Commit Graph

14 Commits

Author SHA1 Message Date
Juli Mallett
379663d70b o) Use ABI, not ISA_* options, to determine whether to compile bits if libkern
required for the ABI the kernel is being built for.
   XXX This is implemented in a kind-of nasty way that involves including source
       files, but it's still an improvement.
o) Retire ISA_* options since they're unused and were always wrong.
2012-03-12 21:25:32 +00:00
Oleksandr Tymoshenko
ac35ff65d3 Use new option names for NFS client and NFS server
See UPDATING entry for 20110427
2011-05-11 00:52:41 +00:00
Alexander Motin
97b53e3634 Switch the GENERIC kernels for all architectures to the new CAM-based ATA
stack. It means that all legacy ATA drivers are disabled and replaced by
respective CAM drivers. If you are using ATA device names in /etc/fstab or
other places, make sure to update them respectively (adX -> adaY,
acdX -> cdY, afdX -> daY, astX -> saY, where 'Y's are the sequential
numbers for each type in order of detection, unless configured otherwise
with tunables, see cam(4)).

ataraid(4) functionality is now supported by the RAID GEOM class.
To use it you can load geom_raid kernel module and use graid(8) tool
for management. Instead of /dev/arX device names, use /dev/raid/rX.
2011-04-24 08:58:58 +00:00
Warner Losh
161b83b959 Remove the 'machine mips' from DEFAULTS. Put the proper 'machine mips
mipsel' or 'machine mips mipseb' into the config file (with a few 64's
tossed in for good measure).  This will let us build the proper
kernels with different worlds as part of make universe.
2010-11-13 22:34:12 +00:00
Neel Natu
40e359dc3a Get rid of unused options: KERNPHYSADDR, KERNVIRTADDR, PHYSADDR, PHYS_ADDR_64BIT
Discussed with: gonzo, imp
2010-02-20 06:39:14 +00:00
Attilio Rao
c1210a7d97 Adjust style (following the already existing rules) for the newly
introduced option DEADLKRES.

Reported by:	danfe, julian, avg
2010-02-15 23:44:48 +00:00
Attilio Rao
88cbfa852e Add the options DEADLKRES (introducing the deadlock resolver thread) in
the 'debugging' section of any HEAD kernel and enable for the mainstream
ones, excluding the embedded architectures.
It may, of course, enabled on a case-by-case basis.

Sponsored by:	Sandvine Incorporated
Requested by:	emaste
Discussed with:	kib
2010-02-10 16:30:04 +00:00
Warner Losh
f493c5e372 Merge from projects/mips to head by hand:
I think these are the relevant changes, but definitely are a superset
of them.  Software archaeologists are invited to check the branch
itself for the details.

r199695 | imp | 2009-11-23 00:49:50 -0700 (Mon, 23 Nov 2009) | 2 lines
Specify loader script and load address

r198263 | neel | 2009-10-19 22:31:20 -0600 (Mon, 19 Oct 2009) | 7 lines
The default KERNLOADADDR does not work on MALTA hardware. On my platform the
"First free SDRAM address" reported by YAMON is 0x800b6e61.
So use a conservative KERNLOADADDR of 0x80100000.
Approved by: imp (mentor)

r194163 | imp | 2009-06-14 00:12:21 -0600 (Sun, 14 Jun 2009) | 2 lines
Kludge: pretend to be ISA_MIPS32 for the moment.

r192864 | gonzo | 2009-05-26 16:40:12 -0600 (Tue, 26 May 2009) | 4 lines
- Replace CPU_NOFPU and SOFTFLOAT options with CPU_FPU. By default
   we assume that there is no FPU, because majority of SoC does
   not have it.

r187461 | gonzo | 2009-01-19 21:24:03 -0700 (Mon, 19 Jan 2009) | 3 lines
- KERNLOADADDR should be defined with makeoption.
    Redboot loads kernel now

r187418 | gonzo | 2009-01-18 19:37:10 -0700 (Sun, 18 Jan 2009) | 4 lines
- Add trampoline stuff for bootloaders that do not support ELF
- Replace arm'ish KERNPHYSADDR/KERNVIRTADDR with
    KERNLOADADDR/TRAMPLOADADDR and clean configs
2010-01-10 20:03:16 +00:00
Jun Kuriyama
b3b17597ea - Use "device\t" and "options \t" for consistency. 2009-05-10 00:00:25 +00:00
Marcel Moolenaar
fd872be586 Add mips/conf/DEFAULTS and populate it with:
machine arm
        device  mem
	device  uart_ns8250
        options GEOM_BSD
        options GEOM_MBR

Remove the first three from all kernel configuration files
(sometimes commented-out) and change geom_bsd and geom_mbr
from standard to optional.
2008-10-23 02:16:38 +00:00
David E. O'Brien
86102aae67 Catch up with the move from mips32/. 2008-09-03 18:40:29 +00:00
Poul-Henning Kamp
0051271e12 Make genclock standard on all platforms.
Thanks to: grehan & marcel for platform support on ia64 and ppc.
2008-04-21 10:09:55 +00:00
Warner Losh
d40afdf065 fix comments for these files.
Noticed by: stass
2008-04-13 22:04:56 +00:00
Warner Losh
2db4962425 FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64,
mips32r2 and mips64r2 (and close relatives) processors.  There
presently is support for ADMtek ADM5120, A mips 4Kc in a malta board,
the RB533 routerboard (based on IDT RC32434) and some preliminary
support for sibtye/broadcom designs.  Other hardware support will be
forthcomcing.

This port boots multiuser under gxemul emulating the malta board and
also bootstraps on the hardware whose support is forthcoming...

Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard,
Randall Stewert and others that have contributed to the mips2 and/or
mips2-jnpr perforce branches.  Juniper contirbuted a generic mips port
late in the life cycle of the misp2 branch.  Warner Losh merged the
mips2 and Juniper code bases, and others list above have worked for
the past several months to get to multiuser.

In addition, the mips2 work owe a debt to the trail blazing efforts of
the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:07:57 +00:00