Non-tests/... changes:
- Add HAS_TESTS= to Makefiles with libraries and programs to enable iteration
and propagate the appropriate environment down to *.test.mk.
tests/... changes:
- Add appropriate support Makefile.inc's to set HAS_TESTS in a minimal manner,
since tests/... is a special subdirectory tree compared to the others.
MFC after: 2 months
MFC with: r322511
Reviewed by: arch (silence), testing (silence)
Differential Revision: D12014
== Rationale ==
r295380 introduced "make check" and consolidated means for running
test code in an attempt to simplify running tests. One could either
install files/libraries/programs and run "make check", or run "make check"
with an explicit CHECKDIR, e.g., `make check CHECKDIR=$(make -V.OBJDIR)``.
One criticism that was received is that "make check" should be run with
the intent of making dev->test->commit easier, which means that the target
audience's workflow should be developers. One developer pattern available
in other opensource projects is to run test code from a developer sandbox,
instead of installing to a system.
== Method ==
This approach is slightly different from the standard approach, in the sense
that it builds and installs into a deterministic directory under .OBJDIR (as I call it,
the "sandbox"), then runs "make check" against that. In the event the test
run is successful, the deterministic directory is removed to save space.
== Approach ==
bsd.lib.mk, bsd.prog.mk:
To support this functionality, a new variable `HAS_TESTS` is being added.
HAS_TESTS enables appropriate behavior with bsd.lib.mk and bsd.prog.mk, as
follows:
- Add "make check" as an available target from the directory.
- Pass down appropriate variables via ${TESTS_ENV}, i.e.,
${TESTS_LD_LIBRARY_PATH} and ${TESTS_PATH}.
One should add "HAS_TESTS" to directories containing tests in them, e.g. from
bin/sh/Makefile,
HAS_TESTS=
SUBDIR.${MK_TESTS}+= tests
HAS_TESTS doesn't automatically add the tests subdirectory for flexibility
reasons.
bsd.opts.mk, src.opts.mk:
- The knob ${MK_MAKE_CHECK_USE_SANDBOX} has been added, both to explicitly
direct (internally) when to set a deterministic ${DESTDIR} and to also allow
users to disable this behavior globally, i.e., via src.conf.
- MK_TESTS has been promoted from src.opts.mk to bsd.opts.mk to leverage
syntactic sugar for having MK_TESTS be a dependency for
MK_MAKE_CHECK_USE_SANDBOX, but to also ensure that src.opts.mk isn't required
to use suite.test.mk (which is a dependency of bsd.test.mk).
suite.test.mk:
- beforecheck behavior (when MK_MAKE_CHECK_USE_SANDBOX is enabled) is modified
from a no-op to:
-- Build.
-- Run "make hierarchy" on the sandbox dir.
-- Install the tests/files to the sandbox dir.
- aftercheck behavior (when MK_MAKE_CHECK_USE_SANDBOX is enabled) is modified
from a no-op to:
-- Remove the sandbox dir.
Again, because the dependency order set in bsd.test.mk is
beforecheck -> check -> aftercheck, "make check" will not be run unless
"beforecheck" completes successfully, and "aftercheck" will not be run unless
"beforecheck" and "check" complete successfully.
== Caveats ==
- This target must either be run with MK_INSTALL_AS_USER or as root. Otherwise
it will fail when running "make install" as the default user/group for many
makefiles when calling INSTALL is root/wheel.
- This target must be run from a suitable top-level directory. For example,
running tests from `tests/sys/fs/tmpfs` won't work, but `tests/sys/fs` will,
because `tests/sys/fs/tmpfs` relies on files installed by `tests/sys/fs`.
- Running MK_INSTALL_AS_USER may introduce determinism issues. However, using
it could identify deficiences in tests in terms of needing to be run as
root, which are not properly articulated in the test requirements.
- The doesn't negate the need for running "make installworld" and
"make checkworld", etc. Again, this just is intended to simplify the
dev->test->commit workflow.
== Cleanup done ==
- CHECKDIR is removed; one can use "MK_MAKE_CHECK_USE_SANDBOX=no" to enable
"legacy" (r295380) behavior.
MFC after: 2 months
Relnotes: yes (CHECKDIR removed; "make check" behavior changed)
Requested by: jhb
Reviewed by: arch (silence), testing (silence)
Differential Revision: D11905
(to match official RISC-V target for GCC 7.1).
This is only a minimal config required to build c start up (csu).
This fixes build after r322429 ("Make _TO_CPUARCH macro for
ARCH to CPUARCH conversions")
Reported by: lwhsu
Sponsored by: DARPA, AFRL
It is quite useful when double fault is not caused by a stack overflow.
Tested by: pho (as part of the larger patch)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Do this even for non-transparent mode VF. Better safe than sorry.
MFC after: 3 days
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D11981
- Update hn(4)'s stats properly for non-transparent mode VF.
- Allow BPF tapping to hn(4) for non-transparent mode VF.
- Don't setup mbuf hash, if 'options RSS' is set.
In Azure, when VF is activated, TCP SYN and SYN|ACK go through hn(4)
while the rest of segments and ACKs belonging to the same TCP 4-tuple
go through the VF. So don't setup mbuf hash, if a VF is activated
and 'options RSS' is not enabled. hn(4) and the VF may use neither
the same RSS hash key nor the same RSS hash function, so the hash
value for packets belonging to the same flow could be different!
- Disable LRO.
hn(4) will only receive broadcast packets, multicast packets, TCP
SYN and SYN|ACK (in Azure), LRO is useless for these packet types.
For non-transparent, we definitely _cannot_ enable LRO at all, since
the LRO flush will use hn(4) as the receiving interface; i.e.
hn_ifp->if_input(hn_ifp, m).
While I'm here, remove unapplied comment and minor style change.
MFC after: 3 days
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D11978
While, I'm here add comment about why updating VF's imcast stat is
not necessary.
MFC after: 3 days
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D11948
setting up the timer fails, because on some types of chips that's the
first attempt to access the device. If the chip is missing/non-responsive
then you'd get a driver that attached and didn't register the rtc, with
no clue about why. On other chip types there are inits that come before
timer setup, and they already print messages about errors.
- Add FDT probe code.
- Do i2c transfers with exclusive bus ownership.
- Use config_intrhook_oneshot() to defer chip setup because some i2c
busses can't do transfers without interrupts.
- Add a detach() routine.
- Add to module build.
This driver supports only basic timekeeping functionality. It completely
replaces the ds133x driver. It can also replace the ds1374 driver, but that
will take a few other changes in MIPS code and config, and will be committed
separately. It does NOT replace the existing ds1307 driver, which provides
access to some of the extended features on the 1307 chip, such as controlling
the square wave output signal. If both ds1307 and ds13rtc drivers are
present, the ds1307 driver will outbid and win control of the device.
This driver can be configured with FDT data, or by using hints on non-FDT
systems. In addition to the standard hints for i2c devices, it requires
a "chiptype" string of the form "dallas,ds13xx" where 'xx' is the chip id
(i.e., the same format as FDT compat strings).
and sc_irq_length to the softc to handle the base number of IRQs available,
make gicv3_get_nirqs return the number of available interrupt IDs, and
limit which CPUs we send interrupts to based on the numa domain.
The last point is only strictly needed on a dual socket ThunderX where we
are unable to send MSI/MSI-X interrupts between sockets.
Sponsored by: DARPA, AFRL
it automatically after it runs.
The config_intrhook mechanism allows a driver to stall the boot process
until device(s) required for booting are available, by not allowing system
inits to proceed until all intrhook functions have been unregistered.
Virtually all existing code simply unregisters from within the hook function
when it gets called.
This new function makes that common usage more convenient. Instead of
allocating and filling in a struct, passing it to a function that might (in
theory) fail, and checking the return code, now a driver can simply call
this cannot-fail routine, passing just the intrhook function and its arg.
Differential Revision: https://reviews.freebsd.org/D11963
the g_journal level needs to check whether it is holding a newer
copy of the block than that which exists on the disk. If so, it
needs to return its copy. If not, it should pass the request down
to the disk to fulfill. It currently considers six queues:
0) delayed queue,
1) unsent (current queue),
2) in-flight to the journal (flush queue),
3) active journal (active queue),
4) inactive journal (inactive queue), and
5) inflight to the disk (copy queue).
Checking on two of these queues is unnecessary:
0) The delayed requests should not be used for reads because they
have not yet been entered into the journal, so their value should
reflect the disk contents, not the future contents that are not
yet committed.
2) Because all the bio's in the flush queue are also found on the
active queue, there is no need to inspect the flush queue for
reads since they will be found when searching the active queue.
Submitted by: Dr. Andreas Longwitz <longwitz@incore.de>
Discussed with: kib
MFC after: 1 week
another parameter that identifies a starting point in the memory address
block. Radix is a power of two, blk is a multiple of radix, and the
starting point is in the range [blk, blk+radix), so that blk can always be
computed from the other two. This change drops the blk parameter from the
meta functions and computes it instead. (On amd64, for example, this
change reduces subr_blist.o's text size by 7%.)
It also makes the radix parameters unsigned to address concerns that the
calculation of '-radix' might overflow without the -fwrapv option. (See
https://reviews.freebsd.org/D11819.)
Submitted by: Doug Moore <dougm@rice.edu>
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D11964
On i386 with CPUID but without SSE2, set lfence_works to LMB_NONE
instead of looping.
Reported and tested by: Andre Albsmeier <andre@fbsd.e4m.org>
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
time. Remove it from here. As far as I could tell, nothing in ports
use it (either __ARM_ARCH or __ARM_ARCH_6__ is used in all the
apatches). We do have a define for _ARM_ARCH_6, but it's mostly unused
(and will remain, since it isn't in this file).
The reachover Kyuafiles were never added, and thus the tests were installed
as standalone tests, and not integrated into the full suite.
MFC after: 1 week
MFC with: r305626, 305629, r307863, r322447, r322448, r322449
of freefall.freebsd.org to unbreak the DNS tests
The address allocations for freefall.freebsd.org have changed in the past 4 years.
Use a more stable set of hardcoded addresses for now to make the tests succeed
reliably.
The hostname should be resolved dynamically instead of hardcoding the addresses in
the future. This is just a bandaid.
MFC after: 1 week
Some of the testcases try to manipulate sysctls that require root privileges,
e.g., "kern.sync_on_panic". Make root-privileges a hard requirement so the
tests don't raise false positives due to privilege issues when calling
sysctlbyname(3) on writable sysctls.
MFC after: 1 week
- Flushing stdout prevents the buffer from being printed twice, fixing
issues with stdout printing out the testplan, etc, twice.
- Don't print out raw source/line numbers; hide them behind comments.
MFC after: 1 week
to being called through the newbus DEVICE_SHUTDOWN() path. This ensures that
the NVME controller gets shut down before the device and bus disappear
and prevents data corruption on shutdown on at least Samsung EVO 960 SSDs.
PR: kern/211852
Reviewed by: imp
MFC after: 2 weeks
Note: Mouse's bthidd.conf record should contain vendor and device IDs
to make proper device detection. If it does not contain IDs,
regenerate record with "Query" command of recent bthidcontrol(8).
Submitted by: Dirk Engling <erdgeist@erdgeist.org>
Reviewed by: emax
Approved by: bapt (mentor), gonzo (mentor)
Differential Revision: https://reviews.freebsd.org/D3702
Extend bthidd.conf format to store vendor and product IDs of remote
Bluetooth HID devices to make possible implementation of device
specific quirks inside bthidd(8).
Add support for querying of this information from device's SDP records
with bthidcontrol(8) "Query" command.
Submitted by: Dirk Engling <erdgeist@erdgeist.org>
Reviewed by: emax
Approved by: bapt (mentor), gonzo (mentor)
Differential Revision: https://reviews.freebsd.org/D3702
Previously, debug exceptions were only enabled on the boot CPU if
DDB was enabled in the dbg_monitor_init() function. APs also called
this function, but since mp_machdep.c doesn't include opt_ddb.h, the
APs ended up calling an empty stub defined in <machine/debug_monitor.h>
instead of the real function. Also, if DDB was not enabled in the kernel,
the boot CPU would not enable debug exceptions.
Fix this by adding a new dbg_init() function that always clears the OS
lock to enable debug exceptions which the boot CPU and the APs call.
This function also calls dbg_monitor_init() to enable hardware breakpoints
from DDB on all CPUs if DDB is enabled. Eventually base support for
hardware breakpoints/watchpoints will need to move out of the DDB-only
debug_monitor.c for use by userland debuggers.
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D12001
Only fetch the VFP state from the CPU if the thread whose registers are
being requested is the current thread. If a stopped thread's registers
are being fetched by a debugger, the saved state in the PCB is already
valid.
Reviewed by: andrew
MFC after: 1 week