with EBUSY and a cdrom is not mounted at /cdrom, sysinstall fails to
treat it as an error and thinks that the disk mounted ok. However, it
doesn't find a cdrom.inf file so it complains. Later when it tries to
unmount the disk due to a mediaClose() umount(2) returns an error, and it
never clears its internal mounted flag. The fix here is to properly
handle EBUSY as an error if there isn't a CD already mounted at /cdrom.
- Add a new CDROMInitQuiet variable that can be used to shut up the dialog
box about the mount(2) system call failing when trying to mount a CD-ROM.
This is used by the feature described below.
- When using a fixit CD, first try to see if we can mount the disc in the
drive now and use it as a fixit CD. If not, then prompt the user to
insert the disc and try again. If we do succeed on the first "silent"
probe then we don't ask the user to eject the disk after leaving fixit
mode.
- Add a simple file existence test to make sure that the disc that we mount
really is a livefs disc.
- Explicitly switch back to ttyv0 when using the standard console after
the fixit shell dies. Previously this behavior worked accidentally
because all the fixit modes popped up a dialog box which contained a
hidden switch to ttyv0.
MFC after: 1 day
While version 4 entries are architecture-independent, we
also store old (version 3) entries in native byte order.
Also, the hash itself is created in a native byte order.
With this change, pwd_mkdb(8) can be used to cross-build
*pwd.db files for another architecture.
Tested on: i386, amd64, alpha, sparc64
with moderate IO going on, system usage can hover around 65-77% even
though it would benefit from higher performance. Typically, only truly
idle systems pass the 90% mark so only demote then.
Also, add conditional code to allow different invokations for objcopy
depending on whether we're compiled on an i386 arch or amd64 arch, so
that we can produce x86-64 object files on amd64.
Ville-Pertti Keinonen (will at exomi dot comohmygodnospampleasekthx)
deserves a big thanks for submitting initial patches to make it
work. I have mangled his contributions appropriately.
The main gotcha with Windows/x86-64 is that Microsoft uses a different
calling convention than everyone else. The standard ABI requires using
6 registers for argument passing, with other arguments on the stack.
Microsoft uses only 4 registers, and requires the caller to leave room
on the stack for the register arguments incase the callee needs to
spill them. Unlike x86, where Microsoft uses a mix of _cdecl, _stdcall
and _fastcall, all routines on Windows/x86-64 uses the same convention.
This unfortunately means that all the functions we export to the
driver require an intermediate translation wrapper. Similarly, we have
to wrap all calls back into the driver binary itself.
The original patches provided macros to wrap every single routine at
compile time, providing a secondary jump table with a customized
wrapper for each exported routine. I decided to use a different approach:
the call wrapper for each function is created from a template at
runtime, and the routine to jump to is patched into the wrapper as
it is created. The subr_pe module has been modified to patch in the
wrapped function instead of the original. (On x86, the wrapping
routine is a no-op.)
There are some minor API differences that had to be accounted for:
- KeAcquireSpinLock() is a real function on amd64, not a macro wrapper
around KfAcquireSpinLock()
- NdisFreeBuffer() is actually IoFreeMdl(). I had to change the whole
NDIS_BUFFER API a bit to accomodate this.
Bugs fixed along the way:
- IoAllocateMdl() always returned NULL
- kern_windrv.c:windrv_unload() wasn't releasing private driver object
extensions correctly (found thanks to memguard)
This has only been tested with the driver for the Broadcom 802.11g
chipset, which was the only Windows/x86-64 driver I could find.
properly initialized, that happens when lpc is called from a tty.
Without this change, it's possible to get SIGSEGV simply doing:
echo "..:" | lpc
Reported by: Wojciech A. Koszek <dunstan at freebsd czest pl>
PR: 77462 (patch rewritten by myself)
MFC After: 1 week
entry having stepping value of zero can cause crontab to hang there,
and if the main crontab is being changed in this way, then cron(8)
will keep spining.
Obtained from: OpenBSD [src/usr.sbin/cron/entry.c,v 1.17]
PR: 68683 (my own, but forgot to commit it...)
MFC After: 1 week
o Use SYSCTL_IN() macro instead of direct call of copyin(9).
Submitted by: ume
o Move sysctl_drop() implementation to sys/netinet/tcp_subr.c where
most of tcp sysctls live.
o There are net.inet[6].tcp[6].getcred sysctls already, no needs in
a separate struct tcp_ident_mapping.
Suggested by: ume
nodes from (N + 1) to 1, where N is the number of
nodes in the system.
- Implement "ls -l" which runs the "show" command for
each node.
In collaboration with: glebius
behaviour of chflags within a jail. If set to 0 (the default), then a
jailed root user is treated as an unprivileged user; if set to 1, then
a jailed root user is treated the same as an unjailed root user.
This is necessary to allow "make installworld" to work inside a jail,
since it attempts to manipulate the system immutable flag on certain
files.
Discussed with: csjp, rwatson
MFC after: 2 weeks
Windows DRIVER_OBJECT and DEVICE_OBJECT mechanism so that we can
simulate driver stacking.
In Windows, each loaded driver image is attached to a DRIVER_OBJECT
structure. Windows uses the registry to match up a given vendor/device
ID combination with a corresponding DRIVER_OBJECT. When a driver image
is first loaded, its DriverEntry() routine is invoked, which sets up
the AddDevice() function pointer in the DRIVER_OBJECT and creates
a dispatch table (based on IRP major codes). When a Windows bus driver
detects a new device, it creates a Physical Device Object (PDO) for
it. This is a DEVICE_OBJECT structure, with semantics analagous to
that of a device_t in FreeBSD. The Windows PNP manager will invoke
the driver's AddDevice() function and pass it pointers to the DRIVER_OBJECT
and the PDO.
The AddDevice() function then creates a new DRIVER_OBJECT structure of
its own. This is known as the Functional Device Object (FDO) and
corresponds roughly to a private softc instance. The driver uses
IoAttachDeviceToDeviceStack() to add this device object to the
driver stack for this PDO. Subsequent drivers (called filter drivers
in Windows-speak) can be loaded which add themselves to the stack.
When someone issues an IRP to a device, it travel along the stack
passing through several possible filter drivers until it reaches
the functional driver (which actually knows how to talk to the hardware)
at which point it will be completed. This is how Windows achieves
driver layering.
Project Evil now simulates most of this. if_ndis now has a modevent
handler which will use MOD_LOAD and MOD_UNLOAD events to drive the
creation and destruction of DRIVER_OBJECTs. (The load event also
does the relocation/dynalinking of the image.) We don't have a registry,
so the DRIVER_OBJECTS are stored in a linked list for now. Eventually,
the list entry will contain the vendor/device ID list extracted from
the .INF file. When ndis_probe() is called and detectes a supported
device, it will create a PDO for the device instance and attach it
to the DRIVER_OBJECT just as in Windows. ndis_attach() will then call
our NdisAddDevice() handler to create the FDO. The NDIS miniport block
is now a device extension hung off the FDO, just as it is in Windows.
The miniport characteristics table is now an extension hung off the
DRIVER_OBJECT as well (the characteristics are the same for all devices
handled by a given driver, so they don't need to be per-instance.)
We also do an IoAttachDeviceToDeviceStack() to put the FDO on the
stack for the PDO. There are a couple of fake bus drivers created
for the PCI and pccard buses. Eventually, there will be one for USB,
which will actually accept USB IRP.s
Things should still work just as before, only now we do things in
the proper order and maintain the correct framework to support passing
IRPs between drivers.
Various changes:
- corrected the comments about IRQL handling in subr_hal.c to more
accurately reflect reality
- update ndiscvt to make the drv_data symbol in ndis_driver_data.h a
global so that if_ndis_pci.o and/or if_ndis_pccard.o can see it.
- Obtain the softc pointer from the miniport block by referencing
the PDO rather than a private pointer of our own (nmb_ifp is no
longer used)
- implement IoAttachDeviceToDeviceStack(), IoDetachDevice(),
IoGetAttachedDevice(), IoAllocateDriverObjectExtension(),
IoGetDriverObjectExtension(), IoCreateDevice(), IoDeleteDevice(),
IoAllocateIrp(), IoReuseIrp(), IoMakeAssociatedIrp(), IoFreeIrp(),
IoInitializeIrp()
- fix a few mistakes in the driver_object and device_object definitions
- add a new module, kern_windrv.c, to handle the driver registration
and relocation/dynalinkign duties (which don't really belong in
kern_ndis.c).
- made ndis_block and ndis_chars in the ndis_softc stucture pointers
and modified all references to it
- fixed NdisMRegisterMiniport() and NdisInitializeWrapper() so they
work correctly with the new driver_object mechanism
- changed ndis_attach() to call NdisAddDevice() instead of ndis_load_driver()
(which is now deprecated)
- used ExAllocatePoolWithTag()/ExFreePool() in lookaside list routines
instead of kludged up alloc/free routines
- added kern_windrv.c to sys/modules/ndis/Makefile and files.i386.
