Without this, the signals are shown seemingly randomly in the output before
the final summary is shown. This is especially noticeable when there is
not much output from the application being traced.
Discussed with: jhb
Relnotes: yes
CloudABI has approximately 50 system calls that do not depend on the
pointer size of the system. As the ABI is pretty compact, it takes
little effort to each truss(8) the formatting rules for these system
calls. Start off by formatting pointer size independent system calls.
Changes:
- Make it possible to include the CloudABI system call definitions in
FreeBSD userspace builds. Add ${root}/sys to the truss(8) Makefile so
we can pull in <compat/cloudabi/cloudabi_syscalldefs.h>.
- Refactoring: patch up amd64-cloudabi64.c to use the CLOUDABI_*
constants instead of rolling our own table.
- Add table entries for all of the system calls.
- Add new generic formatting types (UInt, IntArray) that we'll be using
to format unsigned integers and arrays of integers.
- Add CloudABI specific formatting types.
Approved by: jhb
Differential Revision: https://reviews.freebsd.org/D3836
This uses the kdump(1) utrace support code directly until a common library
is created.
This allows malloc(3) tracing with MALLOC_CONF=utrace:true and rtld tracing
with LD_UTRACE=1. Unknown utrace(2) data is just printed as hex.
PR: 43819 [inspired by]
Reviewed by: jhb
MFC after: 2 weeks
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D3819
This is done by changing get_syscall() to either lookup the known syscall
or add it into the list with the default handlers for printing.
This also simplifies some code to not have to check if the syscall variable
is set or NULL.
Reviewed by: jhb
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D3792
This change adds the bits that are necessary to fetch system call
arguments and return values from trapframes for CloudABI. This allows us
to properly print system calls with the right name. We need to make sure
that we properly convert error numbers when system calls fail.
We still need to improve truss to pretty-print some of the system calls
that have flags.
address's length (and then overriding it if it "looks wrong"), use the
next argument to the system call to determine the length. This is more
reliable since this is what the kernel depends on anyway and is also
simpler.
integer. Fix the argument decoding to treat this as a quad instead of an
int. This includes using QUAD_ALIGN and QUAD_SLOTS as necessary. To
continue printing IDs in decimal, add a new QuadHex argument type that
prints a 64-bit integer in hex, use QuadHex for the existing off_t arguments,
repurpose Quad to print a 64-bit integer in decimal, and use Quad for id_t
arguments.
This fixes the decoding of wait6(2) and procctl(2) on 32-bit platforms.
probably fallout from the removal of the extra padding argument before
off_t in 7. However, that padding still exists for 32-bit powerpc, so
use QUAD_ALIGN.
- Fix QUAD_ALIGN to be zero for powerpc64. It should only be set to 1
for 32-bit platforms that add padding to align 64-bit arguments.
- Refactor the interface between the ABI-independent code and the
ABI-specific backends. The backends now provide smaller hooks to
fetch system call arguments and return values. The rest of the
system call entry and exit handling that was previously duplicated
among all the backends has been moved to one place.
- Merge the loop when waiting for an event with the loop for handling stops.
This also means not emulating a procfs-like interface on top of ptrace().
Instead, use a single event loop that fetches process events via waitid().
Among other things this allows us to report the full 32-bit exit value.
- Use PT_FOLLOW_FORK to follow new child processes instead of forking a new
truss process for each new child. This allows one truss process to monitor
a tree of processes and truss -c should now display one total for the
entire tree instead of separate summaries per process.
- Use the recently added fields to ptrace_lwpinfo to determine the current
system call number and argument count. The latter is especially useful
and fixes a regression since the conversion from procfs. truss now
generally prints the correct number of arguments for most system calls
rather than printing extra arguments for any call not listed in the
table in syscalls.c.
- Actually check the new ABI when processes call exec. The comments claimed
that this happened but it was not being done (perhaps this was another
regression in the conversion to ptrace()). If the new ABI after exec
is not supported, truss detaches from the process. If truss does not
support the ABI for a newly executed process the process is killed
before it returns from exec.
- Along with the refactor, teach the various ABI-specific backends to
fetch both return values, not just the first. Use this to properly
report the full 64-bit return value from lseek(). In addition, the
handler for "pipe" now pulls the pair of descriptors out of the
return values (which is the true kernel system call interface) but
displays them as an argument (which matches the interface exported by
libc).
- Each ABI handler adds entries to a linker set rather than requiring
a statically defined table of handlers in main.c.
- The arm and mips system call fetching code was changed to follow the
same pattern as amd64 (and the in-kernel handler) of fetching register
arguments first and then reading any remaining arguments from the
stack. This should fix indirect system call arguments on at least
arm.
- The mipsn32 and n64 ABIs will now look for arguments in A4 through A7.
- Use register %ebp for the 6th system call argument for Linux/i386 ABIs
to match the in-kernel argument fetch code.
- For powerpc binaries on a powerpc64 system, fetch the extra arguments
on the stack as 32-bit values that are then copied into the 64-bit
argument array instead of reading the 32-bit values directly into the
64-bit array.
Reviewed by: kib (earlier version)
Tested on: amd64 (FreeBSD/amd64 & i386), i386, arm (earlier version)
Tested on: powerpc64 (FreeBSD/powerpc64 & powerpc)
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D3575
arrays generically rather than duplicating a hack in all of the backends.
- Add two new system call argument types and use them instead of StringArray
for the argument and environment arguments execve and linux_execve.
- Honor the -a/-e flags in the handling of these new types.
- Instead of printing "<missing argument>" when the decoding is disabled,
print the raw pointer value.
Before truss would fetch 100 string pointers and happily walk off the end
of the array if it never found a NULL. This also means for a short argv
list it could fail entirely if the 100 string pointers spanned into an
unmapped page.
Instead, fetch page-aligned blocks of string pointers in a loop fetching
each string until a NULL is found.
While here, make use of the open memstream file descriptor instead of
allocating a temporary array. This allows us to fetch each string once
instead of twice.
- Print the ident value as decimal instead of hexadecimal for filter types
that use "small" values such as file descriptors and PIDs.
- Decode NOTE_* flags in the fflags field of kevents for several system
filter types.
with open_memstream() to build the string for each argument. This allows
for more complicated argument building without resorting to intermediate
malloc's, etc.
Related, the strsig*() functions no longer return allocated strings but
use a static global buffer instead.
- Don't exit if get_struct() fails, instead print the raw pointer value to
match all other argument decoding cases.
- Use an xlat table instead of a home-rolled switch for the operation name.
- Display the nested socketcall args structure as a structure instead of as
two inline arguments.
sigqueue, sigreturn, sigsuspend, sigtimedwait, sigwait, sigwaitinfo, and
thr_kill.
- Print signal sets as a structure (with {}'s) and in particular use this to
differentiate empty sets from a NULL pointer.
- Decode arguments for some other system calls: issetugid, pipe2, sysarch
(operations are only decoded for amd64 and i386), and thr_self.
especially useful now that libc's open() always calls openat(). While here,
fix a few other things:
- Decode the mode argument passed to access(), eaccess(), and faccessat().
- Decode the atfd paramete to pretty-print AT_FDCWD.
- Decode the special AT_* flags used with some of the *at() system calls.
- Decode arguments for fchmod(), lchmod(), fchown(), lchown(), eaccess(),
and futimens().
- Decode both of the timeval structures passed to futimes() instead of just
the first one.
length. In particular, instead of blinding fetching 1k blocks, do an initial
fetch up to the end of the current page followed by page-sized fetches up to
the maximum size. Previously if the 1k buffer crossed a page boundary and
the second page was not valid, the entire operation would fail.
Off by default, build behaves normally.
WITH_META_MODE we get auto objdir creation, the ability to
start build from anywhere in the tree.
Still need to add real targets under targets/ to build packages.
Differential Revision: D2796
Reviewed by: brooks imp
in a separate word from the _count. This does not permit both items to
be updated atomically in a portable manner. As a result, sem_post()
must always perform a system call to safely clear _has_waiters.
This change removes the _has_waiters field and instead uses the high bit
of _count as the _has_waiters flag. A new umtx object type (_usem2) and
two new umtx operations are added (SEM_WAIT2 and SEM_WAKE2) to implement
these semantics. The older operations are still supported under the
COMPAT_FREEBSD9/10 options. The POSIX semaphore API in libc has
been updated to use the new implementation. Note that the new
implementation is not compatible with the previous implementation.
However, this only affects static binaries (which cannot be helped by
symbol versioning). Binaries using a dynamic libc will continue to work
fine. SEM_MAGIC has been bumped so that mismatched binaries will error
rather than corrupting a shared semaphore. In addition, a padding field
has been added to sem_t so that it remains the same size.
Differential Revision: https://reviews.freebsd.org/D961
Reported by: adrian
Reviewed by: kib, jilles (earlier version)
Sponsored by: Norse
Older binaries are still permitted to use these flags.
PR: 193961 (exp-run in ports)
Differential Revision: https://reviews.freebsd.org/D848
Reviewed by: kib