call, its semantics were unintentionally changed. It went from
returning the time state to returning 0 or -1. Since 0 means time
normal, and non-zero effectively only shows up around leap seconds,
this went unnoticed until now. At least unnoticed until someone was
trying to run a binary they didn't have source for and it was
misbehaving...
Submitted by: Judah Levine
MFC After: 2 weeks
preemptions when adjusting the priority of a thread that is on a run
queue. This was only observed when FULL_PREEMPTION was enabled.
Reported by: kris
Diagnosed by: ups
MFC after: 1 week
the UCB license now excludes the advertising clause. I'm not
interested in it either, so move my copyright. This leaves
only a CGD copyright with the advertising clause.
MFC after: 3 days
- Sort by date in license blocks, oldest copyright first.
- All rights reserved after all copyrights, not just the first.
- Use (c) to be consistent with other entries.
MFC after: 3 days
of max() when computing the divisor in SCHED_TICK_PRI(). This prevents
cases where rounding down would allow the quotient to exceed
SCHED_PRI_RANGE.
- Garbage collect some unused flags and fields.
- Replace TDF_HOLD with sched_pin_td()/sched_unpin_td() since it simply
duplicated this functionality.
- Re-enable the rebalancer by default and fix the sysctl so it can be
modified.
marked idle, thus breaking cpu load balancing.
- Change sched_interact_update() to fix cases where the stored history
has expanded significantly rather than handling them in the callers. This
fixes a case where sched_priority() could compute a bad value.
- Add a sysctl to disable the global load balancer for experimentation.
sysctl and socket teardown by adding a reference count to the UNIX domain
pcb object and fixing the sysctl that enumerates unpcbs to grab a
reference on each unpcb while it builds the list to copy out to userland.
- Close a race between UNIX domain pcb garbage collection (unp_gc()) and
file descriptor teardown (fdrop()) by adding a new garbage collection
flag FWAIT. unp_gc() sets FWAIT while it walks the message buffers
in a UNIX domain socket looking for nested file descriptor references
and clears the flag when it is finished. fdrop() checks to see if the
flag is set on a file descriptor whose refcount just dropped to 0 and
waits for unp_gc() to clear the flag before completely destroying the
file descriptor.
MFC after: 1 week
Reviewed by: rwatson
Submitted by: ups
Hopefully makes the panics go away: mx1
setting ftick = ltick = ticks in schedinit().
- Update the priority when we are pulled off of the run queue and when we
are inserted onto the run queue so that it more accurately reflects our
present status. This is important for efficient priority propagation
functioning.
- Move the frequency test into sched_pctcpu_update() so we don't repeat it
each time we'd like to call it.
- Put some temporary work-around code in sched_priority() in case the tick
mechanism produces a bad priority. Eventually this should revert to an
assert again.
the most recently chosen index. This significantly improves nice
behavior. This allows a lower priority thread to run some multiple of
times before the higher priority thread makes it to the front of
the queue. A nice +20 cpu hog now only gets ~5% of the cpu when running
with a nice 0 cpu hog and about 1.5% with a nice -20 hog. A nice
difference of 1 makes a 4% difference in cpu usage between two hogs.
- Track a seperate insert and removal index. When the removal index is
empty it is updated to point at the current insert index.
- Don't remove and re-add a thread to the runq when it is being adjusted
down in priority.
- Pull some conditional code out of sched_tick(). It's looking a bit
large now.
- Remove the double queue mechanism for timeshare threads. It was slow
due to excess cache lines in play, caused suboptimal scheduling behavior
with niced and other non-interactive processes, complicated priority
lending, etc.
- Use a circular queue with a floating starting index for timeshare threads.
Enforces fairness by moving the insertion point closer to threads with
worse priorities over time.
- Give interactive timeshare threads real-time user-space priorities and
place them on the realtime/ithd queue.
- Select non-interactive timeshare thread priorities based on their cpu
utilization over the last 10 seconds combined with the nice value. This
gives us more sane priorities and behavior in a loaded system as
compared to the old method of using the interactivity score. The
interactive score quickly hit a ceiling if threads were non-interactive
and penalized new hog threads.
- Use one slice size for all threads. The slice is not currently
dynamically set to adjust scheduling behavior of different threads.
- Add some new sysctls for scheduling parameters.
Bug fixes/Clean up:
- Fix zeroing of td_sched after initialization in sched_fork_thread() caused
by recent ksegrp removal.
- Fix KSE interactivity issues related to frequent forking and exiting of
kse threads. We simply disable the penalty for thread creation and exit
for kse threads.
- Cleanup the cpu estimator by using tickincr here as well. Keep ticks and
ltick/ftick in the same frequency. Previously ticks were stathz and
others were hz.
- Lots of new and updated comments.
- Many many others.
Tested on: up x86/amd64, 8way amd64.
- runq_add_pri allows the caller to position the thread at any rqindex
regardless of priority.
- runq_choose_from() chooses the lowest priority thread starting from a given
index. The index is updated with the rqindex of the chosen thread. This
routine is used to pick the lowest priority relative to a given index.
- runq_remove_idx() updates the index if the run queue that held the removed
thread is now empty.
mac_framework.c Contains basic MAC Framework functions, policy
registration, sysinits, etc.
mac_syscalls.c Contains implementations of various MAC system calls,
including ENOSYS stubs when compiling without options
MAC.
Obtained from: TrustedBSD Project
consumes and implements, as well as the location of the framework and
policy modules.
Refactor MAC Framework versioning a bit so that the current ABI version can
be exported via a read-only sysctl.
Further update comments relating to locking/synchronization.
Update copyright to take into account these and other recent changes.
Obtained from: TrustedBSD Project
mbuf is dropped, to preserve the invariant in the PR_ADDR case.
Add a regression test to detect this condition, but do not hook it
up to the build for now.
PR: kern/38495
Submitted by: James Juran
Reviewed by: sam, rwatson
Obtained from: NetBSD
MFC after: 2 weeks
non-extattr functions from vfs_extattr.c, and extattr functions from
vfs_syscalls.c.
Change copyright/license on vfs_extattr.c to my copyright/license on
the extended attribute implementation (from extattr.h).
Clean up includes a bit.
Obtained from: TrustedBSD Project
Framework and security modules, to src/sys/security/mac/mac_policy.h,
completing the removal of kernel-only MAC Framework include files from
src/sys/sys. Update the MAC Framework and MAC policy modules. Delete
the old mac_policy.h.
Third party policy modules will need similar updating.
Obtained from: TrustedBSD Project
It always called MH_ALIGN for small lengths being
prepended (less than MHLEN). This meant that if you did
a prepend on a non M_PKTHDR the system would panic with
the KASSERT in MH_ALIGN. Instead we are not aware of
this and do a MH_ALIGN or M_ALIGN as appropriate.
Reviewed by: andre
Approved by: gnn
subsystems will be a property of policy modules, which may require
access control check entry points to be invoked even when not actively
enforcing (i.e., to track information flow without providing
protection).
Obtained from: TrustedBSD Project
Suggested by: Christopher dot Vance at sparta dot com
copyin()/copyout() for message type is separated from msgsnd()/msgrcv() and
it is done from its wrapper functions to support 32-bit emulations. After I
implemented this, I have briefly referenced NetBSD and Darwin. NetBSD passes
copyin()/copyout() function pointers from wrappers. Darwin passes size of
message type as an argument, which is actually similar to my first
implementation (P4 109706). We may revisit these implementations later.
vnode v_flag. For cluster buffers this would result in dereferencing NULL
b_vp. To prevent the panic, cache relevant vnode flag before calling
bstrategy.
Reported by: Peter Holm, kris
Tested by: Peter Holm
Reviewed by: tegge
Pointy hat to: kib
running thread's id on each cpu. This allow us to add in-kernel adaptive
spin for user level mutex. While spinning in user space is possible,
without correct thread running state exported from kernel, it hardly
can be implemented efficiently without wasting cpu cycles, however
exporting thread running state unlikely will be implemented soon as
it has to design and stablize interfaces. This implementation is
transparent to user space, it can be disabled dynamically. With this
change, mutex ping-pong program's performance is improved massively on
SMP machine. performance of mysql super-smack select benchmark is increased
about 7% on Intel dual dual-core2 Xeon machine, it indicates on systems
which have bunch of cpus and system-call overhead is low (athlon64, opteron,
and core-2 are known to be fast), the adaptive spin does help performance.
Added sysctls:
kern.threads.umtx_dflt_spins
if the sysctl value is non-zero, a zero umutex.m_spincount will
cause the sysctl value to be used a spin cycle count.
kern.threads.umtx_max_spins
the sysctl sets upper limit of spin cycle count.
Tested on: Athlon64 X2 3800+, Dual Xeon 5130
- in trying to avoid nested brackets and #ifdef INVARIANTS around i at the
top, I broke booting for INVARIANTS all together :-(
- the cleanest fix is to simply assign to sq twice if INVARIANTS is enabled
- tested both with and without INVARIANTS :-/
after we perform the operations to delete the export,
call vfs_deleteopt() to delete the "export" mount option from
the linked list of mount options associated with that mount point.
This fixes one scenario:
- put a filesystem in /etc/exports to export it
- remove the filesystem from /etc/exports to delete the export and restart
mountd
- try to do a "mount -u -o ro" or "mount -u -o rw" on that filesystem
now that it is no longer exported.
arguments to fail. The mode field for shmget() appears to have undefined
meaning in the context of an already-present IPC object, but applications
appear to assume any arbitrary passed value will be ignored. I had hoped
to revisit this more quickly, but am removing the change for now to
prevent toe-stubbing.
Reported by: JAroslav Suchanek <jarda at grisoft dot cz>
PR: kern/106078
