Summary:
In preparation of making if_t completely opaque outside of the netstack,
explicitly include the header. <net/if_var.h> will stop including the
header in the future.
Sponsored by: Juniper Networks, Inc.
Reviewed by: glebius, melifaro
Differential Revision: https://reviews.freebsd.org/D38200
In the original design of the network stack from the protocol control
input method pr_ctlinput was used notify the protocols about two very
different kinds of events: internal system events and receival of an
ICMP messages from outside. These events were coded with PRC_ codes.
Today these methods are removed from the protosw(9) and are isolated
to IPv4 and IPv6 stacks and are called only from icmp*_input(). The
PRC_ codes now just create a shim layer between ICMP codes and errors
or actions taken by protocols.
- Change ipproto_ctlinput_t to pass just pointer to ICMP header. This
allows protocols to not deduct it from the internal IP header.
- Change ip6proto_ctlinput_t to pass just struct ip6ctlparam pointer.
It has all the information needed to the protocols. In the structure,
change ip6c_finaldst fields to sockaddr_in6. The reason is that
icmp6_input() already has this address wrapped in sockaddr, and the
protocols want this address as sockaddr.
- For UDP tunneling control input, as well as for IPSEC control input,
change the prototypes to accept a transparent union of either ICMP
header pointer or struct ip6ctlparam pointer.
- In icmp_input() and icmp6_input() do only validation of ICMP header and
count bad packets. The translation of ICMP codes to errors/actions is
done by protocols.
- Provide icmp_errmap() and icmp6_errmap() as substitute to inetctlerrmap,
inet6ctlerrmap arrays.
- In protocol ctlinput methods either trust what icmp_errmap() recommend,
or do our own logic based on the ICMP header.
Differential revision: https://reviews.freebsd.org/D36731
After decoupling of protosw(9) and IP wire protocols in 78b1fc05b2 for
IPv4 we got vector ip_ctlprotox[] that is executed only and only from
icmp_input() and respectively for IPv6 we got ip6_ctlprotox[] executed
only and only from icmp6_input(). This allows to use protocol specific
argument types in these methods instead of struct sockaddr and void.
Reviewed by: melifaro
Differential revision: https://reviews.freebsd.org/D36727
The protosw KPI historically has implemented two quite orthogonal
things: protocols that implement a certain kind of socket, and
protocols that are IPv4/IPv6 protocol. These two things do not
make one-to-one correspondence. The pr_input and pr_ctlinput methods
were utilized only in IP protocols. This strange duality required
IP protocols that doesn't have a socket to declare protosw, e.g.
carp(4). On the other hand developers of socket protocols thought
that they need to define pr_input/pr_ctlinput always, which lead to
strange dead code, e.g. div_input() or sdp_ctlinput().
With this change pr_input and pr_ctlinput as part of protosw disappear
and IPv4/IPv6 get their private single level protocol switch table
ip_protox[] and ip6_protox[] respectively, pointing at array of
ipproto_input_t functions. The pr_ctlinput that was used for
control input coming from the network (ICMP, ICMPv6) is now represented
by ip_ctlprotox[] and ip6_ctlprotox[].
ipproto_register() becomes the only official way to register in the
table. Those protocols that were always static and unlikely anybody
is interested in making them loadable, are now registered by ip_init(),
ip6_init(). An IP protocol that considers itself unloadable shall
register itself within its own private SYSINIT().
Reviewed by: tuexen, melifaro
Differential revision: https://reviews.freebsd.org/D36157
This is expensive and useless call. It has been useless since Alexander
melifaro@ moved the forwarding table to nexthops with passive invalidation.
What happens now is that cached route in a inpcb would get invalidated
on next ip_output().
These were the last users of pfctlinput(), so garbage collect it.
Reviewed by: melifaro
Differential revision: https://reviews.freebsd.org/D36156
Combined changes to allow experimentation with net 0/8 (network 0),
240/4 (Experimental/"Class E"), and part of the loopback net 127/8
(all but 127.0/16). All changes are disabled by default, and can be
enabled by the following sysctls:
net.inet.ip.allow_net0=1
net.inet.ip.allow_net240=1
net.inet.ip.loopback_prefixlen=16
When enabled, the corresponding addresses can be used as normal
unicast IP addresses, both as endpoints and when forwarding.
Add descriptions of the new sysctls to inet.4.
Add <machine/param.h> to vnet.h, as CACHE_LINE_SIZE is undefined in
various C files when in.h includes vnet.h.
The proposals motivating this experimentation can be found in
https://datatracker.ietf.org/doc/draft-schoen-intarea-unicast-0https://datatracker.ietf.org/doc/draft-schoen-intarea-unicast-240https://datatracker.ietf.org/doc/draft-schoen-intarea-unicast-127
Reviewed by: rgrimes, pauamma_gundo.com; previous versions melifaro, glebius
Differential Revision: https://reviews.freebsd.org/D35741
The modification to the hash are already naturally locked by
in_control_sx. Convert the hash lists to CK lists. Remove the
in_ifaddr_rmlock. Assert the network epoch where necessary.
Most cases when the hash lookup is done the epoch is already entered.
Cover a few cases, that need entering the epoch, which mostly is
initial configuration of tunnel interfaces and multicast addresses.
Reviewed by: melifaro
Differential revision: https://reviews.freebsd.org/D32584
The main driver for the change is the need to improve notification mechanism.
Currently callers guess the operation data based on the rtentry structure
returned in case of successful operation result. There are two problems with
this appoach. First is that it doesn't provide enough information for the
upcoming multipath changes, where rtentry refers to a new nexthop group,
and there is no way of guessing which paths were added during the change.
Second is that some rtentry fields can change during notification and
protecting from it by requiring customers to unlock rtentry is not desired.
Additionally, as the consumers such as rtsock do know which operation they
request in advance, making explicit add/change/del versions of the functions
makes sense, especially given the functions don't share a lot of code.
With that in mind, introduce rib_cmd_info notification structure and
rib_<add|del|change>_route() functions, with mandatory rib_cmd_info pointer.
It will be used in upcoming generalized notifications.
* Move definitions of the new functions and some other functions/structures
used for the routing table manipulation to a separate header file,
net/route/route_ctl.h. net/route.h is a frequently used file included in
~140 places in kernel, and 90% of the users don't need these definitions.
Reviewed by: ae
Differential Revision: https://reviews.freebsd.org/D25067
The main driver for the change is the need to improve notification mechanism.
Currently callers guess the operation data based on the rtentry structure
returned in case of successful operation result. There are two problems with
this appoach. First is that it doesn't provide enough information for the
upcoming multipath changes, where rtentry refers to a new nexthop group,
and there is no way of guessing which paths were added during the change.
Second is that some rtentry fields can change during notification and
protecting from it by requiring customers to unlock rtentry is not desired.
Additionally, as the consumers such as rtsock do know which operation they
request in advance, making explicit add/change/del versions of the functions
makes sense, especially given the functions don't share a lot of code.
With that in mind, introduce rib_cmd_info notification structure and
rib_<add|del|change>_route() functions, with mandatory rib_cmd_info pointer.
It will be used in upcoming generalized notifications.
* Move definitions of the new functions and some other functions/structures
used for the routing table manipulation to a separate header file,
net/route/route_ctl.h. net/route.h is a frequently used file included in
~140 places in kernel, and 90% of the users don't need these definitions.
Reviewed by: ae
Differential Revision: https://reviews.freebsd.org/D25067
fib4_lookup_nh_ represents pre-epoch generation of fib api,
providing less guarantees over pointer validness and requiring
on-stack data copying.
Conversion is straight-forwarded, as the only 2 differences are
requirement of running in network epoch and the need to handle
RTF_GATEWAY case in the caller code.
Reviewed by: ae
Differential Revision: https://reviews.freebsd.org/D24976
Redirect (and temporal) route expiration was broken a while ago.
This change brings route expiration back, with unified IPv4/IPv6 handling code.
It introduces net.inet.icmp.redirtimeout sysctl, allowing to set
an expiration time for redirected routes. It defaults to 10 minutes,
analogues with net.inet6.icmp6.redirtimeout.
Implementation uses separate file, route_temporal.c, as route.c is already
bloated with tons of different functions.
Internally, expiration is implemented as an per-rnh callout scheduled when
route with non-zero rt_expire time is added or rt_expire is changed.
It does not add any overhead when no temporal routes are present.
Callout traverses entire routing tree under wlock, scheduling expired routes
for deletion and calculating the next time it needs to be run. The rationale
for such implemention is the following: typically workloads requiring large
amount of routes have redirects turned off already, while the systems with
small amount of routes will not inhibit large overhead during tree traversal.
This changes also fixes netstat -rn display of route expiration time, which
has been broken since the conversion from kread() to sysctl.
Reviewed by: bz
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D23075
When epoch(9) was introduced to network stack, it was basically
dropped in place of existing locking, which was mutexes and
rwlocks. For the sake of performance mutex covered areas were
as small as possible, so became epoch covered areas.
However, epoch doesn't introduce any contention, it just delays
memory reclaim. So, there is no point to minimise epoch covered
areas in sense of performance. Meanwhile entering/exiting epoch
also has non-zero CPU usage, so doing this less often is a win.
Not the least is also code maintainability. In the new paradigm
we can assume that at any stage of processing a packet, we are
inside network epoch. This makes coding both input and output
path way easier.
On output path we already enter epoch quite early - in the
ip_output(), in the ip6_output().
This patch does the same for the input path. All ISR processing,
network related callouts, other ways of packet injection to the
network stack shall be performed in net_epoch. Any leaf function
that walks network configuration now asserts epoch.
Tricky part is configuration code paths - ioctls, sysctls. They
also call into leaf functions, so some need to be changed.
This patch would introduce more epoch recursions (see EPOCH_TRACE)
than we had before. They will be cleaned up separately, as several
of them aren't trivial. Note, that unlike a lock recursion the
epoch recursion is safe and just wastes a bit of resources.
Reviewed by: gallatin, hselasky, cy, adrian, kristof
Differential Revision: https://reviews.freebsd.org/D19111
- Remove macros that covertly create epoch_tracker on thread stack. Such
macros a quite unsafe, e.g. will produce a buggy code if same macro is
used in embedded scopes. Explicitly declare epoch_tracker always.
- Unmask interface list IFNET_RLOCK_NOSLEEP(), interface address list
IF_ADDR_RLOCK() and interface AF specific data IF_AFDATA_RLOCK() read
locking macros to what they actually are - the net_epoch.
Keeping them as is is very misleading. They all are named FOO_RLOCK(),
while they no longer have lock semantics. Now they allow recursion and
what's more important they now no longer guarantee protection against
their companion WLOCK macros.
Note: INP_HASH_RLOCK() has same problems, but not touched by this commit.
This is non functional mechanical change. The only functionally changed
functions are ni6_addrs() and ni6_store_addrs(), where we no longer enter
epoch recursively.
Discussed with: jtl, gallatin
icmp_error allocates either an mbuf (with pkthdr) or a cluster depending
on the size of data to be quoted in the ICMP reply, but the calculation
failed to account for the additional padding that m_align may apply.
Include the ip header in the size passed to m_align. On 64-bit archs
this will have the net effect of moving everything 4 bytes later in the
mbuf or cluster. This will result in slightly pessimal alignment for
the ICMP data copy.
Also add an assertion that we do not move m_data before the beginning of
the mbuf or cluster.
Reported by: A reddit user
Reviewed by: bz, jtl
MFC after: 3 days
Security: CVE-2018-17156
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D17909
Currently, icmp_error() function copies FIB number from original packet
into generated ICMP response but not mbuf_tags(9) chain.
This prevents us from easily matching ICMP responses corresponding
to tagged original packets by means of packet filter such as ipfw(8).
For example, ICMP "time-exceeded in-transit" packets usually generated
in response to traceroute probes lose tags attached to original packets.
This change adds new sysctl net.inet.icmp.error_keeptags
that defaults to 0 to avoid extra overhead when this feature not needed.
Set net.inet.icmp.error_keeptags=1 to make icmp_error() copy mbuf_tags
from original packet to generated ICMP response.
PR: 215874
MFC after: 1 month
Mainly focus on files that use BSD 3-Clause license.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
* check mbuf length before doing mtod() and accessing to IP header;
* update oip pointer and all depending pointers after m_pullup();
* remove extra checks and extra parentheses, wrap long lines;
PR: 222670
Reported by: Prabhakar Lakhera
MFC after: 1 week
response.
Delete an unneeded rate limit for UDP under IPv6. Because ICMP6
messages have their own rate limit, it is unnecessary to apply a
second rate limit to UDP messages.
Reviewed by: glebius
MFC after: 2 weeks
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D10387
A long long time ago the register keyword told the compiler to store
the corresponding variable in a CPU register, but it is not relevant
for any compiler used in the FreeBSD world today.
ANSIfy related prototypes while here.
Reviewed by: cem, jhb
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D10193
Renumber cluase 4 to 3, per what everybody else did when BSD granted
them permission to remove clause 3. My insistance on keeping the same
numbering for legal reasons is too pedantic, so give up on that point.
Submitted by: Jan Schaumann <jschauma@stevens.edu>
Pull Request: https://github.com/freebsd/freebsd/pull/96
inet_ntoa() cannot be used safely in a multithreaded environment
because it uses a static local buffer. Instead, use inet_ntoa_r()
with a buffer on the caller's stack.
Suggested by: glebius, emaste
Reviewed by: gnn
MFC after: 2 weeks
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D9625
handling. Ensure that:
* Protocol unreachable errors are handled by indicating ECONNREFUSED
to the TCP user for both IPv4 and IPv6. These were ignored for IPv6.
* Communication prohibited errors are handled by indicating ECONNREFUSED
to the TCP user for both IPv4 and IPv6. These were ignored for IPv6.
* Hop Limited exceeded errors are handled by indicating EHOSTUNREACH
to the TCP user for both IPv4 and IPv6.
For IPv6 the TCP connected was dropped but errno wasn't set.
Reviewed by: gallatin, rrs
MFC after: 1 month
Sponsored by: Netflix
Differential Revision: 7904
* include the SCTP common header, if possible
* include the first 8 bytes of the INIT chunk, if possible
This provides the necesary information for the receiver of the ICMP
packet to process it.
MFC after: 1 week
the outer IP header, the ICMP header, the inner IP header and the
first n bytes are stored in contgous memory. The ctlinput functions
currently rely on this for n = 8. This fixes a bug in case the inner IP
header had options.
While there, remove the options from the outer header and provide a
way to increase n to allow improved ICMP handling for SCTP. This will
be added in another commit.
MFC after: 1 week
ip_dooptions(), icmp6_redirect_input(), in6_lltable_rtcheck(),
in6p_lookup_mcast_ifp() and in6_selecthlim() use new routing api.
Eliminate now-unused ip_rtaddr().
Fix lookup key fib6_lookup_nh_basic() which was lost diring merge.
Make fib6_lookup_nh_basic() and fib6_lookup_nh_extended() always
return IPv6 destination address with embedded scope. Currently
rw_gateway has it scope embedded, do the same for non-gatewayed
destinations.
Sponsored by: Yandex LLC
Both are used to protect access to IP addresses lists and they can be
acquired for reading several times per packet. To reduce lock contention
it is better to use rmlock here.
Reviewed by: gnn (previous version)
Obtained from: Yandex LLC
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D3149
(UTC) rather than the archaic (GMT) in comments. Except where the
comments are making fun of people doing this (and pedants who insist
on the new terms).
Initially in_matrote() in_clsroute() in their current state was introduced by
r4105 20 years ago. Instead of deleting inactive routes immediately, we kept them
in route table, setting RTPRF_OURS flag and some expire time. After that, either
GC came or RTPRF_OURS got removed on first-packet. It was a good solution
in that days (and probably another decade after that) to keep TCP metrics.
However, after moving metrics to TCP hostcache in r122922, most of in_rmx
functionality became unused. It might had been used for flushing icmp-originated
routes before rte mutexes/refcounting, but I'm not sure about that.
So it looks like this is nearly impossible to make GC do its work nowadays:
in_rtkill() ignores non-RTPRF_OURS routes.
route can only become RTPRF_OURS after dropping last reference via rtfree()
which calls in_clsroute(), which, it turn, ignores UP and non-RTF_DYNAMIC routes.
Dynamic routes can still be installed via received redirect, but they
have default lifetime (no specific rt_expire) and no one has another trie walker
to call RTFREE() on them.
So, the changelist:
* remove custom rnh_match / rnh_close matching function.
* remove all GC functions
* partially revert r256695 (proto3 is no more used inside kernel,
it is not possible to use rt_expire from user point of view, proto3 support
is not complete)
* Finish r241884 (similar to this commit) and remove remaining IPv6 parts
MFC after: 1 month
