Commit Graph

56 Commits

Author SHA1 Message Date
Bernhard Schmidt
fcd9500f91 Fix some net80211 enum nits:
- ic_vap_create() uses an ieee80211_opmode argument
- ieee80211_rate2media() takes an ieee80211_phymode argument
- ieee80211_plcp2rate() takes an ieee80211_phytype argument
- cast to enum ieee80211_protmode and ieee80211_roamingmode to silence
  compiler warnings

Submitted by:	arundel@
2011-12-17 10:23:17 +00:00
Bernhard Schmidt
129145a426 Add module version to iwi/ipw/wpi and iwn.
The version is used to check if a module is already preset, not setting
it results in:

can't re-use a leaf (ipw)!
module_register: module pci/ipw already exists!
Module pci/ipw failed to register: 17

while trying to load the module due to an entry in loader.conf. With this
commit we get the expected:

module ipw already present!

Reported by:	Dru Lavigne, bz
Tested by:	bz
MFC after:	1 week
2011-05-31 19:08:25 +00:00
Bernhard Schmidt
227901e1a2 Enable 5.5 and 11Mbit TX rates.
Reviewed by:	sam
Approved by:	rpaulo (mentor)
MFC after:	3 days
2010-05-11 17:14:17 +00:00
Maxim Sobolev
e50d35e6c6 Add new tunable 'net.link.ifqmaxlen' to set default send interface
queue length. The default value for this parameter is 50, which is
quite low for many of today's uses and the only way to modify this
parameter right now is to edit if_var.h file. Also add read-only
sysctl with the same name, so that it's possible to retrieve the
current value.

MFC after:	1 month
2010-05-03 07:32:50 +00:00
Bernhard Schmidt
82ff07c047 Remove IPW_LOCK_DECL and fix various LORs.
Approved by:	rpaulo (mentor)
2010-04-17 18:18:46 +00:00
Bernhard Schmidt
6e4c30c9cd Use iv_appie_wpa, with this commit WPA works again.
Approved by:	rpaulo (mentor)
2010-04-17 18:17:25 +00:00
Bernhard Schmidt
557c25b48f - Make ipw usable again by moving directly into ASSOC state.
- No need to manually switch to RUN state, assoc response takes care
  of that.

Approved by:	rpaulo (mentor)
2010-04-17 18:16:14 +00:00
Bernhard Schmidt
892d2e9d9b Pass correct RSSI to ieee80211_input*().
Approved by:	rpaulo (mentor)
2010-04-17 18:14:49 +00:00
Bernhard Schmidt
d02ae91a4c Fix comment about ipw_assoc and remove some whitespaces; no functional
changes.

Approved by:	rpaulo (mentor)
2010-04-17 18:13:52 +00:00
Rui Paulo
820e6a1f38 For ic_opmode switch cases, provide a default label with a printf saying
this opmode is not supported.

Approved by:	re (kib)
2009-07-10 15:28:33 +00:00
Sam Leffler
5463c4a485 Overhaul monitor mode handling:
o replace DLT_IEEE802_11 support in net80211 with DLT_IEEE802_11_RADIO
  and remove explicit bpf support from wireless drivers; drivers now
  use ieee80211_radiotap_attach to setup shared data structures that
  hold the radiotap header for each packet tx/rx
o remove rx timestamp from the rx path; it was used only by the tdma support
  for debugging and was mostly useless due to it being 32-bits and mostly
  unavailable
o track DLT_IEEE80211_RADIO bpf attachments and maintain per-vap and
  per-com state when there are active taps
o track the number of monitor mode vaps
o use bpf tap and monitor mode vap state to decide when to collect radiotap
  state and dispatch frames; drivers no longer explicitly directly check
  bpf state or use bpf calls to tap frames
o handle radiotap state updates on channel change in net80211; drivers
  should not do this (unless they bypass net80211 which is almost always
  a mistake)
o update various drivers to be more consistent/correct in handling radiotap
o update ral to include TSF in radiotap'd frames
o add promisc mode callback to wi

Reviewed by:	cbzimmer, rpaulo, thompsa
2009-05-20 20:00:40 +00:00
Andrew Thompson
e1d2045e3f Abort any scan on a fatal firmware. ic_scan_curchan is overridden to perform
the scan in firmware and this relies on the firmware to wake up the scan task
on completion.
2009-05-10 02:44:19 +00:00
Andrew Thompson
b569d2132e Drain the tasks before the interface stop call in case a restart was queued. 2009-05-08 13:44:33 +00:00
Andrew Thompson
5efea30f03 Create a taskqueue for each wireless interface which provides a serialised
sleepable context for net80211 driver callbacks. This removes the need for USB
and firmware based drivers to roll their own code to defer the chip programming
for state changes, scan requests, channel changes and mcast/promisc updates.
When a driver callback completes the hardware state is now guaranteed to have
been updated and is in sync with net80211 layer.

This nukes around 1300 lines of code from the wireless device drivers making
them more readable and less race prone.

The net80211 layer has been updated as follows
 - all state/channel changes are serialised on the taskqueue.
 - ieee80211_new_state() always queues and can now be called from any context
 - scanning runs from a single taskq function and executes to completion. driver
   callbacks are synchronous so the channel, phy mode and rx filters are
   guaranteed to be set in hardware before probe request frames are
   transmitted.

Help and contributions from Sam Leffler.

Reviewed by:	sam
2009-05-02 15:14:18 +00:00
Andrew Thompson
0c512ce8ee Drain the driver tasks on the same taskqueue in which they were enqueued. 2009-04-17 16:07:13 +00:00
Sam Leffler
339ccfb391 Hoist 802.11 encapsulation up into net80211:
o call ieee80211_encap in ieee80211_start so frames passed down to drivers
  are already encapsulated
o remove ieee80211_encap calls in drivers
o fixup wi so it recreates the 802.3 head it requires from the 802.11
  header contents
o move fast-frame aggregation from ath to net80211 (conditional on
  IEEE80211_SUPPORT_SUPERG):
  - aggregation is now done in ieee80211_start; it is enabled when the
    packets/sec exceeds ieee80211_ffppsmin (net.wlan.ffppsmin) and frames
    are held on a staging queue according to ieee80211_ffagemax
    (net.wlan.ffagemax) to wait for a frame to combine with
  - drivers must call back to age/flush the staging queue (ath does this
    on tx done, at swba, and on rx according to the state of the tx queues
    and/or the contents of the staging queue)
  - remove fast-frame-related data structures from ath
  - add ieee80211_ff_node_init and ieee80211_ff_node_cleanup to handle
    per-node fast-frames state (we reuse 11n tx ampdu state)
o change ieee80211_encap calling convention to include an explicit vap
  so frames coming through a WDS vap are recognized w/o setting M_WDS

With these changes any device able to tx/rx 3Kbyte+ frames can use fast-frames.

Reviewed by:	thompsa, rpaulo, avatar, imp, sephe
2009-03-30 21:53:27 +00:00
Sam Leffler
29aca94080 Eliminate ic_myaddr so changing the mac address of a device works correctly:
o remove ic_myaddr from ieee80211com
o change ieee80211_ifattach to take the mac address of the physical device
  and use that to setup the lladdr.
o replace all references to ic_myaddr in drivers by IF_LLADDR
o related cleanups (e.g. kill dead code)

PR:		kern/133178
Reviewed by:	thompsa, rpaulo
2009-03-29 17:59:14 +00:00
Warner Losh
155a83e87a remove now-redunant cardbus attachment. 2009-03-09 13:23:54 +00:00
Sam Leffler
c43feede8b Minor cleanup of vap create work:
o add IEEE80211_C_STA capability to indicate sta mode is supported
  (was previously assumed) and mark drivers as capable
o add ieee80211_opcap array to map an opmode to the equivalent capability bit
o move IEEE80211_C_OPMODE definition to where capabilities are defined so it's
  clear it should be kept in sync (on future additions)
o check device capabilities in clone create before trying to create a vap;
  this makes driver checks unneeded
o make error codes return on failed clone request unique
o temporarily add console printfs on clone request failures to aid in
  debugging; these will move under DIAGNOSTIC or similar before release
2008-05-12 00:15:30 +00:00
Andrew Thompson
77197f9ce4 Only start the vaps if the init routine completed. 2008-05-10 20:25:59 +00:00
Andrew Thompson
31a8c1edd8 Unify all the wifi *_ioctl routines
- Limit grabbing the lock to SIOCSIFFLAGS.
 - Move ieee80211_start_all() to SIOCSIFFLAGS.
 - Remove SIOCSIFMEDIA as it is not useful.
 - Limit ether_ioctl to only SIOCGIFADDR. SIOCSIFADDR and SIOCSIFMTU have no
   affect as there is no input/output path in the vap parent.  The vap code
   will handle the reinit of the mac address changes.
 - Split off ndis_ioctl_80211 as it was getting too different to wired devices.

This fixes a copyout while locked and a lock recursion.

Reviewed by:		sam
2008-05-01 04:55:00 +00:00
Sam Leffler
b032f27c36 Multi-bss (aka vap) support for 802.11 devices.
Note this includes changes to all drivers and moves some device firmware
loading to use firmware(9) and a separate module (e.g. ral).  Also there
no longer are separate wlan_scan* modules; this functionality is now
bundled into the wlan module.

Supported by:	Hobnob and Marvell
Reviewed by:	many
Obtained from:	Atheros (some bits)
2008-04-20 20:35:46 +00:00
Philip Paeps
6c3c35e413 Plug two potential (root-only, local) information leaks. buf is not
initialized before use and returned integrally instead of up to size.

Submitted by:	Ilja van Sprundel <ilja -at- netric.org>
Reviewed by:	secteam
MFC after:	1 day
2007-12-05 19:32:07 +00:00
Wojciech A. Koszek
9977143467 Cast 'data' to 'u_char', as printf() requires this type to be unsigned. This
is what gcc3 complains about.

Without this change, it's impossible to build the kernel with gcc3.

Tested by:	cognet@ (mentor)
Approved by:	cognet@ (mentor)
2007-12-04 20:33:58 +00:00
Andrew Thompson
d4e60294b9 Remove unneeded debug printf that is broken on 64bit arches. 2007-10-12 10:00:26 +00:00
Andrew Thompson
88d3b17273 Update ipw to work with the new net80211 stack, plus other driver improvements.
- Add proper scanning support rather than letting the firmware grab the first
   access point
 - Overhaul state changes
 - Use macros for locking and provide _locked() versions of some functions
 - Increase debugging output
 - Use a callout rather than the old watchdog interface
 - Improve style, function names and defines
 - Add WPA (TKIP) support

Based heavily on a patchset provided by Sam Leffler.
2007-10-12 05:23:00 +00:00
Sam Leffler
14fb6b8fe2 o add 802.11 state machine states for DFS and client-side power save
o fixup drivers to ignore new states

Reviewed by:	avatar (?)
Approved by:	re (blanket wireless)
2007-09-05 21:31:32 +00:00
Tai-hwa Liang
798a64346d MFp4: Fixing IPW_DEBUG enabled builds by converting the last piece of
ic->ic_des_essid to ic->ic_des_ssid[0].

Reviewed by:	sam
Approved by:	re (kensmith)
2007-07-05 15:06:49 +00:00
Kevin Lo
56083486d5 Don't use 64-byte header on each packet in radiotap.
Reviewed by: sam
Approved by: re(bmah)
2007-06-29 02:43:13 +00:00
Sam Leffler
68e8e04e93 Update 802.11 wireless support:
o major overhaul of the way channels are handled: channels are now
  fully enumerated and uniquely identify the operating characteristics;
  these changes are visible to user applications which require changes
o make scanning support independent of the state machine to enable
  background scanning and roaming
o move scanning support into loadable modules based on the operating
  mode to enable different policies and reduce the memory footprint
  on systems w/ constrained resources
o add background scanning in station mode (no support for adhoc/ibss
  mode yet)
o significantly speedup sta mode scanning with a variety of techniques
o add roaming support when background scanning is supported; for now
  we use a simple algorithm to trigger a roam: we threshold the rssi
  and tx rate, if either drops too low we try to roam to a new ap
o add tx fragmentation support
o add first cut at 802.11n support: this code works with forthcoming
  drivers but is incomplete; it's included now to establish a baseline
  for other drivers to be developed and for user applications
o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates
  prepending mbufs for traffic generated locally
o add support for Atheros protocol extensions; mainly the fast frames
  encapsulation (note this can be used with any card that can tx+rx
  large frames correctly)
o add sta support for ap's that beacon both WPA1+2 support
o change all data types from bsd-style to posix-style
o propagate noise floor data from drivers to net80211 and on to user apps
o correct various issues in the sta mode state machine related to handling
  authentication and association failures
o enable the addition of sta mode power save support for drivers that need
  net80211 support (not in this commit)
o remove old WI compatibility ioctls (wicontrol is officially dead)
o change the data structures returned for get sta info and get scan
  results so future additions will not break user apps
o fixed tx rate is now maintained internally as an ieee rate and not an
  index into the rate set; this needs to be extended to deal with
  multi-mode operation
o add extended channel specifications to radiotap to enable 11n sniffing

Drivers:
o ath: add support for bg scanning, tx fragmentation, fast frames,
       dynamic turbo (lightly tested), 11n (sniffing only and needs
       new hal)
o awi: compile tested only
o ndis: lightly tested
o ipw: lightly tested
o iwi: add support for bg scanning (well tested but may have some
       rough edges)
o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data
o wi: lightly tested

This work is based on contributions by Atheros, kmacy, sephe, thompsa,
mlaier, kevlo, and others.  Much of the scanning work was supported by
Atheros.  The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
Lukas Ertl
1069807f7e Drop the ipw softc lock before calling back into net80211, fixing a
LOR/deadlock.

Tested by:   Denis Shaposhnikov <dsh_AT_vlink.ru>, le@
LOR id:      205
MFC in:      3 days
2007-03-24 18:53:33 +00:00
Sam Leffler
fa393cd523 allow net80211 to fillin rate sets
MFC after:	2 weeks
2007-03-11 22:43:35 +00:00
Paolo Pisati
ef544f6312 o break newbus api: add a new argument of type driver_filter_t to
bus_setup_intr()

o add an int return code to all fast handlers

o retire INTR_FAST/IH_FAST

For more info: http://docs.freebsd.org/cgi/getmsg.cgi?fetch=465712+0+current/freebsd-current

Reviewed by: many
Approved by: re@
2007-02-23 12:19:07 +00:00
Luigi Rizzo
33d5497079 Cleanup and document the implementation of firmware(9) based on
a version that i posted earlier on the -current mailing list,
and subsequent feedback received.

The core of the change is just in sys/firmware.h and kern/subr_firmware.c,
while other files are just adaptation of the clients to the ABI change
(const-ification of some parameters and hiding of internal info,
so this is fully compatible at the binary level).

In detail:
- reduce the amount of information exported to clients in struct firmware,
  and constify the pointer;

- internally, document and simplify the implementation of the various
  functions, and make sure error conditions are dealt with properly.

The diffs are large, but the code is really straightforward now (i hope).

Note also that there is a subtle issue with the implementation of
firmware_register(): currently, as in the previous version, we just
store a reference to the 'imagename' argument, but we should rather
copy it because there is no guarantee that this is a static string.
I realised this while testing this code, but i prefer to fix it in
a later commit -- there is no regression with respect to the past.

Note, too, that the version in RELENG_6 has various bugs including
missing locks around the module release calls, mishandling of modules
loaded by /boot/loader, and so on, so an MFC is absolutely necessary
there.  I was just postponing it until this cleanup to avoid doing
things twice.

MFC after: 1 week
2007-02-15 17:21:31 +00:00
Ian Dowse
cbe2bd55ad Hold on to firmware images until the interface detaches since
firmware_get() will not work while resuming. Note that we can't
simply drop the FIRMWARE_UNLOAD flag, because that will result in
a firmware image that can never be unloaded by the user since the
firmware subsystem will hold a linker reference to it (it's not
clear that firmware_put() without FIRMWARE_UNLOAD ever does quite
what you'd want).
2006-06-10 17:29:40 +00:00
Sam Leffler
ff046a6c6b add missed calls to bpf_peers_present 2006-06-02 23:14:40 +00:00
Christian S.J. Peron
16d878cc99 Fix the following bpf(4) race condition which can result in a panic:
(1) bpf peer attaches to interface netif0
	(2) Packet is received by netif0
	(3) ifp->if_bpf pointer is checked and handed off to bpf
	(4) bpf peer detaches from netif0 resulting in ifp->if_bpf being
	    initialized to NULL.
	(5) ifp->if_bpf is dereferenced by bpf machinery
	(6) Kaboom

This race condition likely explains the various different kernel panics
reported around sending SIGINT to tcpdump or dhclient processes. But really
this race can result in kernel panics anywhere you have frequent bpf attach
and detach operations with high packet per second load.

Summary of changes:

- Remove the bpf interface's "driverp" member
- When we attach bpf interfaces, we now set the ifp->if_bpf member to the
  bpf interface structure. Once this is done, ifp->if_bpf should never be
  NULL. [1]
- Introduce bpf_peers_present function, an inline operation which will do
  a lockless read bpf peer list associated with the interface. It should
  be noted that the bpf code will pickup the bpf_interface lock before adding
  or removing bpf peers. This should serialize the access to the bpf descriptor
  list, removing the race.
- Expose the bpf_if structure in bpf.h so that the bpf_peers_present function
  can use it. This also removes the struct bpf_if; hack that was there.
- Adjust all consumers of the raw if_bpf structure to use bpf_peers_present

Now what happens is:

	(1) Packet is received by netif0
	(2) Check to see if bpf descriptor list is empty
	(3) Pickup the bpf interface lock
	(4) Hand packet off to process

From the attach/detach side:

	(1) Pickup the bpf interface lock
	(2) Add/remove from bpf descriptor list

Now that we are storing the bpf interface structure with the ifnet, there is
is no need to walk the bpf interface list to locate the correct bpf interface.
We now simply look up the interface, and initialize the pointer. This has a
nice side effect of changing a bpf interface attach operation from O(N) (where
N is the number of bpf interfaces), to O(1).

[1] From now on, we can no longer check ifp->if_bpf to tell us whether or
    not we have any bpf peers that might be interested in receiving packets.

In collaboration with:	sam@
MFC after:	1 month
2006-06-02 19:59:33 +00:00
Poul-Henning Kamp
c40da00ca3 Since DELAY() was moved, most <machine/clock.h> #includes have been
unnecessary.
2006-05-16 14:37:58 +00:00
Damien Bergamini
f3268efa7f Don't read channel list from EEPROM since we were already scanning all
802.11b channels (1-14) regardless of what EEPROM says.
2006-03-13 20:05:32 +00:00
Damien Bergamini
84ca76709f sync w/ iwi:
o fix locking
o use firmware(9)
o cosmetic
2006-03-12 19:01:00 +00:00
Damien Bergamini
3afda804ab Use memcpy/memset consistently accross ipw and iwi instead of bcopy/bzero. 2005-11-20 16:13:00 +00:00
Damien Bergamini
4c4102ec52 Be more robust when handling Rx interrupts. If we can't allocate and DMA map
a new mbuf, just discard the received frame and reuse the old mbuf.
This should fix kernel panics on high network traffic.

MFC after:      2 weeks
2005-11-13 17:17:40 +00:00
Warner Losh
ad4f426ef6 Make sure that we call if_free(ifp) after bus_teardown_intr. Since we
could get an interrupt after we free the ifp, and the interrupt
handler depended on the ifp being still alive, this could, in theory,
cause a crash.  Eliminate this possibility by moving the if_free to
after the bus_teardown_intr() call.
2005-09-19 03:10:21 +00:00
Damien Bergamini
d599e39db8 Remove IEEE80211_C_WPA from capabilities flags. WPA support is not fully
implemented in ipw.

MFC after:	1 week
2005-08-20 15:03:41 +00:00
Damien Bergamini
4ab4bbc6fe Export adapter's internal statistics sysctl even if IPW_DEBUG is not defined.
MFC after:	1 week
2005-08-20 14:41:16 +00:00
Sam Leffler
b5c9941514 Clarify/fix handling of the current channel:
o add ic_curchan and use it uniformly for specifying the current
  channel instead of overloading ic->ic_bss->ni_chan (or in some
  drivers ic_ibss_chan)
o add ieee80211_scanparams structure to encapsulate scanning-related
  state captured for rx frames
o move rx beacon+probe response frame handling into separate routines
o change beacon+probe response handling to treat the scan table
  more like a scan cache--look for an existing entry before adding
  a new one; this combined with ic_curchan use corrects handling of
  stations that were previously found at a different channel
o move adhoc neighbor discovery by beacon+probe response frames to
  a new ieee80211_add_neighbor routine

Reviewed by:	avatar
Tested by:	avatar, Michal Mertl
MFC after:	2 weeks
2005-08-10 16:22:30 +00:00
Robert Watson
13f4c340ae Propagate rename of IFF_OACTIVE and IFF_RUNNING to IFF_DRV_OACTIVE and
IFF_DRV_RUNNING, as well as the move from ifnet.if_flags to
ifnet.if_drv_flags.  Device drivers are now responsible for
synchronizing access to these flags, as they are in if_drv_flags.  This
helps prevent races between the network stack and device driver in
maintaining the interface flags field.

Many __FreeBSD__ and __FreeBSD_version checks maintained and continued;
some less so.

Reviewed by:	pjd, bz
MFC after:	7 days
2005-08-09 10:20:02 +00:00
Sam Leffler
d365f9c760 Cleanup beacon/listen interval handling:
o separate configured beacon interval from listen interval; this
  avoids potential use of one value for the other (e.g. setting
  powersavesleep to 0 clobbers the beacon interval used in hostap
  or ibss mode)
o bounds check the beacon interval received in probe response and
  beacon frames and drop frames with bogus settings; not clear
  if we should instead clamp the value as any alteration would
  result in mismatched sta+ap configuration and probably be more
  confusing (don't want to log to the console but perhaps ok with
  rate limiting)
o while here up max beacon interval to reflect WiFi standard

Noticed by:	Martin <nakal@nurfuerspam.de>
MFC after:	1 week
2005-08-08 03:30:57 +00:00
Sam Leffler
e4918ecdb9 simplify ieee80211_node_authorize and ieee80211_node_unauthorize api's
MFC after:	3 days
2005-07-22 17:36:12 +00:00
Damien Bergamini
69e2ffe63e fix allocation of rx dma buffers. buffers must be contiguous.
Approved by:	re (scottl)
2005-07-08 19:30:29 +00:00