a return instruction. (The latter is discouraged by the Opteron
optimization manual because it disables branch prediction for the return
instruction.)
Reviewed by: bde
* Handles entries with compressed size >2GB (signed/unsigned cleanup)
* Handles entries with compressed size >4GB ("ZIP64" extension)
* Handles Unix extensions (ctime, atime, mtime, mode, uid, etc)
* Format-specific "skip data" override allows ZIP reader to skip
entries without decompressing them, which makes "tar -t"
a lot faster.
* Handles "length-at-end" entries generated by, e.g., "zip -r - foo"
Many thanks to: Dan Nelson, who contributed the code and test files for
the first three items above and suggested the fourth.
libalias.
In /usr/src/lib/libalias/alias.c, the functions LibAliasIn and
LibAliasOutTry call the legacy PacketAliasIn/PacketAliasOut instead
of LibAliasIn/LibAliasOut when the PKT_ALIAS_REVERSE option is set.
In this case, the context variable "la" gets lost because the legacy
compatibility routines expect "la" to be global. This was obviously
an oversight when rewriting the PacketAlias* functions to the
LibAlias* functions.
The fix (as shown in the patch below) is to remove the legacy
subroutine calls and replace with the new ones using the "la" struct
as the first arg.
Submitted by: Gil Kloepfer <fgil@kloepfer.org>
Confirmed by: <nicolai@catpipe.net>
PR: 76839
MFC after: 3 days
implementations inspired by the ones in DragonFly. Unlike the
DragonFly versions, these have a small data cache footprint, and my
tests show that they're never slower than the old code except when the
charset or the span is 0 or 1 characters. This implementation is
generally faster than DragonFly until either the charset or the span
gets in the ballpark of 32 to 64 characters.
these at the moment, but applications that test for them will now
have a better chance of compiling.
I have intentionally omitted errnos that are only good for STREAMS,
since apps that use STREAMS won't compile anyway. The exception is
EPROTO, which was apparently intended for STREAMS, but worth having
anyway because Linux (mis)uses it for other things.
1. fast simple type mutex.
2. __thread tls works.
3. asynchronous cancellation works ( using signal ).
4. thread synchronization is fully based on umtx, mainly, condition
variable and other synchronization objects were rewritten by using
umtx directly. those objects can be shared between processes via
shared memory, it has to change ABI which does not happen yet.
5. default stack size is increased to 1M on 32 bits platform, 2M for
64 bits platform.
As the result, some mysql super-smack benchmarks show performance is
improved massivly.
Okayed by: jeff, mtm, rwatson, scottl
floating-point arithmetic on i386. Now I'm going to make excuses
for why this code is kinda scary:
- To avoid breaking the ABI with 5.3-RELEASE, we can't change
sizeof(fenv_t). I stuck the saved mxcsr in some discontiguous
reserved bits in the existing structure.
- Attempting to access the mxcsr on older processors results
in an illegal instruction exception, so support for SSE must
be detected at runtime. (The extra baggage is optimized away
if either the application or libm is compiled with -msse{,2}.)
I didn't run tests to ensure that this doesn't SIGILL on older 486's
lacking the cpuid instruction or on other processors lacking SSE.
Results from running the fenv regression test on these processors
would be appreciated. (You'll need to compile the test with
-DNO_STRICT_DFL_ENV.) If you have an 80386, or if your processor
supports SSE but the kernel didn't enable it, then you're probably out
of luck.
Also, I un-inlined some of the functions that grew larger as a result
of this change, moving them from fenv.h to fenv.c.
fedisableexcept(), and fegetexcept(). These two sets of routines
provide the same functionality. I implemented the former as an
undocumented internal interface to make the regression test easier to
write. However, fe(enable|disable|get)except() is already part of
glibc, and I would like to avoid gratuitous differences. The only
major flaw in the glibc API is that there's no good way to report
errors on processors that don't support all the unmasked exceptions.
to mistakes from day 1, it has always had semantics inconsistent with
SVR4 and its successors. In particular, given argument M:
- On Solaris and FreeBSD/{alpha,sparc64}, it clobbers the old flags
and *sets* the new flag word to M. (NetBSD, too?)
- On FreeBSD/{amd64,i386}, it *clears* the flags that are specified in M
and leaves the remaining flags unchanged (modulo a small bug on amd64.)
- On FreeBSD/ia64, it is not implemented.
There is no way to fix fpsetsticky() to DTRT for both old FreeBSD apps
and apps ported from other operating systems, so the best approach
seems to be to kill the function and fix any apps that break. I
couldn't find any ports that use it, and any such ports would already
be broken on FreeBSD/ia64 and Linux anyway.
By the way, the routine has always been undocumented in FreeBSD,
except for an MLINK to a manpage that doesn't describe it. This
manpage has stated since 5.3-RELEASE that the functions it describes
are deprecated, so that must mean that functions that it is *supposed*
to describe but doesn't are even *more* deprecated. ;-)
Note that fpresetsticky() has been retained on FreeBSD/i386. As far
as I can tell, no other operating systems or ports of FreeBSD
implement it, so there's nothing for it to be inconsistent with.
PR: 75862
Suggested by: bde
particularly good reason to do this, except that __strong_reference
does type checking, whereas __weak_reference does not.
On Alpha, the compiler won't accept a 'long double' parameter in
place of a 'double' parameter even thought the two types are
identical.
an invalid exception and return an NaN.
- If a long double has 113 bits of precision, implement fma in terms
of simple long double arithmetic instead of complicated double arithmetic.
- If a long double is the same as a double, alias fma as fmal.
identical to scalbnf, which is now aliased as ldexpf. Note that the
old implementations made the mistake of setting errno and were the
only libm routines to do so.
- Add nexttoward{,f,l} and nextafterl. On all platforms,
nexttowardl is an alias for nextafterl.
- Add fmal.
- Add man pages for new routines: fmal, nextafterl,
nexttoward{,f,l}, scalb{,l}nl.
Note that on platforms where long double is the same as double, we
generally just alias the double versions of the routines, since doing
so avoids extra work on the source code level and redundant code in
the binary. In particular:
ldbl53 ldbl64/113
fmal s_fma.c s_fmal.c
ldexpl s_scalbn.c s_scalbnl.c
nextafterl s_nextafter.c s_nextafterl.c
nexttoward s_nextafter.c s_nexttoward.c
nexttowardf s_nexttowardf.c s_nexttowardf.c
nexttowardl s_nextafter.c s_nextafterl.c
scalbnl s_scalbn.c s_scalbnl.c
sparc64's 128-bit long doubles.
- Define FP_FAST_FMAL for ia64.
- Prototypes for fmal, frexpl, ldexpl, nextafterl, nexttoward{,f,l},
scalblnl, and scalbnl.
- In scalbln and scalblnf, check the bounds of the second argument.
This is probably unnecessary, but strictly speaking, we should
report an error if someone tries to compute scalbln(x, INT_MAX + 1ll).
nexttowardl. These are not needed on machines where long doubles
look like IEEE-754 doubles, so the implementation only supports
the usual long double formats with 15-bit exponents.
Anything bizarre, such as machines where floating-point and integer
data have different endianness, will cause problems. This is the case
with big endian ia64 according to libc/ia64/_fpmath.h. Please contact
me if you managed to get a machine running this way.
that are intended to raise underflow and inexact exceptions.
- On systems where long double is the same as double, nextafter
should be aliased as nexttoward, nexttowardl, and nextafterl.
bit in a long double. For architectures that don't have such a bit,
LDBL_NBIT is 0. This makes it possible to say `mantissa & ~LDBL_NBIT'
in places that previously used an #ifdef to select the right expression.
The optimizer should dispense with the extra arithmetic when LDBL_NBIT
is 0 anyway.
- Add an XXX comment for the big endian case.
bit in a long double. For architectures that don't have such a bit,
LDBL_NBIT is 0. This makes it possible to say `mantissa & ~LDBL_NBIT'
in places that previously used an #ifdef to select the right expression.
The optimizer should dispense with the extra arithmetic when LDBL_NBIT
is 0.
Symptoms of the problem included assembler warnings and
nondeterministic runtime behavior when a fe*() call that affects the
fpsr is closely followed by a float point op.
The bug (at least, I think it's a bug) is that gcc does not insert a
break between a volatile asm and a dependent instruction if the
volatile asm came from an inlined function. Volatile asms seem to be
fine in other circumstances, even without -mvolatile-asm-stop, so
perhaps the compiler adds the stop bits before inlining takes place.
The problem does not occur at -O0 because inlining is disabled, and it
doesn't happen at -O2 because -fschedule-insns2 knows better.
a libalias application (e.g. natd, ppp, etc.) to crash. Note: Skinny support
is not enabled in natd or ppp by default.
Approved by: secteam (nectar)
MFC after: 1 day
Secuiryt: This fixes a remote DoS exploit
any pending HTTP request rather than calling shutdown(2) with SHUT_WR.
This makes libfetch (and thus fetch(1)) work again with Squid proxies
configured to not allow half-closed connections.
Reported by: Pawel Worach (pawel.worach AT telia DOT com)
the lock is held by other thread, but not when nobody owns it. According
to deischen@, this part of code will never be hit in our threads
library, since it does not use locks without wait/wakeup functions.
Spotted by: mingyanguo via ChinaUnix.net forum
Reviewed by: deischen
surrounding the undef'ing it. It does not seem necessary to
undef some symbol that is not exist, and gcc does not complain
about whether a symbol is exist before #undef'ing it out.
Spotted by: mingyanguo via ChinaUnix.net forum
Reviewed by: phk
it type and endian clean and removing of stdio dependency from NLS
functions (catalog files now are processed via mmap())
Also following changes were done (against NetBSD version):
. If mmap() failed, set errno to EINVAL and do not try to munmap() file
Obtained from: NetBSD
. Replace inclusion of sys/param.h to sys/cdefs.h and sys/types.h where
appropriate.
. move _*_init() prototypes to mblocal.h, and remove these prototypes
from .c files
. use _none_init() in __setrunelocale() instead of duplicating code
. move __mb* variables from table.c to none.c allowing us to not to
export _none_*() externs, and appropriately remove them from mblocal.h
Ok'ed by: tjr
introducing the disk formats for _RuneLocale and friends.
The disk formats do not have (useless) pointers and have 32-bit
quantities instead of rune_t and long. (htonl(3) only works
with 32-bit quantities, so there's no loss).
Bootstrap mklocale(1) when necessary. (Bootstrapping from 4.x
would be trivial (verified), but we no longer provide pre-5.3
source upgrades and this is the first commit to actually break
it.)
inputs. The trouble with replacing two floats with a double is that
the latter has 6 extra bits of precision, which actually hurts
accuracy in many cases. All of the constants are optimal when float
arithmetic is used, and would need to be recomputed to do this right.
Noticed by: bde (ucbtest)
return a generic text message instead.
(Someday, I'll track down all the places that
are generating errors but not recording messages. ;-/
Thanks to: Jaakko Heinonen
results in a performance gain on the order of 10% for amd64 (sledge),
ia64 (pluto1), i386+SSE (Pentium 4), and sparc64 (panther), and a
negligible improvement for i386 without SSE. (The i386 port still
uses the hardware instruction, though.)
changed to use the statclock. Make sure we calculate the value
of a tick correctly in userland.
Noticed by: Kazuaki Oda <kaakun at highway dot ne dot jp>
occurred with large read-ahead requests. This only affected
formats that incorrectly make large requests (ZIP did this until
recently) or with block sizes over 32k.
When reading the bodies of Zip archive entries, request a minimum of 1
byte, rather than a minimum of the full entry size. This is faster
(since it does not force the decompression layer to combine reads) and
works around a bug in the "none" decompression handler (which I'm
testing a separate fix for now). I've also renamed "bytes_read" to
"bytes_avail" in several places to more accurately reflect that the
value returned from (a->compression_read_ahead) is the number of bytes
available, not necessarily the number of bytes requested.
(padding) entries, extract inode value from PX entry, recognize SP and
ST (start/end of SUSP extensions).
I don't enforce SP yet, as I've seen CDROMs which use Rockridge
extensions but don't have the SP record (which is officially
required).
The ISO9660 support is now mature enough to extract FreeBSD
distribution CDROMs created with mkisofs.
- Remove all:. It's redundant, and ${LIB} in it is just a bug.
- Remove .ORDER:. *.mgc files can safely be built in parallel.
- Remove PITA. The mkmagic tool is smart to put the binary file
into the current directory (${.OBJDIR}) even if the source file
lives somewhere else, which is just what we need.
manpages. They are not very related, so separating them makes it
easier to add meaningful cross-references and extend some of the
descriptions.
- Move the part of math(3) that discusses IEEE 754 to the ieee(3)
manpage.
Only supports "deflate" and "none" compression for now.
Also, add a few clarifications to the archive_read.3 manpage as
requested by William Dean DeVries.
copy the acquired TGT from the in-memory cache to the on-disk cache
at login. This was documented but un-implemented behavior.
MFC after: 1 week
PR: bin/64464
Reported and tested by: Eric van Gyzen <vangyzen at stat dot duke dot edu>
FreeBSD currently implements the most up to date IPv6 APIs for
option and route header parsing. This checkin marks the older APIs
as deprecated and points the reader to the newer pages.
Reviewed by: Jun-ichiro Itojun
Approved by: rwatson (mentor)
- Rearrange the list of functions into categories.
- Remove the ulps column. It was appropriate for only some
of the functions in the list, and correct for even fewer
of them.
- Add some new paragraphs, and remove some old ones about
NaNs that may do more harm than good.
- Document precisions other than double-precision.
- Although ldexp() is in libc for backwards compatibility, ldexpf() is
in its proper place in libm. Document both as being in libm.
- The ldexp() and ldexpf() functions conform to C99.
- Neither frexp() nor frexpf() set errno.
- Although frexp() is in libc for backwards compatibility, frexpf() is
in its proper place in libm. Document both as being in libm.
- The frexp() and frexpf() functions conform to C99.
Reviewed by: Kame Project (including Itojun-san, Jinmei-san and Suzuki-san)
Approved by: Robert Watson (robert at freebsd dot org)
Obtained from: Kame Project and OpenBSD
Replace manual pages that may have violated the IETF's Copyright.
All come from the Kame tree.
Several were from OpenBSD except for ip6.4, and the inet6* pages which were
rewritten by me.
All of the text is new and drawn from reading the code and
documentation.
Approved by: Robert Watson (robert at freebsd dot org)
Remove files in preparation for replacement with totally new versions
of the manual pages.
Update the Makefile to handle the new file to be added.
scalbn() implementation from libm. (The two functions are defined to
be identical, but ldexp() lives in libc for backwards compatibility.)
The old ldexp() implementation...
- was more complicated than this one
- set errno instead of raising FP exceptions
- got some corner cases wrong
(e.g. ldexp(1.0, 2000) in round-to-zero mode)
The new implementation lives in libc/gen instead of
libc/$MACHINE_ARCH/gen, since we don't need N copies of a
machine-independent file. The amd64 and i386 platforms
retain their fast and correct MD implementations and
override this one.
really so.
"If the value of base is 16, the characters 0x or 0X may optionally
precede the sequence of letters and digits, following the sign if
present."
Found by: joerg
