Commit Graph

16 Commits

Author SHA1 Message Date
Oleksandr Tymoshenko
ac35ff65d3 Use new option names for NFS client and NFS server
See UPDATING entry for 20110427
2011-05-11 00:52:41 +00:00
Adrian Chadd
dba9c85977 Break out the ath PCI logic into a separate device/module.
Introduce the AHB glue for Atheros embedded systems. Right now it's
hard-coded for the AR9130 chip whose support isn't yet in this HAL;
it'll be added in a subsequent commit.

Kernel configuration files now need both 'ath' and 'ath_pci' devices; both
modules need to be loaded for the ath device to work.
2011-03-31 08:07:13 +00:00
Nathan Whitehorn
886a0c5b95 Include std.sentry5 from the SENTRY5 kernel configuration. This was
apparently missed in r215270.
2010-12-22 19:01:48 +00:00
Warner Losh
161b83b959 Remove the 'machine mips' from DEFAULTS. Put the proper 'machine mips
mipsel' or 'machine mips mipseb' into the config file (with a few 64's
tossed in for good measure).  This will let us build the proper
kernels with different worlds as part of make universe.
2010-11-13 22:34:12 +00:00
Andrew Thompson
b850ecc180 Change USB_DEBUG to #ifdef and allow it to be turned off. Previously this had
the illusion of a tunable setting but was always turned on regardless.

MFC after:	1 week
2010-04-22 21:31:34 +00:00
Attilio Rao
c1210a7d97 Adjust style (following the already existing rules) for the newly
introduced option DEADLKRES.

Reported by:	danfe, julian, avg
2010-02-15 23:44:48 +00:00
Attilio Rao
88cbfa852e Add the options DEADLKRES (introducing the deadlock resolver thread) in
the 'debugging' section of any HEAD kernel and enable for the mainstream
ones, excluding the embedded architectures.
It may, of course, enabled on a case-by-case basis.

Sponsored by:	Sandvine Incorporated
Requested by:	emaste
Discussed with:	kib
2010-02-10 16:30:04 +00:00
Warner Losh
f493c5e372 Merge from projects/mips to head by hand:
I think these are the relevant changes, but definitely are a superset
of them.  Software archaeologists are invited to check the branch
itself for the details.

r199695 | imp | 2009-11-23 00:49:50 -0700 (Mon, 23 Nov 2009) | 2 lines
Specify loader script and load address

r198263 | neel | 2009-10-19 22:31:20 -0600 (Mon, 19 Oct 2009) | 7 lines
The default KERNLOADADDR does not work on MALTA hardware. On my platform the
"First free SDRAM address" reported by YAMON is 0x800b6e61.
So use a conservative KERNLOADADDR of 0x80100000.
Approved by: imp (mentor)

r194163 | imp | 2009-06-14 00:12:21 -0600 (Sun, 14 Jun 2009) | 2 lines
Kludge: pretend to be ISA_MIPS32 for the moment.

r192864 | gonzo | 2009-05-26 16:40:12 -0600 (Tue, 26 May 2009) | 4 lines
- Replace CPU_NOFPU and SOFTFLOAT options with CPU_FPU. By default
   we assume that there is no FPU, because majority of SoC does
   not have it.

r187461 | gonzo | 2009-01-19 21:24:03 -0700 (Mon, 19 Jan 2009) | 3 lines
- KERNLOADADDR should be defined with makeoption.
    Redboot loads kernel now

r187418 | gonzo | 2009-01-18 19:37:10 -0700 (Sun, 18 Jan 2009) | 4 lines
- Add trampoline stuff for bootloaders that do not support ELF
- Replace arm'ish KERNPHYSADDR/KERNVIRTADDR with
    KERNLOADADDR/TRAMPLOADADDR and clean configs
2010-01-10 20:03:16 +00:00
Jun Kuriyama
b3b17597ea - Use "device\t" and "options \t" for consistency. 2009-05-10 00:00:25 +00:00
Sam Leffler
3364462355 Switch to ath hal source code. Note this removes the ath_hal
module; the ath module now brings in the hal support.  Kernel
config files are almost backwards compatible; supplying

device ath_hal

gives you the same chip support that the binary hal did but you
must also include

options AH_SUPPORT_AR5416

to enable the extended format descriptors used by 11n parts.
It is now possible to control the chip support included in a
build by specifying exactly which chips are to be supported
in the config file; consult ath_hal(4) for information.
2008-12-01 16:53:01 +00:00
Marcel Moolenaar
fd872be586 Add mips/conf/DEFAULTS and populate it with:
machine arm
        device  mem
	device  uart_ns8250
        options GEOM_BSD
        options GEOM_MBR

Remove the first three from all kernel configuration files
(sometimes commented-out) and change geom_bsd and geom_mbr
from standard to optional.
2008-10-23 02:16:38 +00:00
Bruce M Simpson
feb957b8dc Point this config at the required linker script. 2008-10-13 06:25:28 +00:00
David E. O'Brien
9014c90537 Catch up with the move from mips32/. 2008-09-03 18:49:54 +00:00
Poul-Henning Kamp
0051271e12 Make genclock standard on all platforms.
Thanks to: grehan & marcel for platform support on ia64 and ppc.
2008-04-21 10:09:55 +00:00
Warner Losh
ee37bddfd4 Remove $P4$ tag. Rumor has it that p4 importer hates it. 2008-04-15 02:09:28 +00:00
Warner Losh
2db4962425 FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64,
mips32r2 and mips64r2 (and close relatives) processors.  There
presently is support for ADMtek ADM5120, A mips 4Kc in a malta board,
the RB533 routerboard (based on IDT RC32434) and some preliminary
support for sibtye/broadcom designs.  Other hardware support will be
forthcomcing.

This port boots multiuser under gxemul emulating the malta board and
also bootstraps on the hardware whose support is forthcoming...

Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard,
Randall Stewert and others that have contributed to the mips2 and/or
mips2-jnpr perforce branches.  Juniper contirbuted a generic mips port
late in the life cycle of the misp2 branch.  Warner Losh merged the
mips2 and Juniper code bases, and others list above have worked for
the past several months to get to multiuser.

In addition, the mips2 work owe a debt to the trail blazing efforts of
the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:07:57 +00:00