Commit Graph

280 Commits

Author SHA1 Message Date
Mateusz Guzik
c48f897bbe smp: fix smp_rendezvous_cpus_retry usage before smp starts
Since none of the other CPUs are running there is nobody to clear their
entries and the routine spins indefinitely.
2020-11-19 04:27:51 +00:00
Mateusz Guzik
6fed89b179 kern: clean up empty lines in .c and .h files 2020-09-01 22:12:32 +00:00
Konstantin Belousov
ca9a39acb3 Provide more correct description for sysctl kern.smp.cores.
Reported by:	dewayne@heuristicsystems.com.au
PR:	248454
Sponsored by:	The FreeBSD Foundation
MFC after:	3 days
2020-08-03 17:17:17 +00:00
Pawel Biernacki
7029da5c36 Mark more nodes as CTLFLAG_MPSAFE or CTLFLAG_NEEDGIANT (17 of many)
r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marked).
Use it in preparation for a general review of all nodes.

This is non-functional change that adds annotations to SYSCTL_NODE and
SYSCTL_PROC nodes using one of the soon-to-be-required flags.

Mark all obvious cases as MPSAFE.  All entries that haven't been marked
as MPSAFE before are by default marked as NEEDGIANT

Approved by:	kib (mentor, blanket)
Commented by:	kib, gallatin, melifaro
Differential Revision:	https://reviews.freebsd.org/D23718
2020-02-26 14:26:36 +00:00
Mateusz Guzik
e4f584971b Add smp_rendezvous_cpus_retry
This is a wrapper around smp_rendezvous_cpus which enables use of IPI
handlers which can fail and require retrying.

wait_func argument is added to to provide a routine which can be used to
poll CPU of interest for when the IPI can be retried.

Handlers which succeed must call smp_rendezvous_cpus_done to denote that
fact.

Discussed with:	 jeff
Differential Revision:	https://reviews.freebsd.org/D23582
2020-02-12 11:16:55 +00:00
Mateusz Guzik
3ff65f71cb Remove duplicated empty lines from kern/*.c
No functional changes.
2020-01-30 20:05:05 +00:00
Mateusz Guzik
2823710f05 Tidy up 2 comments in smp_rendezvous_cpus. 2020-01-30 20:02:14 +00:00
Mateusz Guzik
7ab99925fd Assert that smp_rendezvous_cpus is called with interrupts enabled. 2020-01-30 19:38:51 +00:00
Mateusz Guzik
879e0604ee Add KERNEL_PANICKED macro for use in place of direct panicstr tests 2020-01-12 06:07:54 +00:00
Mateusz Guzik
e0a1a1e6cb smp: cast the read in quiesce_all_critical through void *
Fixes compilation on some 32-bit arm platforms.

Sponsored by:	The FreeBSD Foundation
2019-11-30 19:33:02 +00:00
Mateusz Guzik
5032fe17a2 Add a way to inject fences using IPIs
A variant of this facility was already used by rmlocks where IPIs would
enforce ordering.

This allows to elide fences where they are rarely needed and the cost of
IPI (should it be necessary) is cheaper.

Reviewed by:	kib, jeff (previous version)
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D21740
2019-11-30 17:22:10 +00:00
Conrad Meyer
665919aaaf x86: Implement MWAIT support for stopping a CPU
IPI_STOP is used after panic or when ddb is entered manually.  MONITOR/
MWAIT allows CPUs that support the feature to sleep in a low power way
instead of spinning.  Something similar is already used at idle.

It is perhaps especially useful in oversubscribed VM environments, and is
safe to use even if the panic/ddb thread is not the BSP.  (Except in the
presence of MWAIT errata, which are detected automatically on platforms with
known wakeup problems.)

It can be tuned/sysctled with "machdep.stop_mwait," which defaults to 0
(off).  This commit also introduces the tunable
"machdep.mwait_cpustop_broken," which defaults to 0, unless the CPU has
known errata, but may be set to "1" in loader.conf to signal that mwait
wakeup is broken on CPUs FreeBSD does not yet know about.

Unfortunately, Bhyve doesn't yet support MONITOR extensions, so this doesn't
help bhyve hypervisors running FreeBSD guests.

Submitted by:   Anton Rang <rang AT acm.org> (earlier version)
Reviewed by:	kib
Sponsored by:	Dell EMC Isilon
Differential Revision:	https://reviews.freebsd.org/D20135
2019-05-04 20:34:26 +00:00
John Baldwin
2e43efd0bb Drop "All rights reserved" from my copyright statements.
Reviewed by:	rgrimes
MFC after:	1 month
Differential Revision:	https://reviews.freebsd.org/D19485
2019-03-06 22:11:45 +00:00
Conrad Meyer
6b83069e05 Expose threads-per-core and physical core count information
With new sysctls (to the best of our ability do detect them).  Restructured
smp.4 slightly for clarity (keep relevant stuff closer to the top) while
documenting.

Reviewed by:	markj, jhibbits (ppc parts)
MFC after:	3 days
Sponsored by:	Dell EMC Isilon
Differential Revision:	https://reviews.freebsd.org/D18322
2019-01-04 18:31:17 +00:00
Bruce Evans
da9fba5447 Use resume_cpus() instead of restart_cpus() to resume from ACPI suspension.
restart_cpus() worked well enough by accident.  Before this set of fixes,
resume_cpus() used the same cpuset (started_cpus, meaning CPUs directed to
restart) as restart_cpus().  resume_cpus() waited for the wrong cpuset
(stopped_cpus) to become empty, but since mixtures of stopped and suspended
CPUs are not close to working, stopped_cpus must be empty when resuming so
the wait is null -- restart_cpus just allows the other CPUs to restart and
returns without waiting.

Fix resume_cpus() to wait on a non-wrong cpuset for the ACPI case, and
add further kludges to try to keep it working for the XEN case.  It
was only used for XEN.  It waited on suspended_cpus.  This works for
XEN.  However, for ACPI, resuming is a 2-step process.  ACPI has already
woken up the other CPUs and removed them from suspended_cpus.  This
fix records the move by putting them in a new cpuset resuming_cpus.
Waiting on suspended_cpus would give the same null wait as waiting on
stopped_cpus.  Wait on resuming_cpus instead.

Add a cpuset toresume_cpus to map the CPUs being told to resume to keep
this separate from the cpuset started_cpus for mapping the CPUs being told
to restart.  Mixtures of stopped and suspended/resuming CPUs are still far
from working.  Describe new and some old cpusets in comments.

Add further kludges to cpususpend_handler() to try to avoid breaking it
for XEN.  XEN doesn't use resumectx(), so it doesn't use the second
return path for savectx(), and it goes from the suspended state directly
to the restarted state, while ACPI resume goes through the resuming state.
Enter the resuming state early for all cases so that resume_cpus can test
for being in this state and not have to worry about the intermediate
!suspended state for ACPI only.

Reviewed by:	kib
2017-12-21 09:17:48 +00:00
Pedro F. Giffuni
8a36da99de sys/kern: adoption of SPDX licensing ID tags.
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
2017-11-27 15:20:12 +00:00
Mateusz Guzik
c69a1a50cd Don't take Giant for SMP status and cpu topology sysctls.
Not only this lock doesn't play any role here, dirtying it slows down
other things a little bit as giant-held checks (e.g. DROP_GIANT) are
spread all over the kernel.

MFC after:	1 week
2017-10-18 22:00:44 +00:00
Conrad Meyer
eee87314d3 Improve scheduler performance
Improve scheduler performance by flattening nonsensical topology layers
(layers with only one child don't serve any purpose).

This is especially relevant on non-AMD Zen systems after r322776.  On my
dual core Intel laptop, this brings the kern.sched.topology_spec table down
from three levels to two.

Submitted by:	jeff
Reviewed by:	attilio
Sponsored by:	Dell EMC Isilon
2017-08-27 05:14:48 +00:00
Conrad Meyer
bb14d5643b subr_smp: Clean up topology analysis, add additional layers
Rather than repeatedly nesting loops, separate concerns with a single loop
per call stack level.  Use a table to drive the recursive routine.  Handle
missing topology layers more gracefully (infer a single unit).

Analyze some additional optional layers which may be present on e.g. AMD Zen
systems (groups, aka dies, per package; and cachegroups, aka CCXes, per
group).

Display that additional information in the boot-time topology information,
when it is relevent (non-one).

Reviewed by:	markj@, mjoras@ (earlier version)
Sponsored by:	Dell EMC Isilon
Differential Revision:	https://reviews.freebsd.org/D12019
2017-08-22 00:10:15 +00:00
Conrad Meyer
f3fed04372 Fix a couple of comment typos
No functional change.

Submitted by:	Anton Rang <anton.rang AT isilon.com>
Sponsored by:	Dell EMC Isilon
2017-08-15 02:21:02 +00:00
Patrick Kelsey
67d955aab4 Corrected misspelled versions of rendezvous.
The MFC will include a compat definition of smp_no_rendevous_barrier()
that calls smp_no_rendezvous_barrier().

Reviewed by:	gnn, kib
MFC after:	1 week
Differential Revision:	https://reviews.freebsd.org/D10313
2017-04-09 02:00:03 +00:00
Konstantin Belousov
835c2787be Handle broadcast NMIs.
On several Intel chipsets, diagnostic NMIs sent from BMC or NMIs
reporting hardware errors are broadcasted to all CPUs.

When kernel is configured to enter kdb on NMI, the outcome is
problematic, because each CPU tries to enter kdb.  All CPUs are
executing NMI handlers, which set the latches disabling the nested NMI
delivery; this means that stop_cpus_hard(), used by kdb_enter() to
stop other cpus by broadcasting IPI_STOP_HARD NMI, cannot work.  One
indication of this is the harmless but annoying diagnostic "timeout
stopping cpus".

Much more harming behaviour is that because all CPUs try to enter kdb,
and if ddb is used as debugger, all CPUs issue prompt on console and
race for the input, not to mention the simultaneous use of the ddb
shared state.

Try to fix this by introducing a pseudo-lock for simultaneous attempts
to handle NMIs.  If one core happens to enter NMI trap handler, other
cores see it and simulate reception of the IPI_STOP_HARD.  More,
generic_stop_cpus() avoids sending IPI_STOP_HARD and avoids waiting
for the acknowledgement, relying on the nmi handler on other cores
suspending and then restarting the CPU.

Since it is impossible to detect at runtime whether some stray NMI is
broadcast or unicast, add a knob for administrator (really developer)
to configure debugging NMI handling mode.

The updated patch was debugged with the help from Andrey Gapon (avg)
and discussed with him.

Sponsored by:	The FreeBSD Foundation
MFC after:	2 weeks
Differential revision:	https://reviews.freebsd.org/D8249
2016-10-24 16:40:27 +00:00
Bryan Drewery
533f3e1026 Reduce duplicated logic for !SMP
Sponsored by:	EMC / Isilon Storage Division
2016-08-30 19:26:07 +00:00
Andriy Gapon
a449bdba32 topo_set_pu_id: turn a check into an assertion
The new id must not be present in any cpu set in any topology element.

MFC after:	30 days
2016-04-08 11:59:11 +00:00
Andriy Gapon
c77702de74 x86 topo: add some comments, descriptions and references to documentation
Plus a minor cosmetic change.

MFC after:	1 month
2016-04-05 10:36:40 +00:00
Andriy Gapon
4725e6bff3 new x86 smp topology detection code
Previously, the code determined a topology of processing units
(hardware threads, cores, packages) and then deduced a cache topology
using certain assumptions.  The new code builds a topology that
includes both processing units and caches using the information
provided by the hardware.

At the moment, the discovered full topology is used only to creeate
a scheduling topology for SCHED_ULE.
There is no KPI for other kernel uses.

Summary:
- based on APIC ID derivation rules for Intel and AMD CPUs
- can handle non-uniform topologies
- requires homogeneous APIC ID assignment (same bit widths for ID
  components)
- topology for dual-node AMD CPUs may not be optimal
- topology for latest AMD CPU models may not be optimal as the code is
  several years old
- supports only thread/package/core/cache nodes

Todo:
  - AMD dual-node processors
  - latest AMD processors
  - NUMA nodes
  - checking for homogeneity of the APIC ID assignment across packages
  - more flexible cache placement within topology
  - expose topology to userland, e.g., via sysctl nodes

Long term todo:
  - KPI for CPU sharing and affinity with respect to various resources
    (e.g., two logical processors may share the same FPU, etc)

Reviewed by:	mav
Tested by:	mav
MFC after:	1 month
Differential Revision:	https://reviews.freebsd.org/D2728
2016-04-04 16:09:29 +00:00
Tijl Coosemans
27f38a8d69 Since r289279 bufinit() uses mp_ncpus, but some architectures set this
variable during mp_start() which is too late.  Move this to mp_setmaxid()
where other architectures set it and move x86 assertions to MI code.

Reviewed by:	kib (x86 part)
2015-11-08 14:26:50 +00:00
Konstantin Belousov
e637a6e3f9 The smp_rendezvous_cpus() function should ensure that all accesses
done by the functions called on other CPUs, are visible to the caller.
Pair otherwise useless acquire on smp_rv_waiters[3] with a release add
to ensure synchronized with relation, which guarantees visibility.

Reviewed by:	alc
Sponsored by:	The FreeBSD Foundation
MFC after:	3 weeks
2015-07-21 22:56:46 +00:00
Hans Petter Selasky
af3b2549c4 Pull in r267961 and r267973 again. Fix for issues reported will follow. 2014-06-28 03:56:17 +00:00
Glen Barber
37a107a407 Revert r267961, r267973:
These changes prevent sysctl(8) from returning proper output,
such as:

 1) no output from sysctl(8)
 2) erroneously returning ENOMEM with tools like truss(1)
    or uname(1)
 truss: can not get etype: Cannot allocate memory
2014-06-27 22:05:21 +00:00
Hans Petter Selasky
3da1cf1e88 Extend the meaning of the CTLFLAG_TUN flag to automatically check if
there is an environment variable which shall initialize the SYSCTL
during early boot. This works for all SYSCTL types both statically and
dynamically created ones, except for the SYSCTL NODE type and SYSCTLs
which belong to VNETs. A new flag, CTLFLAG_NOFETCH, has been added to
be used in the case a tunable sysctl has a custom initialisation
function allowing the sysctl to still be marked as a tunable. The
kernel SYSCTL API is mostly the same, with a few exceptions for some
special operations like iterating childrens of a static/extern SYSCTL
node. This operation should probably be made into a factored out
common macro, hence some device drivers use this. The reason for
changing the SYSCTL API was the need for a SYSCTL parent OID pointer
and not only the SYSCTL parent OID list pointer in order to quickly
generate the sysctl path. The motivation behind this patch is to avoid
parameter loading cludges inside the OFED driver subsystem. Instead of
adding special code to the OFED driver subsystem to post-load tunables
into dynamically created sysctls, we generalize this in the kernel.

Other changes:
- Corrected a possibly incorrect sysctl name from "hw.cbb.intr_mask"
to "hw.pcic.intr_mask".
- Removed redundant TUNABLE statements throughout the kernel.
- Some minor code rewrites in connection to removing not needed
TUNABLE statements.
- Added a missing SYSCTL_DECL().
- Wrapped two very long lines.
- Avoid malloc()/free() inside sysctl string handling, in case it is
called to initialize a sysctl from a tunable, hence malloc()/free() is
not ready when sysctls from the sysctl dataset are registered.
- Bumped FreeBSD version to indicate SYSCTL API change.

MFC after:	2 weeks
Sponsored by:	Mellanox Technologies
2014-06-27 16:33:43 +00:00
Scott Long
60ad8150c7 Retire smp_active. It was racey and caused demonstrated problems with
the cpufreq code.  Replace its use with smp_started.  There's at least
one userland tool that still looks at the kern.smp.active sysctl, so
preserve it but point it to smp_started as well.

Discussed with: peter, jhb
MFC after: 3 days
Obtained from: Netflix
2014-04-26 20:27:54 +00:00
John Baldwin
e432d5f6a7 Drop the 3rd clause from all 3 clause BSD licenses where I am the sole
holder to convert them to 2 clause BSD licenses.

MFC after:	1 week
2014-02-05 18:13:27 +00:00
Justin T. Gibbs
255424ddb7 Fix ia64 and mips kernel builds due to XENHVM=>GENERIC integration in
revision 255744.

sys/kern/subr_smp.c:
	IPI_SUSPEND is only available on amd64 and i386.  Protect
	new uses of this constant with #ifdefs to avoid impacting
	other platforms.

Approved by:	re (blanket Xen)
2013-09-22 02:46:13 +00:00
Justin T. Gibbs
566a5f5020 Merge Xen PVHVM support into the GENERIC kernel config for both
amd64 and i386.

Submitted by:	Roger Pau Monné
Sponsored by:	Citrix Systems R&D
Reviewed by:	gibbs
Approved by:	re (blanket Xen)
MFC after:	2 weeks

sys/amd64/amd64/mp_machdep.c:
sys/amd64/include/cpu.h:
sys/i386/i386/mp_machdep.c:
sys/i386/include/cpu.h:
	- Introduce two new CPU hooks for initialization and resume
	  purposes. This allows us to get rid of the XENHVM ifdefs in
	  mp_machdep, and also sets some hooks into common code that can be
	  used by other hypervisor implementations.

sys/amd64/conf/XENHVM:
sys/i386/conf/XENHVM:
	- Remove these configs now that GENERIC has builtin support for Xen
	  HVM.

sys/kern/subr_smp.c:
	- Make sure there are no pending IPIs when suspending a system.

sys/x86/xen/hvm.c:
	- Add cpu init and resume vectors that are called from mp_machdep
	  using the new hooks.
	- Only clear the vcpu_info mapping data on resume.  It is already
	  clear for the BSP on a cold boot and is set correctly as APs
	  are started.
	- Gate xen_hvm_init_cpu only to systems running under Xen.

sys/x86/xen/xen_intr.c:
	 - Gate the setup of event channels only to systems running under Xen.
2013-09-20 22:59:22 +00:00
Justin T. Gibbs
428b7ca290 Add support for suspend/resume/migration operations when running as a
Xen PVHVM guest.

Submitted by:	Roger Pau Monné
Sponsored by:	Citrix Systems R&D
Reviewed by:	gibbs
Approved by:	re (blanket Xen)
MFC after:	2 weeks

sys/amd64/amd64/mp_machdep.c:
sys/i386/i386/mp_machdep.c:
	- Make sure that are no MMU related IPIs pending on migration.
	- Reset pending IPI_BITMAP on resume.
	- Init vcpu_info on resume.

sys/amd64/include/intr_machdep.h:
sys/i386/include/intr_machdep.h:
sys/x86/acpica/acpi_wakeup.c:
sys/x86/x86/intr_machdep.c:
sys/x86/isa/atpic.c:
sys/x86/x86/io_apic.c:
sys/x86/x86/local_apic.c:
	- Add a "suspend_cancelled" parameter to pic_resume().  For the
	  Xen PIC, restoration of interrupt services differs between
	  the aborted suspend and normal resume cases, so we must provide
	  this information.

sys/dev/acpica/acpi_timer.c:
sys/dev/xen/timer/timer.c:
sys/timetc.h:
	- Don't swap out "suspend safe" timers across a suspend/resume
	  cycle.  This includes the Xen PV and ACPI timers.

sys/dev/xen/control/control.c:
	- Perform proper suspend/resume process for PVHVM:
		- Suspend all APs before going into suspension, this allows us
		  to reset the vcpu_info on resume for each AP.
		- Reset shared info page and callback on resume.

sys/dev/xen/timer/timer.c:
	- Implement suspend/resume support for the PV timer. Since FreeBSD
	  doesn't perform a per-cpu resume of the timer, we need to call
	  smp_rendezvous in order to correctly resume the timer on each CPU.

sys/dev/xen/xenpci/xenpci.c:
	- Don't reset the PCI interrupt on each suspend/resume.

sys/kern/subr_smp.c:
	- When suspending a PVHVM domain make sure there are no MMU IPIs
	  in-flight, or we will get a lockup on resume due to the fact that
	  pending event channels are not carried over on migration.
	- Implement a generic version of restart_cpus that can be used by
	  suspended and stopped cpus.

sys/x86/xen/hvm.c:
	- Implement resume support for the hypercall page and shared info.
	- Clear vcpu_info so it can be reset by APs when resuming from
	  suspension.

sys/dev/xen/xenpci/xenpci.c:
sys/x86/xen/hvm.c:
sys/x86/xen/xen_intr.c:
	- Support UP kernel configurations.

sys/x86/xen/xen_intr.c:
	- Properly rebind per-cpus VIRQs and IPIs on resume.
2013-09-20 05:06:03 +00:00
Jeff Roberson
5b39d5c739 - Correctly handle EWOULDBLOCK in quiesce_cpus
Discussed with:	mav
2012-12-19 20:08:06 +00:00
Jeff Roberson
28d91af30f - Implement run-time expansion of the KTR buffer via sysctl.
- Implement a function to ensure that all preempted threads have switched
   back out at least once.  Use this to make sure there are no stale
   references to the old ktr_buf or the lock profiling buffers before
   updating them.

Reviewed by:	marius (sparc64 parts), attilio (earlier patch)
Sponsored by:	EMC / Isilon Storage Division
2012-11-15 00:51:57 +00:00
Mitsuru IWASAKI
c1b0dc80b5 Another fixe for r236772.
- Adjust correct cpuset (stopped_cpus/suspended_cpus) for
  cpu_spinwait() in generic_stop_cpus().
2012-06-11 18:47:26 +00:00
Mitsuru IWASAKI
fb864578af Add x86/acpica/acpi_wakeup.c for amd64 and i386. Difference of
suspend/resume procedures are minimized among them.

common:
- Add global cpuset suspended_cpus to indicate APs are suspended/resumed.
- Remove acpi_waketag and acpi_wakemap from acpivar.h (no longer used).
- Add some variables in acpi_wakecode.S in order to minimize the difference
  among amd64 and i386.
- Disable load_cr3() because now CR3 is restored in resumectx().

amd64:
- Add suspend/resume related members (such as MSR) in PCB.
- Modify savectx() for above new PCB members.
- Merge acpi_switch.S into cpu_switch.S as resumectx().

i386:
- Merge(and remove) suspendctx() into savectx() in order to match with
  amd64 code.

Reviewed by:	attilio@, acpi@
2012-06-09 00:37:26 +00:00
Mitsuru IWASAKI
e3fd0bc1b2 Add SMP/i386 suspend/resume support.
Most part is merged from amd64.

- i386/acpica/acpi_wakecode.S
Replaced with amd64 code (from realmode to paging enabling code).

- i386/acpica/acpi_wakeup.c
Replaced with amd64 code (except for wakeup_pagetables stuff).

- i386/include/pcb.h
- i386/i386/genassym.c
Added PCB new members (CR0, CR2, CR4, DS, ED, FS, SS, GDT, IDT, LDT
and TR) needed for suspend/resume, not for context switch.

- i386/i386/swtch.s
Added suspendctx() and resumectx().
Note that savectx() was not changed and used for suspending (while
amd64 code uses it).
BSP and AP execute the same sequence, suspendctx(), acpi_wakecode()
and resumectx() for suspend/resume (in case of UP system also).

- i386/i386/apic_vector.s
Added cpususpend().

- i386/i386/mp_machdep.c
- i386/include/smp.h
Added cpususpend_handler().

- i386/include/apicvar.h
- kern/subr_smp.c
- sys/smp.h
Added IPI_SUSPEND and suspend_cpus().

- i386/i386/initcpu.c
- i386/i386/machdep.c
- i386/include/md_var.h
- pc98/pc98/machdep.c
Moved initializecpu() declarations to md_var.h.

MFC after:	3 days
2012-05-18 18:55:58 +00:00
Ed Schouten
6472ac3d8a Mark all SYSCTL_NODEs static that have no corresponding SYSCTL_DECLs.
The SYSCTL_NODE macro defines a list that stores all child-elements of
that node. If there's no SYSCTL_DECL macro anywhere else, there's no
reason why it shouldn't be static.
2011-11-07 15:43:11 +00:00
Attilio Rao
2b10b1f872 Disable interrupt and preemption for smp_rendezvous() also in the
UP/!SMP case.
The callbacks may be relying on this feature and having 2 different
ways to deal with them is not correct.

Reported by:	rstone
Reviewed by:	jhb
MFC after:	2 weeks
2011-11-03 14:36:56 +00:00
Andriy Gapon
35edc49853 smp_rendezvous: master cpu should wait until all slaves are fully done
This is a followup to r222032 and a reimplementation of it.
While that revision fixed the race for the smp_rv_waiters[2] exit
sentinel, it still left a possibility for a target CPU to access
stale or wrong smp_rv_func_arg in smp_rv_teardown_func.
To fix this race the slave CPUs signal when they are really fully
done with the rendezvous and the master CPU waits until all slaves
are done.

Diagnosed by:	kib
Reviewed by:	jhb, mlaier, neel
Approved by:	re (kib)
MFC after:	2 weeks
2011-07-30 20:29:39 +00:00
Robert Watson
ff66f6a404 Define two new sysctl node flags: CTLFLAG_CAPRD and CTLFLAG_CAPRW, which
may be jointly referenced via the mask CTLFLAG_CAPRW.  Sysctls with these
flags are available in Capsicum's capability mode; other sysctl nodes are
not.

Flag several useful sysctls as available in capability mode, such as memory
layout sysctls required by the run-time linker and malloc(3).  Also expose
access to randomness and available kernel features.

A few sysctls are enabled to support name->MIB conversion; these may leak
information to capability mode by virtue of providing resolution on names
not flagged for access in capability mode.  This is, generally, not a huge
problem, but might be something to resolve in the future.  Flag these cases
with XXX comments.

Submitted by:	jonathan
Sponsored by:	Google, Inc.
2011-07-17 23:05:24 +00:00
Attilio Rao
cfdfd32d34 MFC 2011-06-26 17:30:46 +00:00
Andriy Gapon
1aac6ac94a generic_stop_cpus: pull timeout logic from under DIAGNOSTIC
... and also increase the timeout.
It's better to try to proceed somehow despite stuck CPUs than to hang
indefinitely.  Especially so during shutdown and when entering kdb or panic.

Timeout value is still an aribitrary value.
Timeout diagnostic is just a printf; the work on something more
debuggable is planned by attilio.  Need to be careful here as
stop_cpus_hard is called very early while enetering kdb and soon(-ish)
it may become called very early when entering panic.

Reviewed by:	attilio
MFC after:	2 months
2011-06-25 10:01:43 +00:00
Attilio Rao
a38f1f263b Remove pc_cpumask and pc_other_cpus usage from MI code.
Tested by:	pluknet
2011-06-13 13:28:31 +00:00
Attilio Rao
7fcdc9a26f MFC 2011-05-26 17:38:00 +00:00
John Baldwin
5b41f90fd1 Silly spelling typos.
Submitted by:	"b. f."
2011-05-24 19:55:57 +00:00