This is unnecessary when cross-building from Linux/macOS.
Additionally, cp -p appears to be broken on macOS Big Sur
(https://openradar.appspot.com/8957219).
For some unknown reason this commit appears to fix
freezes when building on macOS Big Sur.
This also fixes building in docker with volume mounts
with ACLs, since setting the ACL with cp -p fails otherwise.
Obtained From: CheriBSD
Tested By: gnn (macOS Big Sur), Nathaniel Wesley Filardo (docker)
Reviewed By: jrtc27, imp
Differential Revision: https://reviews.freebsd.org/D28267
Older glibc headers did some very nasty things that have since been
sanitised. We could also fix this by adding a linux/getopt.h wrapper
alongside the existing common/getopt.h that #undef's __need_getopt, but
that seems a little more hacky and complicated.
Reviewed by: arichardson
WITHOUT_LIBTHR has been broken for a little over five years now, since the
xz 5.2.0 update introduced a hard liblzma dependency on libthr, and building
a useful system without threading support is becoming increasingly more
difficult.
Additionally, in the five plus years that it's been broken more reverse
dependencies have cropped up in libzstd, libsqlite3, and libcrypto (among
others) that make it more and more difficult to reconcile the effort needed
to fix these options.
Remove the broken options.
PR: 252760
Reviewed by: brooks, emaste, kib
Differential Revision: https://reviews.freebsd.org/D28263
Define a non-const static char EMSG[] = "" to avoid having to add
__DECONST() to all uses of EMSG. Also make current_dash a const char *
to fix this warning.
On little-endian PowerPC64, this prevented /usr/lib/clang/11.0.0 being
cleaned up completely after upgrading to clang 11.0.1.
Noticed by: pkubaj
MFC after: 4 weeks
X-MFC-With: r364284
The *w variants of ncurses directories went away, and the remaining names
build the widechar variants instead of non-widechar variants. As such, the
entire ncurses tree should be regenerated.
Key off of lib/ncurses/ncursesw being present and remove the whole ncurses
hierarchy if it is.
Reviewed by: emaste (IRC)
If we set STRIPBIN, we also have to set XSTRIPBIN since we otherwise
use the host /usr/bin/strip during buildworld. However, this does not
work on macOS since /usr/bin/strip doesn't handle ELF binaries.
As suggested in D27598. This also supports MK_WERROR.clang=no and
MK_WERROR.gcc=no to support the existing NO_WERROR.<compiler> uses.
Reviewed By: brooks
Differential Revision: https://reviews.freebsd.org/D27601
With this change and D27598 make kernel-toolchain no longer emits any
warnings for me.
Reviewed By: emaste
Differential Revision: https://reviews.freebsd.org/D27599
We've created a new pf_ruleset.c file for pfctl and no longer use the
kernel vrsion, but the build system doesn't handle this dependency
change correctly. Delete the dependency file if it contains the kernel
version of the file.
MFC after: 2 weeks
Unconditionally install bsdgrep as grep, bootstrap or not. Remove all
build glue and stop installing both gnugrep and libgnuregex now that
all consumers of the latter are gone.
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D27732
GDB 6.1.1 was released in June 2004 and is long obsolete. It does not
support all of the architectures that FreeBSD does, and imposes
limitations on the FreeBSD kernel build, such as the continued use of
DWARF2 debugging information.
It was kept (in /usr/libexec/) only for use by crashinfo(8), which
extracts some basic information from a kernel core dump after a crash.
Crashinfo already prefers gdb from port/package if installed.
Future work may add kernel debug support to LLDB or find another path
for crashinfo's needs, but in any case we do not want to ship the
excessively outdated GDB in FreeBSD 13.
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27610
This was introduced and then disabled by default primarily to avoid dealing
with bugs in libgnuregex. rS363823 switched to using libregex for it, so
let's just rip the option out now so we can make sure we're getting tested
with libregex via bsdgrep.
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D27476
When invoked as "ping6", ping will now attempt to use ICMPv6 for hostnames
that resolve both IPv4 and IPv6 addresses.
Reviewed by: bz, manu
MFC-With: r368045
Differential Revision: https://reviews.freebsd.org/D27384
Also fix the run by setting up the environment in non-deprecated way.
Always run with --debug to understand better what sort of stuff is happening in
the background. Also split out the bmake bootstrap stage (takes about 31s on
ubuntu, but 1m14 on macOS?)
Drops the dependency on coreutils (realpath, nproc) and thus (?) fixes macOS to
be just as fast (4 logical cores vs 2 physical cores before, go figure.)
Reviewed by: arichardson
There is now a single ping binary, which chooses to use ICMP or ICMPv4
based on the -4 and -6 options, and the format of the address.
Submitted by: Ján Sučan <sucanjan@gmail.com>
Sponsored by: Google LLC (Google Summer of Code 2019)
MFC after: Never
Differential Revision: https://reviews.freebsd.org/D21377
after r367304 and r367324, when WITH_LLVM_CXXFILT is enabled.
Noticed by: "Herbert J. Skuhra" <herbert@gojira.at>
MFC after: 3 days
X-MFC-With: r367304
There are two options:
- WITH_INIT_ALL_ZERO: Zero all variables on the stack.
- WITH_INIT_ALL_PATTERN: Initialize variables with well-defined patterns.
The exact pattern are a compiler implementation detail and vary by type.
They are somewhat documented in the LLVM commit message:
https://reviews.llvm.org/rL349442
I've used WITH_INIT_ALL_* to match Microsoft's InitAll feature rather
than naming them after the LLVM specific compiler flags.
In a range of consumer products, options like these are used in
both debug and production builds with debugs builds using patterns
(intended to provoke crashes on use of uninitialized values) and
production using zeros (deemed more likely to lead to harmless
misbehavior or NULL-pointer dereferences).
Reviewed by: emaste
Obtained from: CheriBSD
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D27131
Since elftoolchain's cxxfilt is rather far behind on features, and we
ran into several bugs, add an option to use llvm-cxxfilt as an drop-in
replacement.
It supports the same options as elftoolchain cxxfilt, though it doesn't
have support for old ARM (C++ Annotated Reference Manual, not the CPU)
and GNU v2 manglings. But these are irrelevant in 2020.
Note: as we already compile the required libraries as part of libllvm,
this will not add any significant build time either.
PR: 250702
Reviewed by: emaste, yuri
Differential Revision: https://reviews.freebsd.org/D27071
MFC after: 2 weeks
This patch also introduces an environment variable BE_UTILITY,
which can be used to specify the utility to use for managing
ZFS boot environments (which can be either bectl or beadm).
While here, fix some typos in the manual page and
remove beadm from section "SEE ALSO".
Reviewed by: bcr, kevans, rpokala
Approved by: will
Differential Revision: https://reviews.freebsd.org/D21111
It turns out that without /dev/null beinstall is not able to complete and
instead exits with messages similar to these:
--------------------------------------------------------------
>>> Installing kernel GENERIC completed on Sun Oct 25 17:47:37 CET 2020
--------------------------------------------------------------
/tmp/beinstall.JleGoP/mnt: Inspecting dirs /usr/src /usr/obj/usr/src/amd64.amd64
--- installworld ---
make[1]: "/usr/obj/usr/src/amd64.amd64/toolchain-metadata.mk" line 1: Using cached toolchain metadata from build at t480 on Sun Oct 25 15:53:28 CET 2020
make[2]: "/dev/null" line 2: Need an operator
make[2]: Fatal errors encountered -- cannot continuemake[1]: "/usr/src/Makefile.inc1" line 593: CPUTYPE global should be set with ?=.
Cleaning up ...
umount -f /tmp/beinstall.JleGoP/mnt/usr/src /tmp/beinstall.JleGoP/mnt/usr/obj/usr/src/amd64.amd64 /tmp/beinstall.JleGoP/mnt
Destroyed successfully
error: Installworld failed!
Upon a bit of debugging, it turns out that /dev/null inside the chroot
environment is full random bytes, which cause "make -f /dev/null" to
misbehave. Mounting a proper devfs inside the chroot seems to be the most
appropriate way to fix it.
will@ also noted that this change requires that whatever is needed in devfs
must exist in the old kernel.
Approved by: will
MFC after: 2 week
Differential Revision: https://reviews.freebsd.org/D26944
The Ubuntu /bin/sh (dash) removes all environment variables that contain
characters outside the [a-zA-Z0-9_] range and this breaks the bmake tests that
run as part of bootstrapping bmake.
This can be reverted when the bmake tests have been updated.
This makes it possible to compile on non-FreeBSD systems since make will
usually be GNU make there. Even if they include bmake, it will often
either be a broken version or too old to build FreeBSD.
This should be the last commit needed to compile FreeBSD on Linux+macOS.
After over two years, I've finally managed to upstream all our local CheriBSD
changes to allow building on Linux (and as a result of being reviewed by more
people they are slightly less ugly than they were before).
It should now be possible to run the following to build on Linux+macOS if you
have LLVM/Clang 10 or newer installed:
MAKEOBJDIRPREFIX=/somewhere ./tools/build/make.py TARGET=amd64 TARGET_ARCH=amd64 buildworld
I have only tested macOS 15, Ubuntu 18.04 and openSUSE Leap, but other Linux
distributions might also work (as long as they ship a recent GLibc and compiler).
Reviewed By: emaste (should be fine to commit to tools/)
Differential Revision: https://reviews.freebsd.org/D16767
The current default is provided in various Makefile.inc in some top-level
directories and covers a good portion of the tree, but doesn't cover parts
of the build a little deeper (e.g. libcasper).
Provide a default in src.sys.mk and set WARNS to it in bsd.sys.mk if that
variable is defined. This lets us relatively cleanly provide a default WARNS
no matter where you're building in the src tree without breaking things
outside of the tree.
Crunchgen has been updated as a bootstrap tool to work on this change
because it needs r365605 at a minimum to succeed. The cleanup necessary to
successfully walk over this change on WITHOUT_CLEAN builds has been added.
There is a supplemental project to this to list all of the warnings that are
encountered when the environment has WARNS=6 NO_WERROR=yes:
https://warns.kevans.dev -- this project will hopefully eventually go away
in favor of CI doing a much better job than it.
Reviewed by: emaste, brooks, ngie (all earlier version)
Reviewed by: emaste, arichardson (depend-cleanup.sh change)
Differential Revision: https://reviews.freebsd.org/D26455
(default: WITH_GH_BC) and 12-STABLE (default: WITHOUT_GH_BC).
Since the new implementation of bc and dc is optionally available in
12-STABLE, I intend to MFC these descriptions for inclusion in 12.2.
MFC after: 3 days
In D12421, the ability to compile stand/ in little-endian was added, with the
intention to extend loader.kboot to run in Petitboot.
However, no further work was done, as the kernel then gained self-execution
capabilities as Petitboot was taught to load FreeBSD kernels directly.
The FreeBSD installer on powerpc64 (on POWER8 and POWER9) uses
/boot/etc/kboot.conf instead of loader.
As this option does nothing but cause stand/ to be miscompiled and actively
causes confusion, remove it.
(I have a functioning petitboot loader in my local tree, however, it turned
out to be quite inconvient to use due to the current petitboot plugin design
so I put it on hold.)
Reviewed by: emaste, imp, jhibbits
Sponsored by: Tag1 Consulting, Inc.
Differential Revision: https://reviews.freebsd.org/D26430
Currently, WITHOUT_PORTSNAP forces WITHOUT_FREEBSD_UPDATE because the
latter relies on phttpget, which lives inside the portsnap build bits.
Remove the dependency between these two options by moving phttpget out into
^/libexec and building/installing it if either WITH_PORTSNAP or
WITH_FREEBSD_UPDATE.
Future work could remove the conditional if it's decided that users will use
it independently of either the current in-base consumers.
Reported by: swills
Reviewed by: jilles, emaste
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D26255
This allows use of the standard src.conf configuration for controlling
whether the tree is cleaned before build or not. The default is still
to clean.
Setting either NOCLEAN or NO_CLEAN will mention the new src.conf option.
NOCLEAN remains a .warning, while for now NO_CLEAN is .info.
Reviewed by: bdrewery (earlier version)
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D22762
We have some hacks to remove stale dependency files for NO_CLEAN
builds that are missed by make's dependency handling. These are
intended to upport ongoing NO_CLEAN builds, and are no longer needed
after a sufficient amount of time elapses.
MK_MALLOC_PRODUCTION option on -CURRENT.
Also, for the sake of backwards compatibility, support the old way of
enabling 'production malloc', e.g. by adding a define in make.conf(5).
MFC after: 1 week
X-MFC-With: r365371
For historical reasons, defining MALLOC_PRODUCTION in /etc/make.conf has
been used to turn off potentially expensive debug checks and statistics
gathering in the implementation of malloc(3).
It seems more consistent to turn this into a regular src.conf(5) option,
e.g. WITH_MALLOC_PRODUCTION / WITHOUT_MALLOC_PRODUCTION. This can then
be toggled similar to any other source build option, and turned on or
off by default for e.g. stable branches.
Reviewed by: imp, #manpages
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D26337
-DNO_CLEAN builds have had trouble across the OpenZFS import. It's not
worth the effort to try to address this with any granularity; instead,
just trigger on a .depend file indicating a tree from before the import,
and remove the whole cddl object tree.
Reviewed by: mmacy, kevans
Differential Revision: https://reviews.freebsd.org/D26189
The most awkward bit in this patch is the bootstrapping of m4:
We can't simply use the host version of m4 since that is not compatible
with the flags passed by lex (at least on macOS, possibly also on Linux).
Therefore we need to bootstrap m4, but lex needs m4 to build and m4 also
depends on lex (which needs m4 to generate any files). To work around this
cyclic dependency we can build a bootstrap version of m4 (with pre-generated
files) then use that to build the real m4.
This patch also changes the xz/unxz/dd tools to always use the host version
since the version in the source tree cannot easily be bootstrapped on macOS
or Linux.
Reviewed By: brooks, imp (earlier version)
Differential Revision: https://reviews.freebsd.org/D25992
In most cases this simply builds the file from lib/libc for missing
functions (e.g. strlcpy on Linux etc.). In cases where this is not possible
I've added an implementation to tools/build/cross-build.
The fgetln.c/fgetwln.c/closefrom.c compatibility code was obtained from
https://gitlab.freedesktop.org/libbsd/libbsd, but I'm not sure it makes
sense to import it into to contrib just for these three bootstrap files.
Reviewed By: brooks
Differential Revision: https://reviews.freebsd.org/D25978
These headers are required in order to build the bootstrap tools on macOS
and Linux. A follow-up commit will add implementations of functions that
don't exist on those operating systems to -legacy when bootstrapping.
Reviewed By: brooks
Differential Revision: https://reviews.freebsd.org/D14316
Although I can't reproduce it, others are seeing different lex/yacc
programs always regenerated after my change to copy rather than
symlink the files. The reported fix is to add '-p' to the copies.
Since it doesn't hurt, go head and add it, though the reasons for
this mattering remain at best obscure and poorly articulated.
The -P flag is required by POSIX so we don't have to care whether pwd is
a shell builtin or not. This also allows removing pwd from the list of
bootstrap tools since all shells we care about for building have a
builtin pwd command. This effectively reverts r364190.
Suggested By: rgrimes, jrtc27
After r364166 and r364174, crunchgen needs a pwd binary in $PATH instead
of using a hardcoded absolute path. This commit is needed for
BUILD_WITH_STRICT_TMPPATH builds (currently not on by default).
make copies instead.
There's too many times that we can't run the new binaries with old
libraries. Making the links when things are known to be 'safe' is a
nice optimization, but a copy of all the binaries is only 30MB, so
saving the copies at the cost of increased support when new symbols
are added and used as part of the bootstrap seems to be unwise.
There may be additional optimizations possible here, especially for
!FreeBSD hosts. However, that's beyond the scope of the problem I'm
trying to fix with make failing mid-way through an installworld across
change r363679. This optimization there caused us to run a new binary
with an old library once a new make was installed due to the symbolic
link. One could just copy make, but then other binaries fail as well,
so rather than play whack-a-mole, I opted to take us back to the old
way. Before r340157 or so we did copies (thogh of a lot fewer
artifacts), and we didn't have issues like this.
Reviewed by: arichards@
Differential Revision: https://reviews.freebsd.org/D25967
llvmorg-10.0.1-rc2-0-g77d76b71d7d.
Also add a few more llvm utilities under WITH_CLANG_EXTRAS:
* llvm-dwp, a utility for merging DWARF 5 Split DWARF .dwo files into
.dwp (DWARF package files)
* llvm-size, a size(1) replacement
* llvm-strings, a strings(1) replacement
MFC after: 3 weeks
* bugpoint.1
* clang.1
* llc.1
* lldb.1
* lli.1
* llvm-ar.1
* llvm-as.1
* llvm-bcanalyzer.1
* llvm-cov.1
* llvm-diff.1
* llvm-dis.1
* llvm-dwarfdump.1
* llvm-extract.1
* llvm-link.1
* llvm-mca.1
* llvm-nm.1
* llvm-pdbutil.1
* llvm-profdata.1
* llvm-symbolizer.1
* llvm-tblgen.1
* opt.1
Add newly generated manpages for:
* llvm-addr2line.1 (this is an alias of llvm-symbolizer)
* llvm-cxxfilt.1
* llvm-objcopy.1
* llvm-ranlib.1 (this is an alias of llvm-ar)
Note that llvm-objdump.1 is an exception, as upstream has both a plain
.1 file, and a .rst variant. These will have to be reconciled upstream
first.
MFC after: 3 days
clang-format is enabled conditional on either WITH_CLANG_EXTRAS or
WITH_CLANG_FORMAT. Some sources in libclang are build conditional on
either rule, and obviously the clang-format binary itself depends on the
rule.
clang-format could still use a manual page.
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D25427
libucl comes with a Lua library binding. Build it into flua.
This lets us parse/generate config files in the various formats supported by
libucl with flua. For example, the following script will detect the format of
an object written to stdin as one of UCL config, JSON, or YAML and write it to
stdout as pretty-printed JSON:
local ucl = require('ucl')
local parser = ucl.parser()
parser:parse_string(io.read('*a'))
local obj = parser:get_object()
print(ucl.to_format(obj, 'json'))
Reviewed by: kevans, pstef
Approved by: mmacy (mentor)
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D25009
Prepare support to be able to handle font data in loader, consolidate
data structures to sys/font.h and update vtfontcvt.
vtfontcvt update is about to output set of glyphs in form of C source,
the implementation does allow to output compressed or uncompressed font
bitmaps.
Reviewed by: bcr
Differential Revision: https://reviews.freebsd.org/D24189
As of r361857 all BINUTILS options are disabled by default - ports
have been changed to depend on binutils if they require GNU as, and
all base system assembly files have been switched to use Clang's
integrated assembler.
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
The CU-SeeMe videoconferencing client and associated protocol is at this
point a historical artifact; there is no need to retain support for this
protocol today.
Reviewed by: philip, markj, allanjude
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D24790
Save and restore (also known as suspend and resume) permits a snapshot
to be taken of a guest's state that can later be resumed. In the
current implementation, bhyve(8) creates a UNIX domain socket that is
used by bhyvectl(8) to send a request to save a snapshot (and
optionally exit after the snapshot has been taken). A snapshot
currently consists of two files: the first holds a copy of guest RAM,
and the second file holds other guest state such as vCPU register
values and device model state.
To resume a guest, bhyve(8) must be started with a matching pair of
command line arguments to instantiate the same set of device models as
well as a pointer to the saved snapshot.
While the current implementation is useful for several uses cases, it
has a few limitations. The file format for saving the guest state is
tied to the ABI of internal bhyve structures and is not
self-describing (in that it does not communicate the set of device
models present in the system). In addition, the state saved for some
device models closely matches the internal data structures which might
prove a challenge for compatibility of snapshot files across a range
of bhyve versions. The file format also does not currently support
versioning of individual chunks of state. As a result, the current
file format is not a fixed binary format and future revisions to save
and restore will break binary compatiblity of snapshot files. The
goal is to move to a more flexible format that adds versioning,
etc. and at that point to commit to providing a reasonable level of
compatibility. As a result, the current implementation is not enabled
by default. It can be enabled via the WITH_BHYVE_SNAPSHOT=yes option
for userland builds, and the kernel option BHYVE_SHAPSHOT.
Submitted by: Mihai Tiganus, Flavius Anton, Darius Mihai
Submitted by: Elena Mihailescu, Mihai Carabas, Sergiu Weisz
Relnotes: yes
Sponsored by: University Politehnica of Bucharest
Sponsored by: Matthew Grooms (student scholarships)
Sponsored by: iXsystems
Differential Revision: https://reviews.freebsd.org/D19495
This option was added as a transition aide when symbol versioning was
first added. It was enabled by default in 2007 and is supported even
by the old GPLv2 binutils. Trying to disable it currently fails to
build in libc and at this point it isn't worth fixing the build.
Reported by: Michael Dexter
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D24637
instead of MK_KERBEROS. The reason for this change is some users
prefer to build FreeBSD WITHOUT_KERBEROS, wanting to retain the
Kerberos rc scripts to start/stop MIT Kerberos or Heimdal from ports.
PR: 197337
Reported by: Adam McDougall <ebay at looksharp.net>
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D24252
Include a temporarily compatibility shim as well for kernels predating
close_range, since closefrom is used in some critical areas.
Reviewed by: markj (previous version), kib
Differential Revision: https://reviews.freebsd.org/D24399
r359461 introduced this nifty script to centralize these things, so add
shm_open.c there to remove a total of one (1) bad example from
Makefile.inc1.
Looked over by: emaste
For head/, this will remain eternally default-on to maintain the status quo.
For stable/ branches, it should be flipped to default-off to maintain the
status quo.
There's value in being able to flip it one way or the other easily on head
or stable branches, whether you want to gain some performance back on head/
(for machines there's little chance you'll actually hit an assertion) or
potentially diagnose a problem with the version of llvm on an older branch.
Currently, stable branches get the CFLAGS+= -ndebug line uncommented; going
forward, they will instead have the default of LLVM_ASSERTIONS flipped.
Reviewed by: dim, emaste, re (gjb)
MFC after: 1 week
MFC note: flip the default of LLVM_ASSERTIONS
Differential Revision: https://reviews.freebsd.org/D24264
It's rather awkward to debug issues with the dependency cleanup hacks
when implemented via make. Add a cleanup shell script and move the
libomp hack there as an initial example.
Reviewed by: brooks
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D24228
In-tree gdb is essentially obsolete. We kept it for sparc64 (because
gdb in ports lacked sparc64 support) and as a fallback for crashinfo.
gdb was installed to /libexec on all archs other than sparc64, where the
WITHOUT_GDB_LIBEXEC option was default, with gdb installed to /usr/bin.
With sparc64's retirement WITH_GDB_LIBEXEC became the default for all
architectures, but it was still possible to set it off and install gdb
into /usr/bin.
As the next step in gdb's retirement, remove the option and install gdb
only into /libexec as the crashinfo fallback. We expect users to install
the gdb port or package for debugging. The in-tree gdb lacks support for
a number of supported architectures and does not support contemporary
DWARF debug info.
Reviewed by: jhb (earlier)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D24227
Now that LLD 10 is out, and required patches have landed, we are now ready
to finally switch away from the ancient in-tree ld.bfd.
Special thanks to Fangrui Song for many hours of work on getting the
32-bit powerpc lld ready for prime-time.
Reviewed by: emaste (earlier revision), jhibbits
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D24111
Having kyua in the base system will simplify automated testing in CI and
eliminates bootstrapping issues on new platforms.
The build of kyua is controlled by WITH(OUT)_TESTS_SUPPORT.
Reviewed by: emaste
Obtained from: CheriBSD
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D24103
autofs was introduced with FreeBSD 10.1 and is the supported method for
automounting filesystems. As of r296194 the amd man page claimed that it
is deprecated. Remove it from base now; the sysutils/am-utils port is
still available if necessary.
Discussed with: cy
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
It does extremely useful things like execute sendmail and spew dubiously
accurate factoids.
From the feedback, it seems like it is an essential utility in a modern unix
and not at all a useless bikeshed. How do those Linux people live without it?
Reverts r358561.
Now that we no longer have GCC 4.2.1 in the tree and can assume FreeBSD
is being built with a C++11 compiler available, we can use BSDL dtc
unconditionally and retire the GPL dtc.
GPL dtc now has FreeBSD CI support via Cirrus-CI to help ensure it
continues to build/work on FreeBSD and is available in the ports tree
if needed.
The copy of (copyfree licensed) libfdt that we actually use is in
sys/contrib/libfdt so the extra copy under contrib/dtc/libfdt can be
removed along with the rest of the GPL dtc.
Reviewed by: kevans, ian, imp, manu, theraven
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D23192
LLVM's libunwind is used on all FreeBSD-supported CPU architectures and
is a required component.
Reviewed by: brooks (earlier)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D23123
As described in Warner's email message[1] to the FreeBSD-arch mailing
list we have reached GCC 4.2.1's retirement date. At this time all
supported architectures either use in-tree Clang, or rely on external
toolchain (i.e., a contemporary GCC version from ports).
GCC 4.2.1 was released July 18, 2007 and was imported into FreeBSD later
that year, in r171825. GCC has served us well, but version 4.2.1 is
obsolete and not used by default on any architecture in FreeBSD. It
does not support modern C and does not support arm64 or RISC-V.
Thanks to everyone responsible for maintaining, updating, and testing
GCC in the FreeBSD base system over the years.
So long, and thanks for all the fish.
[1] https://lists.freebsd.org/pipermail/freebsd-arch/2020-January/019823.html
PR: 228919
Reviewed by: brooks, imp
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D23124
Use of binutils is being incrementally reduced. The specific binutils
are listed in the WITH_BINUTILS and WITHOUT_BINUTILS descriptions; there
is no need to list the specific tools again in the descriptions for the
_BOOTSTRAP options.
MFC after: 1 week
simple_httpd was granted a reprieve from the picobsd removal based on having
some reported user; it turns out this user isn't actually using the version
in base and merging their changes would be difficult at this point, so the
version in base will simply continue to rot. Retire it now, it may make a
comeback to ports with the improved version.
No notice issued because its current visibility has only been for ~3
months, and a notice has been previously issued about picobsd removal.
In order to do so we need to install the msdosfs headers to the bootstrap
sysroot and avoid includes of kernel headers that may not exist on every
host (e.g. sys/lockmgr.h). This change should allow bootstrapping of makefs
on FreeBSD 11+ as well as Linux and macOS.
We also have to avoid using the IO_SYNC macro since that may not be
available. In makefs it is only used to switch between calling
bwrite() and bdwrite() which both call the same function. Therefore we
can simply always call bwrite().
For our CheriBSD builds we always bootstrap makefs by setting
LOCAL_XTOOL_DIRS='lib/libnetbsd usr.sbin/makefs' and use the makefs binary
from the build tree to create a bootable disk image.
Reviewed By: brooks
Differential Revision: https://reviews.freebsd.org/D23201
and the headers. If the user decides to install the system without Casper
support, then the Casper functions are mocked, but they still exist in
the system.
PR: 242971
MFC after: 2 weeks
pc-sysinstall was moved from the base system to ports in r351781.
Submitted by: driesm.michiels gmail com
Differential Revision: https://reviews.freebsd.org/D21647
WITHOUT_BINUTILS and WITHOUT_BINUTILS_BOOTSTRAP previously included
claims about being unable to build if set. Those cautions are no longer
universally true, and most FreeBSD targets can function more or less
without enabling GNU Binutils. Just remove the cautions.
Sponsored by: The FreeBSD Foundation
GNU as 2.17.50 is currently required by amd64 and i386 for at least one
file that cannot be assembled by Clang's integrated assembler (IAS).
Other supported CPU architectures either use Clang IAS for all assembly
files, or rely on external toolchain.
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D23180
In the WITHOUT_ descriptions we don't need to mention that ld.bfd is
limited to powerpc. When WITHOUT_BINUTILS is specified ld.bfd is not
installed on any CPU architecture.
All archs except powerpc either use lld or require external toolchain.
powerpc still needs binutils ld to link 32-bit binaries.
Reviewed by: jhibbits
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D23107
Describe /usr/bin/cc etc. as links to the compiler, and don't conflate
WITHOUT_CLANG_IS_CC with installing GCC. Leave a reference to WITH_GCC
and WITHOUT_CLANG_IS_CC installing links to GCC, although this will be
removed in ~1.5 months when GCC 4.2.1 is removed from the tree.
Sponsored by: The FreeBSD Foundation
${WORLDTMP}/legacy/usr/libexec will only have libexec/ bits that we've
pushed as bootstrap tools, so this is generally safe to include prior to
PATH. The following are the ramifications of this change:
- BPATH addition gets us at least bootstrap flua in WMAKEENV path for
buildenv, for those earlier systems where it's bootstrapped still
- Reworked the sysent target to just set PATH and let it get worked out in
src.lua.mk or individual sysent makefiles -- this gives us back the
ability to overwrite LUA_CMD and use a different/external lua for these
targets. sysent can also now work cleanly in buildenv.
- tools/build/Makefile will now symlink the host flua into build's host
tools so that the above can work without needing to add the host's
/usr/libexec explicitly into TMPPATH.
Reviewed by: arichardson, brooks, imp (all slightly earlier version)
Differential Revision: https://reviews.freebsd.org/D22464
For libssp.so, rebuild stack_protector.c with FORTIFY_SOURCE stubs that just
abort built into it.
For libssp_nonshared.a, steal stack_protector_compat.c from
^/lib/libc/secure and massage it to maintain that __stack_chk_fail_local
is a hidden symbol.
libssp is now built unconditionally regardless of {WITH,WITHOUT}_SSP in the
build environment, and the gcclibs version has been disconnected from the
build in favor of this one.
PR: 242950 (exp-run)
Reviewed by: kib, emaste, pfg, Oliver Pinter (earlier version)
Also discussed with: kan
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D22943
This should help people examining src.conf(5) draw the connection between
the HTTPD knobs and the particular implementation we're installing,
simple_httpd.
Reported by: saken658 via GitHub
Summary:
Enable on powerpc64 and in lib/libclang_rt/Makefile change
MACHINE_CPUARCH to MACHINE_ARCH because on powerpc64
MACHINE_ARCH==MACHINE_CPUARCH so the 32-bit library overwrites 64-bit
library during installworld.
This patch doesn't enable any other libclang_rt libraries because they
need to be separately ported.
I have verified that games/julius (which fails on powerpc64 elfv2
without this change because of no libclang_rt profiling library) builds.
Test Plan: Ship it, test on powerpc and powerpcspe
Submitted by: pkubaj
Reviewed by: dim, jhibbits
Differential Revision: https://reviews.freebsd.org/D22425
MFC after: 1 month
X-MFC-With: r353358
flua is bootstrapped as part of the build for those on older
versions/revisions that don't yet have flua installed. Once upgraded past
r354833, "make sysent" will again naturally work as expected.
Reviewed by: brooks
Differential Revision: https://reviews.freebsd.org/D21894
Add lib/libzstd to _elftoolchain_libs
tools/build/Makefile needs to create the install dir for libzstd
Since this would make the line too long, rework to use a list
in one per line format (easier to add in future)
and dispense with the .for loop
Reviewed by: emaste bapt
Differential Revision: https://reviews.freebsd.org/D220134
rename the WITH_LOADER_VERIEXEC_PASS_MANFIEST description to its correct
name. Also correct a bunch of spelling errors in that description.
MFC after: 3 days
This provides a framework to define a template describing
a set of "variables of interest" and the intended way for
the framework to maintain them (for example the maximum, sum,
t-digest, or a combination thereof). Afterwards the user
code feeds in the raw data, and the framework maintains
these variables inside a user-provided, opaque stats blobs.
The framework also provides a way to selectively extract the
stats from the blobs. The stats(3) framework can be used in
both userspace and the kernel.
See the stats(3) manual page for details.
This will be used by the upcoming TCP statistics gathering code,
https://reviews.freebsd.org/D20655.
The stats(3) framework is disabled by default for now, except
in the NOTES kernel (for QA); it is expected to be enabled
in amd64 GENERIC after a cool down period.
Reviewed by: sef (earlier version)
Obtained from: Netflix
Relnotes: yes
Sponsored by: Klara Inc, Netflix
Differential Revision: https://reviews.freebsd.org/D20477
This directory is actually needed during make installworld and will prevent
to reinstall a system after make delete-old is done.
PR: 226137
Reported by: rakuco
MFC after: 3 days
picobsd/tinyware has had this compact HTTPD server for a long time, and some
people do use it. Move it out into usr.sbin well in advance of any action
being taken on picobsd.
This has been gated behind an HTTPD option defaulted to *off*, primarily for
two reasons:
1.) This code likely needs a good audit, as it's been living off in picobsd
land for a long time, and
2.) We don't currently ship an httpd and this may not be a welcome surprise.
Reviewed by: eugen
Differential Revision: https://reviews.freebsd.org/D21724
PowerPC64 still needs ld.bfd for 32-bit binaries/libraries.
This will be needed when ELFv2 becomes default, but there is no harm in
committing it already.
Reviewed by: jhibbits
Differential Revision: https://reviews.freebsd.org/D21136
PR/238816 initially addressed updates to usage() however the PR has
morphed into a shopping list of updates to usage() and man pages.
PR: 238816 (I added to the list during discussion)
MFC after: 1 week
libunwind and openmp to the upstream release_80 branch r363030
(effectively, 8.0.1 rc2). The 8.0.1 release should follow this within a
week or so.
MFC after: 2 weeks
Note llvm-ar is linked to llvm-ranlib since r311565. r348677 fixed
"make delete-old" issue with llvm-ar but missed it somehow.
Discussed with: emaste, jhb
r348504 moved llvm-symbolizer from the CLANG_EXTRAS knob to CLANG, but
the man page was still in the CLANG_EXTRAS section in
OptionalObsoleteFiles.inc.
Reported by: jhb
MFC after: 3 days
MFC with: r348504
After r348610 `make delete-old` was still removing llvm-ar and llvm-nm
(and associated man pages).
Reported by: jhb
Sponsored by: The FreeBSD Foundation
ASAN reports become a lot more useful with llvm-symbolizer in $PATH, and the
build is not much more time-consuming. The added benefit is that the
resulting reports will actually include symbol information; without, thread
trace information includes a bunch of addresses that immediately resolve to
an inline function in
^/contrib/compiler-rt/lib/sanitizer_common/sanitizer_common.h and take a
little more effort to examine.
Reviewed by: emaste
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D20484
does not ship a -lomp symlink. Also update OptionalObsoleteFiles for
this, and add 32-bit variants while here.
Submitted by: jbeich
PR: 237975
MFC after: 3 days
The current approach of injecting manifest into mac_veriexec is to
verify the integrity of it in userspace (veriexec (8)) and pass its
entries into kernel using a char device (/dev/veriexec).
This requires verifying root partition integrity in loader,
for example by using memory disk and checking its hash.
Otherwise if rootfs is compromised an attacker could inject their own data.
This patch introduces an option to parse manifest in kernel based on envs.
The loader sets manifest path and digest.
EVENTHANDLER is used to launch the module right after the rootfs is mounted.
It has to be done this way, since one might want to verify integrity of the init file.
This means that manifest is required to be present on the root partition.
Note that the envs have to be set right before boot to make sure that no one can spoof them.
Submitted by: Kornel Duleba <mindal@semihalf.com>
Reviewed by: sjg
Obtained from: Semihalf
Sponsored by: Stormshield
Differential Revision: https://reviews.freebsd.org/D19281
The WITH_PORT_BASE_{BINUTILS,GCC} options are used to prevent 'make check-old'
and 'make delete-old' from deleting files installed by the base/binutils
and base/gcc packages as normally one disables the in-tree variants
(e.g. WITHOUT_BINUTILS) when using these packages.
Reviewed by: bapt (earlier version)
Differential Revision: https://reviews.freebsd.org/D19483
* Set MK_OPENMP to yes by default only on amd64, for now.
* Bump __FreeBSD_version to signal this addition.
* Ensure gcc's conflicting omp.h is not installed if MK_OPENMP is yes.
* Update OptionalObsoleteFiles.inc to cope with the conflicting omp.h.
* Regenerate src.conf(5) with new WITH/WITHOUT fragments.
Relnotes: yes
PR: 236062
MFC after: 1 month
X-MFC-With: r344779
This initial integration takes googlemock/googletest release 1.8.1, integrates
the library, tests, and sample unit tests into the build.
googlemock/googletest's inclusion is optionally available via `MK_GOOGLETEST`.
`MK_GOOGLETEST` is dependent on `MK_TESTS` and is enabled by default when
built with a C++11 capable toolchain.
Google tests can be specified via the `GTESTS` variable, which, in comparison
with the other test drivers, is more simplified/streamlined, as Googletest only
supports C++ tests; not raw C or shell tests (C tests can be written in C++
using the standard embedding methods).
No dependent libraries are assumed for the tests. One must specify `gmock`,
`gmock_main`, `gtest`, or `gtest_main`, via `LIBADD` for the program.
More information about googlemock and googletest can be found on the
Googletest [project page](https://github.com/google/googletest), and the
[GoogleMock](https://github.com/google/googletest/blob/v1.8.x/googlemock/docs/Documentation.md)
and
[GoogleTest](https://github.com/google/googletest/tree/v1.8.x/googletest/docs)
docs.
These tests are originally integrated into the build as plain driver tests, but
will be natively integrated into Kyua in a later version.
Known issues/Errata:
* [WhenDynamicCastToTest.AmbiguousCast fails on FreeBSD](https://github.com/google/googletest/issues/2172)
Reviewed by: asomers
Approved by: emaste (mentor)
MFC after: 2 months
Differential Revision: https://reviews.freebsd.org/D19551
is specified.
When WITHOUT_IPFILTER is specified, delete-old-files fails to delete
the optional rc.d files from above. Fix this.
WITHOUT_IPFILTER fails to delete the ipfilter.5 optional file during
delete-old-files. Fix this.
Reported by: Dmitry Luhtionov <dmitryluhtionov@gmail.com>
MFC after: 1 week
UEFI related headers were copied from edk2.
A new build option "MK_LOADER_EFI_SECUREBOOT" was added to allow
loading of trusted anchors from UEFI.
Certificate revocation support is also introduced.
The forbidden certificates are loaded from dbx variable.
Verification fails in two cases:
There is a direct match between cert in dbx and the one in the chain.
The CA used to sign the chain is found in dbx.
One can also insert a hash of TBS section of a certificate into dbx.
In this case verifications fails only if a direct match with a
certificate in chain is found.
Submitted by: Kornel Duleba <mindal@semihalf.com>
Reviewed by: sjg
Obtained from: Semihalf
Sponsored by: Stormshield
Differential Revision: https://reviews.freebsd.org/D19093
It is protected by MK_NLS. If it should really be optional then
it needs to be documented as such in share/mk/bsd.README and
.sinclude used where needed.
This fixes a regression from r335011.
PR: 232527
Submitted by: jarrod@downtools.com.au
Reported by: ktullavik@gmail.com
MFC after: 3 days
These libraries don't compile on non-C++-11 capable compilers, e.g., g++ 4.2.1
and its corresponding implementation of the c++ library, i.e., libstdc++.
Blacklist compilation on all non-C++-11 capable compilers and give others the
option of opting out of building/installing gmock/gtest via MK_GOOGLETEST.
This option is controlled by MK_CXX and MK_TESTS, as ATF compilation is.
- Drop profile libraries; MK_PROFILE=no is set in all Makefile's.
- Correct library path to libmlx5.so.1 and libibverbs.so.1
MFC after: 5 days
MFC with: 344207
- Add missing /usr/sbin/pmc, pmcformat.h, libpmcstat.h and pmc.haswellxeon.3
to the list.
- Correct man page section for pmcstudy.8.
- Include recently added libipt and libopencsd for corresponding TARGET_ARCH
MFC after: 5 days
OptionalObsoleteFiles.inc
Note: only files with conditional installation logic were
included from the PR.
PR: 233046
Submitted by: <rozhuk.im@gmail.com>
MFC after: 5 days
Building binaries as PIE allows the executable itself to be loaded at a
random address when ASLR is enabled (not just its shared libraries).
With this change PIE objects have a .pieo extension and INTERNALLIB
libraries libXXX_pie.a.
MK_PIE is disabled for some kerberos5 tools, Clang, and Subversion, as
they explicitly reference .a libraries in their Makefiles. These can
be addressed on an individual basis later. MK_PIE is also disabled for
rtld-elf because it is already position-independent using bespoke
Makefile rules.
Currently only dynamically linked binaries will be built as PIE.
Discussed with: dim
Reviewed by: kib
MFC after: 1 month
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D18423
It's installed to /usr/sbin, not to /usr/bin (and was always here).
While here, add missing manpages and /var/yp directory to the list.
MFC after: 1 week
Add all the files under /usr/share/examples to the MK_EXAMPLES
section. OLD_DIRS entries are not removed if they're not empty so
prior to this change WITHOUT_EXAMPLES didn't have significant effect
on the updated system.
PR: 228484
Submitted by: Dmitry Wagin <dmitry.wagin@ya.ru> (original patch)
MFC after: 1 week
Add two more entries for WITHOUT_SENDMAIL install. The /var/spool/clientmqueue
entry would be deleted only if there are no files/dirs in it, so the
content generated during previous lifecycle of the system is safe
PR: 228484
Submitted by: Dmitry Wagin <dmitry.wagin@ya.ru>
MFC after: 1 week
Add asn1_compile, make-roken, kcc, and slc to the OptionalObsoleteFiles.inc
so they would be removed during delete-old stage if the new world is built
without Kerberos support.
PR: 230725
Submitted by: Dmitry Wagin <dmitry.wagin@ya.ru>
MFC after: 1 week
devices like mice, keyboards, bt-audio, ...
This script currently allows scanning for nearby devices, adds one to
/etc/bluetooth/hosts, adds an entry to hcsecd's conf and if it is a HID, add an
entry to bthidd's configs, as well.
Submitted by: erdgeist <erdgeist@erdgeist.org>
Approved by: bapt
MFC after: 2 weeks
Differential Revision: D3778
Reviewers: bapt, emax
usr/share/dict/eign is removed unconditionally as of r319664, so it no
longer needs to be in OptionalObsoleteFiles.
PR: 230353
Reported by: philippe.michel7 sfr.fr
This is primarily aimed at failed updates due to package conflicts, and
affects treatment of failed updates. Whereas before potentially a large
number of packages would need to be synced for each attempt, they can now
be persisted. Requires rsync. There may be better ways to implement this,
e.g. using secondary cache path that is only used on followup attempts and
then wiped on success, which avoids polluting current cache.
MK_AUDIT already controls auditd(8), praudit(1), etc. It should also control
the audit test suite.
Submitted by: ngie
MFC after: 2 weeks
Pull Request: https://github.com/freebsd/freebsd/pull/240
/usr/sbin/audit(dist)?d are only installed if ${MK_AUDIT} == yes. Their
supporting scripts should only be installed in those instances as well.
Submitted by: ngie
Reviewed by: emaste
MFC after: 2 weeks
Pull Request: https://github.com/freebsd/freebsd/pull/242
The removal (and creation of a port) has been pre-announced in UPDATING
1 month ago. Packages are available for all supported FreeBSD vesions.
I did not think that another entry in UPDATING is required to note the
actual removal.
No MFC is planned - CTM shall be kept in base for all releases up to 12.x.
Reviewed by: rgrimes
Approved by: imp, bcr (manpages)
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D17935
GNU binutils ld.bfd 2.17.50 does not support ifuncs and produces broken
binaries when ifuncs are in use. When LLD_IS_LD is default we have an
ifunc-capable system linker and can just avoid installing ld.bfd.
Reported by: theraven
Reviewed by: bz
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D18340
Some WITH_/WITHOUT_ defaults will likey change in the future (e.g. as we
migrate to copyfree base system components).
Add non-default descriptions for the benefit of WIP branches.
llvm-profdata is used with llvm-cov for code coverage (although llvm-cov
can also operate independently in a gcov-compatible mode).
Although llvm-profdata can be used independently of llvm-cov it makes
sense to group these under one option.
Also handle these in OptionalObsoleteFiles.inc while here.
Sponsored by: The FreeBSD Foundation
llvm-cov provides a gcov-compatible interface when invoked as gcov.
Reviewed by: dim, markj
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D17923
The linker's -z now flag sets the DF_BIND_NOW flag, which signals to the
runtime loader that all relocation processing should be performed at
process startup rather than on demand. In combination with lld's
default of enabling relro this causes the GOT to be made read-only when
the process starts, preventing straightforward GOT overwrite attacks.
Shawn Webb discovered a failure on HardenedBSD with BIND_NOW and ifunc
use, which resulted in my rtld fix in r340137. Add a BIND_NOW knob as
it is trivial to do so and is a useful ELF hardening feature. This
change is equivalent to HardenedBSD's but not identical as there are
other diffs/conflicts nearby.
Note that our ELF Tool Chain readelf does not currently decode the
DF_BIND_NOW flag - see PR232983.
Reviewed by: brooks
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D17846
Inheriting $PATH during the build phase can cause the build to fail when
compiling on a different system due to missing build tools or incompatible
versions somewhere in $PATH. This has cause build failures for us before
due to the jenkins slaves still running FreeBSD 10.
Listing the tools we depend on explicitly instead of just using whatever
happens to be in $PATH allows us to check that we don't accidentally add a
new build dependency.
All tools that do no need to be bootstrapped will now be symlinked to
${WORLDTMP}/legacy/bin and during the build phase $PATH will only contain
${WORLDTMP}. There is also a new variable "BOOTSTRAP_ALL_TOOLS" which can
be set to force compiling almost all bootstrap tools instead of symlinking
them. This will not bootstrap tools such as cp,mv, etc. since they may be
used during the build and for those we should really only be using POSIX
compatible options.
Furthermore, this change is required in order to be able to build on
non-FreeBSD hosts. While the same binaries may exist on Linux/MacOS they
often accept different flags or produce incompatible output.
Approved By: brooks (mentor)
Differential Revision: https://reviews.freebsd.org/D16815
You should not be using DES. You should not have been using DES for the
past 30 years.
The ed DES-CBC scheme lacked several desirable properties of a sealed
document system, even ignoring DES itself. In particular, it did not
provide the "integrity" cryptographic property (detection of tampering), and
it treated ASCII passwords as 64-bit keys (instead of using a KDF like
scrypt or PBKDF2).
Some general approaches ed(1) users might consider to replace the removed
DES mode:
1. Full disk encryption with something like AES-XTS. This is easy to
conceptualize, design, and implement, and it provides confidentiality for
data at rest. Like CBC, it lacks tampering protection. Examples include
GELI, LUKS, FileVault2.
2. Encrypted overlay ("stackable") filesystems (EncFS, PEFS?, CryptoFS,
others).
3. Native encryption at the filesystem layer. Ext4/F2FS, ZFS, APFS, and
NTFS all have some flavor of this.
4. Storing your files unencrypted. It's not like DES was doing you much
good.
If you have DES-CBC scrambled files produced by ed(1) prior to this change,
you may decrypt them with:
openssl des-cbc -d -iv 0 -K <key in hex> -in <inputfile> -out <plaintext>
Reviewed by: allanjude, bapt, emaste
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D17829
In the last decade(s) we have seen both short term or long term projects
committed to the tree which were considered or even marked "experimental".
While out-of-tree development has become easier than it used to be in
CVS times, there still is a need to have the code shipping with HEAD but
not enabled by default.
While people may think about VIMAGE as one of the recent larger, long term
projects, early protocol implementations (before they are standardised)
are others. (Free)BSD historically was one of the operating systems
which would have running code at early stages and help develop and
influence standardisation and the industry.
Give developers an opportunity to be more pro-active for early adoption
or running large scale code changes stumbling over each others but not
the user's feet. I have not added the option to NOTES in order to avoid
breaking supported option builds, which require constant compile testing.
Discussed with: people in the corridor
These are needed for .ctors/.dtors and .jcr handling. The former needs
all the function pointers to be called in the correct order from the
.init/.fini section. The latter just needs to call a gcj specific function
if it exists with a pointer to the start of the .jcr section.
This is currently disabled until __dso_handle support is added.
Reviewed by: emaste
MFC after: 1 month
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D17587
WITHOUT_LOADER_LUA is only needed since we turned it off by default on
powerpc and sparc64 in r338203. Same with
WITHOUT_LOADER_GEIL. WITH_NVME, WITHOUT_NVME, WITH_LOADER_FORCE_LE
have been needed since they were added.
Without this we get spurious output during boot as we try to run
nonexistant HyperV scripts on non-x86 models.
Reviewed by: kib
Approved by: re (gjb)
Differential Revision: https://reviews.freebsd.org/D17211
Since r326030 strings is installed unconditionally so should not be
removed when WITHOUT_TOOLCHAIN is set.
Reported by: Dan McGregor
Approved by: re (kib)
Sponsored by: The FreeBSD Foundation
Make the building of drm dependent on MK_MODULE_DRM and the building
of module drm2 on MK_MODULE_DRM2. The defaults are unchanged.
Approved by: re@ (gjb)
Differential Review: https://reviews.freebsd.org/D16894
vermaden (maintainer of beadm) points out the following inconsistencies:
- "missing command" is not printed prior to usage if the error is simply a
missing command; this should be obvious from the context
- "bectl rename" isn't using the "don't unmount" flag (zfs rename -u), so
the active BE can't be renamed. It doesn't make sense in our context to
*not* use -u, so use it.
Documentation updates reflect the above and note an inconsistency with the
'destroy' command that is consistent with other parts of the base system.
A fix for libbe(3) not properly being installed to /lib is included.
SHLIBDIR should have been added when it was moved in r337995.
Approved by: re (kib)
Checking for any include below ${SRCTOP}/sys is too strict and breaks
e.g. mkimg which includes sys/sys/disk. ABI issues will only be caused
by including headers in sys/sys since they might not match the host.
Approved By: jhb (mentor)
Suggested By: imp
This has two advantages:
1) We no longer create lots of empty directories that are not needed
2) This is a requirement for building on non-FreeBSD hosts since mtree will
only exist after the bootstrap-tools phase there.
Aproved By: jhb (mentor)
Differential Revision: https://reviews.freebsd.org/D16773
This can cause surprising errors if the build tools is built against
headers that don't match the host system. It is also required in order
to allow building on non-FreeBSD systems where the headers in
/usr/include/sys are usually completely incompatible with those in the
source tree.
I added an error to Makefile.boot if this is done and found this was
only the case in libnv. With this error in the Makefile ABI breakages
such as r336019 should no longer be possible.
Reviewed By: bdrewery, kevans
Approved By: jhb (mentor)
Differential Revision: https://reviews.freebsd.org/D16186
BPF (eBPF) is an independent instruction set architecture which is
introduced in Linux a few years ago. Originally, eBPF execute
environment was only inside Linux kernel. However, recent years there
are some user space implementation (https://github.com/iovisor/ubpf,
https://doc.dpdk.org/guides/prog_guide/bpf_lib.html) and kernel space
implementation for FreeBSD is going on
(https://github.com/YutaroHayakawa/generic-ebpf).
The BPF target support can be enabled using WITH_LLVM_TARGET_BPF, as it
is not built by default.
Submitted by: Yutaro Hayakawa <yhayakawa3720@gmail.com>
Reviewed by: dim, bdrewery
Differential Revision: https://reviews.freebsd.org/D16033
