Again motivated by upcoming work to rewrite a bunch of this- single-letter
variable names and slightly misleading variable names ("lastmatches" to
indicate that the last matched) are not helpful.
(or peel off the band-aid, whatever floats your boat)
This addresses two separate issues:
1.) Nothing within bsdgrep actually knew whether it cared about line numbers
or not.
2.) The file layer knew nothing about the context in which it was being
called.
#1 is only important when we're *not* processing line-by-line. #2 is
debatably a good idea; the parsing context is only handy because that's
where we store current offset information and, as of this commit, whether or
not it needs to be line-aware.
Admittedly, this is a clang-scan complaint... but it wasn't wrong. fts_flags
is initialized by all cases in the switch(), which should be fairly obvious.
Annotate this anyways.
Neither procfile nor grep_tree return anything meaningful to their callers.
None of the callers actually care about how many lines were matched in all
of the files they processed; it's all about "did anything match?"
This is generally just a light refactoring to remind me of what actually
matters as I'm rewriting these bits to care less about 'stuff'.
GNU grep as in actually in base does not have any translations support
compiled in, so no functionnality loss.
We do support 193 locales in base, we will never catch up on that number of
translation with bsd grep.
Removing NLS support make bsd grep consistent with the other binaries in base
which are not translated, and also reduce a little bit the code.
Reviewed by: kevans
Approved by: kevans
Discussed with: kevans @BSDCan
Differential Revision: https://reviews.freebsd.org/D15682
It was an old TRE that had plenty of bugs and no performance gain over
regex(3). I disabled it by default in r323615, and there was some confusion
about what the knob does- likely due to poor naming on my part- to the tune
of "well, it sounds like it should speed things up" (mentioned by multiple
people).
To compound this, I have no intention of maintaining a second regex
implementation. If someone would like to step up and volunteer to maintain a
lean-and-mean implementation for grep, this is OK, but we have very few
volunteers to maintain even our primary regex implementation.
Prior to r332851:
* --exclude always win out over --include
* --exclude-dir always wins out over --include-dir
r332851 broke that behavior, resulting in:
* First of --exclude, --include wins
* First of --exclude-dir, --include-dir wins
As it turns out, both behaviors are wrong by modern grep standards- the
latest rule wins. e.g.:
`grep --exclude foo --include foo 'thing' foo`
foo is included
`grep --include foo --exclude foo 'thing' foo`
foo is excluded
As tested with GNU grep 3.1.
This commit makes bsdgrep follow this behavior.
Reported by: se
There's no point checking for a bunch of file modes if we're not a
practicing believer of DIR_SKIP or DEV_SKIP.
This also reduces some style violations that were particularly ugly looking
when browsing through.
Split the matching and non-matching cases out into their own functions to
reduce future complexity. As the name implies, procmatches will eventually
process more than one match itself in the future.
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
No functional change intended.
fgrep/grep -F will error out at runtime if compiled with a regex(3)
that does not define REG_NOSPEC or REG_LITERAL. glibc is one such regex(3)
implementation, and as it turns out they don't support literal matching at
all.
Provide a primitive literal matcher for use with glibc and other
implementations that don't support literal matching so that we don't
completely lose fgrep/grep -F if compiled against libgnuregex on stable/10,
stable/11, or other systems that we don't necessarily support.
This is a wholly unoptimized implementation with no plans to optimize it as
of now. This is due to both its use-case being primarily on unsupported
systems in the near-distant future and that it's reinventing the wheel that
we already have available as a feature of regex(3).
Reviewed by: cem, emaste, ngie
Approved by: emaste (mentor)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D12056
Given an empty pattern (i.e. grep "" A B), bsdgrep(1) would previously exit()
with the appropriate exit code upon encountering an empty file. Likely intended
as an optimization, but this behavior is technically incorrect since an empty
pattern should match every line.
PR: 220924
Reviewed by: emaste, cem (earlier version), ngie
Approved by: emaste (mentor)
Differential Revision: https://reviews.freebsd.org/D11698
The following changes have been made over the last couple of months:
Features:
- With bsdgrep -r, the working directory is implied if no directory is
specified
- bsdgrep will now behave as bsdgrep -r does when it's named rgrep
- bsdgrep now understands -z/--null-data to use \0 as EOL
- GNU regex compatibility is now indicated with a "GNU compatible" in
the version string
Fixes:
- --mmap no longer hangs when coming across an EOF without an
accompanying EOL
- -o/--color matching generally improved, now produces earliest /
longest matches
- Context output now more closely aligns with GNU grep
- Zero-length matches no longer exhibit broken behavior
- Every output line now honors -b/-H/-n flags
Tests have been added for previous regressions as well as other
previously untested behaviors.
Various other fixes have been commited, and refactoring for further /
later improvements has taken place.
(The original submission changed the version string to 2.5.2, but I
decided to use 2.6.0 to reflect the addition of new features.)
Submitted by: Kyle Evans <kevans91@ksu.edu>
Differential Revision: https://reviews.freebsd.org/D10982
Correct a couple of minor BSD grep assumptions that are valid for line
processing but not future chunk-based processing.
Submitted by: Kyle Evans <kevans91@ksu.edu>
Reviewed by: bapt, cem
Differential Revision: https://reviews.freebsd.org/D10824
Metadata printing with -b, -H, or -n flags suffered from a few flaws:
1) -b/offset printing was broken when used in conjunction with -o
2) With -o, bsdgrep did not print metadata for every match/line, just
the first match of a line
3) There were no tests for this
Address these issues by outputting this data per-match if the -o flag is
specified, and prior to outputting any matches if -o but not --color,
since --color alone will not generate a new line of output for every
iteration over the matches.
To correct -b output, fudge the line offset as we're printing matches.
While here, make sure we're using grep_printline in -A context. Context
printing should *never* look at the parsing context, just the line.
The tests included do not pass with gnugrep in base due to it exhibiting
similar quirky behavior that bsdgrep previously exhibited.
Submitted by: Kyle Evans <kevans91@ksu.edu>
Reviewed by: cem
Differential Revision: https://reviews.freebsd.org/D10580
We should not set an arbitrary cap on the number of matches on a line,
and in any case MAX_LINE_MATCHES of 32 is much too low. Instead, if we
match more than MAX_LINE_MATCHES, keep processing and matching from the
last match until all are found.
For the regression test, we produce 4096 matches (larger than we expect
we'll ever set MAX_LINE_MATCHES) and make sure we actually get 4096
lines of output with the -o flag.
We'll also make sure that every distinct line is getting its own line
number to detect line metadata not being printed as appropriate along
the way.
PR: 218811
Submitted by: Kyle Evans <kevans91@ksu.edu>
Reported by: jbeich
Reviewed by: cem
Differential Revision: https://reviews.freebsd.org/D10577
Previously, when given a negative -A/-B/-C argument bsdgrep would
overflow the respective context flag(s) and exhibited surprising
behavior.
Fix this by removing unsignedness of Aflag/Bflag and erroring out if
we're given a value < 0. Also adjust the type used to track 'tail'
context in procfile() so that it accurately reflects the Aflag value
rather than overflowing and losing trailing context.
This also fixes an inconsistency previously existing between -n and
-C "n" behavior. They are now both limited to LLONG_MAX, to be
consistent.
Add some test cases to make sure grep errors out properly for both
negative context values as well as non-numeric context values rather
than giving bogus matches.
Submitted by: Kyle Evans <kevans91@ksu.edu>
Reviewed by: cem
Differential Revision: https://reviews.freebsd.org/D10675
Refactoring done in r317703 broke -c, -l, and -L flags implying
suppression of match printing. Fortunately this is just a matter of not
doing any printing of the resulting matches and context printing was not
broken in this refactoring.
Add some regression tests since this area may still see further
refactoring, include different context flags as well even though they
were not broken in this case.
PR: 219077
Submitted by: Kyle kevans91@ksu.edu
Reported by: markj
Reviewed by: cem, ngie
Differential Revision: https://reviews.freebsd.org/D10607
-w flag matching with an empty pattern was generally 'broken', allowing
matches to occur on any line whether or not it actually matches -w
criteria.
This fix required a good amount of refactoring to address. procline()
is altered to *only* process the line and return whether it was a match
or not, necessary to be able to short-circuit the whole function in case
of this matchall flag. -m flag handling is moved out as well because it
suffers from the same fate as context handling if we bypass any actual
pattern matching.
The matching context (matches, mostly) didn't previously exist outside
of procline(), so we go ahead and create context object for file
processing bits to pass around. grep_printline() was created due to
this, for the scenarios where the matches don't actually matter and we
just want to print a line or two, a la flushing the context queue and
no -o or --color specified.
Damage from this broken behavior would have been mitigated by the fact
that it is unlikely users would invoke grep -w with an empty pattern.
This was identified while checking PR 105221 for problems it this may
cause in BSD grep, but PR 105221 is *not* a report of this behavior.
Submitted by: Kyle Evans <kevans91 at ksu.edu>
Differential Revision: https://reviews.freebsd.org/D10433
-w and -v flag matching was mostly functional but had some minor
problems:
1. -w flag processing only allowed one iteration through pattern
matching on a line. This was problematic if one pattern could match
more than once, or if there were multiple patterns and the earliest/
longest match was not the most ideal, and
2. Previous work "fixed" things to not further process a line if the
first iteration through patterns produced no matches. This is clearly
wrong if we're dealing with the more restrictive -w matching.
#2 breakage could have also occurred before recent broad rewrites, but
it would be more arbitrary based on input patterns as to whether or not
it actually affected things.
Fix both of these by forcing a retry of the patterns after advancing
just past the start of the first match if we're doing more restrictive
-w matching and we didn't get any hits to start with. Also move -v flag
processing outside of the loop so that we have a greater change to match
in the more restrictive cases. This wasn't strictly wrong, but it could
be a little more error prone.
While here, introduce some regressions tests for this behavior and fix
some excessive wrapping nearby that hindered readability. GNU grep
passes these new tests.
PR: 218467, 218811
Submitted by: Kyle Evans <kevans91 at ksu.edu>
Reviewed by: cem, ngie
Differential Revision: https://reviews.freebsd.org/D10329
Bugs have been found in the fastmatch implementation as used in bsdgrep.
Some have been fixed (r316495) while fixes for others are in review
(D10098).
In comparison with the fastmatch implementation, Kyle Evans found that:
- regex(3)'s performance with literal expressions offers a speed
improvement over fastmatch
- regex(3)'s performance, both with simple BREs and EREs, seems to be
comparable
The regex implementation was imported in r226035, and the commit message
reports:
This is a temporary solution until the whole regex library is
not replaced so that BSD grep development can continue and the
backported code gets some review and testing. This change only
improves scalability slightly, there is no big performance boost
yet but several minor bugs have been found and fixed.
Introduce a WITH_/WITHOUT_BSD_GREP_FASTMATCH knob to support testing
of both approaches.
PR: 175314, 194823
Submitted by: Kyle Evans <kevans91 at ksu.edu>
Reviewed by: bdrewery (in part)
Differential Revision: https://reviews.freebsd.org/D10282
r316477 broke zero-length matches when not using the -o flag, by
skipping over them entirely.
Add a regression test so that it doesn't break again in the future.
Submitted by: Kyle Evans <kevans91 at ksu.edu>
Reviewed by: cem emaste ngie
Differential Revision: https://reviews.freebsd.org/D10333
Make bsdgrep more sensitive to context overlaps. If it's printing
context that either overlaps or is immediately adjacent to another bit
of context, don't print a separator.
- Non-overlapping segments no longer have two separators between them
- Overlapping segments no longer have separators between them with
overlapping sections repeated
Submitted by: Kyle Evans <kevans91 at ksu.edu>
Reviewed by: cem
Differential Revision: https://reviews.freebsd.org/D10105
This is more sensible than the previous behaviour of grepping stdin,
and matches newer GNU grep behaviour.
PR: 216307
Submitted by: Kyle Evans <kevans91 at ksu.edu>
Reviewed by: cem, emaste, ngie
Relnotes: Yes
Differential Revision: https://reviews.freebsd.org/
-z treats input and output data as sequences of lines terminated by a
zero byte instead of a newline. This brings it more in line with GNU grep
and brings us closer to passing the current tests with BSD grep.
Submitted by: Kyle Evans <kevans91 at ksu.edu>
Reviewed by: cem
Relnotes: Yes
Differential Revision: https://reviews.freebsd.org/D10101
r316477 changed the color output to match exactly the in-tree GNU grep,
but introduces unnecessary escape sequences.
Submitted by: Kyle Evans <kevans91 at ksu.edu>
Reported by: ache
MFC after: 1 month
MFC with: r316477
- Set REG_NOTBOL if we've already matched beginning of line and we're
examining later parts
- For each pattern we examine, apply it to the remaining bits of the
line rather than (potentially) smaller subsets
- Check for REG_NOSUB after we've looked at all patterns initially
matching the line
- Keep track of the last match we made to later determine if we're
simply not matching any longer or if we need to proceed another byte
because we hit a zero-length match
- Match the earliest and longest bit of each line before moving the
beginning of what we match to further in the line, past the end of the
longest match; this generally matches how gnugrep(1) seems to behave,
and seems like pretty good behavior to me
- Finally, bail out of printing any matches if we were set to print all
(empty pattern) but -o (output matches) was set
PR: 195763, 180990, 197555, 197531, 181263, 209116
Submitted by: "Kyle Evans" <kevans91@ksu.edu>
Reviewed by: cem
MFC after: 1 month
Relnotes: Yes
Differential Revision: https://reviews.freebsd.org/D10104
Pull a copy of the filename string before calling basename(). Change the
loop to not return on its own, so we can put a free() statement at the
bottom.
detected.
Certain criteria must be met for this bug to show up:
* the -w flag is specified, and
* neither -o or --color are specified, and
* the pattern is part of another word in the line, and
* the other word that contains the pattern occurs first
PR: 181973
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
backported that was written for the TRE integration project in Google
Summer of Code 2011. This is a temporary solution until the whole
regex library is not replaced so that BSD grep development can continue
and the backported code gets some review and testing. This change only
improves scalability slightly, there is no big performance boost yet
but several minor bugs have been found and fixed.
Approved by: delphij (mentor)
Sposored by: Google Summer of Code 2011
MFC after: 1 week
