Commit Graph

27 Commits

Author SHA1 Message Date
Kenneth D. Merry
9a6844d55f Add support for managing Shingled Magnetic Recording (SMR) drives.
This change includes support for SCSI SMR drives (which conform to the
Zoned Block Commands or ZBC spec) and ATA SMR drives (which conform to
the Zoned ATA Command Set or ZAC spec) behind SAS expanders.

This includes full management support through the GEOM BIO interface, and
through a new userland utility, zonectl(8), and through camcontrol(8).

This is now ready for filesystems to use to detect and manage zoned drives.
(There is no work in progress that I know of to use this for ZFS or UFS, if
anyone is interested, let me know and I may have some suggestions.)

Also, improve ATA command passthrough and dispatch support, both via ATA
and ATA passthrough over SCSI.

Also, add support to camcontrol(8) for the ATA Extended Power Conditions
feature set.  You can now manage ATA device power states, and set various
idle time thresholds for a drive to enter lower power states.

Note that this change cannot be MFCed in full, because it depends on
changes to the struct bio API that break compatilibity.  In order to
avoid breaking the stable API, only changes that don't touch or depend on
the struct bio changes can be merged.  For example, the camcontrol(8)
changes don't depend on the new bio API, but zonectl(8) and the probe
changes to the da(4) and ada(4) drivers do depend on it.

Also note that the SMR changes have not yet been tested with an actual
SCSI ZBC device, or a SCSI to ATA translation layer (SAT) that supports
ZBC to ZAC translation.  I have not yet gotten a suitable drive or SAT
layer, so any testing help would be appreciated.  These changes have been
tested with Seagate Host Aware SATA drives attached to both SAS and SATA
controllers.  Also, I do not have any SATA Host Managed devices, and I
suspect that it may take additional (hopefully minor) changes to support
them.

Thanks to Seagate for supplying the test hardware and answering questions.

sbin/camcontrol/Makefile:
	Add epc.c and zone.c.

sbin/camcontrol/camcontrol.8:
	Document the zone and epc subcommands.

sbin/camcontrol/camcontrol.c:
	Add the zone and epc subcommands.

	Add auxiliary register support to build_ata_cmd().  Make sure to
	set the CAM_ATAIO_NEEDRESULT, CAM_ATAIO_DMA, and CAM_ATAIO_FPDMA
	flags as appropriate for ATA commands.

	Add a new get_ata_status() function to parse ATA result from SCSI
	sense descriptors (for ATA passthrough over SCSI) and ATA I/O
	requests.

sbin/camcontrol/camcontrol.h:
	Update the build_ata_cmd() prototype

	Add get_ata_status(), zone(), and epc().

sbin/camcontrol/epc.c:
	Support for ATA Extended Power Conditions features.  This includes
	support for all features documented in the ACS-4 Revision 12
	specification from t13.org (dated February 18, 2016).

	The EPC feature set allows putting a drive into a power power mode
	immediately, or setting timeouts so that the drive will
	automatically enter progressively lower power states after various
	idle times.

sbin/camcontrol/fwdownload.c:
	Update the firmware download code for the new build_ata_cmd()
	arguments.

sbin/camcontrol/zone.c:
	Implement support for Shingled Magnetic Recording (SMR) drives
	via SCSI Zoned Block Commands (ZBC) and ATA Zoned Device ATA
	Command Set (ZAC).

	These specs were developed in concert, and are functionally
	identical.  The primary differences are due to SCSI and ATA
	differences.  (SCSI is big endian, ATA is little endian, for
	example.)

	This includes support for all commands defined in the ZBC and
	ZAC specs.

sys/cam/ata/ata_all.c:
	Decode a number of additional ATA command names in ata_op_string().

	Add a new CCB building function, ata_read_log().

	Add ata_zac_mgmt_in() and ata_zac_mgmt_out() CCB building
	functions.  These support both DMA and NCQ encapsulation.

sys/cam/ata/ata_all.h:
	Add prototypes for ata_read_log(), ata_zac_mgmt_out(), and
	ata_zac_mgmt_in().

sys/cam/ata/ata_da.c:
	Revamp the ada(4) driver to support zoned devices.

	Add four new probe states to gather information needed for zone
	support.

	Add a new adasetflags() function to avoid duplication of large
	blocks of flag setting between the async handler and register
	functions.

	Add new sysctl variables that describe zone support and paramters.

	Add support for the new BIO_ZONE bio, and all of its subcommands:
	DISK_ZONE_OPEN, DISK_ZONE_CLOSE, DISK_ZONE_FINISH, DISK_ZONE_RWP,
	DISK_ZONE_REPORT_ZONES, and DISK_ZONE_GET_PARAMS.

sys/cam/scsi/scsi_all.c:
	Add command descriptions for the ZBC IN/OUT commands.

	Add descriptions for ZBC Host Managed devices.

	Add a new function, scsi_ata_pass() to do ATA passthrough over
	SCSI.  This will eventually replace scsi_ata_pass_16() -- it
	can create the 12, 16, and 32-byte variants of the ATA
	PASS-THROUGH command, and supports setting all of the
	registers defined as of SAT-4, Revision 5 (March 11, 2016).

	Change scsi_ata_identify() to use scsi_ata_pass() instead of
	scsi_ata_pass_16().

	Add a new scsi_ata_read_log() function to facilitate reading
	ATA logs via SCSI.

sys/cam/scsi/scsi_all.h:
	Add the new ATA PASS-THROUGH(32) command CDB.  Add extended and
	variable CDB opcodes.

	Add Zoned Block Device Characteristics VPD page.

	Add ATA Return SCSI sense descriptor.

	Add prototypes for scsi_ata_read_log() and scsi_ata_pass().

sys/cam/scsi/scsi_da.c:
	Revamp the da(4) driver to support zoned devices.

	Add five new probe states, four of which are needed for ATA
	devices.

	Add five new sysctl variables that describe zone support and
	parameters.

	The da(4) driver supports SCSI ZBC devices, as well as ATA ZAC
	devices when they are attached via a SCSI to ATA Translation (SAT)
	layer.  Since ZBC -> ZAC translation is a new feature in the T10
	SAT-4 spec, most SATA drives will be supported via ATA commands
	sent via the SCSI ATA PASS-THROUGH command.  The da(4) driver will
	prefer the ZBC interface, if it is available, for performance
	reasons, but will use the ATA PASS-THROUGH interface to the ZAC
	command set if the SAT layer doesn't support translation yet.
	As I mentioned above, ZBC command support is untested.

	Add support for the new BIO_ZONE bio, and all of its subcommands:
	DISK_ZONE_OPEN, DISK_ZONE_CLOSE, DISK_ZONE_FINISH, DISK_ZONE_RWP,
	DISK_ZONE_REPORT_ZONES, and DISK_ZONE_GET_PARAMS.

	Add scsi_zbc_in() and scsi_zbc_out() CCB building functions.

	Add scsi_ata_zac_mgmt_out() and scsi_ata_zac_mgmt_in() CCB/CDB
	building functions.  Note that these have return values, unlike
	almost all other CCB building functions in CAM.  The reason is
	that they can fail, depending upon the particular combination
	of input parameters.  The primary failure case is if the user
	wants NCQ, but fails to specify additional CDB storage.  NCQ
	requires using the 32-byte version of the SCSI ATA PASS-THROUGH
	command, and the current CAM CDB size is 16 bytes.

sys/cam/scsi/scsi_da.h:
	Add ZBC IN and ZBC OUT CDBs and opcodes.

	Add SCSI Report Zones data structures.

	Add scsi_zbc_in(), scsi_zbc_out(), scsi_ata_zac_mgmt_out(), and
	scsi_ata_zac_mgmt_in() prototypes.

sys/dev/ahci/ahci.c:
	Fix SEND / RECEIVE FPDMA QUEUED in the ahci(4) driver.

	ahci_setup_fis() previously set the top bits of the sector count
	register in the FIS to 0 for FPDMA commands.  This is okay for
	read and write, because the PRIO field is in the only thing in
	those bits, and we don't implement that further up the stack.

	But, for SEND and RECEIVE FPDMA QUEUED, the subcommand is in that
	byte, so it needs to be transmitted to the drive.

	In ahci_setup_fis(), always set the the top 8 bits of the
	sector count register.  We need it in both the standard
	and NCQ / FPDMA cases.

sys/geom/eli/g_eli.c:
	Pass BIO_ZONE commands through the GELI class.

sys/geom/geom.h:
	Add g_io_zonecmd() prototype.

sys/geom/geom_dev.c:
	Add new DIOCZONECMD ioctl, which allows sending zone commands to
	disks.

sys/geom/geom_disk.c:
	Add support for BIO_ZONE commands.

sys/geom/geom_disk.h:
	Add a new flag, DISKFLAG_CANZONE, that indicates that a given
	GEOM disk client can handle BIO_ZONE commands.

sys/geom/geom_io.c:
	Add a new function, g_io_zonecmd(), that handles execution of
	BIO_ZONE commands.

	Add permissions check for BIO_ZONE commands.

	Add command decoding for BIO_ZONE commands.

sys/geom/geom_subr.c:
	Add DDB command decoding for BIO_ZONE commands.

sys/kern/subr_devstat.c:
	Record statistics for REPORT ZONES commands.  Note that the
	number of bytes transferred for REPORT ZONES won't quite match
	what is received from the harware.  This is because we're
	necessarily counting bytes coming from the da(4) / ada(4) drivers,
	which are using the disk_zone.h interface to communicate up
	the stack.  The structure sizes it uses are slightly different
	than the SCSI and ATA structure sizes.

sys/sys/ata.h:
	Add many bit and structure definitions for ZAC, NCQ, and EPC
	command support.

sys/sys/bio.h:
	Convert the bio_cmd field to a straight enumeration.  This will
	yield more space for additional commands in the future.  After
	change r297955 and other related changes, this is now possible.
	Converting to an enumeration will also prevent use as a bitmask
	in the future.

sys/sys/disk.h:
	Define the DIOCZONECMD ioctl.

sys/sys/disk_zone.h:
	Add a new API for managing zoned disks.  This is very close to
	the SCSI ZBC and ATA ZAC standards, but uses integers in native
	byte order instead of big endian (SCSI) or little endian (ATA)
	byte arrays.

	This is intended to offer to the complete feature set of the ZBC
	and ZAC disk management without requiring the application developer
	to include SCSI or ATA headers.  We also use one set of headers
	for ioctl consumers and kernel bio-level consumers.

sys/sys/param.h:
	Bump __FreeBSD_version for sys/bio.h command changes, and inclusion
	of SMR support.

usr.sbin/Makefile:
	Add the zonectl utility.

usr.sbin/diskinfo/diskinfo.c
	Add disk zoning capability to the 'diskinfo -v' output.

usr.sbin/zonectl/Makefile:
	Add zonectl makefile.

usr.sbin/zonectl/zonectl.8
	zonectl(8) man page.

usr.sbin/zonectl/zonectl.c
	The zonectl(8) utility.  This allows managing SCSI or ATA zoned
	disks via the disk_zone.h API.  You can report zones, reset write
	pointers, get parameters, etc.

Sponsored by:	Spectra Logic
Differential Revision:	https://reviews.freebsd.org/D6147
Reviewed by:	wblock (documentation)
2016-05-19 14:08:36 +00:00
Glen Barber
406d87b1c3 Explicitly add more files to the 'runtime' package.
Sponsored by:	The FreeBSD Foundation
2016-02-09 20:19:31 +00:00
Kenneth D. Merry
5672fac935 Add support for reading MAM attributes to camcontrol(8) and libcam(3).
MAM is Medium Auxiliary Memory and is most commonly found as flash
chips on tapes.

This includes support for reading attributes and decoding most
known attributes, but does not yet include support for writing
attributes or reporting attributes in XML format.

libsbuf/Makefile:
	Add subr_prf.c for the new sbuf_hexdump() function.  This
	function is essentially the same function.

libsbuf/Symbol.map:
	Add a new shared library minor version, and include the
	sbuf_hexdump() function.

libsbuf/Version.def:
	Add version 1.4 of the libsbuf library.

libutil/hexdump.3:
	Document sbuf_hexdump() alongside hexdump(3), since it is
	essentially the same function.

camcontrol/Makefile:
	Add attrib.c.

camcontrol/attrib.c:
	Implementation of READ ATTRIBUTE support for camcontrol(8).

camcontrol/camcontrol.8:
	Document the new 'camcontrol attrib' subcommand.

camcontrol/camcontrol.c:
	Add the new 'camcontrol attrib' subcommand.

camcontrol/camcontrol.h:
	Add a function prototype for scsiattrib().

share/man/man9/sbuf.9:
	Document the existence of sbuf_hexdump() and point users to
	the hexdump(3) man page for more details.

sys/cam/scsi/scsi_all.c:
	Add a table of known attributes, text descriptions and
	handler functions.

	Add a new scsi_attrib_sbuf() function along with a number
	of other related functions that help decode attributes.

	scsi_attrib_ascii_sbuf() decodes ASCII format attributes.

	scsi_attrib_int_sbuf() decodes binary format attributes, and
	will pass them off to scsi_attrib_hexdump_sbuf() if they're
	bigger than 8 bytes.

	scsi_attrib_vendser_sbuf() decodes the vendor and drive
	serial number attribute.

	scsi_attrib_volcoh_sbuf() decodes the Volume Coherency
	Information attribute that LTFS writes out.

sys/cam/scsi/scsi_all.h:
	Add a number of attribute-related structure definitions and
	other defines.

	Add function prototypes for all of the functions added in
	scsi_all.c.

sys/kern/subr_prf.c:
	Add a new function, sbuf_hexdump().  This is the same as
	the existing hexdump(9) function, except that it puts the
	result in an sbuf.

	This also changes subr_prf.c so that it can be compiled in
	userland for includsion in libsbuf.

	We should work to change this so that the kernel hexdump
	implementation is a wrapper around sbuf_hexdump() with a
	statically allocated sbuf with a drain.  That will require
	a drain function that goes to the kernel printf() buffer
	that can take a non-NUL terminated string as input.
	That is because an sbuf isn't NUL-terminated until it is
	finished, and we don't want to finish it while we're still
	using it.

	We should also work to consolidate the userland hexdump and
	kernel hexdump implemenatations, which are currently
	separate.  This would also mean making applications that
	currently link in libutil link in libsbuf.

sys/sys/sbuf.h:
	Add the prototype for sbuf_hexdump(), and add another copy
	of the hexdump flag values if they aren't already defined.

	Ideally the flags should be defined in one place but the
	implemenation makes it difficult to do properly.  (See
	above.)

Sponsored by:	Spectra Logic Corporation
MFC after:	1 week
2015-06-09 21:39:38 +00:00
Baptiste Daroussin
13eb765f2d Convert sbin/ to LIBADD
Reduce overlinking
2014-11-25 11:23:12 +00:00
Kenneth D. Merry
08df2e3eaf Add persistent reservation support to camcontrol(8).
camcontrol(8) now supports a new 'persist' subcommand that allows users to
issue SCSI PERSISTENT RESERVE IN / OUT commands.

sbin/camcontrol/Makefile:
	Add persist.c.

sbin/camcontrol/persist.c:
	New persistent reservation support for camcontrol(8).

	We have support for all known operation modes for PERSISTENT RESERVE
	IN and PERSISTENT RESERVE OUT.
	exceptions noted above.

sbin/camcontrol/camcontrol.8:
	Document the new 'persist' subcommand.

	In the section on the Transport ID (-I) option, explain what
	Transport IDs for each protocol should look like.  At some point
	some of this information could probably get moved off in a
	separate man page, either on Transport IDs alone or a man page
	documenting the Transport ID parsing code.

	Add a number of examples of persistent reservation commands.
	Persistent Reservations are complex enough that the average user
	probably won't be able to get the commands exactly right by just
	reading the man page.  These examples show a few basic and
	advanced examples of how to use persistent reservations.

sbin/camcontrol/camcontrol.h:
	Move the definition for camcontrol_optret here, so we can use it
	for the persistent reservation code.

	Add a definition for the new scsipersist() function.

sbin/camcontrol/camcontrol.c:
	Add 'persist' to the list of subcommands.

	Document 'persist' in the help text.

sys/cam/scsi/scsi_all.c:
	Add the scsi_persistent_reserve_in() and
	scsi_persistent_reserve_out() CCB building functions.

	Add a new function, scsi_transportid_sbuf().  This takes a
	SCSI Transport ID (documented in SPC-4), and prints it to
	an sbuf(9).  There are some transports (like ATA, USB, and
	SSA) for which there is no transport defined.  We need to
	come up with a reasonable thing to do if we're presented
	with a Transport ID that claims to be for one of those
	protocols.

	Add new routines scsi_get_nv() and scsi_nv_to_str().

	These functions do a table lookup to go between a string and an
	integer.  There are lots of table lookups needed in the
	persistent reservation code in camcontrol(8).

	Add a new function, scsi_parse_transportid(), along with leaf node
	functions to parse:
	FC, 1394 and SAS (scsi_parse_transportid_64bit())
	iSCSI (scsi_parse_transportid_iscsi())
	SPI (scsi_parse_transportid_spi())
	RDMA (scsi_parse_transportid_rdma())
	PCIe (scsi_parse_transportid_sop())

	Transport IDs.  Given a string with the general form proto,id these
	functions create a SCSI Transport ID structure.

sys/cam/scsi/scsi_all.h:
	Update the various persistent reservation data structures to
	SPC4r36l, but also rename some fields that were previously
	obsolete with the proper names from older SCSI specs.  This
	allows using older, obsolete persistent reservation types when
	desired.

	Add function prototypes for the new persistent reservation CCB
	building functions.

	Add a data strucure for the READ FULL STATUS service action
	of the PERSISTENT RESERVE IN command.

	Add Transport ID structures for all protocols described in SPC-4.

	Add a new series of SCSI_PROTO_XXX definitions, and
	redefine other defines in terms of these new definitions.

	Add a prototype for scsi_transportid_sbuf().

	Change a couple of "obsolete" persistent reservation data
	structure fields into something more meaningful, based on
	what the field was called when it was defined in the spec.
	(e.g. SPC, SPC-2, etc.)

	Create a new define, SPRI_MAX_LEN, for the maximum allocation
	length allowed for the PERSISTENT RESERVE IN command.

	Add data structures and enumerations for the new name/value
	translation functions.

	Add data structures for SCSI over PCIe Routing IDs.

	Bring the PERSISTENT RESERVE OUT Register and Move parameter list
	structure (struct scsi_per_res_out_parms) up to date with SPC-4.

	Add a data structure for the transport IDs that can optionally be
	appended to the basic PERSISTENT RESERVE OUT parameter list.

	Move SCSI protocol macro definitions out of the VPD page 0x83
	definition and combine them with the more up to date protocol
	definitions higher in the file.

	Add function prototypes for scsi_nv_to_str(), scsi_get_nv(),
	scsi_parse_transportid_64bit(), scsi_parse_transportid_spi(),
	scsi_parse_transportid_rdma(), scsi_parse_transportid_iscsi(),
	scsi_parse_transportid_sop(), and scsi_parse_transportid().

Sponsored by:	Spectra Logic Corporation
MFC after:	1 week
2014-07-03 23:09:44 +00:00
Scott Long
3ff78f8218 Update the 'fwdownload' command to also flash disks connected over an
ATA/SATA transport.  The detection logic is automatic, so it should Just
Work.  While here, also improve the progress meter that is displayed
during firmware download.

Submitted by:	Alistair Crooks
Obtained from:	Netflix, Inc.
MFC after:	3 days
2012-06-20 00:17:29 +00:00
Yoshihiro Takahashi
506bccaff6 Fix build when RELEASE_CRUNCH is defined. 2012-01-29 09:12:34 +00:00
Ed Maste
1f4782a4c1 Add firmware update support for SCSI devices.
Firmware can be reprogrammed on devices from Hitachi, HP, IBM, Plextor,
Quantum, and Seagate.  At least one device from each manufacturer has
been tested with some version of this code, and it has been used to
update thousands of drives so far.

The man page suggests having a backup of the drive's data, and the
operation must be confirmed, either interactively or on the command
line.  (This is the same as the confirmation on the format command.)

This work is largely derived from fwprog.c by Andre Albsmeier.

Submitted by:	Nima Misaghian
Sponsored by:	Sandvine Incorporated
MFC after:	3 months
2011-11-25 04:03:37 +00:00
Warner Losh
25faff346c MFtbemd:
Prefer MACHNE_CPUARCH to MACHINE_ARCH in most contexts where you want
to test of all the CPUs of a given family conform.
2010-08-23 22:24:11 +00:00
Ruslan Ermilov
106d839190 Switch the default WARNS level for sbin/ to 6.
Submitted by:	Ulrich Spörlein
2009-10-19 16:00:24 +00:00
Kenneth D. Merry
f553b7b391 Add SCSI READ CAPACITY support to camcontrol. The new 'readcap' subcommand
will automatically issue the 16 byte verison of read capacity if the device
in question is larger than 2TB.

There are also a number of output options here (last block, number of
blocks, human readable) that should meet most needs, and also aid in
scripting.

Approved by:	re (bmah)
MFC after:	1 week
2007-09-08 20:24:12 +00:00
Olivier Houchard
c1b2de5af0 Use WARNS?=3 for these in the arm case for now, due to toolchain issues. 2004-05-14 13:31:21 +00:00
Johan Karlsson
398676131f Make this WARNS=6 clean by:
1: add 'const' to char * where needed;
 2: mark unused variables with __unused;
 3: remove double prototypes for mode_edit and mode_list.
 4: moves the global variables 'bus', 'target', and 'lun' into
        the main function and protect them with #ifndef MINIMALISTIC,
 5: renames 3 variable in order not to shadow other things
        index -> indx -- in modepage_dump since index is a function
		from <strings.h.>
        arglist -> arglst -- in the function parse_btl since arglist
                is also a global variable
        convertend -> convertend2 -- in the function editentry_set
                since that name is used two times within the function.
 6: cast 0xffffffff in the macro RESOLUTION_MAX(size) to (int)
        since it is unsigned otherwise.

Tested by:	make universe
Approved by:	ken
2003-08-05 09:19:07 +00:00
Kenneth D. Merry
50a7fdaed8 Remove MAINTAINER= lines in the makefiles for camcontrol, iostat, libcam
and libdevstat, since the new way of doing things is to just list
maintainership in src/MAINTAINERS.

Also, remove duplicate entries in src/MAINTAINERS for those utilities.  I
already had entries for them.
2003-06-14 05:28:01 +00:00
David E. O'Brien
8e7d2436a1 Set WARNS=1. RESOLUTION_MAX macro has major signed/unsigned issues. 2003-05-02 06:56:32 +00:00
Johan Karlsson
c7cf7aa684 Make camcontrol WARNS=2 clean.
Approved by:	ken
2003-02-20 21:07:59 +00:00
Ruslan Ermilov
485318d4d8 Style.
Approved by:	ken
2002-01-24 16:53:08 +00:00
Joerg Wunsch
075828a91a Well, RELEASE_BUILD_FIXIT has now been renamed into RELEASE_CRUNCH.
At least, the old version is still good for the MFC though (where
everything is still going the old way). ;-)
2002-01-18 22:17:35 +00:00
Joerg Wunsch
6437601ca1 Provide an option to make camcontrol `minimalistic': if the (env/make)
variable RELEASE_BUILD_FIXIT is defined, a camcontrol binary will be
built that only knows the "rescan" and "reset" subcommands.  The
resulting code is small enough to still fit onto the boot floppy.

Reviewed by:	ken
MFC after:	1 week
2002-01-17 20:26:14 +00:00
David E. O'Brien
2d68bf45bf Default to WARNS=2.
Binary builds that cannot handle this must explicitly set WARNS=0.

Reviewed by:	mike
2001-12-04 02:19:58 +00:00
Kenneth D. Merry
3393f8daa3 Rewrite of the CAM error recovery code.
Some of the major changes include:

	- The SCSI error handling portion of cam_periph_error() has
	  been broken out into a number of subfunctions to better
	  modularize the code that handles the hierarchy of SCSI errors.
	  As a result, the code is now much easier to read.

	- String handling and error printing has been significantly
	  revamped.  We now use sbufs to do string formatting instead
	  of using printfs (for the kernel) and snprintf/strncat (for
	  userland) as before.

	  There is a new catchall error printing routine,
	  cam_error_print() and its string-based counterpart,
	  cam_error_string() that allow the kernel and userland
	  applications to pass in a CCB and have errors printed out
	  properly, whether or not they're SCSI errors.  Among other
	  things, this helped eliminate a fair amount of duplicate code
	  in camcontrol.

	  We now print out more information than before, including
	  the CAM status and SCSI status and the error recovery action
	  taken to remedy the problem.

	- sbufs are now available in userland, via libsbuf.  This
	  change was necessary since most of the error printing code
	  is shared between libcam and the kernel.

	- A new transfer settings interface is included in this checkin.
	  This code is #ifdef'ed out, and is primarily intended to aid
	  discussion with HBA driver authors on the final form the
	  interface should take.  There is example code in the ahc(4)
	  driver that implements the HBA driver side of the new
	  interface.  The new transfer settings code won't be enabled
	  until we're ready to switch all HBA drivers over to the new
	  interface.

src/Makefile.inc1,
lib/Makefile:		Add libsbuf.  It must be built before libcam,
			since libcam uses sbuf routines.

libcam/Makefile:	libcam now depends on libsbuf.

libsbuf/Makefile:	Add a makefile for libsbuf.  This pulls in the
			sbuf sources from sys/kern.

bsd.libnames.mk:	Add LIBSBUF.

camcontrol/Makefile:	Add -lsbuf.  Since camcontrol is statically
			linked, we can't depend on the dynamic linker
			to pull in libsbuf.

camcontrol.c:		Use cam_error_print() instead of checking for
			CAM_SCSI_STATUS_ERROR on every failed CCB.

sbuf.9:			Change the prototypes for sbuf_cat() and
			sbuf_cpy() so that the source string is now a
			const char *.  This is more in line wth the
			standard system string functions, and helps
			eliminate warnings when dealing with a const
			source buffer.

			Fix a typo.

cam.c:			Add description strings for the various CAM
			error status values, as well as routines to
			look up those strings.

			Add new cam_error_string() and
			cam_error_print() routines for userland and
			the kernel.

cam.h:			Add a new CAM flag, CAM_RETRY_SELTO.

			Add enumerated types for the various options
			available with cam_error_print() and
			cam_error_string().

cam_ccb.h:		Add new transfer negotiation structures/types.

			Change inq_len in the ccb_getdev structure to
			be "reserved".  This field has never been
			filled in, and will be removed when we next
			bump the CAM version.

cam_debug.h:		Fix typo.

cam_periph.c:		Modularize cam_periph_error().  The SCSI error
			handling part of cam_periph_error() is now
			in camperiphscsistatuserror() and
			camperiphscsisenseerror().

			In cam_periph_lock(), increase the reference
			count on the periph while we wait for our lock
			attempt to succeed so that the periph won't go
			away while we're sleeping.

cam_xpt.c:		Add new transfer negotiation code.  (ifdefed
			out)

			Add a new function, xpt_path_string().  This
			is a string/sbuf analog to xpt_print_path().

scsi_all.c:		Revamp string handing and error printing code.
			We now use sbufs for much of the string
			formatting code.  More of that code is shared
			between userland the kernel.

scsi_all.h:		Get rid of SS_TURSTART, it wasn't terribly
			useful in the first place.

			Add a new error action, SS_REQSENSE.  (Send a
			request sense and then retry the command.)
			This is useful when the controller hasn't
			performed autosense for some reason.

			Change the default actions around a bit.

scsi_cd.c,
scsi_da.c,
scsi_pt.c,
scsi_ses.c:		SF_RETRY_SELTO -> CAM_RETRY_SELTO.  Selection
			timeouts shouldn't be covered by a sense flag.

scsi_pass.[ch]:		SF_RETRY_SELTO -> CAM_RETRY_SELTO.

			Get rid of the last vestiges of a read/write
			interface.

libkern/bsearch.c,
sys/libkern.h,
conf/files:		Add bsearch.c, which is needed for some of the
			new table lookup routines.

aic7xxx_freebsd.c:	Define AHC_NEW_TRAN_SETTINGS if
			CAM_NEW_TRAN_CODE is defined.

sbuf.h,
subr_sbuf.c:		Add the appropriate #ifdefs so sbufs can
			compile and run in userland.

			Change sbuf_printf() to use vsnprintf()
			instead of kvprintf(), which is only available
			in the kernel.

			Change the source string for sbuf_cpy() and
			sbuf_cat() to be a const char *.

			Add __BEGIN_DECLS and __END_DECLS around
			function prototypes since they're now exported
			to userland.

kdump/mkioctls:		Include stdio.h before cam.h since cam.h now
			includes a function with a FILE * argument.

Submitted by:	gibbs (mostly)
Reviewed by:	jdp, marcel (libsbuf makefile changes)
Reviewed by:	des (sbuf changes)
Reviewed by:	ken
2001-03-27 05:45:52 +00:00
Ruslan Ermilov
0a5779d45b - Backout botched attempt to introduce MANSECT feature.
- MAN[1-9] -> MAN.
2001-03-26 14:33:27 +00:00
Ruslan Ermilov
fe655281c5 Set the default manual section for sbin/ to 8. 2001-03-20 18:13:31 +00:00
Kelly Yancey
7e32b20d95 This is an overhaul of the mode page handling in camcontrol as well as
related patches. These include:
	* Mode page editting can be scripted. This involves two
	  things: first, if stdin is not a tty, changes are read from
	  stdin rather than invoking $EDITOR. Second, and more
	  importantly, not all modepage entries must be included in the
	  change set. This means that camcontrol can now gracefully handle
	  more intrusive editting from the $EDITOR, including removal or
	  rearrangement of lines. It also means that you can do stuff
	  like:
		# echo "WCE: 1" | camcontrol modepage da3 -m 8 -e
		# newfs /dev/da3
		# echo "WCE: 0" | camcontrol modepage da3 -m 8 -e
	* Range-checking on user-supplied input values. modeedit.c now
	  uses the field width specifiers to determine the maximum
	  allowable value for a field. If the user enters a value larger
	  than the maximum, it clips the value to the max and warns the
	  user. This also involved patching cam_cmdparse.c to be more
	  consistent with regards to the "count" parameter to arg_put
	  (previously is was the length of strings and 1 for all integral
	  types). The cam_cdbparse(3) man page was also updated to reflect
	  the revised semantics.
	* In the process, I removed the 64 entry limit on mode pages (not
	  that we were even close to hitting that limit). This was a nice
	  side-effect of the other changes.
	* Technically, the new mode editting functionality allows editting
	  of character array entries in mode pages (type 'c' or 'z'),
	  however since buff_encode doesn't grok them it is currently
	  useless.
	* Camcontrol gained two new options related to mode pages: -l and
	  -b. The former lists all available mode pages for a given
	  device. The latter forces mode page display in binary format
	  (the default when no mode page definition was found in
	  scsi_modes).
	* Added support for mode page names to scsi_modes. Allows names to
	  be displayed alongside mode numbers in the mode page
	  listing. Updated scsi_modes to use the new functionality. This
	  also adds the semicolon into the scsi_modes syntax as an
	  optional mode page definition terminator. This is needed to name
	  pages without providing a page format definition.
	* Updated scsi_all.h to include a structure describing mode page
	  headers.
	* Added $FreeBSD$ line to scsi_modes.

Inspired by:	dwhite
Reviewed by:	ken
2000-08-08 06:24:17 +00:00
Matt Jacob
cfe090e1fa Specify the system directory for which we put in our include path
as a separate line so we can override it on the command line if
we need to.

Reviewed by:	ken@freebsd.org
2000-01-21 23:18:08 +00:00
Kenneth D. Merry
7c903b3d7e Add a MAINTAINER line to modules that I maintain.
Suggested by:	brian, markm
1999-06-18 00:41:47 +00:00
Justin T. Gibbs
525689f102 Camcontrol - A utility for configuring/manipulating the CAM subsystem
Submitted by:	"Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 06:43:02 +00:00