- add show as alias for get
- add weights to allow mpath to do more than equal cost
- add sticky / nostick to disable / re-enable per-connection load balancing
This adds a field to rt_metrics_lite so network bits of world will need to be re-built.
Reviewed by: jeli & qingli
dependency tracking and ordering enforcement.
With this change, per-vnet initialization functions introduced with
r190787 are no longer directly called from traditional initialization
functions (which cc in most cases inlined to pre-r190787 code), but are
instead registered via the vnet framework first, and are invoked only
after all prerequisite modules have been initialized. In the long run,
this framework should allow us to both initialize and dismantle
multiple vnet instances in a correct order.
The problem this change aims to solve is how to replay the
initialization sequence of various network stack components, which
have been traditionally triggered via different mechanisms (SYSINIT,
protosw). Note that this initialization sequence was and still can be
subtly different depending on whether certain pieces of code have been
statically compiled into the kernel, loaded as modules by boot
loader, or kldloaded at run time.
The approach is simple - we record the initialization sequence
established by the traditional mechanisms whenever vnet_mod_register()
is called for a particular vnet module. The vnet_mod_register_multi()
variant allows a single initializer function to be registered multiple
times but with different arguments - currently this is only used in
kern/uipc_domain.c by net_add_domain() with different struct domain *
as arguments, which allows for protosw-registered initialization
routines to be invoked in a correct order by the new vnet
initialization framework.
For the purpose of identifying vnet modules, each vnet module has to
have a unique ID, which is statically assigned in sys/vimage.h.
Dynamic assignment of vnet module IDs is not supported yet.
A vnet module may specify a single prerequisite module at registration
time by filling in the vmi_dependson field of its vnet_modinfo struct
with the ID of the module it depends on. Unless specified otherwise,
all vnet modules depend on VNET_MOD_NET (container for ifnet list head,
rt_tables etc.), which thus has to and will always be initialized
first. The framework will panic if it detects any unresolved
dependencies before completing system initialization. Detection of
unresolved dependencies for vnet modules registered after boot
(kldloaded modules) is not provided.
Note that the fact that each module can specify only a single
prerequisite may become problematic in the long run. In particular,
INET6 depends on INET being already instantiated, due to TCP / UDP
structures residing in INET container. IPSEC also depends on INET,
which will in turn additionally complicate making INET6-only kernel
configs a reality.
The entire registration framework can be compiled out by turning on the
VIMAGE_GLOBALS kernel config option.
Reviewed by: bz
Approved by: julian (mentor)
from existing functions for initializing global state.
At this stage, the new per-vnet initializer functions are
directly called from the existing global initialization code,
which should in most cases result in compiler inlining those
new functions, hence yielding a near-zero functional change.
Modify the existing initializer functions which are invoked via
protosw, like ip_init() et. al., to allow them to be invoked
multiple times, i.e. per each vnet. Global state, if any,
is initialized only if such functions are called within the
context of vnet0, which will be determined via the
IS_DEFAULT_VNET(curvnet) check (currently always true).
While here, V_irtualize a few remaining global UMA zones
used by net/netinet/netipsec networking code. While it is
not yet clear to me or anybody else whether this is the right
thing to do, at this stage this makes the code more readable,
and makes it easier to track uncollected UMA-zone-backed
objects on vnet removal. In the long run, it's quite possible
that some form of shared use of UMA zone pools among multiple
vnets should be considered.
Bump __FreeBSD_version due to changes in layout of structs
vnet_ipfw, vnet_inet and vnet_net.
Approved by: julian (mentor)
1. separating L2 tables (ARP, NDP) from the L3 routing tables
2. removing as much locking dependencies among these layers as
possible to allow for some parallelism in the search operations
3. simplify the logic in the routing code,
The most notable end result is the obsolescent of the route
cloning (RTF_CLONING) concept, which translated into code reduction
in both IPv4 ARP and IPv6 NDP related modules, and size reduction in
struct rtentry{}. The change in design obsoletes the semantics of
RTF_CLONING, RTF_WASCLONE and RTF_LLINFO routing flags. The userland
applications such as "arp" and "ndp" have been modified to reflect
those changes. The output from "netstat -r" shows only the routing
entries.
Quite a few developers have contributed to this project in the
past: Glebius Smirnoff, Luigi Rizzo, Alessandro Cerri, and
Andre Oppermann. And most recently:
- Kip Macy revised the locking code completely, thus completing
the last piece of the puzzle, Kip has also been conducting
active functional testing
- Sam Leffler has helped me improving/refactoring the code, and
provided valuable reviews
- Julian Elischer setup the perforce tree for me and has helped
me maintaining that branch before the svn conversion
directly include only the header files needed. This reduces the
unneeded spamming of various headers into lots of files.
For now, this leaves us with very few modules including vnet.h
and thus needing to depend on opt_route.h.
Reviewed by: brooks, gnn, des, zec, imp
Sponsored by: The FreeBSD Foundation
whitespace) macros from p4/vimage branch.
Do a better job at enclosing all instantiations of globals
scheduled for virtualization in #ifdef VIMAGE_GLOBALS blocks.
De-virtualize and mark as const saorder_state_alive and
saorder_state_any arrays from ipsec code, given that they are never
updated at runtime, so virtualizing them would be pointless.
Reviewed by: bz, julian
Approved by: julian (mentor)
Obtained from: //depot/projects/vimage-commit2/...
X-MFC after: never
Sponsored by: NLnet Foundation, The FreeBSD Foundation
for virtualization.
Instead of initializing the affected global variables at instatiation,
assign initial values to them in initializer functions. As a rule,
initialization at instatiation for such variables should never be
introduced again from now on. Furthermore, enclose all instantiations
of such global variables in #ifdef VIMAGE_GLOBALS blocks.
Essentialy, this change should have zero functional impact. In the next
phase of merging network stack virtualization infrastructure from
p4/vimage branch, the new initialization methology will allow us to
switch between using global variables and their counterparts residing in
virtualization containers with minimum code churn, and in the long run
allow us to intialize multiple instances of such container structures.
Discussed at: devsummit Strassburg
Reviewed by: bz, julian
Approved by: julian (mentor)
Obtained from: //depot/projects/vimage-commit2/...
X-MFC after: never
Sponsored by: NLnet Foundation, The FreeBSD Foundation
from the vimage project, as per plan established at devsummit 08/08:
http://wiki.freebsd.org/Image/Notes200808DevSummit
Introduce INIT_VNET_*() initializer macros, VNET_FOREACH() iterator
macros, and CURVNET_SET() context setting macros, all currently
resolving to NOPs.
Prepare for virtualization of selected SYSCTL objects by introducing a
family of SYSCTL_V_*() macros, currently resolving to their global
counterparts, i.e. SYSCTL_V_INT() == SYSCTL_INT().
Move selected #defines from sys/sys/vimage.h to newly introduced header
files specific to virtualized subsystems (sys/net/vnet.h,
sys/netinet/vinet.h etc.).
All the changes are verified to have zero functional impact at this
point in time by doing MD5 comparision between pre- and post-change
object files(*).
(*) netipsec/keysock.c did not validate depending on compile time options.
Implemented by: julian, bz, brooks, zec
Reviewed by: julian, bz, brooks, kris, rwatson, ...
Approved by: julian (mentor)
Obtained from: //depot/projects/vimage-commit2/...
X-MFC after: never
Sponsored by: NLnet Foundation, The FreeBSD Foundation
someone else might change it, so after we re-acquire the lock on it,
we need to check it is still valid. People have been panicing in this
function due to soem edge cases which I have hopefully removed.
Reviewed by: keramida @
Obtained from: 1 week
rt_check() in its original form proved to be sufficient and
rt_check_fib() can go away (as can its evil twin in_rt_check()).
I believe this does NOT address the crashes people have been seeing
in rt_check.
MFC after: 1 week
virtualization work done by Marko Zec (zec@).
This is the first in a series of commits over the course
of the next few weeks.
Mark all uses of global variables to be virtualized
with a V_ prefix.
Use macros to map them back to their global names for
now, so this is a NOP change only.
We hope to have caught at least 85-90% of what is needed
so we do not invalidate a lot of outstanding patches again.
Obtained from: //depot/projects/vimage-commit2/...
Reviewed by: brooks, des, ed, mav, julian,
jamie, kris, rwatson, zec, ...
(various people I forgot, different versions)
md5 (with a bit of help)
Sponsored by: NLnet Foundation, The FreeBSD Foundation
X-MFC after: never
V_Commit_Message_Reviewed_By: more people than the patch
(Other more specific related options will follow)
This allows one to set multiple p2p links to the same place
and select which to use by having each in different FIBS.
This particular implementation is designed to be fully backwards compatible
and to be MFC-able to 7.x (and 6.x)
Currently the only protocol that can make use of the multiple tables is IPv4
Similar functionality exists in OpenBSD and Linux.
From my notes:
-----
One thing where FreeBSD has been falling behind, and which by chance I
have some time to work on is "policy based routing", which allows
different
packet streams to be routed by more than just the destination address.
Constraints:
------------
I want to make some form of this available in the 6.x tree
(and by extension 7.x) , but FreeBSD in general needs it so I might as
well do it in -current and back port the portions I need.
One of the ways that this can be done is to have the ability to
instantiate multiple kernel routing tables (which I will now
refer to as "Forwarding Information Bases" or "FIBs" for political
correctness reasons). Which FIB a particular packet uses to make
the next hop decision can be decided by a number of mechanisms.
The policies these mechanisms implement are the "Policies" referred
to in "Policy based routing".
One of the constraints I have if I try to back port this work to
6.x is that it must be implemented as a EXTENSION to the existing
ABIs in 6.x so that third party applications do not need to be
recompiled in timespan of the branch.
This first version will not have some of the bells and whistles that
will come with later versions. It will, for example, be limited to 16
tables in the first commit.
Implementation method, Compatible version. (part 1)
-------------------------------
For this reason I have implemented a "sufficient subset" of a
multiple routing table solution in Perforce, and back-ported it
to 6.x. (also in Perforce though not always caught up with what I
have done in -current/P4). The subset allows a number of FIBs
to be defined at compile time (8 is sufficient for my purposes in 6.x)
and implements the changes needed to allow IPV4 to use them. I have not
done the changes for ipv6 simply because I do not need it, and I do not
have enough knowledge of ipv6 (e.g. neighbor discovery) needed to do it.
Other protocol families are left untouched and should there be
users with proprietary protocol families, they should continue to work
and be oblivious to the existence of the extra FIBs.
To understand how this is done, one must know that the current FIB
code starts everything off with a single dimensional array of
pointers to FIB head structures (One per protocol family), each of
which in turn points to the trie of routes available to that family.
The basic change in the ABI compatible version of the change is to
extent that array to be a 2 dimensional array, so that
instead of protocol family X looking at rt_tables[X] for the
table it needs, it looks at rt_tables[Y][X] when for all
protocol families except ipv4 Y is always 0.
Code that is unaware of the change always just sees the first row
of the table, which of course looks just like the one dimensional
array that existed before.
The entry points rtrequest(), rtalloc(), rtalloc1(), rtalloc_ign()
are all maintained, but refer only to the first row of the array,
so that existing callers in proprietary protocols can continue to
do the "right thing".
Some new entry points are added, for the exclusive use of ipv4 code
called in_rtrequest(), in_rtalloc(), in_rtalloc1() and in_rtalloc_ign(),
which have an extra argument which refers the code to the correct row.
In addition, there are some new entry points (currently called
rtalloc_fib() and friends) that check the Address family being
looked up and call either rtalloc() (and friends) if the protocol
is not IPv4 forcing the action to row 0 or to the appropriate row
if it IS IPv4 (and that info is available). These are for calling
from code that is not specific to any particular protocol. The way
these are implemented would change in the non ABI preserving code
to be added later.
One feature of the first version of the code is that for ipv4,
the interface routes show up automatically on all the FIBs, so
that no matter what FIB you select you always have the basic
direct attached hosts available to you. (rtinit() does this
automatically).
You CAN delete an interface route from one FIB should you want
to but by default it's there. ARP information is also available
in each FIB. It's assumed that the same machine would have the
same MAC address, regardless of which FIB you are using to get
to it.
This brings us as to how the correct FIB is selected for an outgoing
IPV4 packet.
Firstly, all packets have a FIB associated with them. if nothing
has been done to change it, it will be FIB 0. The FIB is changed
in the following ways.
Packets fall into one of a number of classes.
1/ locally generated packets, coming from a socket/PCB.
Such packets select a FIB from a number associated with the
socket/PCB. This in turn is inherited from the process,
but can be changed by a socket option. The process in turn
inherits it on fork. I have written a utility call setfib
that acts a bit like nice..
setfib -3 ping target.example.com # will use fib 3 for ping.
It is an obvious extension to make it a property of a jail
but I have not done so. It can be achieved by combining the setfib and
jail commands.
2/ packets received on an interface for forwarding.
By default these packets would use table 0,
(or possibly a number settable in a sysctl(not yet)).
but prior to routing the firewall can inspect them (see below).
(possibly in the future you may be able to associate a FIB
with packets received on an interface.. An ifconfig arg, but not yet.)
3/ packets inspected by a packet classifier, which can arbitrarily
associate a fib with it on a packet by packet basis.
A fib assigned to a packet by a packet classifier
(such as ipfw) would over-ride a fib associated by
a more default source. (such as cases 1 or 2).
4/ a tcp listen socket associated with a fib will generate
accept sockets that are associated with that same fib.
5/ Packets generated in response to some other packet (e.g. reset
or icmp packets). These should use the FIB associated with the
packet being reponded to.
6/ Packets generated during encapsulation.
gif, tun and other tunnel interfaces will encapsulate using the FIB
that was in effect withthe proces that set up the tunnel.
thus setfib 1 ifconfig gif0 [tunnel instructions]
will set the fib for the tunnel to use to be fib 1.
Routing messages would be associated with their
process, and thus select one FIB or another.
messages from the kernel would be associated with the fib they
refer to and would only be received by a routing socket associated
with that fib. (not yet implemented)
In addition Netstat has been edited to be able to cope with the
fact that the array is now 2 dimensional. (It looks in system
memory using libkvm (!)). Old versions of netstat see only the first FIB.
In addition two sysctls are added to give:
a) the number of FIBs compiled in (active)
b) the default FIB of the calling process.
Early testing experience:
-------------------------
Basically our (IronPort's) appliance does this functionality already
using ipfw fwd but that method has some drawbacks.
For example,
It can't fully simulate a routing table because it can't influence the
socket's choice of local address when a connect() is done.
Testing during the generating of these changes has been
remarkably smooth so far. Multiple tables have co-existed
with no notable side effects, and packets have been routes
accordingly.
ipfw has grown 2 new keywords:
setfib N ip from anay to any
count ip from any to any fib N
In pf there seems to be a requirement to be able to give symbolic names to the
fibs but I do not have that capacity. I am not sure if it is required.
SCTP has interestingly enough built in support for this, called VRFs
in Cisco parlance. it will be interesting to see how that handles it
when it suddenly actually does something.
Where to next:
--------------------
After committing the ABI compatible version and MFCing it, I'd
like to proceed in a forward direction in -current. this will
result in some roto-tilling in the routing code.
Firstly: the current code's idea of having a separate tree per
protocol family, all of the same format, and pointed to by the
1 dimensional array is a bit silly. Especially when one considers that
there is code that makes assumptions about every protocol having the
same internal structures there. Some protocols don't WANT that
sort of structure. (for example the whole idea of a netmask is foreign
to appletalk). This needs to be made opaque to the external code.
My suggested first change is to add routing method pointers to the
'domain' structure, along with information pointing the data.
instead of having an array of pointers to uniform structures,
there would be an array pointing to the 'domain' structures
for each protocol address domain (protocol family),
and the methods this reached would be called. The methods would have
an argument that gives FIB number, but the protocol would be free
to ignore it.
When the ABI can be changed it raises the possibilty of the
addition of a fib entry into the "struct route". Currently,
the structure contains the sockaddr of the desination, and the resulting
fib entry. To make this work fully, one could add a fib number
so that given an address and a fib, one can find the third element, the
fib entry.
Interaction with the ARP layer/ LL layer would need to be
revisited as well. Qing Li has been working on this already.
This work was sponsored by Ironport Systems/Cisco
Reviewed by: several including rwatson, bz and mlair (parts each)
Obtained from: Ironport systems/Cisco
(ECMP) for both IPv4 and IPv6. Previously, multipath route insertion
is disallowed. For example,
route add -net 192.103.54.0/24 10.9.44.1
route add -net 192.103.54.0/24 10.9.44.2
The second route insertion will trigger an error message of
"add net 192.103.54.0/24: gateway 10.2.5.2: route already in table"
Multiple default routes can also be inserted. Here is the netstat
output:
default 10.2.5.1 UGS 0 3074 bge0 =>
default 10.2.5.2 UGS 0 0 bge0
When multipath routes exist, the "route delete" command requires
a specific gateway to be specified or else an error message would
be displayed. For example,
route delete default
would fail and trigger the following error message:
"route: writing to routing socket: No such process"
"delete net default: not in table"
On the other hand,
route delete default 10.2.5.2
would be successful: "delete net default: gateway 10.2.5.2"
One does not have to specify a gateway if there is only a single
route for a particular destination.
I need to perform more testings on address aliases and multiple
interfaces that have the same IP prefixes. This patch as it
stands today is not yet ready for prime time. Therefore, the ECMP
code fragments are fully guarded by the RADIX_MPATH macro.
Include the "options RADIX_MPATH" in the kernel configuration
to enable this feature.
Reviewed by: robert, sam, gnn, julian, kmacy
functions. It is easily triggered by running routed, and, I expect, by
running any other daemon that uses routing sockets.
Reviewed by: net@
MFC after: 1 week
Specifically, if two threads were doing concurrent lookups and the existing
gateway was marked down, the the first thread would drop a reference on the
gateway route and then unlock the "root" route while it tried to allocate
a new route. The second thread could then also drop a reference on the
same gateway route resulting in a reference underflow. Fix this by
clearing the gateway route pointer after dropping the reference count but
before dropping the lock. Secondly, in this same case, the second thread
would overwrite the gateway route pointer w/o free'ing a reference to the
route installed by the first thread. In practice this would probably just
fix a lost reference that would result in a route never being freed.
This fixes panics observed in rt_check() and rtexpunge().
MFC after: 1 week
PR: kern/112490
Insight from: mehuljv at yahoo.com
Reviewed by: ru (found the "not-setting it to NULL" part)
Tested by: several
- In rt_check() remove the senderr() macro and the "bad" label. They
used to simplify code, but now aren't.
- Remove extra RT_LOCK_ASSERT() in rt_setgate(). The RT_REMREF macro
does this.
- In rtfree() convert panics to KASSERTs.
- Strict the routing API: rtfree() should be called only in a case
when we are completely sure we've got the last reference on the
rtentry. In all other cases RTFREE_LOCKED() macro should be used.
If the reference isn't the last one spit out a warning printf.
Correct the only(?) case for this in rt_check().
- Fix typos in comments.
at the start of rtalloc1(). This backs out part of revs 1.83 and 1.85.
Profiling on an i386 showed that that for sending tiny packets using
bge, -current takes 7 bzero()s where RELENG_4 takes only 1, and that
bzero()ing is now the dominant overhead (10-12%, up from 1%, but
profiling overestimated this a bit). This commit backs out 2 of the
6 extra bzero()s (1 in each of 2 calls per packet to rtalloc1()). They
were the largest ones by byte count (48 bytes each) but perhaps not
by time (small misaligned ones might take longer).
255.255.255.0, and a default route with gateway x.x.x.1. Now if
the address mask is changed to something more specific, e.g.,
255.255.255.128, then after the mask change the default gateway
is no longer reachable.
Since the default route is still present in the routing table,
when the output code tries to resolve the address of the default
gateway in function rt_check(), again, the default route will be
returned by rtalloc1(). Because the lock is currently held on the
rtentry structure, one more attempt to hold the lock will trigger
a crash due to "lock recursed on non-recursive mutex ..."
This is a general problem. The fix checks for the above condition
so that an existing route entry is not mistaken for a new cloned
route. Approriately, an ENETUNREACH error is returned back to the
caller
Approved by: andre
gateways which are unreachable except through the default router. For
example, assuming there is a default route configured, and inserting
a route
"route add 64.102.54.0/24 60.80.1.1"
is currently allowed even when 60.80.1.1 is only reachable through
the default route. However, an error is thrown when this route is
utilized, say,
"ping 64.102.54.1" will return an error
This type of route insertion should be disallowed becasue:
1) Let's say that somehow our code allowed this packet to flow to
the default router, and the default router knows the next hop is
60.80.1.1, then the question is why bother inserting this route in
the 1st place, just simply use the default route.
2) Since we're not talking about source routing here, the default
router could very well choose a different path than using 60.80.1.1
for the next hop, again it defeats the purpose of adding this route.
Reviewed by: ru, gnn, bz
Approved by: andre
destination. These checks are needed so we do not install
a route looking like this:
(0) 192.0.2.200 UH tun0 =>
When removing this route the kernel will start to walk
the address space which looks like a hang on 64bit platforms
because it'll take ages while on 32bit you should see a panic
when kernel debugging options are turned on.
The problem is in rtrequest1:
if (netmask) {
rt_maskedcopy(dst, ndst, netmask);
} else
bcopy(dst, ndst, dst->sa_len);
In both cases the len might be 0 if the application forgot to
set it. If so ndst will be all-zero leading to above
mentioned strange routes.
This is an application error but we must not fail/hang/panic
because of this.
Looks ok: gnn
No objections: net@ (silence)
MFC after: 8 weeks
rather than in ifindex_table[]; all (except one) accesses are
through ifp anyway. IF_LLADDR() works faster, and all (except
one) ifaddr_byindex() users were converted to use ifp->if_addr.
- Stop storing a (pointer to) Ethernet address in "struct arpcom",
and drop the IFP2ENADDR() macro; all users have been converted
to use IF_LLADDR() instead.
- Rearrange code so that in a case of failure the affected
route is not changed. Otherwise, a bogus rtentry will be
left and later rt_check() can recurse on its lock. [1]
- Remove comment about protocol cloning.
- Fix two places where rtentry mutex was recursed on, because
accessed via two different pointers, that were actually pointing
to the same rtentry in some cases. [1]
- Return EADDRINUSE instead of bogus EDQUOT, in case when gateway
uses the same route. [2]
Reported & tested by: ps, Andrej Zverev <az inec.ru> [1]
PR: kern/64090 [2]
- rt0 passed to rt_check() must not be NULL, assert this.
- rt returned by rt_check() must be valid locked rtentry,
if no error occured.
o Modify callers, so that they never pass NULL rt0
to rt_check().
Reviewed by: sam, ume (nd6.c)
route itself.
It fixes a bug where an IPv4 route for example has an IPv6 gateway
specified:
route add 10.1.1.1 -inet6 fe80::1%fxp0
Destination Gateway Flags Refs Use Netif Expire
10.1.1.1 fe80::1%fxp0 UGHS 0 0 fxp0
The fix rejects these illegal combinations:
route: writing to routing socket: Invalid argument
add host 10.1.1.1: gateway fe80::1%fxp0: Invalid argument
Reviewed by: KAME jinmei@isl.rdc.toshiba.co.jp
Reviewed by: andre (mentor)
Approved by: re
MFC after: 5
security.jail.allow_raw_sockets sysctl MIB is set to 1) where privileged
access to jails is given out, it is possible for prison root to manipulate
various network parameters which effect the host environment. This commit
plugs a number of security holes associated with the use of raw sockets
and prisons.
This commit makes the following changes:
- Add a comment to rtioctl warning developers that if they add
any ioctl commands, they should use super-user checks where necessary,
as it is possible for PRISON root to make it this far in execution.
- Add super-user checks for the execution of the SIOCGETVIFCNT
and SIOCGETSGCNT IP multicast ioctl commands.
- Add a super-user check to rip_ctloutput(). If the calling cred
is PRISON root, make sure the socket option name is IP_HDRINCL,
otherwise deny the request.
Although this patch corrects a number of security problems associated
with raw sockets and prisons, the warning in jail(8) should still
apply, and by default we should keep the default value of
security.jail.allow_raw_sockets MIB to 0 (or disabled) until
we are certain that we have tracked down all the problems.
Looking forward, we will probably want to eliminate the
references to curthread.
This may be a MFC candidate for RELENG_5.
Reviewed by: rwatson
Approved by: bmilekic (mentor)
called "rtentry".
This saves a considerable amount of kernel memory. R_Zmalloc previously
used 256 byte blocks (plus kmalloc overhead) whereas UMA only needs 132
bytes.
Idea from: OpenBSD
