Updates the manpage as well.
I've rewritten the patch as it was for 2.2.7. It can probably be put
into 3.1-STABLE as well.
PR: bin/10515
Submitted by: Jens Schweikhardt <schweikh@noc.dfn.de>
numbers as chars or use bogus casts in an attempt to unmisrepresnt
them. In top, don't assume that 0xff is the only negative cpu
number when cpu numbers are (mis)represented.
time now.
For whatever reason, the kernel seems to have generated SIGIOs
previously without an initial fcntl(...,F_SETOWN), but does no longer.
This caused window(1) to wait indefinitely for input.
Also, undo rev 1.3 of wwspawn.c, it was not well-thought, and
apparently not even tested at all. The blindly (even in a nonsensical
place like the comment on top of the function) applied replacement of
vfork() by fork() totally ignored that window(1) *does* abuse the
feature of vfork() where a modification of the parent's address space
is possible (in this case, to notify the parent of an erred exec*).
Also, with vfork(), it is guaranteed that the parent is only woken up
after the exec*() happened, where the replacement by fork() made the
parent to almost always become runnable again before the child, in
which case the parent simply told `subprocess died'. Unfortunately,
working around _this_ seems to be a lot more of redesign work compared
to little gained value, so i think relying on the specifics of vfork()
is the simpler way.
Submitted by: Philipp Mergenthaler <un1i@rz.uni-karlsruhe.de>
Instead, treat the inability to retrieve a record from the server as a
match failure and let things take its course.
Part of the problem here is that NIS _is_ turned on, however the master
server is actually not an NIS server: it's an NIS+ server. And the client
is bound to an NIS+ replica server that's running in YP compat mode.
The code which tries to figure out of the user is local or NIS gets
confused by this.
compiled in default in case it isn't defined. This is needed to make
cross compilation work in some edge cases. It also makes cross
compiling on FreeBSD other BSD's easier as well.
Obtained from: NetBSD, OpenBSD (predates the split)
to "Office Location:" to disambiguate what is expected. Add a note
to the man page to indicate that the office location and office phone
fields are concatenated and printed with the heading "Office:" by
finger(1). Swap the order of the home and office phone fields in the
man page to match the order of the fields in the editor.
If any programs interact with chpass(1) and expect "Location:" instead
of "Office Location:" as the prompt, either this change will have to be
reverted or the other programs will have to be changed.
PR: docs/7533
`ld ... <fudged ${LDFLAGS}>' to invoke the linker. This gets the
flags and standard library paths right without complications.
Unfortunately, it doesn't help for the X11 library paths -- cc
only appends /aout for standard library paths.
I'm not sure why we have `mvstat -z'. `sysctl vm.zone' gives more
information. OTOH, `sysctl vm.zone' shouldn't return ASCII data,
and reporting of memory use should be integrated, at least as an
option.
since it means -s (strip), and static linkage is forced correctly
anyway. Other things in ${LDFLAGS} are still bogusly passed to ld.
This only affects the aout case.
the display wrapped around.
This decreases the default maximum number of disks shown to 2, so things
don't wrap around so easily. Also, it fixes the header display issues.
Submitted by: Bruce Evans <bde@FreeBSD.ORG>
peripheral drivers can determine where in the devstat(9) list they are
inserted.
This requires recompilation of libdevstat, systat, vmstat, rpc.rstatd, and
any ports that depend on the devstat code, since the size of the devstat
structure has changed. The devstat version number has been incremented as
well to reflect the change.
This sorts devices in the devstat list in "more interesting" to "less
interesting" order. So, for instance, da devices are now more important
than floppy drives, and so will appear before floppy drives in the default
output from systat, iostat, vmstat, etc.
The order of devices is, for now, kept in a central table in devicestat.h.
If individual drivers were able to make a meaningful decision on what
priority they should be at attach time, we could consider splitting the
priority information out into the various drivers. For now, though, they
have no way of knowing that, so it's easier to put them in an easy to find
table.
Also, move the checkversion() call in vmstat(8) to a more logical place.
Thanks to Bruce and David O'Brien for suggestions, for reviewing this, and
for putting up with the long time it has taken me to commit it. Bruce did
object somewhat to the central priority table (he would rather the
priorities be distributed in each driver), so his objection is duly noted
here.
Reviewed by: bde, obrien
only likely to happen when you have a kernel<>userland mismatch,
but it's really annoying when top dumps core and leaves the terminal
in a mangled state; it's much nicer to print nicely formatted gibberish.
Look at the FTP_PASSIVE_MODE environment variable like the man page says.
PR: bin/9464
Submitted by: John A. Shue <John.Shue@symmetron.com>
Add references to RFC's 1790, 959, 850.
PR: doc/6564
the function naming problem for complex double function i've recently
aksed for in -committers. (The recently committed rev 1.5 of proc.c
was actually also part of this update.)
Should the mailing lists come to an agreement that f2c better belongs
into the ports, this could be done nevertheless. For the time being,
we've at least got a current version now.
Thanks, Steve!
Submitted by: Steve Kargl <sgk@troutmask.apl.washington.edu>
It selects which hash format to use by checking /etc/auth.conf for
auth_default. Leaving auth_default disabled will give the current
behaviour (use the same format as is currently used in the password,
or if a new password default to what crypt likes best--des if it exists).
Now you can set it to one of: des, best, md5 or sha1. best is a synonym
for sha1, currently.
This should be merged into RELENG_3 and a similar patch may be needed
for RELENG_2_2, should that deemed necessary.
Make world succeeded with these patches in my tree.
Submitted by: "Kaleb S. KEITHLEY" <kaleb@ics.com>
authentication only). This comes handy when you're tight on space.
Submitted by: mostly John Baldwin <jobaldwi@vt.edu>
Reviewed by: John D. Polstra <jdp@polstra.com>
This change should have no effect on i386.
Pointed out by: Steve Kargl <sgk@troutmask.apl.washington.edu>
Quote from http://www.netlib.org/f2c/readme:
NOTE: f2c.h defines several types, e.g., real, integer, doublereal.
The definitions in f2c.h are suitable for most machines, but if
your machine has sizeof(double) > 2*sizeof(long), you may need
to adjust f2c.h appropriately. f2c assumes
sizeof(doublecomplex) = 2*sizeof(doublereal)
sizeof(doublereal) = sizeof(complex)
sizeof(doublereal) = 2*sizeof(real)
sizeof(real) = sizeof(integer)
sizeof(real) = sizeof(logical)
sizeof(real) = 2*sizeof(shortint)
EQUIVALENCEs may not be translated correctly if these
assumptions are violated.
On machines, such as those using a DEC Alpha processor, on
which sizeof(short) == 2, sizeof(int) == sizeof(float) == 4,
and sizeof(long) == sizeof(double) == 8, it suffices to
modify f2c.h by removing the first occurrence of "long "
on each line containing "long ", e.g., by issuing the
commands
mv f2c.h f2c.h0
sed 's/long //' f2c.h0 >f2c.h
On such machines, one can enable INTEGER*8 by uncommenting
the typedef of longint in f2c.h, so it reads
typedef long longint;
by compiling libI77 with -DAllow_TYQUAD, and by adjusting
libF77/makefile as described in libF77/README.
Didn't fix related bogotification from moving the definitions of
DPADD and LDADD to here. Setting these variables in a top-level
directory gives bogus dependencies in library subdirectories.
E.g., there is a dependency on `foo.so..' where the double dots
separate null shared library version numbers.
Set BINDIR properly by inheriting it from ../Makefile.inc.
the kernel; this was left over from the earlier protocol-dependent
kernel multicast routing code.
Learn how to handle the malloc'd multicast routing table (instead of
expecting it to be in mbufs)
to be written to /etc.
The only essential change is in paths.h, so any third-party software
written correctly will pick it up in the next rebuild.
Reviewed by: the committers list (actually an old version)
I found the reason why f77 so offen dies on alpha. Here is a fix.
"Const" is a union of int and double.
If nelt->constblock.Const.ci > 0 then it trys to evaluate it as double
and floating point exception occurs.
Submitted by: Hidetoshi Shimokawa <simokawa@sat.t.u-tokyo.ac.jp>
Obtained from: NetBSD
one character shorter than the previous in a stairstep fashion when long
idle times were involved.
A couple of nits:
- spelling/typo fix.
- some of the easier style(9) fixes where it was bothering me.
- Handle 100+ days idle time (ha!). Probably the right thing to do is
to do a snprintf into a buffer and strlen the result rather than doing
hackery on magic numbers.
XXX the wide (and mostly unused) username and tty columns annoy me since
it it could be used for more useful information for the command. We should
actually count the largest username and tty and adjust like 'ls -l' does.
Submitted by: ishisone@sra.co.jp
Make touch handle years 2000-2038 in the obsoleted format, rather
than 1902-1969 as was previously the case with two digit year spec.
