).
New:
tm.h:
Set the target defaults in the correct way.
I know that many of these entries are bogus and need to be revisited,
but let's get the tree working again for now and then do a pass through
looking at all the __FreeBSD__ entries, shall we?
GCC-2.6.1 COMES TO FREEBSD-current
----------------------------------
Everybody needs to 'make world'.
Oakland, Nov 2nd 1994. In a surprise move this sunny afternoon, the release-
engineer for the slightly delayed FreeBSD-2.0, Poul-Henning Kamp (28),
decided to pull in the new version 2.6.1 of the GNU C-compiler.
The new version of the compiler was release today at noon, and hardly 9
hours later it was committed into the FreeBSD-current source-repository.
"It's is simply because we have had too much trouble with the version 2.6.0
of the compiler" Poul-Henning told the FreeBSD-Gazette, "we took a gamble
when we decided to use that as our compiler for the 2.0 release, but it
seems to pay of in the end now" he concludes.
The move has not been discussed on the "core" list at all, and will come as
a surprise for most Poul-Hennings peers. "I have only discussed it with
Jordan [J. K. Hubbard, the FreeBSD's resident humourist], and we agreed that
we needed to do it, so ... I did it!". After a breath he added with a grin:
"My email will probably get an all time 'disk-full' now!".
This will bring quite a flag-day to the FreeBSD developers, the patch-file
is almost 1.4 Megabyte, and they will have to run "make world" to get
entirely -current again. "Too bad, but we just had to do this." Was
the only comment from Poul-Henning to these problems.
When asked how this move would impact the 2.0 release-date, Poul-Hennings
face grew dark, he mumbled some very Danish words while he moved his fingers
in strange geometrical patterns. Immediately something ecclipsed the Sun, a
minor tremor shook the buildings, and the temperature fell significantly.
We decided not to pursure the question.
-----------
JOB-SECTION
-----------
Are you a dedicated GCC-hacker ?
We BADLY need somebody to look at the 'freebsd' OS in gcc, sanitize it and
carry the patches back to the GNU people. In particular, we need to get
out of the "i386-only" spot we are in now. I have the stuff to take a
gnu-dist into bmake-form, and will do that part.
Please apply to phk@freebsd.org
No Novice Need Apply.
Perl's scripts are still trying to execute perl out of /usr/gnu/bin/perl.
The hack Larry was using for h2ph.1 doesn't work with the new macros, so
make it a real man page.
Also, we weren't building the .ph files, add them as an afterinstall rule
in the x2p subdirectory.
and /usr/share/perl (library). The latter was chosen as analogous to other
directories already present in /usr/share, like /usr/share/groff_font and
(particularly) /usr/share/mk.
no longer link against the whole library, since they don't require much
from it, but just compile the few small modules they actually need static.
This should save a measurable amount of space; compare:
-r-xr-xr-x 1 bin bin 155648 Sep 18 18:00 cc1*
-r-xr-xr-x 1 root bin 1048576 Sep 18 17:33 cc1.noshae*
Of course, the library takes up a bit of space, but when you add in the
savings from the C++ compiler, you more than make up the difference:
-r--r--r-- 1 bin bin 1157344 Sep 18 18:27 /usr/lib/libcc_int.so.26.0
-r-xr-xr-x 1 bin bin 491520 Sep 18 18:27 /usr/libexec/cc1plus*
completely when ldconfig unlinks it. If init is shared, then the
referenced unlinked copy of the hints file created by running
ldconfig in /etc/rc caused the file system to be unclean after
every reboot.
we're not ready for yet. gcc and all profiled libraries will need
to be recompiled. I suspect that the dependencies aren't complete
enough to do this automatically.
automagically. -lfoo has to be right to work, but ${LIBFO0} is too
easy to forget or misspell; nothing checks it and it should be
different for shared libraries.
being created and config.h depended on Makefile.inc being in the wrong
directory so real dependencies were not being checked. The "depend"
target was not created either so "make depend" always found work to do.
Subject: man returns 1
In 1.1.5.1, man returns a status of 1 if the lookup succeeds and 0 if
it fails. Here is a patch for what I believe is a simple oversight:
Submitted by: jkh
FreeBSD system sources installs itself as the standard cc and c++. I've
fixed c++ to call cc instead of gcc and removed all the symlinks
that get created to g** version of the binaries. This means that
you can install a second version of gcc that does use the g prefix
alongside the "system" version of gcc. The only conflict is libgcc
but since we install it as libcc.so.26 and nothing else is likely
to that should be ok.
Reviewed by:
Submitted by:
I know that I said earlier that this should be unconditional behaviour,
but I thought about it a little more and concluded that the principle of least
surprise dictates that I make it an option.
handling of errors through the standard err() and warn()
more fixes for Geoff Rehmet's NULL pointer bug.
fixes NULL pointer bugs when linking mono and nested X servers.
supports a `-nostdlib' option.
accept object files without a symbol table
don't attempt dynamic linking when `-A' is given
a few variable names have chaged (desc -> fd), and the formatting has
changed which should make it much easier to track his sources.
I tested 'make world' for /usr/src and X twice with these changes.
Paul Kranenburg's description:
ld is in error here, assuming that symbols with N_EXT set always have an
entry in the (global) symbol table: this is not the case for C++ generated
constructor/destructor symbols. I can reproduce your failure by fudging
a "multiply defined" constructor symbol by hand. Checking for `g == NULL'
seems to be a ok as a fence for now.
So:
for now, in do_file_warnings() we check if g == NULL, before trying to generate
any warning messages. This prevents a NULL pointer dereference.
