These calls are not the same in general: the former will dequeue the
page if it is enqueued, while the latter will just leave it alone. But,
all existing uses of the former apply to unmanaged pages, which are
never enqueued in the first place. No functional change intended.
Reviewed by: kib
MFC after: 1 week
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D20470
Previously it did this only on platforms without a direct map. This
also more closely matches Linux's semantics.
Since some DRM v5.0 code assumes the old behaviour, use a
LINUXKPI_VERSION guard to preserve that until the out-of-tree module
is updated.
Reviewed by: hselasky, kib (earlier versions), johalun
MFC after: 1 week
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D20502
This was enumerated with exhaustive search for sys/eventhandler.h includes,
cross-referenced against EVENTHANDLER_* usage with the comm(1) utility. Manual
checking was performed to avoid redundant includes in some drivers where a
common os_bsd.h (for example) included sys/eventhandler.h indirectly, but it is
possible some of these are redundant with driver-specific headers in ways I
didn't notice.
(These CUs did not show up as missing eventhandler.h in tinderbox.)
X-MFC-With: r347984
seq_file.h and linux_seq_file.c was imported form ports earlier but
linux_seq_file.c was never compiled in with the module. With this
commit base seq_file will replace ports seq_file and it required a
few modifications to not break functionality and build.
Reviewed by: hps
Approved by: imp (mentor), hps
MFC after: 1 week
DRM drivers expect tasklets to have a counter for enable/disable calls.
Also, add a few more tasklet locking functions.
This patch is part of D19565
Reviewed by: hps
Approved by: imp (mentor), hps
MFC after: 1 week
Assign self as group leader at creation to act as the only member of a
new process group.
This patch is part of D19565
Reviewed by: hps
Approved by: imp (mentor), hps
MFC after: 1 week
Check LINUXKPI_VERSION macro for backwards compatibility.
It's recommended to update any drivers that depend on the older KPI
so we can deprecate < 5.0 code as we update to newer Linux version.
This patch is part of D19565
Reviewed by: hps
Approved by: imp (mentor), hps
MFC after: 1 week
Check the new LINUXKPI_VERSION macro for backwards compatibility.
This patch is part of D19565
Reviewed by: hps
Approved by: imp (mentor), hps
MFC after: 1 week
Also, make ktime_get_raw call getnanouptime instead of getnanotime
to match (the correct) ktime_get_raw_ns.
This patch is part of D19565
Reviewed by: hps
Approved by: imp (mentor), hps
MFC after: 1 week
Add support for DIM based on Linux,
with some minor adaptions specific to FreeBSD.
Linux commit
f97c3dc3c0e8d23a5c4357d182afeef4c67f5c33
MFC after: 3 days
Sponsored by: Mellanox Technologies
As Linux comment for this function point:
Signal to the system that the PCI device is not in use by the system
anymore. This only involves disabling PCI bus-mastering, if active.
Build tested drm-current-kmod prior to commit.
MFC after: 1 week
Submitted by: slavash@
Sponsored by: Mellanox Technologies
Turning on pr_debug at compile time make it non-optional at runtime.
This often means that the amount of the debugging is unbearable.
Allow developer to turn on pr_debug output only when needed.
Build tested drm-current-kmod prior to commit.
MFC after: 1 week
Submitted by: kib@
Sponsored by: Mellanox Technologies
The S/G list must be mapped AS-IS without any optimisations.
This also implies that sg_dma_len() must be equal to sg->length.
Many Linux drivers assume this and this fixes some DRM issues.
Put the BUS DMA map pointer into the scatter-gather list to
allow multiple mappings on the same physical memory address.
The FreeBSD version has been bumped to force recompilation of
external kernel modules.
Sponsored by: Mellanox Technologies
Make function macro wrappers for locking and unlocking to ease readability.
No functional change.
Discussed with: kib@, tychon@ and zeising@
Sponsored by: Mellanox Technologies
The <sys/pctrie.h> APIs expect a 64-bit DMA key.
This is fine as long as the DMA is less than or equal to 64 bits, which
is currently the case.
Sponsored by: Mellanox Technologies
Fix some style while at it.
Submitted by: Johannes Lundberg <johalun0@gmail.com>
MFC after: 1 week
Sponsored by: Limelight Networks
Sponsored by: Mellanox Technologies
When porting code once written for Linux we find not only uints but also ushort and ulong.
Provide central typedefs as part of the linuxkpi for those as well.
Reviewed by: hselasky, emaste
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19405
- offsets can be negative, loff_t needs to be signed, it also simplifies
interop with the rest of the code base to use off_t than the actual linux
definition "long long"
- don't rely on the defining "file" to "linux_file" in interface definitions
as that causes heartache with includes
Reviewed by: hps@
MFC after: 1 week
Sponsored by: iX Systems
Differential Revision: https://reviews.freebsd.org/D19274
Some consumers may be loosely coupled with the lkpi.
This allows them to call linux_alloc_current without
having a static dependency.
Reviewed by: hps@
MFC after: 1 week
Sponsored by: iX Systems
Differential Revision: https://reviews.freebsd.org/D19257
So far, intr_{g,s}etaffinity(9) take a single int for identifying
a device interrupt. This approach doesn't work on all architectures
supported, as a single int isn't sufficient to globally specify a
device interrupt. In particular, with multiple interrupt controllers
in one system as found on e. g. arm and arm64 machines, an interrupt
number as returned by rman_get_start(9) may be only unique relative
to the bus and, thus, interrupt controller, a certain device hangs
off from.
In turn, this makes taskqgroup_attach{,_cpu}(9) and - internal to
the gtaskqueue implementation - taskqgroup_attach_deferred{,_cpu}()
not work across architectures. Yet in turn, iflib(4) as gtaskqueue
consumer so far doesn't fit architectures where interrupt numbers
aren't globally unique.
However, at least for intr_setaffinity(..., CPU_WHICH_IRQ, ...) as
employed by the gtaskqueue implementation to bind an interrupt to a
particular CPU, using bus_bind_intr(9) instead is equivalent from
a functional point of view, with bus_bind_intr(9) taking the device
and interrupt resource arguments required for uniquely specifying a
device interrupt.
Thus, change the gtaskqueue implementation to employ bus_bind_intr(9)
instead and intr_{g,s}etaffinity(9) to take the device and interrupt
resource arguments required respectively. This change also moves
struct grouptask from <sys/_task.h> to <sys/gtaskqueue.h> and wraps
struct gtask along with the gtask_fn_t typedef into #ifdef _KERNEL
as userland likes to include <sys/_task.h> or indirectly drags it
in - for better or worse also with _KERNEL defined -, which with
device_t and struct resource dependencies otherwise is no longer
as easily possible now.
The userland inclusion problem probably can be improved a bit by
introducing a _WANT_TASK (as well as a _WANT_MOUNT) akin to the
existing _WANT_PRISON etc., which is orthogonal to this change,
though, and likely needs an exp-run.
While at it:
- Change the gt_cpu member in the grouptask structure to be of type
int as used elswhere for specifying CPUs (an int16_t may be too
narrow sooner or later),
- move the gtaskqueue_enqueue_fn typedef from <sys/gtaskqueue.h> to
the gtaskqueue implementation as it's only used and needed there,
- change the GTASK_INIT macro to use "gtask" rather than "task" as
argument given that it actually operates on a struct gtask rather
than a struct task, and
- let subr_gtaskqueue.c consistently use __func__ to print functions
names.
Reported by: mmel
Reviewed by: mmel
Differential Revision: https://reviews.freebsd.org/D19139
atomic updates and reduces amount of data protected by zone lock.
During startup point these fields to EARLY_COUNTER. After startup
allocate them for all early zones.
Tested by: pho
- Remove macros that covertly create epoch_tracker on thread stack. Such
macros a quite unsafe, e.g. will produce a buggy code if same macro is
used in embedded scopes. Explicitly declare epoch_tracker always.
- Unmask interface list IFNET_RLOCK_NOSLEEP(), interface address list
IF_ADDR_RLOCK() and interface AF specific data IF_AFDATA_RLOCK() read
locking macros to what they actually are - the net_epoch.
Keeping them as is is very misleading. They all are named FOO_RLOCK(),
while they no longer have lock semantics. Now they allow recursion and
what's more important they now no longer guarantee protection against
their companion WLOCK macros.
Note: INP_HASH_RLOCK() has same problems, but not touched by this commit.
This is non functional mechanical change. The only functionally changed
functions are ni6_addrs() and ni6_store_addrs(), where we no longer enter
epoch recursively.
Discussed with: jtl, gallatin
The check was not introduced in r342628, but the subsequent unchecked access to
refs was added then, prompting a Coverity warning about "Null pointer
dereferences (FORWARD_NULL)." The warning is bogus due to M_WAITOK, but so is
the NULL check that hints it, so just remove it.
CID: 1398588
Reported by: Coverity
the destroying cdev.
Currently linux_destroy_dev() waits for the reference count on the
linux cdev to drain, and each open file hold the reference.
Practically it means that linux_destroy_dev() is blocked until all
userspace processes that have the cdev open, exit. FreeBSD devfs does
not have such problem, because device refcount only prevents freeing
of the cdev memory, and separate 'active methods' counter blocks
destroy_dev() until all threads leave the cdevsw methods. After that,
attempts to enter cdevsw methods are refused with an error.
Implement somewhat similar mechanism for LinuxKPI cdevs. Demote cdev
refcount to only mean a hold on the linux cdev memory. Add sirefs
count to track both number of threads inside the cdev methods, and for
single-bit indicator that cdev is being destroyed. In the later case,
the call is redirected to the dummy cdev.
Reviewed by: markj
Discussed with: hselasky
Tested by: zeising
MFC after: 1 week
Sponsored by: Mellanox Technologies
Differential revision: https://reviews.freebsd.org/D18606
Driver description should be set by core and not by the Ethernet driver.
Approved by: hselasky (mentor)
MFC after: 1 week
Sponsored by: Mellanox Technologies
Currently we always return false if for PCI offline query.
Try to read PCI config, if the return value if 0xffff probably the
PCI is offline.
Approved by: hselasky (mentor)
MFC after: 1 week
Sponsored by: Mellanox Technologies
Make sure we hold a reference on the character device for every opened file
to prevent the character device to be freed prematurely.
Submitted by: hselasky@
Approved by: hselasky (mentor)
MFC after: 1 week
Sponsored by: Mellanox Technologies
If there is a vnode attached to the linux file, use it to fill
kinfo_file. Otherwise, report a new KF_TYPE_DEV file type, without
supplying any type-specific information.
KF_TYPE_DEV is supposed to be used by most devfs-specific file types.
Sponsored by: Mellanox Technologies
MFC after: 1 week
According to markj@:
pageproc contains the page daemon and laundry threads, which are
responsible for managing the LRU page queues and writing back dirty
pages. vmproc's main task is to swap out kernel stacks when the system
is under memory pressure, and swap them back in when necessary. It's a
somewhat legacy component of the system and isn't required. You can
build a kernel without it by specifying "options NO_SWAPPING" (which is
a somewhat misleading name), in which vm_swapout_dummy.c is compiled
instead of vm_swapout.c.
Based on this, we want pageproc to emulate kswapd, not vmproc.
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D18061
These are used by kms-drm to determine various heuristics relate
memory conditions.
The number of free swap pages is just a variable, and it can be
much cheaper by either adding a new getter, or simply extern'ing
swap_total. However, this patch opts to use the more expensive,
existing interface - since this isn't an operation in a high per
path.
This allows us to remove some more gpl linuxkpi and do the follo
kms-drm:
git rm linuxkpi/gplv2/include/linux/swap.h
Reviewed by: mmacy, Johannes Lundberg <johalun0@gmail.com>
Approved by: emaste (mentor)
Differential Revision: https://reviews.freebsd.org/D18052
Currently the compiler picks up the definition in machine/cpufunc.h.
Add compiler memory barriers to read* and write*. The Linux x86
implementation of these functions uses inline asm with "memory" clobber.
The Linux x86 implementation of read_relaxed* and write_relaxed* uses the
same inline asm without "memory" clobber.
Implement ioread* and iowrite* in terms of read* and write* so they also
have memory barriers.
Qualify the addr parameter in write* as volatile.
Like Linux, define macros with the same name as the inline functions.
Only define 64-bit versions on 64-bit architectures because generally
32-bit architectures can't do atomic 64-bit loads and stores.
Regroup the functions a bit and add brief comments explaining what they do:
- __raw_read*, __raw_write*: atomic, no barriers, no byte swapping
- read_relaxed*, write_relaxed*: atomic, no barriers, little-endian
- read*, write*: atomic, with barriers, little-endian
Add a comment that says our implementation of ioread* and iowrite*
only handles MMIO and does not support port IO.
Reviewed by: hselasky
MFC after: 3 days
error in the function hypercall_memfree(), where the wrong arena was being
passed to kmem_free().
Introduce a per-page flag, VPO_KMEM_EXEC, to mark physical pages that are
mapped in kmem with execute permissions. Use this flag to determine which
arena the kmem virtual addresses are returned to.
Eliminate UMA_SLAB_KRWX. The introduction of VPO_KMEM_EXEC makes it
redundant.
Update the nearby comment for UMA_SLAB_KERNEL.
Reviewed by: kib, markj
Discussed with: jeff
Approved by: re (marius)
Differential Revision: https://reviews.freebsd.org/D16845
became unused in FreeBSD 12.x as a side-effect of the NUMA-related
changes.)
Reviewed by: kib, markj
Discussed with: jeff, re@
Differential Revision: https://reviews.freebsd.org/D16825
The timespecadd(3) family of macros were imported from NetBSD back in
r35029. However, they were initially guarded by #ifdef _KERNEL. In the
meantime, we have grown at least 28 syscalls that use timespecs in some
way, leading many programs both inside and outside of the base system to
redefine those macros. It's better just to make the definitions public.
Our kernel currently defines two-argument versions of timespecadd and
timespecsub. NetBSD, OpenBSD, and FreeDesktop.org's libbsd, however, define
three-argument versions. Solaris also defines a three-argument version, but
only in its kernel. This revision changes our definition to match the
common three-argument version.
Bump _FreeBSD_version due to the breaking KPI change.
Discussed with: cem, jilles, ian, bde
Differential Revision: https://reviews.freebsd.org/D14725
On arm64 (and possible other architectures) we are unable to use static
DPCPU data in kernel modules. This is because the compiler will generate
PC-relative accesses, however the runtime-linker expects to be able to
relocate these.
In preparation to fix this create two macros depending on if the data is
global or static.
Reviewed by: bz, emaste, markj
Sponsored by: ABT Systems Ltd
Differential Revision: https://reviews.freebsd.org/D16140
While at it rename hlist_add_after() into hlist_add_behind().
Submitted by: Johannes Lundberg <johalun0@gmail.com>
MFC after: 1 week
Sponsored by: Mellanox Technologies
Sponsored by: Limelight Networks
the LinuxKPI. Add a comment saying in which Linux version this change was made.
Submitted by: Johannes Lundberg <johalun0@gmail.com>
MFC after: 1 week
Sponsored by: Mellanox Technologies
Sponsored by: Limelight Networks
in the LinuxKPI. While at it document when to use the "virtual_address" or
the "address" field in the "vm_fault" structure.
Submitted by: Johannes Lundberg <johalun0@gmail.com>
MFC after: 1 week
Sponsored by: Mellanox Technologies
Sponsored by: Limelight Networks
sg_alloc_table_from_pages() function in the LinuxKPI.
This basically allow segments to have a limit, max_segment.
Submitted by: Johannes Lundberg <johalun0@gmail.com>
MFC after: 1 week
Sponsored by: Mellanox Technologies
Sponsored by: Limelight Networks
with upstream Linux by returning the pointer to the removed element.
Submitted by: Johannes Lundberg <johalun0@gmail.com>
MFC after: 1 week
Sponsored by: Mellanox Technologies
- Add macros to allow preinitialization of cap_rights_t.
- Convert most commonly used code paths to use preinitialized cap_rights_t.
A 3.6% speedup in fstat was measured with this change.
Reported by: mjg
Reviewed by: oshogbo
Approved by: sbruno
MFC after: 1 month