- recover rrt_gw setting for non-p2p case. otherwise, we will not
be able to recover interface route on interface down -> up
transition.
- clarify loop exit condition
Obtained from: KAME
MFC after: 1 week
the interface wake up. it can be started anytime even when there is
no network interface on the list of intarfaces in the kernel.
- get a correct link ID for each interface at initialization
(using scope libraries if HAVE_SCOPELIB is defined).
- fill in sin6_scope_id correctly before sendmsg().
Obtained from: KAME
MFC after: 1 week
- deprecate routes#N, as it is hard to keep consistency with
rtprefixN. accept any number of "rtprefix", "rtrefix0",
..., "rtprefix99".
- deprecate "addrs#N", as it is difficult for users to keep
consistency with "addrN".
accept 100 prefix info in maximum - like "addr", "addr0"
... "addr99". WARNS=2 clean on netbsd.
old configuration file should work just fine.
behavior change:
previously, we rejected "addrN" if there's "addr", and we rejected
"addr" if there is "addrN". now we accept both without problem.
- when an advertised prefix configured from the kernel has been added
or invalidated, notice the change in a short delay.
- when invalidating a prefix, do not bark even if there is
inconsistency about prefix lifetimes.
- wrap more specific route info code into ROUTEINFO.
Obtained from: KAME
MFC after: 1 week
file descriptors that are used for input and output. That allows
one, for example, to use nghook to bi-directionally pipe the
input and output into/from another non-netgraph-aware program.
to acpidb. The same problem exists in iasl. Add JIT patching there
too.
Add a comment to both makefiles to increase the chance that both
kludges are removed when a real solution is committed.
osunixxf.c on the fly. This avoids having to pull it from the vendor
branch or otherwise pollute the repository with new short-lived files.
This should hold until the real fix arrives.
If the value of OtherConfigFlag changes from FALSE to TRUE, the
host should invoke the stateful autoconfiguration protocol,
requesting information.
[RFC 2462 Section 5.5.3]
Obtained from: KAME
MFC after: 1 week
control whether to accept RAs per-interface basis.
the new stuff ensures the backward compatibility;
- the kernel does not accept RAs on any interfaces by default.
- since the default value of the flag bit is on, the kernel accepts RAs
on all interfaces when net.inet6.ip6.accept_rtadv is 1.
Obtained from: KAME
MFC after: 1 week
What is the HPET I hear you ask? It is the High Precision Event Timer
that is supposed to supplement and eventually replace the 8254 timer and
the RTC periodic interrupts. Among other things, it is 64 bit (can be
run in 32 bit mode for 32 bit cpus), and is suitable as a replacement for
the ACPI timer on SMP systems (the specs are much better) and as a
replacement for the ITC based synthetic clock for on ia64 systems.
It seems IA64 and AMD64 systems tend to have this. It is likely to start
showing up in i386 systems if it isn't already on some of them.
a constant string of little information these days.
This removes the need to #include <vm/swap_pager.h> which is due to
become a kernel only include file.
incoming remote telephone numbers and subaddresses ignored the configured
list completely since it was always terminated by a break at the end of
the first run (which was a leftover from the implementation of subaddresses).
Submitted by: Christian Ullrich <chris@chrullrich.de>
The output format specifier for the round-trip time in ping6 should be
changed to %.3f instead of %g since %g doesn't accurately represent the
precision of the number being output. In particular, %g truncates trailing
zeroes. 0.01 ms does not mean the same thing as 0.010 ms. Although they
are numerically identical, they do not have the same precision.
PR: bin/52324, bin/52750
Submitted by: dg
MFC after: 1 week
the scope of operation to the ARP entries on a particular
interface. It should be useful on machines with numerous
network interfaces, e.g., on inter-VLAN routers.
PR: bin/54151
Submitted by: Dmitry Morozovsky <marck at rinet.ru>
Discussed on: -net
MFC after: 2 weeks
(or possibly testing) the previous formula worked for the default
constants compiled into inetd, but if you recompiled with different
values of CHTSIZE and CHTGRAN the calculation might not have worked.
PR: 54354
Submitted by: Claus Assmann <ca@sendmail.org>
Submitted by: Jose Marcio Martins da Cruz <Jose-Marcio.Martins@ensmp.fr>
MFC after: 5 days
format of 'sccsid' lines so they consistently match style(9).
A minor Makefile change is needed so lptest.c can find lp.cdefs.h.
Reviewed by: discussed with bde and obrien
MFC after: 15 days
format of 'sccsid' lines so they consistently match style(9)
Also the 'sccsid' line is formatted to match style(9), and
a 'From:' is removed so the sccsid returns to what it was back
in the days of '-r CSRG' (1996).
Reviewed by: discussed with bde and obrien
MFC after: 15 days
programs, minor Makefile changes are needed to find lp.cdefs.h.
For lpf.c, the 'sccsid' line is formatted to match style(9), and
a 'From:' is removed so the sccsid returns to what it was back
in the days of '-r CSRG' (1994).
Reviewed by: discussed with bde and obrien
MFC after: 15 days
format of 'sccsid' lines so they consistently match style(9)
guidelines. Note that this means you will have to add '-a' to
the 'strings' command when searching for rcs ids, eg:
strings -a /usr/sbin/lpc | grep '$FreeBSD'
Reviewed by: discussed on cvs-src & with bde and obrien
MFC after: 15 days
'#ifdef lint/#endif' around the lines should not have been removed.
Also add blank lines where one (per file) was missing.
Reviewed by: First part noticed by bde, blank lines noticed by me
MFC after: 15 days
get from '-r CSRG', instead of having that sccsid as a comment.
(this is the sccsid from 1996 -- there have been many changes to
printcap.c since then!)
MFC after: 15 days
format of 'sccsid' lines so they consistently match style(9)
guidelines. Inspired by recent update to lpd.c by charnier.
Reviewed by: discussed on cvs-src & with bde and obrien
MFC after: 15 days
source to use __FBSDID() for setting rcsids. Also fix the format
of 'sccsid' lines to consistently match style(9) guidelines.
Reviewed by: discussed with bde and obrien
MFC after: 15 days
somewhat easier to build this lpr on other operating systems.
This simply includes <sys/cdefs.h> when that is appropriate,
and then checks for any cdefs-ish macros that lpr uses, and
defines them if they don't already exist. This is only a start
at making freebsd's lpr less of a hassle to port. It is mainly
added so all of lpr can be changed to use the __FBSDID() macro,
without making it *more* of a hassle to build on other OS's.
Reviewed by: discussed with bde and obrien
MFC after: 15 days
I am the maintainer of CTM. There is a problem that when very large deltas
are created, that the program ctm_smail, which is responsible for mailing
the deltas out, will instead create a single message that says the delta
is too large. However, if the -q option is set, instead of placing this
message in the queue (as it would have done with the deltas), it mails it
out directly. This conflicts with the current working of CTM in that the
email address is set as %%REPLACE-ME%% so that the created mailing pieces
can be signed by gnu-pgp, and then have the mailing address changed.
This fix means that if the -q option is set, and the delta is too large,
the "too large" message is placed in the queue.
Also, I made the "too large" message a little more up to date.
Submitted by: Stephen Montgomery-Smith <stephen@math.missouri.edu>
PR: bin/50328
MFC After: 2 weeks
This option adds Postfix and Exim to the list, however, qmail is not added
due to license restrictions.
Collaborated with: Simon L. Nielsen <simon@nitro.dk>
Reviewed by: jhb, re@, -audit.
- Use getifaddrs() instead of rolling our own buggy one. Previously,
rarpd(8) would fail to see some interfaces because of a hardcoded limit.
It now successfully sees any interface in the system, and this also makes
the code _much_ simpler.
- Replace strncpy() calls with strlcpy() calls. Some uses of strncpy()
were bogus ; the code wasn't ensuring that the string was NUL terminated.
- Don't try to guard about select() FD_* macros being undefined.
- Use IF_NAMESIZE and ETHER_ADDR_LEN macros where appropriate.
- Add static keywords to function definitions for consistency, since
the prototypes have it (I wonder why GCC didn't complain about this).
- Remove compat code for very old BSD versions and SunOS.
- Remove code for systems not having the dirent.h header.
- The code is now WARNS=5 clean so mark it as such.
- Don't add -DTFTP_DIR="/tftpboot" to the build command line since it's
the default.
MFC after: 2 weeks
is common in British English, while "toward" is the preferred form in
American English. Use the American form for consistency.
Correct the date on the manual page.
Submitted by: Tom Rhodes <trhodes@freebsd.org>,
underway@comcast.net (Gary W. Swearingen)
executable file even if the specified action/filename does not
contain a '/' character; convert execv() to execvp().
Submitted by: Christian S.J. Peron <maneo@bsdpro.com>
PR: bin/54109
- Reordered #includes
- Only include <sys/types.h>, not it and <sys/cdefs.h>
o style.Makefile(5) fixes
- No SRCS= line when only one src file with same name as program
o Use warn()/errx() instead of fprintf()
- Integrated patch from Philippe Charnier <charnier@xp11.frmug.org>
Approved by: jeff (mentor)
They don't have alot of reason to be in sbin and contribute to library
bloat in the dynamic case. If you are using any of these filesystem
type to hold your /usr, please seek professional help.
The actual code was repo-copied by joe.
o relax some error handling so other drivers (e.g. ath) are usable
o revert ap scanning logic to old scheme
o add to capability info printing for 11a and 11g
tell them that they also need to use devfs rules to prevent
inappropriate devices from appearing in the jail; add an Xref. In
earlier versions of this man page, the user was instructed to use
sh MAKEDEV jail, which only created a minimal set of device nodes.
This commit has two pieces. One half is the watchdog kernel code which lives
primarily in hardclock() in sys/kern/kern_clock.c. The other half is a userland
daemon which, when run, will keep the watchdog from firing while the userland
is intact and functioning.
Approved by: jeff (mentor)
These are probably machine independent, but
there is no way for the developers to test them other than on x86.
They will become MD as testing becomes possible.
- Add a command line switch to trigger POWERSTATECHANGE actions on
un-reported power state changes.
PR: i386/32251
Submitted by: Walter C. Pelissero <walter@pelissero.org>
from .c files. Actually, this is overkill, as the .ln file targets
are assumed from .? (any) files. This is not a problem in practice,
merely a bit untidy, as the linting rules DTRT. See the sys/conf/*
and sys/mk/* files for usage.
Only call pw_mkdb if passfile == _PATH_MASTERPASSWD.
Otherwise, rename master.passwd to a temp filename, rename
the new passwd to master.passwd, and let yppwupdate update
passwd as it sees fit.
Reviewed by: phk
Tested by: genesys
Otherwise, rename master.passwd to a temp filename, rename
the new passwd to master.passwd, and let yppwupdate update
passwd as it sees fit.
PR: 52601, 7968
Reviewed by: des
Submitted by: Dan Nelson <dnelson@allantgroup.com>
and libdevstat, since the new way of doing things is to just list
maintainership in src/MAINTAINERS.
Also, remove duplicate entries in src/MAINTAINERS for those utilities. I
already had entries for them.
using the somewhat more hackish variant on extattr_get_*() to retrieve
the attribute list on an object.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
'use entire disk'. Neither for ia64 while I'm here - it needs a MBR if
its going to use fdisk+disklabel. The ia64 case is mostly academic though
because you'd be creating two partitions (dos + freebsd) rather than
a single freebsd-only partition.
