Powermac G5 systems. MSI and several other things are not presently
supported.
The U3/U4 internal device support portions of this change were contributed
by Andreas Tobler.
MFC after: 1 week
This eliminates the only place where we can sleep when calling zio_interrupt().
As a side-effect this can actually improve performance a little as we
allocate one less thing for every I/O.
Prodded by: kib
MFC after: 1 week
avoid calling zio_interrupt() from geom_up thread context. It turns out that
when provider is forcibly removed from the system and we kill worker thread
there can still be some ZIOs pending. To complete pending ZIOs when there is
no worker thread anymore we still have to call zio_interrupt() from geom_up
context. To avoid this race just remove use of worker threads altogether.
This should be more or less fine, because I also thought that zio_interrupt()
does more work, but it only makes small UMA allocation with M_WAITOK.
It also saves one context switch per I/O request.
PR: kern/145339
Reported by: Alex Bakhtin <Alex.Bakhtin@gmail.com>
MFC after: 1 week
so ni_txrate returned 0 which is a invalid result.
- The fourth argument of ieee80211_ratectl_tx_complete() could be not
NULL.
Reported by: Gustau P?rez <gperez at entel.upc.edu>
Tested by: Gustau P?rez <gperez at entel.upc.edu>,
Ian FREISLICH <ianf at clue.co.za>
MFC after: 3 days
On a soekris Net5501, if you do a watchdog -t 16, followed by a watchdog
-t 0 to disable the watchdog, and then after some time (16s) re-enable
the watchdog the box reboots immediatly. This prevents also to stop and
restart watchdogd(8).
This is because when you stop the watchdog, the timer is not stoped,
only the hard reset is disabled. So when the timer has elapsed, the C2
event of the timer is set.
But when the hard reset is re-enabled, the event is not cleared and the
box reboots.
The attached patch stops and resets the counter when the watchdog is
disabled and do not disable the hard reset of the timer (if the timer
has elapsed it's too late).
Submitted by: Patrick Lamaizière
- add a moderation value to the Link vector
- allow disabling HW RSC on the 82599 if LRO
is not enabled.
- correct error in the stats code
- change optic type on the 82598 DA device
Thanks to Andrew Boyer for the changes.
We cannot expect that modspace is the last entry in the linker
set and thus that modspace + possible extra space up to PAGE_SIZE
would be contiguous. For the moment do not support more than
*_MODMIN space and ignore the extra space (*).
(*) We know how to get it back but it'll need testing.
Discussed with: jeff, rwatson (briefly)
Reviewed by: jeff
Sponsored by: The FreeBSD Foundation
Sponsored by: CK Software GmbH
MFC after: 4 days
implementation.
- Revert the Sun Fire V890 WAR of r205254. Instead let schizo_pci_bus()
only panic in case of fatal errors as the interrupt triggered by the
error the firmware of these and also Sun Fire 280R with version 7
Schizo caused may happen as late as using the HBA and not only prior
to touching the PCI bus (in the former case the actual error still is
fatal but we clear it before touching the PCI bus).
While at it count and export non-fatal error interrupts via sysctl(9).
- Remove unnecessary locking from schizo_ue().
RFA. Also drop frames that have either CRC error or alignment
error. Normally bad frames are not received at all. But controllers
running in promiscuous mode will receive bad frames. 82557 will
also receive bad frames to receive VLAN oversized frames.
While I'm here mark RNR condition if driver happen to see RNR in
RFA status and restart RU to receive frames again. Because driver
checks all received frames in RX loop, RNR condition could be set
in the middle of RX processing. Just relying on RNR interrupt was
not enough.
This change fixes "Memory modified after free" issue when fxp(4)
is running as a member of if_bridge(4).
Tested by: Larry Baird <lab <> gta dot com>
MFC after: 5 days
It includes the following changes:
- parallel reads in traversal code (Bug ID 6333409)
- faster traversal for zfs send (Bug ID 6418042)
- traversal code cleanup (Bug ID 6725675)
- fix for two scrub related bugs (Bug ID 6729696, 6730101)
- fix assertion in dbuf_verify (Bug ID 6752226)
- fix panic during zfs send with i/o errors (Bug ID 6577985)
- replace P2CROSS with P2BOUNDARY (Bug ID 6725680)
List of OpenSolaris Bug IDs:
6333409, 6418042, 6757112, 6725668, 6725675, 6725680,
6725698, 6729696, 6730101, 6752226, 6577985, 6755042
Approved by: pjd, delphij (mentor)
Obtained from: OpenSolaris (multiple Bug IDs)
MFC after: 1 week
from 2000 bytes to 20 Kbytes, which now matches the buffer size used for
NGM_BINARY2ASCII conversions.
The aim of this change is to allow for bigger binary structures to be
managed via netgraph ASCII messages, until we come up with an API
improvement which would get rid of such arbitrary hardcoded limits.
MFC after: 3 days
bottom of the manpages and order them consistently.
GNU groff doesn't care about the ordering, and doesn't even mention
CAVEATS and SECURITY CONSIDERATIONS as common sections and where to put
them.
Found by: mdocml lint run
Reviewed by: ru
microframe slot was not in the smask. The problem was that the EHCI driver was
then thinking that the transfer was immediately complete in some cases. Which
could lead to freeze-like situations, which can be recovered by unplugging the
USB device.
Reported by: Richard Kolkovich
Submitted by: Hans Petter Selasky
USB enumeration lock is locked, then the USB stack fails to resume the device
because locking the USB enumeration lock is part of the resume procedure. To
solve this issue a new lock is introduced which only protects the suspend and
resume callbacks, which can be dropped inside the usbd_do_request_flags()
function, to allow suspend and resume during so-called enumeration operations.
Submitted by: Hans Petter Selasky
- Make sure that when you kick the streams you add correctly
using a 16 bit unsigned.
- Make sure when sending out you allow FWD-TSN to skip over
and list the ACKED chunks in the stream/seq list (so the
rcv will kick the stream)
MFC after: 3 days
- Slide the map at the proper place.
- Mark the bits in the nr_array ONLY if there
is no marking.
- When generating a FWD-TSN we allow us to skip past
ACKED chunks too.
MFC after: 1 weeks
labeled iretq instruction.
Suppose that multithreaded process executes two threads, currently
scheduled on different processors. Let assume that thread A executes
using %cs or %ss pointing into the descriptor from LDT. If IPI comes
which handler does not return by jump to doreti, and meantime thread B
invalidates descriptor pointed to by %cs or %ss, then iretq from IPI
handler could fault.
Routing the return by doreti_iret allows kernel to catch the situation
and recover from it by sending signal to the usermode.
Tested by: pho
MFC after: 1 week
frame upon segment register load fault. The doreti procedure does not
load segment registers when returning to the kernel frame, and current
values in the segment descriptor cache already allow the kernel mode
to run, not modified by faulted loaded.
Suggested by: bde
Tested by: pho
MFC after: 1 week
ZFS still like to open all vdevs, close them and open them again,
which in turn provokes taste traffic anyway.
I don't know of any clean way to fix it, so do it the hard way - if we can't
open provider for writing just retry 5 times with 0.5 pauses. This should
elimitate accidental races caused by other classes tasting providers created on
top of our vdevs.
MFC after: 3 days
Reported by: James R. Van Artsdalen <james-freebsd-fs2@jrv.org>
Reported by: Yuri Pankov <yuri.pankov@gmail.com>
(TOCONS | TOLOG) mask even when called from DDB points.
That breaks several output, where the most notable is textdump output.
Fix this by having configurable callbacks passed to witness_list_locks()
and witness_display_spinlock() for printing out datas.
Reported by: several broken textdump outputs
Tested by: Giovanni Trematerra
<giovanni dot trematerra at gmail dot com>
MFC after: 7 days
X-MFC: r207922
user sets up a socket to a server sends data and closes
the socket before the server has called accept(). It used
to NOT work at all. Now we add a flag to the assoc and
defer assoc cleanup so that the accept will suceed.
deadlock fixed in r207671.
- Wait for worker process to exit at class unload. The worker process
was not guaranteed to exit before the linker unloaded the module.
- Use 0 as the worker process exit status instead of ENXIO and style
the NOTREACHED comment.
Reviewed by: lulf
X-MFC after: r207671
hardware tag insertion/stripping. Remove conditional code that
disables these hardware features on SiS190. Also nuke RX fixup code
which is no more required on strict-alignment architectures because
SiS190 supports RX 10 bytes padding.
Now all hardware features except jumbo frame and WOL are supported.
Thanks to Masa Murayama who confirmed SiS190 also has the same
hardware features of SiS191.
I guess the only difference between SiS191 and SiS190 would be
jumbo frame support. It will be implemented in near future.
fragmentation of mbuf chain to 32 from 16 because TSO can send 64KB
sized packet which in turn requires long list of mbuf chain. Due to
lack of documentation, I'm not sure whether driver have to pull up
ethernet/IP/TCP header with options to make controller work but
driver have to parse TCP header to update pseudo TCP checksum
anyway. The controller expects pseudo TCP checksum computed by
upper stack and the checksum should follow the MS NDIS
specification to make TSO work.
Tested by: xclin <xclin <> cs dot nctu dot edu dot tw >
flag, and for each thread, TDB_SUSPEND debug flag, same as it is done by
exit1() for orphaned debugee.
Approved by: des (procfs maintainer)
MFC after: 1 week
fxp(4) already used to extract most hardware MAC statistics but it
didn't show them. With this change, all MAC statistics counters
are exported. Because there are a couple of new counters for 82558
and 82559, enable extended MAC statistics functionality to get
these counters. Accoring to public data sheet, 82559 MAC statistics
return 24 DWORD counters(3 counters are unknown at this moment) so
increase MAC counter structure to meet the MAC statistics block size.
The completion of MAC counter dump is now checked against
FXP_STATS_DR_COMPLETE status code which is appended at the end of
status block. Previously fxp(4) ignored the status of the
FXP_SCB_COMMAND_CU_DUMPRESET command. fxp(4) does not wait for the
completion of pending command before issuing
FXP_SCB_COMMAND_CU_DUMPRESET. Instead it skips the command and try
it next time. This scheme may show better performance but there is
chance to loose updated counters after stopping controller. So make
sure to update MAC statistics in fxp_stop().
While I'm here move sysctl node creation to fxp_sysctl_node().
Tested by: Larry Baird < lab <> gta dot com >
(This eliminates a surprising number of page queues lock acquisitions by
vm_fault() because the page's queue is PQ_NONE and thus the page queues
lock is not needed to remove the page from a queue.)
swp_pager_force_pagein(). By dirtying the page, swp_pager_force_pagein()
forces vm_page_dontneed() to insert the page at the head of the inactive
queue, just like vm_page_deactivate() does. Moreover, because the page
was invalid, it can't have been mapped, and thus the other effect of
vm_page_dontneed(), clearing the page's reference bits has no effect. In
summary, there is no reason to call vm_page_dontneed() since its effect
will be identical to calling the simpler vm_page_deactivate().
vm_page_try_to_free(). Consequently, push down the page queues lock into
pmap_enter_quick(), pmap_page_wired_mapped(), pmap_remove_all(), and
pmap_remove_write().
Push down the page queues lock into Xen's pmap_page_is_mapped(). (I
overlooked the Xen pmap in r207702.)
Switch to a per-processor counter for the total number of pages cached.
table. The default size of the configuration table was 22 bytes. To
use extended feature of 82550/82551 the configuration table size
was expanded to 32 bytes. The added configuration for 82550/82551
specifies VLAN hardware tagging and IPSec configuration as well as
TCO.
To make configuration easier fxp(4) used a configuration template
and the template was copied to configuration table. After that,
some parameters of the configuration table was changed depending on
controller type and operation mode. However the size of template
was 22 bytes so some configuration parameters were not properly
initialized on 82550/82551.
Fix this by increasing the template size. For 82557, 82558 and
82559 the size of the configuration is still 22 bytes.
unicast and the other for multicast. To receive multicast frames
that host didn't join in promiscuous mode, driver have to set
promiscuous mode for multicast frames as well.
The Open Source Software Developer Manual for i8255x was not clear
how to handle promiscuous mode.
PR: kern/145905
MFC after: 5 days
snapshot code.
- Don't fsync() vnodes in prealloc if copy on write is in progress. It
is not safe to recurse back into the write path here.
Reported by: Vladimir Grebenschikov <vova@fbsd.ru>
successfully made it to the free list yet or not. This fixes
a deadlock that can occur with unlinked but referenced files.
Journal space and inodedeps were not correctly reclaimed because
the inode block was not left dirty.
Tested/Reported by: lwindschuh@googlemail.com
This joint work of Dag-Erling Smørgrav and myself updates the
FFS quota system to support both traditional 32-bit and new 64-bit
quotas (for those of you who want to put 2+Tb quotas on your users).
By default quotas are not compiled into the kernel. To include them
in your kernel configuration you need to specify:
options QUOTA # Enable FFS quotas
If you are already running with the current 32-bit quotas, they
should continue to work just as they have in the past. If you
wish to convert to using 64-bit quotas, use `quotacheck -c 64';
if you wish to revert from 64-bit quotas back to 32-bit quotas,
use `quotacheck -c 32'.
There is a new library of functions to simplify the use of the
quota system, do `man quotafile' for details. If your application
is currently using the quotactl(2), it is highly recommended that
you convert your application to use the quotafile interface.
Note that existing binaries will continue to work.
Special thanks to John Kozubik of rsync.net for getting me
interested in pursuing 64-bit quota support and for funding
part of my development time on this project.
in a no-sleep context. If resource allocation cannot be done without
sleep, make_dev_credf() fails and returns NULL.
Reviewed by: jh
MFC after: 2 weeks
from passive to active scans. Basicly disable it by increasing the
amount packets to be received to an amount which can't be reached
during dwell times.
Approved by: rpaulo (mentor)
MFC after: 3 days
pmap_page_is_mapped() in preparation for removing page queues locking
around calls to vm_page_free(). Setting aside the assertion that calls
pmap_page_is_mapped(), vm_page_free_toq() now acquires and holds the page
queues lock just long enough to actually add or remove the page from the
paging queues.
Update vm_page_unhold() to reflect the above change.
kern_sendfile() is running, the file's vm object can't be destroyed
because kern_sendfile() increments the vm object's reference count. (Once
kern_sendfile() decrements the reference count and returns, the vm object
can, however, be destroyed. So, sf_buf_mext() must handle the case where
the vm object is destroyed.)
Reviewed by: kib
vm_pageout_fallback_object_lock(), to obtain the page lock
while having page queue lock locked, and still maintain the
page position in a queue.
Use the helper to lock the page in the pageout daemon and contig launder
iterators instead of skipping the page if its lock is contested.
Skipping locked pages easily causes pagedaemon or launder to not make a
progress with page cleaning.
Proposed and reviewed by: alc
- Enable zfs_ace_byteswap() on FreeBSD as it works just fine (tested between
amd64 and sparc64 in both directions by Michael Moll).
PR: 146272
Approved by: mm, pjd
Obtained from: OpenSolaris (onnv rev. 8283:1ca59f393041; Bug ID 6764193) [1]
MFC after: 3 days
proceed while g_unload_class() blocks the event thread. Fix this by not
running g_unload_class() as a GEOM event and dropping the topology lock
when withering needs to proceed.
PR: kern/139847
Silence on: freebsd-geom
managed pages that didn't already have that lock held. (Freeing an
unmanaged page, such as the various pmaps use, doesn't require the page
lock.)
This allows a change in vm_page_remove()'s locking requirements. It now
expects the page lock to be held instead of the page queues lock.
Consequently, the page queues lock is no longer required at all by callers
to vm_page_rename().
Discussed with: kib
L2/3/4 headers and can drop or steer packets as instructed. Filtering
based on src ip, dst ip, src port, dst port, 802.1q, udp/tcp, and mac
addr is possible. Add support in cxgbtool to program these filters.
Some simple examples:
Drop all tcp/80 traffic coming from the subnet specified.
# cxgbtool cxgb2 filter 0 sip 192.168.1.0/24 dport 80 type tcp action drop
Steer all incoming UDP traffic to qset 0.
# cxgbtool cxgb2 filter 1 type udp queue 0 action pass
Steer all tcp traffic from 192.168.1.1 to qset 1.
# cxgbtool cxgb2 filter 2 sip 192.168.1.1 type tcp queue 1 action pass
Drop fragments.
# cxgbtool cxgb2 filter 3 type frag action drop
List all filters.
# cxgbtool cxgb2 filter list
index SIP DIP sport dport VLAN PRI P/MAC type Q
0 192.168.1.0/24 0.0.0.0 * 80 0 0/1 */* tcp -
1 0.0.0.0/0 0.0.0.0 * * 0 0/1 */* udp 0
2 192.168.1.1/32 0.0.0.0 * * 0 0/1 */* tcp 1
3 0.0.0.0/0 0.0.0.0 * * 0 0/1 */* frag -
16367 0.0.0.0/0 0.0.0.0 * * 0 0/1 */* * *
MFC after: 2 weeks
is no more need to defragment mbufs. After transmitting the
multi-fragmented frame, the controller updates only the first
descriptor of multi-descriptor transmission so it's driver's
responsibility to clear OWN bits of remaining descriptor of
multi-descriptor transmission. It seems the controller behaves much
like jme(4) controllers in descriptor handling.
Tested by: xclin <xclin <> cs dot nctu dot edu dot tw >
received frames. Also check driver has valid ifp pointer before
calling msk_stop() in device_shutdown handler. While I'm here
remove unnecessary accesses to interrupt mask registers in
device_shutdown handler because driver puts the controller into
reset state.
With these changes, msk(4) now survive from heavy RX traffic(1byte
UDP frame) while reboot is in progress.
Reported by: Mark Atkinson < atkin901 <> gmail dot com >
by zero of the second argument 'from'.
- Prefer u_int32_t over unsigned int to make its intention more clearer.
- Move the function to a header file and make it a static inline function.
Pointed out by: Andrew Reilly (areilly at bigpond dot net dot au)[1]
MFC after: 3 days
information for thread to allow calcru1() (re)use.
Rename ruxagg()->ruxagg_locked(), ruxagg_tlock()->ruxagg() [1].
The ruxagg_locked() function no longer clears thread ticks nor
td_incruntime.
Requested by: attilio [1]
Discussed with: attilio, bde
Reviewed by: bde
Based on submission by: Alexander Krizhanovsky <ak natsys-lab com>
MFC after: 1 week
X-MFC-Note: td_rux shall be moved to the end of struct thread
on Cassini using the external PCS SERDES otherwise unaligned access
traps and other strange effects happen with some machines. Don't touch
the MIF which is unused in that case either. These changes require the
PHY type to use to be determined via the OFW device tree or from the
VPD in machines without the former.
- Disable the SERDES pins of Saturn when not used in order to save power
and ensure they are enabled otherwise.
- In cas_attach() use the correct register offset for CAS_PCS_CONF_EN.
- Add some bus space barriers missing in the PCS code path.
These changes make the Sun GigaSwift Ethernet 1.0 MMF cards as well as
the on-board interfaces found in Sun Fire B100s Blade Server work.
PR: 144867
objects instead of OBJT_DEFAULT objects because we never reclaim or pageout
the allocated pages. Moreover, they are mapped with pmap_qenter(), which
creates unmanaged mappings.
Reviewed by: kib
scope of the object lock in agp_i810.c. (In this specific case, the scope
of the object lock shouldn't matter, but I don't want to create a bad
example that might be copied to a case where it did matter.)
Reviewed by: kib
variable and can cause problems, without the cliplist handling it works
without problems
- improve the cliplist error handling
- fix VIDIOCGTUNER and VIDIOCSMICROCODE (still no hardware available to test)
Submitted by: J.R. Oldroyd <jr@opal.com>
X-MFC after: soon (together with all the v4l stuff)
queue length. The default value for this parameter is 50, which is
quite low for many of today's uses and the only way to modify this
parameter right now is to edit if_var.h file. Also add read-only
sysctl with the same name, so that it's possible to retrieve the
current value.
MFC after: 1 month
HAL/Fujitsu) CPUs. For the most part this consists of fleshing out the
MMU and cache handling, it doesn't add pmap optimizations possible with
these CPU, yet, though.
With these changes FreeBSD runs stable on Fujitsu Siemens PRIMEPOWER 250
and likely also other models based on SPARC64 V like 450, 650 and 850.
Thanks go to Michael Moll for providing access to a PRIMEPOWER 250.
driver for CAM ATA subsystem. This driver supports same hardware as
atamarvell, ataadaptec and atamvsata drivers from ata(4), but provides
many additional features, such as NCQ, PMP, etc.
to unconditionally set PG_REFERENCED on a page before sleeping. In many
cases, it's perfectly ok for the page to disappear, i.e., be reclaimed by
the page daemon, before the caller to vm_page_sleep() is reawakened.
Instead, we now explicitly set PG_REFERENCED in those cases where having
the page persist until the caller is awakened is clearly desirable. Note,
however, that setting PG_REFERENCED on the page is still only a hint,
and not a guarantee that the page should persist.
revision, r207450, to this file. Specifically, between dropping the page
queues lock in vm_contig_launder() and reacquiring it in
vm_contig_launder_page(), the page may be removed from the active or
inactive queue. It could be wired, freed, cached, etc. None of which
vm_contig_launder_page() is prepared for.
Reviewed by: kib, kmacy
