These ones were unambiguous cases where the Foundation was the only
listed copyright holder (in the associated license block).
Sponsored by: The FreeBSD Foundation
Now that the upper layers all go through a layer to tie into these
information functions that translates an sbuf into char * and len. The
current interface suffers issues of what to do in cases of truncation,
etc. Instead, migrate all these functions to using struct sbuf and these
issues go away. The caller is also in charge of any memory allocation
and/or expansion that's needed during this process.
Create a bus_generic_child_{pnpinfo,location} and make it default. It
just returns success. This is for those busses that have no information
for these items. Migrate the now-empty routines to using this as
appropriate.
Document these new interfaces with man pages, and oversight from before.
Reviewed by: jhb, bcr
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D29937
r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marked).
Use it in preparation for a general review of all nodes.
This is non-functional change that adds annotations to SYSCTL_NODE and
SYSCTL_PROC nodes using one of the soon-to-be-required flags.
Mark all obvious cases as MPSAFE. All entries that haven't been marked
as MPSAFE before are by default marked as NEEDGIANT
Approved by: kib (mentor, blanket)
Commented by: kib, gallatin, melifaro
Differential Revision: https://reviews.freebsd.org/D23718
bhnd_nv_strdup/bhnd_nv_strndup.
If malloc(9) failed during initial bhnd(4) attach, while allocating the root
NVRAM path string ("/"), the returned NULL pointer would be passed as the
destination to memcpy().
Reported by: Ilja Van Sprundel <ivansprundel@ioactive.com>
Previously, the address regions described by disabled admatch entries would
be treated as being mapped to the given core; while incorrect, this was
essentially harmless given that the entries describe unused address space
on the few affected devices.
We now perform parsing of per-core admatch registers and interrupt flags in
siba_erom, correctly skip any disabled admatch entries, and use the
siba_erom API in siba_add_children() to perform enumeration of attached
cores.
- Remove the shim interface that allowed bwn(4) to use either siba_bwn or
bhnd(4), replacing all siba_bwn calls with their bhnd(4) bus equivalents.
- Drop the legay, now-unused siba_bwn bus driver.
- Clean up bhnd(4) board flag defines referenced by bwn(4).
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D13518
any children prior to detach.
With the newbus child deletion ordering changes introduced in r307518,
parent devices are now detached (and their driver set to NULL) prior to
detaching and deleting child devices; child-related bus methods (e.g.
BUS_CHILD_DETACHED, BUS_CHILD_DELETED) are no longer be dispatched to the
parent device driver after it returns 0 (success) from DEVICE_DETACH.
Sponsored by: The FreeBSD Foundation
- Extend the probe method to accept devclasses that inherit from the pci
devclass (e.g. cardbus).
- Some BCM4306-based CardBus adapters appear to advertise 4K SPROM, but
only the first 2K is mapped into BAR0. We can safely assume that the
SPROM data fits within the first 2K of the SPROM, rather than rejecting
the SPROM mapping as invalid.
Sponsored by: The FreeBSD Foundation
- Do not panic on siba(4) detach when the bhnd(4) bus calls
bhnd_get_pmu_info() on a PMU-less device.
- Fix bhnd_pwrctl attach/detach on fixed-clock devices:
- Treat bhnd_pwrctl_updateclk() as a no-op on fixed-clock devices.
- Use bhnd_pwrctl_updateclk() to perform the appropriate clock
transition on detach.
Sponsored by: The FreeBSD Foundation
On a SPROM-less device, the PCI(e) bridge core will be initialized with its
power-on-reset defaults; this can leave the SPROM-derived BHND_PCI_SRSH_PI
value pointing to the wrong backplane address. This value is used by the
PCI core when performing address translation between the static register
windows in BAR0 that map the PCI core's register block, and backplane
address space.
Previously, bhndb_pci(4) incorrectly used the potentially invalid static
BAR0 PCI register windows when attempting to correct the BHND_PCI_SRSH_PI
value in the PCI core's SPROM shadow.
Instead, we now read/update BHND_PCI_SRSH_PI by fetching the PCI core's
backplane address from the core enumeration table, and then using a dynamic
register window to explicitly map the PCI core's register block into BAR0.
Sponsored by: The FreeBSD Foundation
The default 80MHz clock speed returned by bhnd_pmu_si_clock() was already
correct; this just prevents the "No backplane clock specified" warning
printf from being emitted when querying backplane clock speed.
Sponsored by: The FreeBSD Foundation
- Fix reference of uninitialized error value in bhndb_generic_resume() if
the dynamic window count is 0.
- Fix incorrect bhnd_pmu(4) UPTME_MASK and PLL0_PC2_WILD_INT_MASK
constants.
- Variable definitions referenced by our generated SPROM layouts will never
be NULL, but add explicit asserts to make that clear.
- Add missing variable initialization in bhnd_nvram_sprom_ident().
- Fix leak of driver array in bhnd_erom_probe_driver_classes().
- Fix zero-length memset() in bhndb_pci_eio_init().
- Fix an off-by-one error and potential invalid OOBSEL bit shift operation
in bcma_dinfo_init_intrs().
- Remove dead code in siba_suspend_hw().
- Fix duplicate call to bhnd_pmu_enable_regulator() in both the enable and
disable code paths of bhnd_compat_cc_pmu_set_ldoparef().
Reported by: Coverity
CIDs: 1355194, 1362020, 1362022, 1373114, 1366563, 1373115,
1381569, 1381579, 1383555, 1383566, 1383571
Sponsored by: The FreeBSD Foundation
- The window target must always be updated when stealing a register window.
- Fix missing initialization of bhndb(4) region alloc_flags when
registering statically mapped port regions (caught by scan-build).
Approved by: adrian (mentor, implicit)
Sponsored by: The FreeBSD Foundation
the expected default board_vendor value on MIPS SoCs.
This is required by bwn(4) to differentiate between single-band and
dual-band device variants that otherwise share a common chip ID.
Approved by: adrian (mentor, implicit)
Sponsored by: The FreeBSD Foundation
- Add missing call to device_delete_children() in bhndb_detach(), without
which we're left with stale child devices on module unload.
- Pass the parent PCI device to pci_release_msi(), not the bhndb_pci(4)
child.
Approved by: adrian (mentor, implicit)
Sponsored by: The FreeBSD Foundation
bhnd_chipc's children may hold strong provider references to their parent;
we must detach any children before attempting to deregister the bhnd_chipc
device as a bus service provider.
Approved by: adrian (mentor, implicit)
Sponsored by: The FreeBSD Foundation
Very early BHND Wi-Fi devices (e.g. BCM4318) do not support any form of
dynamic clock control; on these devices, any PMU requests that cannot be
met by the device's fixed clock state will return an appropriate error
code.
Approved by: adrian (mentor, implicit)
Sponsored by: The FreeBSD Foundation
Very early (PCI_V0) Broadcom PCI Wi-Fi chipsets have a few quirks when
compared to later PCI(e) core revisions:
- The standard static BAR0 mapping of the PCI core registers is discontiguous,
with siba's cfg0 register block mapped distinctly from the other core
registers.
- No dedicated ChipCommon register mapping is provided; instead, the
single configurable register window must be used to access both
ChipCommon and D11 core registers. The D11 core's operational semantics
guarantee the safety of -- after disabling interrupts -- borrowing
the single dynamic register window to perform the few ChipCommon
operations required by a driver.
To support these early PCI devices:
- Allow defining multiple discontiguous BHNDB_REGWIN_T_CORE register
windows that map a single port/region, and producing bridged resource
allocations backed by those discontiguous windows.
- Support stealing existing register window allocations to fulfill indirect
bhnd(4) bus I/O requests within address ranges tagged with
BHNDB_ALLOC_FULFILL_ON_OVERCOMMIT.
- Fix an inverted test of bhndb_is_pcie_attached() that disabled
PCI-only clock bring-up required by these devices.
Approved by: adrian (mentor, implicit)
Sponsored by: The FreeBSD Foundation
The SIBA_QUIRK_PCIE_D11_SB_TIMEOUT quirk should match on all BCM4312
revisions, and backplane service timeouts must also be disabled.
Approved by: adrian (mentor, implicit)
Sponsored by: The FreeBSD Foundation
Add missing support for specifying I/O control flags during core reset,
and resolve a number of siba(4)-specific reset issues:
- Add missing check for target reject flags in siba_is_hw_suspended().
- Remove incorrect wait on SIBA_TMH_BUSY when modifying any target state
register; this should only be done when waiting for initiated
transactions to clear.
- Add missing wait on SIBA_IM_BY when asserting SIBA_IM_RJ.
- Overwrite any previously set SIBA_TML_REJ flag when bringing the core
out of reset. This fixes a lockup that occured when we brought up a core
(after reboot) that had previously been placed into RESET by siba_bwn(4).
Approved by: adrian (mentor, implicit)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D13039
This includes a number of copyedits for the inline code documentation
comments, updates to the existing bhnd(4), bhndb(4), bcma(4), and siba(4)
man pages, and new man pages for bhnd_chipc(4), bhnd_pmu(4), bhndb_pci(4),
bhnd(9), and bhnd_erom(9).
Approved by: adrian (mentor)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D13021
The driver is functional on both BHND Wi-Fi adapters and MIPS SoCs, but
does not currently include support for features not required by bwn(4),
including GPIO interrupt handling.
Approved by: adrian (mentor, implicit)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D12708
The bwn(4) driver requires a number of extensions to the bhnd(4) PMU
interface to support external configuration of PLLs, LDOs, and other
parameters that require chipset or PHY-specific workarounds.
These changes add support for:
- Writing raw voltage register values to PHY-specific LDO regulator
registers (required by LP-PHY).
- Enabling/disabling PHY-specific LDOs (required by LP-PHY)
- Writing to arbitrary PMU chipctrl registers (required for common PHY PLL
reset support).
- Requesting chipset/PLL-specific spurious signal avoidance modes.
- Querying clock frequency and latency.
Additionally, rather than updating legacy PWRCTL support to conform to the
new PMU interface:
- PWRCTL API is now provided by a bhnd_pwrctl_if.m interface.
- Since PWRCTL is only found in older SSB-based chipsets, translation from
bhnd(4) bus APIs to corresponding PWRCTL operations is now handled
entirely within the siba(4) driver.
- The PWRCTL-specific host bridge clock gating APIs in bhnd_bus_if.m have
been lifted out into a standalone bhnd_pwrctl_hostb_if.m interface.
Approved by: adrian (mentor, implicit)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D12664
BHND Wi-Fi chipsets and SoCs share a common DMA engine, operating within
backplane address space. To support host DMA on Wi-Fi chipsets, the bridge
core maps host address space onto the backplane; any host addresses must
be translated to their corresponding backplane address.
- Defines a new bhnd_get_dma_translation(9) API to support querying DMA
address translation parameters from the bhnd(4) bus.
- Extends bhndb(4) to provide DMA translation descriptors from a DMA
address translation table defined in the host bridge-specific
bhndb_hwcfg.
- Defines bhndb(4) DMA address translation tables for all supported host
bridge cores.
- Extends mips/broadcom's bhnd_nexus driver to return an identity (no-op)
DMA translation descriptor; no translation is required when addressing
the SoC backplane.
Approved by: adrian (mentor)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D12582
On BHND MIPS SoCs, this replaces the use of hard-coded MIPS IRQ#s in the
common bhnd(4) core drivers; we now register an INTRNG child PIC that
handles routing of backplane interrupt vectors via the MIPS core.
On BHND PCI devices, backplane interrupt vectors are now routed to the
PCI/PCIe host bridge core when bus_setup_intr() is called, where they are
dispatched by the PCI core via a host interrupt (e.g. INTx/MSI).
The bhndb(4) bridge driver tracks registered interrupt handlers for the
bridged bhnd(4) devices and manages backplane interrupt routing, while
delegating actual bus interrupt setup/teardown to the parent bus on behalf
of the bridged cores.
Approved by: adrian (mentor, implicit)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D12518
parser.
This allows us to use the EROM parser API in cases where the standard bus
space I/O APIs are unsuitable. In particular, this will allow us to parse
the device enumeration table directly from bhndb(4) drivers, prior to
full attach and configuration of the bridge.
Approved by: adrian (mentor)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D12510
Add bhnd(4) API for explicitly registering BHND platform devices (ChipCommon,
PMU, NVRAM, etc) with the bus, rather than walking the newbus hierarchy to
discover platform devices. These devices are now also refcounted; attempting
to deregister an actively used platform device will return EBUSY.
This resolves a lock ordering incompatibility with bwn(4)'s firmware loading
threads; previously it was necessary to acquire Giant to protect newbus access
when locating and querying the NVRAM device.
Approved by: adrian (mentor)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D12392
- Fix typo of PLL Type 4
- Don't panic of frequency getters
Submitted by: Hiroki Mori <yamori813@yahoo.co.jp>
Differential Revision: https://reviews.freebsd.org/D10967
In r315866, we introduced a direct read of the 8-bit sromrev field from the
memory mapped SPROM/OTP device. On OTP devices that require 16-bit access
alignment, this read fails, preventing identification of the SPROM layout.
So, let's perform an aligned read of the combined 16-bit sromrev/crc field
instead.
Approved by: adrian (mentor, implicit)
