Recent HAL change preparing to support ENAv2 required minor driver
modifications.
The ena_com_sq_empty_space() is not available in this ena-com, so it had
to be replaced with ena_com_free_desc().
Moreover, the ena_com_admin_init() is no longer using 3rd argument
indicating if the spin lock should be initialized, so it was removed.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
This allows replacing "sys/eventfilter.h" includes with "sys/_eventfilter.h"
in other header files (e.g., sys/{bus,conf,cpu}.h) and reduces header
pollution substantially.
EVENTHANDLER_DECLARE and EVENTHANDLER_LIST_DECLAREs were moved out of .c
files into appropriate headers (e.g., sys/proc.h, powernv/opal.h).
As a side effect of reduced header pollution, many .c files and headers no
longer contain needed definitions. The remainder of the patch addresses
adding appropriate includes to fix those files.
LOCK_DEBUG and LOCK_FILE_LINE_ARG are moved to sys/_lock.h, as required by
sys/mutex.h since r326106 (but silently protected by header pollution prior
to this change).
No functional change (intended). Of course, any out of tree modules that
relied on header pollution for sys/eventhandler.h, sys/lock.h, or
sys/mutex.h inclusion need to be fixed. __FreeBSD_version has been bumped.
This is a prerequisite of unifying kernel zlib instances.
Submitted by: Yoshihiro Ota <ota at j.email.ne.jp>
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D20191
One of the fun issues with scanning has been how the existing
ANI values were programmed into the hardware when channels were
changed. If you're on a really crappy channel and ANI has made
you deaf then when you scan you continue to be deaf on all channels.
This code passes in a flag to startpcureceive which in AR5416 and later
is also used to enable ANI. This allows it to know if it's a normal
operation or a scan operation.
This fixes my situation at home where a temporary spot of a device
going deaf due to interference starts scanning and .. can't hear
anything until I restart.
Now, this isn't the full fix - ideally:
(a) all the ANI config and per-channel information would be migrated
to the shared HAL stuff and enabled for all of the NICs;
(b) when a station reassociates and some other error conditions
(like missed beacons, NF calibration failures, etc) a knob
to reset ANI parameters would likely help recovery.
But hey, I'm committing bits of code again! woo!
Tested:
* AR9344 (2G), STA operation
When building libnv without a debug those arguments are no longer used
because assertions will be changed to NOP.
Submitted by: Mindaugas Rasiukevicius <rmind@netbsd.org>
MFC after: 2 weeks
When building libnv without a debug those arguments are no longer used
because assertions will be changed to NOP.
Submitted by: Mindaugas Rasiukevicius <rmind@netbsd.org>
MFC after: 2 weeks
The drivers were removed in r344299 so there is no need to keep the
firmware files in the src tree.
Reviewed by: imp, jhibbits, johalun
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19583
Embedded lzma decompression library becomes a module usable by other
consumers, in addition to geom_uzip.
Most important code changes are
- removal of XZ_DEC_SINGLE define, we need the code to work
with XZ_DEC_DYNALLOC;
- xz_crc32_init() call is removed from geom_uzip, xz module handles
initialization on its own.
xz is no longer embedded into geom_uzip, instead the depend line for
the module is provided, and corresponding kernel option is added to
each MIPS kernel config file using geom_uzip.
The commit also carries unrelated cleanup by removing excess "device geom_uzip"
in places which were missed in r344479.
Reviewed by: cem, hselasky, ray, slavash (previous versions)
Sponsored by: Mellanox Technologies
Differential revision: https://reviews.freebsd.org/D19266
MFC after: 3 weeks
In r343986 we introduced a double free. The structure was already
freed fixed in the r302966. This problem was introduced
because the GitHub version was out of sync with the FreeBSD one.
Submitted by: Mindaugas Rasiukevicius <rmind@netbsd.org>
MFC with: r343986
nvpair_create_stringv: free the temporary string; this fix affects
nvlist_add_stringf() and nvlist_add_stringv().
nvpair_remove_nvlist_array (NV_TYPE_NVLIST_ARRAY case): free the chain
of nvpairs (as resetting it prevents nvlist_destroy() from freeing it).
Note: freeing the chain in nvlist_destroy() is not sufficient, because
it would still leak through nvlist_take_nvlist_array(). This affects
all nvlist_*_nvlist_array() use
Submitted by: Mindaugas Rasiukevicius <rmind@netbsd.org>
Reported by: clang/gcc ASAN
MFC after: 2 weeks
never get here, however a test for SOLARIS, as redundant as this test is,
serves to document that this is the illumos definition. This should help
those who come after me to follow the code more easily.
MFC after: 1 month
Remove #ifdefs for ancient and irrelevant operating systems from
ipfilter.
When ipfilter was written the UNIX and UNIX-like systems in use
were diverse and plentiful. IRIX, Tru64 (OSF/1) don't exist any
more. OpenBSD removed ipfilter shortly after the first time the
ipfilter license terms changed in the early 2000's. ipfilter on AIX,
HP/UX, and Linux never really caught on. Removal of code for operating
systems that ipfilter will never run on again will simplify the code
making it easier to fix bugs, complete partially implemented features,
and extend ipfilter.
Unsupported previous version FreeBSD code and some older NetBSD code
has also been removed.
What remains is supported FreeBSD, NetBSD, and illumos. FreeBSD and
NetBSD have collaborated exchanging patches, while illumos has expressed
willingness to have their ipfilter updated to 5.1.2, provided their
zone-specific updates to their ipfilter are merged (which are of interest
to FreeBSD to allow control of ipfilters in jails from the global zone).
Reviewed by: glebius@
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D19006
The KPI have been reviewed and cleansed of features that were planned
back 20 years ago and never implemented. The pfil(9) internals have
been made opaque to protocols with only returned types and function
declarations exposed. The KPI is made more strict, but at the same time
more extensible, as kernel uses same command structures that userland
ioctl uses.
In nutshell [KA]PI is about declaring filtering points, declaring
filters and linking and unlinking them together.
New [KA]PI makes it possible to reconfigure pfil(9) configuration:
change order of hooks, rehook filter from one filtering point to a
different one, disconnect a hook on output leaving it on input only,
prepend/append a filter to existing list of filters.
Now it possible for a single packet filter to provide multiple rulesets
that may be linked to different points. Think of per-interface ACLs in
Cisco or Juniper. None of existing packet filters yet support that,
however limited usage is already possible, e.g. default ruleset can
be moved to single interface, as soon as interface would pride their
filtering points.
Another future feature is possiblity to create pfil heads, that provide
not an mbuf pointer but just a memory pointer with length. That would
allow filtering at very early stages of a packet lifecycle, e.g. when
packet has just been received by a NIC and no mbuf was yet allocated.
Differential Revision: https://reviews.freebsd.org/D18951
length of the struct in memmove() rather than an unintialized variable.
This fixes the first of two kernel page faults when ipfs is invoked.
PR: 235110
Reported by: David.Boyd49@twc.com
MFC after: 2 weeks
Book-E powerpc uses 64-bit vm_paddr_t, and 32-bit powerpc has 32-bit pointers,
so gcc errors with cast to pointer from integer of different size. As this will
not actually be used in reality anyway, simply quiet the warning by casting
through uintptr_t.
MFC after: 3 weeks
MFC with: r343168
sendfile(2) appears to now use DMAP wherever possible. These addresses are not
managed by pmap, so pmap_kextract() returns a 0 physical address, causing
failure.
This change fixes nginx running on P5020 SoC.
MFC after: 3 weeks
In FreeBSD, this is normal situation that the Tx ring is being full. In
hat case, the packet is put back into drbr and the next attempt to send
it is taken after the cleanup.
Too much logs like this can cause system instability and even cause the
device reset (because keep alive or cleanup could be missed).
To fix that, the log level of this message is changed to debug.
Upon this change upgrade the driver version to v0.8.2.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
This merge brings in a couple new files, which needed to be attached to the
build; a new dependency on <limits.h>, which must be stubbed; and a name
change in the Context parameter constants, from ZSTD_p_foo to ZSTD_c_foo.
Significantly, it fixes a kernel build error with GCC where floating-point
functions were included in the kernel build, by hiding them under the same
compile-time #ifdef that already covered their invocation. That issue was
introduced to FreeBSD in the 1.3.7 update and tracked upstream here:
https://github.com/facebook/zstd/issues/1386
The full 1.3.8 release notes can be found on Github:
https://github.com/facebook/zstd/releases/tag/v1.3.8
Relnotes: yes
