Commit Graph

232 Commits

Author SHA1 Message Date
Nicolas Souchu
b3fc615726 Remove vga_pci generic driver.
Approved by:	Mike Smith <msmith@freebsd.org>
2001-01-05 16:40:30 +00:00
Matt Jacob
afd27fce94 Sanity check ptr for legal values so it is less likely
(but not impossible) to get stuck in an infinite loop.

Obtained from:	msmith@freebsd.org
2001-01-01 16:49:31 +00:00
Justin T. Gibbs
98f89aa0a9 Add PCIR_CAP_PTR as a define for the location of the capability
pointer of type 0 devices.  This is required by my last aic7xxx change.
2000-12-20 14:36:52 +00:00
Mike Smith
70b5f189c9 Remove a redundant prototype. 2000-12-13 04:22:04 +00:00
Mike Smith
3742d6ca91 Don't try to free the now-nonexistent hdrspec field. This one snuck by
me in the previous round of patches.  Oops.
2000-12-13 02:45:03 +00:00
Mike Smith
8983cfbf27 Next round of PCI subsystem updates:
- Break out the /dev/pci driver into a separate file.
 - Kill the COMPAT_OLDPCI support.
 - Make the EISA bridge attach a bit more like the old code; explicitly
   check for the existence of eisa0/isa0 and only attach if they don't
   already exist.  Only make one bus_generic_attach() pass over the
   bridge, once both busses are attached.  Note that the stupid Intel
   bridge's class is entirely unpredictable.
 - Add prototypes and re-layout the core PCI modules in line with
   current coding standards (not a major whitespace change, just moving
   the module data to the top of the file).
 - Remove redundant type-2 bridge support from the core PCI code; the
   PCI-CardBus code does this itself internally.  Remove the now
   entirely redundant header-class-specific support, as well as the
   secondary and subordinate bus number fields.  These are bridge
   attributes now.
 - Add support for PCI Extended Capabilities.
 - Add support for PCI Power Management.  The interface currently
   allows a driver to query and set the power state of a device.
 - Add helper functions to allow drivers to enable/disable busmastering
   and the decoding of I/O and memory ranges.
 - Use PCI_SLOTMAX and PCI_FUNCMAX rather than magic numbers in some
   places.
 - Make the PCI-PCI bridge code a little more paranoid about valid
   I/O and memory decodes.
 - Add some more PCI register definitions for the command and status
   registers.  Correct another bogus definition for type-1 bridges.
2000-12-13 01:25:11 +00:00
Mike Smith
4fa59183f1 - We have access to our own device_t here, so use pci_read_config
rather than finding our parent pcib and using its PCI_READ_CONFIG
   method.

 - Fix the defines for the 32-bit I/O decode registers, and properly
   process the 16-bit versions.  Now we will correctly check that I/O
   resources behind the bridge are going to be decoded.

 - Bring the quirk for the Orion PCI:PCI bridge in here (since it
   seems to want to set the secondary/supplementary bus numbers).

 - Use PCI_SLOTMAX rather than a magic number.
2000-12-12 13:20:35 +00:00
Mike Smith
52daea05c5 Don't try to fix up the Orion here; the interface we use is wrong for the
new code (and about to disappear too).
2000-12-12 13:11:42 +00:00
Mike Smith
fed8edf563 - Don't return early from the PCI:EISA bridge attachment, or we will lose
the ISA bus.
 - Don't expect that a PCI:ISA bridge will have a correct class value;
   if we're checking PCI IDs, only depend on these.

This should fix the loss of ISA on machines with PCI:EISA bridges like the
AS4100.
2000-12-12 03:33:02 +00:00
Mike Smith
e620c314df It looks like we can't count on these devices always having a consistent
class/subclass, so give up trying to cull the list.  Instead, complain
in the bootverbose case, but otherwise just accept that we will have to
carry this list of device IDs around.
2000-12-11 10:04:01 +00:00
Mike Smith
772922d066 The ICH2 reports itself as a PCI:ISA bridge, so don't special-case it
here.

Submitted by:	Michael Harnois <mdharnois@home.com>
2000-12-10 11:15:19 +00:00
Mike Smith
fc3438d892 Cosmetic nit; separate slot/function with '.' not ':' 2000-12-09 09:37:07 +00:00
Mike Smith
2961fc5ac4 - Fix the device database parsing code so that it actually works.
- Improve the formatting for devices identified by the database.
 - Fix the pcib_route_interrupt method definition, as an old version
   snuck in here somehow 8(
 - Remove a couple of the vendor/device IDs for PCI:ISA bridges which
   correctly identify themselves.

Submitted by:	peter
2000-12-09 09:15:38 +00:00
Mike Smith
bb0d0a8efc Next phase in the PCI subsystem cleanup.
- Move PCI core code to dev/pci.
 - Split bridge code out into separate modules.
 - Remove the descriptive strings from the bridge drivers.  If you
   want to know what a device is, use pciconf.  Add support for
   broadly identifying devices based on class/subclass, and for
   parsing a preloaded device identification database so that if
   you want to waste the memory, you can identify *anything* we know
   about.
 - Remove machine-dependant code from the core PCI code.  APIC interrupt
   mapping is performed by shadowing the intline register in machine-
   dependant code.
 - Bring interrupt routing support to the Alpha
   (although many platforms don't yet support routing or mapping
   interrupts entirely correctly).  This resulted in spamming
   <sys/bus.h> into more places than it really should have gone.
 - Put sys/dev on the kernel/modules include path.  This avoids
   having to change *all* the pci*.h includes.
2000-12-08 22:11:23 +00:00
Andrew Gallatin
689634a3ea Convert the pcib_{read,write}_config args from signed to unsigned,
like the args to the config space accessors these functions replaced.

This reduces the likelyhood of overflow when the args are used in
macros on the alpha.  This prevents memory management faults when
probing the pci bus on sables, multias and nonames.

Approved by: dfr
Tested by: Bernd Walter <ticso@cicely8.cicely.de>
2000-12-01 15:27:48 +00:00
Matthew N. Dodd
1581afb38d Reduce code duplication by using the GET_RESOURCE_LIST bus method and related
generic resource_list management functions.

I'll deal with the EISA bits later.

Not objected to by:	 new-bus
2000-11-28 07:12:12 +00:00
Darren Reed
72371ff249 fix warning compile error about unused variable 2000-10-29 10:07:43 +00:00
Poul-Henning Kamp
db4035961b Fix params passed to pci_porten() and pci_memen(). 2000-10-29 09:59:28 +00:00
Mike Smith
f53e8493fb Unconditionally turning on the I/O and memory enable bits in the PCI
command register is too aggressive.  Revert to the previous behaviour, but
leave the new behaviour available as an undocumented option.  It's not
clear what the Right, Right Thing is to do here, but the more conservative
approach is safer.
2000-10-28 23:07:13 +00:00
Mike Smith
011d43cdb3 Allow PCI busses to be connected to host bridges detected by ACPI as well. 2000-10-28 07:04:07 +00:00
Mike Smith
c7e95d0abe Write the routed interrupt back to PCI configuration space. 2000-10-19 08:07:23 +00:00
Warner Losh
8302c16686 Forgot to commit this last night.
Define interrupt routing method.

Submitted by: msmith
2000-10-16 19:43:44 +00:00
Andrew Gallatin
68ab2e8672 The previous commit broke kernel builds on alpha (and probably ia64).
#ifdef away the offending code until somebody with more newbus fu than
me can figure out where to put a default function that returns 255
without touching each alpha chipset driver..
2000-10-16 15:38:11 +00:00
Warner Losh
9bf4bbcaf7 When a pci device hasn't had an interrupt routed to it (signified by
the intline of 255) go ahead and route the interrupt when we allocate
an interrupt.

Submitted by: msmith
2000-10-16 07:24:00 +00:00
Mike Smith
0441aa9a52 Validate the PCI bus number that we fetch from our parent, since there's no
guarantee that everything attached to *it* is a PCI bus.
2000-10-09 00:43:45 +00:00
Archie Cobbs
645d61ffeb Add definition for PCIS_SERIALBUS_SMBUS PCI device subclass.
Remove cut & paste leftovers.
2000-10-02 00:41:43 +00:00
Peter Wemm
b6c8407840 Get out the roto-rooter and clean up the abuse of nexus ivars by the
i386/isa/pcibus.c.  This gets -current running again on multiple host->pci
machines after the most recent nexus commits.  I had discussed this with
Mike Smith, but ended up doing it slightly differently to what we
discussed as it turned out cleaner this way.  Mike was suggesting creating
a new resource (SYS_RES_PCIBUS) or something and using *_[gs]et_resource(),
but IMHO that wasn't ideal as SYS_RES_* is meant to be a global platform
property, not a quirk of a given implementation.  This does use the ivar
methods but does so properly.  It also now prints the physical pci bus that
a host->pci bridge (pcib) corresponds to.
2000-09-28 00:37:32 +00:00
Justin T. Gibbs
cb4d93cdbf Add PCIM_CMD_MWRICEN, the bit in the command register in PCI space
that enables memory write and invalidate cycles on a bus master.
2000-09-16 20:06:13 +00:00
Peter Wemm
28ea1bf869 When dumping the 'found devices' list in verbose mode, actually show the
bus/slot/function numbers.  The old PCI code used other markers or
something, but without it here under the new pci code it is very hard to
tell which device is which (this only affects bootverbose mode).
2000-09-05 00:32:19 +00:00
Mike Smith
f7c7ba14bf If a base address register has been set up by the BIOS, but the relevant
enable bit hasn't been set in the command register, set the bit and
honour the register.  It seems that quite a few lazy BIOS writers
aren't bothering to do this, which upsets the existing code and causes
us to miss out on properly-configured devices.
2000-09-01 23:09:02 +00:00
Peter Wemm
54613737b4 Remove duplicate static definition of pci_devclass 2000-08-31 21:27:51 +00:00
Doug Rabson
21c3015a24 * Completely rewrite the alpha busspace to hide the implementation from
the drivers.
* Remove legacy inx/outx support from chipset and replace with macros
  which call busspace.
* Rework pci config accesses to route through the pcib device instead of
  calling a MD function directly.

With these changes it is possible to cleanly support machines which have
more than one independantly numbered PCI busses. As a bonus, the new
busspace implementation should be measurably faster than the old one.
2000-08-28 21:48:13 +00:00
Doug Rabson
f1954f5752 Nuke the useless chip driver. It gets in the way when you want to load
a functional driver for the device.
2000-06-09 16:00:29 +00:00
Peter Wemm
30d1c11e3a Encapsulate the old PCI compatability support and APIs completely under
"options COMPAT_OLDPCI".  This option already existed, but now also tidies
up the declarations in #include <pci/pci*.h>.  It is amazing how much stuff
was using the old pre-FreeBSD 3.x names and going silently undetected.
2000-05-28 16:35:57 +00:00
Jake Burkholder
e39756439c Back out the previous change to the queue(3) interface.
It was not discussed and should probably not happen.

Requested by:		msmith and others
2000-05-26 02:09:24 +00:00
Jake Burkholder
740a1973a6 Change the way that the queue(3) structures are declared; don't assume that
the type argument to *_HEAD and *_ENTRY is a struct.

Suggested by:	phk
Reviewed by:	phk
Approved by:	mdodd
2000-05-23 20:41:01 +00:00
Doug Rabson
2e9a65c474 Print the correct value for the map type on a verbose boot.
PR:	kern/18662
Submitted by: tamaru@ap.t.u-tokyo.ac.jp
2000-05-18 20:28:15 +00:00
Matt Jacob
ec3da347ca Update 'hose' (actually, MCPCIA instance #) for Alpha Rawhide systems.
We have *got* to fix this bogosity of trying to steal part of the PCI
address space for this stuff.
2000-05-07 04:56:19 +00:00
Bruce Evans
3aae7b16d2 Fixed the type of some ivar access functions. Ivars have type uintptr_t,
not u_long.  On i386's with 64-bit longs, returning u_longs indirectly
in (more than) the space reserved for uintptr_t's tended to corrupt the
previous frame pointer in the stack frame, so it was not easy to debug.
The type mismatches are hidden by the bogus cast in DEVMETHOD().
2000-04-30 10:01:56 +00:00
Poul-Henning Kamp
ed6aff7387 Remove unneeded <sys/buf.h> includes.
Due to some interesting cpp tricks in lockmgr, the LINT kernel shrinks
by 924 bytes.
2000-04-18 15:15:39 +00:00
Doug Rabson
f7b7769172 * Factor out the object system from new-bus so that it can be used by
non-device code.
* Re-implement the method dispatch to improve efficiency. The new system
  takes about 40ns for a method dispatch on a 300Mhz PII which is only
  10ns slower than a direct function call on the same hardware.

This changes the new-bus ABI slightly so make sure you re-compile any
driver modules which you use.
2000-04-08 14:17:18 +00:00
Peter Wemm
d213a95368 Unused definitions. 2000-03-20 08:21:52 +00:00
Peter Wemm
56dac036b6 Bandaid for src/sys/modules which broke world 2000-03-20 01:22:27 +00:00
Peter Wemm
80060e8897 Connect the ISA and PCI compatability shims to an option. In this case
it's options COMPAT_OLDISA and COMPAT_OLDPCI.  This is meant to be a
fairly strong incentive to update the older drivers to newbus, but doesn't
(quite) leave anybody hanging with no hardware support.  I was talking with
a few folks and I was encouraged to simply break or disable the shims but
that was a bit too drastic for my liking.
2000-03-19 13:07:12 +00:00
Nick Hibma
e5399702e8 Print the PCI resources even if they are disabled. This shows more clearly
when the BIOS is forgetful about initialising the USB controllers.
2000-03-18 19:18:36 +00:00
Matt Jacob
17d75f8ecb Alpha 8200 port: Until we fix things better, determine which alpha CPU
platform we're running on so we know how many bits to reserve at the top
end for the 'hose' value. It turns out that there's *just* enough room
to support all possible hoses on TurboLaser.
Reviewed by:	gallatin@freebsd.org, dfr@free3bsd.org
2000-03-15 23:50:31 +00:00
Bill Fumerola
bebfe1cadb o No need to print the vendor/device ID for things that matched succesfully.
o ``<device name>'' versus ``device name'' for things that fall under nomatch.

Reviewed by:	dfr (in principle)
Approved by:	Baron von Hubbard
2000-02-22 21:44:39 +00:00
Doug Rabson
6874d62958 Remove the vga-pci driver. It serves no purpose and it hides the hardware
from useful drivers such as the 3D DRI drivers I will be porting for
hardware accelerated OpenGL. The hardware will still be reported during
boot using the nomatch system.

Approved by: jkh
2000-02-19 09:44:06 +00:00
Peter Wemm
483df2dd3b Spell "pci_delete_resource" correctly.
Approved by:	jkh (who must be very sick of requests now :-)
2000-02-01 18:02:12 +00:00
Peter Wemm
cebf86fa3f Put a FYI in the compatability shims so that people are aware that they
are using an old unconverted driver.  Most (if not all) of the drivers
for common hardware are newbus these days.  However, we don't want
to encourage people to take the easy way out and write new drivers
using the shims.  This is just passive "encouragement".

Reviewed by:	phk
2000-01-29 15:37:36 +00:00