Commit Graph

52 Commits

Author SHA1 Message Date
Xin LI
8510f61acd sys/geom: consistently use _PATH_DEV instead of hardcoding "/dev/".
Reviewed by:	cem
MFC after:	2 weeks
Differential Revision:	https://reviews.freebsd.org/D25565
2020-07-09 02:52:39 +00:00
Warner Losh
ae1cce524e Reimplement aliases in geom
The alias needs to be part of the provider instead of the geom to work
properly. To bind the DEV geom, we need to look at the provider's names and
aliases and create the dev entries from there. If this lives in the GEOM, then
it won't propigate down the tree properly. Remove it from geom, add it provider.

Update geli, gmountver, gnop, gpart, and guzip to use it, which handles the bulk
of the uses in FreeBSD. I think this is all the providers that create a new name
based on their parent's name.
2020-05-13 19:17:28 +00:00
Pawel Biernacki
7029da5c36 Mark more nodes as CTLFLAG_MPSAFE or CTLFLAG_NEEDGIANT (17 of many)
r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marked).
Use it in preparation for a general review of all nodes.

This is non-functional change that adds annotations to SYSCTL_NODE and
SYSCTL_PROC nodes using one of the soon-to-be-required flags.

Mark all obvious cases as MPSAFE.  All entries that haven't been marked
as MPSAFE before are by default marked as NEEDGIANT

Approved by:	kib (mentor, blanket)
Commented by:	kib, gallatin, melifaro
Differential Revision:	https://reviews.freebsd.org/D23718
2020-02-26 14:26:36 +00:00
Warner Losh
8b522bdae6 Pass BIO_SPEEDUP through all the geom layers
While some geom layers pass unknown commands down, not all do. For the ones that
don't, pass BIO_SPEEDUP down to the providers that constittue the geom, as
applicable. No changes to vinum or virstor because I was unsure how to add this
support, and I'm also unsure how to test these. gvinum doesn't implement
BIO_FLUSH either, so it may just be poorly maintained. gvirstor is for testing
and not supportig BIO_SPEEDUP is fine.

Reviewed by: chs
Differential Revision: https://reviews.freebsd.org/D23183
2020-01-17 01:15:55 +00:00
Mariusz Zaborski
645532a448 gnop: change the "count until fail" option
Change the "count_until_fail" option of gnop, now it enables the failing
rating instead of setting them to 100%.

The original patch introduced the new flag, which sets the fail/rate to 100%
after N requests. In some cases, we don't want to have 100% of failure
probabilities. We want to start failing at some point.
For example, on the early stage, we may like to allow some read/writes requests
before having some requests delayed - when we try to mount the partition,
or when we are trying to import the pool.
Another case may be to check how scrub in ZFS will behave on different stages.

This allows us to cover more cases.
The previous behavior still may be configured.

Reviewed by:	kib
Differential Revision:	https://reviews.freebsd.org/D22632
2019-12-29 15:47:37 +00:00
Mariusz Zaborski
80e63e0a90 gnop: allow to change the name of created device
Thanks to this option we can create more then one gnop provider from
single provider. This may be useful for temporary labeling some data
on the disk.

Reviewed by:	markj, allanjude, bcr
Differential Revision:	https://reviews.freebsd.org/D22304
2019-12-29 15:40:02 +00:00
Chuck Silvers
30738a349d Make all the gnop parameters optional in the request from userland,
filling in the same defaults that the current userland module uses.
This allows an old geom_nop.so userland module to work with a new kernel.

Approved by:	imp (mentor)
Reviewed by:	cem
Sponsored by:	Netflix
Differential Revision:	https://reviews.freebsd.org/D21972
2019-10-16 21:49:44 +00:00
Chuck Silvers
090a3ea3c2 Add a "count_until_fail" option to gnop, which says to start failing
I/O requests after the given number have been allowed though.

Approved by:    imp (mentor)
Reviewed by:    rpokala kib 0mp mckusick
Sponsored by:   Netflix
Differential Revision:  https://reviews.freebsd.org/D21593
2019-09-13 23:03:56 +00:00
Conrad Meyer
ac03832ef3 GEOM: Reduce unnecessary log interleaving with sbufs
Similar to what was done for device_printfs in r347229.

Convert g_print_bio() to a thin shim around g_format_bio(), which acts on an
sbuf; documented in g_bio.9.

Reviewed by:	markj
Discussed with:	rlibby
Sponsored by:	Dell EMC Isilon
Differential Revision:	https://reviews.freebsd.org/D21165
2019-08-07 19:28:35 +00:00
Mariusz Zaborski
4d7486c30f gnop: style nits 2019-07-31 17:51:06 +00:00
Mariusz Zaborski
4f80c85519 gnop: Introduce requests delay.
This allows to simulated disk that is responding slowly to the IO requests.

Reviewed by:	markj, bcr, pjd (previous version)
Differential Revision:	https://reviews.freebsd.org/D21052
2019-07-31 17:47:12 +00:00
Kirk McKusick
10519e1398 When using the destroy option to shut down a nop GEOM module, I/O
operations already in its queue were not being properly drained.
The GEOM framework does the queue draining, but the module needs
to wait for the draining to happen. The waiting is done by adding
a g_nop_providergone() function to wait for the I/O operations to
finish up. This change is similar to change -r345758 made to the
memory-disk driver.

Submitted by: Chuck Silvers
Tested by:    Chuck Silvers
MFC after:    1 week
Sponsored by: Netflix
2019-05-25 00:07:49 +00:00
Conrad Meyer
83efd2885e gnop(8): Nopify configuration as a kernel dump device
As a dummy / no-op dump device, to facilitate dumpon(8) testing.

Reviewed by:	markj (earlier version)
Differential Revision:	https://reviews.freebsd.org/D19991
2019-04-22 03:25:49 +00:00
Eugene Grosbein
6d305ab0b2 Extend stripeoffset and stripesize of GEOMs from u_int to off_t
GEOM's stripeoffset overflows at 4 gigabyte margin (2^32)
because of its u_int type. This leads to incorrect data in the output
generated by "sysctl kern.geom.confxml" command, "graid list" etc.
when GEOM array has volumes larger than 4G, for example.

This change does not affect ABI but changes KBI. No MFC planned.

Differential Revision:	https://reviews.freebsd.org/D13426
2018-10-27 16:14:42 +00:00
Kyle Evans
74d6c131cb Annotate geom modules with MODULE_VERSION
GEOM ELI may double ask the password during boot. Once at loader time, and
once at init time.

This happens due a module loading bug. By default GEOM ELI caches the
password in the kernel, but without the MODULE_VERSION annotation, the
kernel loads over the kernel module, even if the GEOM ELI was compiled into
the kernel. In this case, the newly loaded module
purges/invalidates/overwrites the GEOM ELI's password cache, which causes
the double asking.

MFC Note: There's a pc98 component to the original submission that is
omitted here due to pc98 removal in head. This part will need to be revived
upon MFC.

Reviewed by:	imp
Submitted by:	op
Obtained from:	opBSD
MFC after:	1 week
Differential Revision:	https://reviews.freebsd.org/D14992
2018-04-10 19:18:16 +00:00
Alan Somers
6f7f85e0e1 gnop(8): add the ability to set a nop provider's physical path
While I'm here, expand the existing tests a bit.

MFC after:	3 weeks
Differential Revision:	https://reviews.freebsd.org/D13579
2018-01-18 05:57:10 +00:00
Pedro F. Giffuni
3728855a0f sys/geom: adoption of SPDX licensing ID tags.
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
2017-11-27 15:17:37 +00:00
Edward Tomasz Napierala
45d7de1d37 Make geom_nop(4) collect statistics on all types of BIOs, not just
reads and writes.

PR:		kern/198405
Submitted by:	Matthew D. Fuller <fullermd at over-yonder dot net>
MFC after:	1 month
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D3679
2015-10-10 09:03:31 +00:00
Edward Tomasz Napierala
bb27d7ed90 Add a way to specify stripesize and stripeoffset to gnop(8). This makes
it possible to "simulate" 4K media, to eg test alignment handling.

Reviewed by:	mav@
MFC after:	1 month
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D3664
2015-09-15 18:01:59 +00:00
Mateusz Guzik
aa25ccfa36 gnop: make sure that newly allocated memory for softc is zeroed
This prevents mtx_init from encountering non-zeros and panicking
the kernel as a result.

Reported by:	Keith White <kwhite site.uottawa.ca>
2013-10-23 01:34:18 +00:00
Alexander Motin
40ea77a036 Merge GEOM direct dispatch changes from the projects/camlock branch.
When safety requirements are met, it allows to avoid passing I/O requests
to GEOM g_up/g_down thread, executing them directly in the caller context.
That allows to avoid CPU bottlenecks in g_up/g_down threads, plus avoid
several context switches per I/O.

The defined now safety requirements are:
 - caller should not hold any locks and should be reenterable;
 - callee should not depend on GEOM dual-threaded concurency semantics;
 - on the way down, if request is unmapped while callee doesn't support it,
   the context should be sleepable;
 - kernel thread stack usage should be below 50%.

To keep compatibility with GEOM classes not meeting above requirements
new provider and consumer flags added:
 - G_CF_DIRECT_SEND -- consumer code meets caller requirements (request);
 - G_CF_DIRECT_RECEIVE -- consumer code meets callee requirements (done);
 - G_PF_DIRECT_SEND -- provider code meets caller requirements (done);
 - G_PF_DIRECT_RECEIVE -- provider code meets callee requirements (request).
Capable GEOM class can set them, allowing direct dispatch in cases where
it is safe.  If any of requirements are not met, request is queued to
g_up or g_down thread same as before.

Such GEOM classes were reviewed and updated to support direct dispatch:
CONCAT, DEV, DISK, GATE, MD, MIRROR, MULTIPATH, NOP, PART, RAID, STRIPE,
VFS, ZERO, ZFS::VDEV, ZFS::ZVOL, all classes based on g_slice KPI (LABEL,
MAP, FLASHMAP, etc).

To declare direct completion capability disk(9) KPI got new flag equivalent
to G_PF_DIRECT_SEND -- DISKFLAG_DIRECT_COMPLETION.  da(4) and ada(4) disk
drivers got it set now thanks to earlier CAM locking work.

This change more then twice increases peak block storage performance on
systems with manu CPUs, together with earlier CAM locking changes reaching
more then 1 million IOPS (512 byte raw reads from 16 SATA SSDs on 4 HBAs to
256 user-level threads).

Sponsored by:	iXsystems, Inc.
MFC after:	2 months
2013-10-22 08:22:19 +00:00
John-Mark Gurney
d7078f3ba0 move the error report to a lower log level... Now you can see when it
returns an error without getting every single io that went through it..

MFC after:	1 week
2013-04-13 19:02:58 +00:00
Alexander Motin
6c6e13b6e1 GEOM NOP does not touch the data, so pass G_PF_ACCEPT_UNMAPPED flag through. 2013-03-26 05:58:49 +00:00
Alexander Motin
a93c0ed463 Remove extra bio_data and bio_length copying to child request after calling
g_clone_bio(), that already copied them.
2013-03-26 05:42:12 +00:00
Jaakko Heinonen
02c62349c9 - Don't pass geom and provider names as format strings.
- Add __printflike() attributes.
- Remove an extra argument for the g_new_geomf() call in swapongeom_ev().

Reviewed by:	pjd
2012-11-20 12:32:18 +00:00
Edward Tomasz Napierala
7027e4dac4 Add trivial resize handling to gnop(8).
Reviewed by:	mav
Sponsored by:	FreeBSD Foundation
2012-07-07 22:22:13 +00:00
Ed Schouten
6472ac3d8a Mark all SYSCTL_NODEs static that have no corresponding SYSCTL_DECLs.
The SYSCTL_NODE macro defines a list that stores all child-elements of
that node. If there's no SYSCTL_DECL macro anywhere else, there's no
reason why it shouldn't be static.
2011-11-07 15:43:11 +00:00
Andrey V. Elsukov
5d807a0e1a Include sys/sbuf.h directly.
Reviewed by:	pjd
2011-07-11 05:22:31 +00:00
Andrey V. Elsukov
53ff3d1e9c Remove unneeded checks, g_new_xxx functions can not return NULL.
Reviewed by:	pjd
MFC after:	1 week
2011-03-31 06:30:59 +00:00
Andrey V. Elsukov
e76dc5129a Sector size can not be greater than MAXPHYS.
MFC after:	1 week
2011-01-12 12:26:10 +00:00
Andrey V. Elsukov
eaaef50811 Remove redundant check.
MFC after:	1 week
2011-01-11 13:22:20 +00:00
Andrey V. Elsukov
f2b3e9e870 Round GNOP provider's mediasize to its sectorsize. This prevents KASSERT
in g_io_request when geom classes doing tasting.

PR:		kern/147852
MFC after:	1 week
2011-01-11 11:42:22 +00:00
Pawel Jakub Dawidek
469e952070 Remove trailing spaces. 2006-09-30 08:16:49 +00:00
Pawel Jakub Dawidek
46ee0837c2 Fix format character.
Reported by:	andre
2006-09-08 13:46:18 +00:00
Pawel Jakub Dawidek
6a146a1989 - Split failure probability configuration into read failure probability and
write failure probability.
- Allow to specify an error number to return of failure.

MFC after:	3 days
2006-09-08 09:21:21 +00:00
Pawel Jakub Dawidek
38ea96ac99 Remove trailing spaces. 2006-02-01 12:06:01 +00:00
Pawel Jakub Dawidek
58d85f544f Log situation when EIO is returned. 2006-01-17 07:23:36 +00:00
Pawel Jakub Dawidek
54df0743c7 Remove bio leak when EIO error is emulated.
Found by:	Coverity Prevent(tm)
MFC after:	3 days
2006-01-17 07:22:44 +00:00
Pawel Jakub Dawidek
b91df0e29e MFp4: Typo fix (without it the XML GEOM tree wasn't consistent).
Reported by:	Eric Anderson <anderson@centtech.com>
2005-12-19 06:05:40 +00:00
Pawel Jakub Dawidek
64806a739b Fix build breakage by fixing typo.
Reported by:	glebius
2005-12-09 11:38:02 +00:00
Pawel Jakub Dawidek
df3d5a19fc Teach NOP GEOM class how to gather the following statistics:
- number of read I/O requests,
- number of write I/O requests,
- number of read bytes,
- number of written bytes.
Add 'reset' subcommand for resetting statistics.
2005-12-08 23:00:31 +00:00
Max Khon
b3f05a2e9e g_nop_create: destroy newly created provider in case of errors. 2004-09-16 15:28:48 +00:00
Pawel Jakub Dawidek
b25aec32ff NOP class doesn't operate on metadata, so the spoil event can be safely
ignored.
2004-08-18 16:58:42 +00:00
Poul-Henning Kamp
5721c9c76a Tag all geom classes in the tree with a version number. 2004-08-08 07:57:53 +00:00
Pawel Jakub Dawidek
969ff54d70 - Fix unloading by the same way it is done in my other classes:
set gp->softc to NULL and return ENXIO when it is NULL, so GEOM
  will not panic or hang, but unload one device on every 'unload'.
  This make 'unload' command usable, but it have to be executed
  <number of devices> + 1 times.
- Made use of 'pp' variable.
2004-08-02 00:37:40 +00:00
Pawel Jakub Dawidek
d5c96d389e - Add '-S' option, which allow to specify sector size for transparent
provider.
- Bump version number.

This allows for a quite interesting trick. One can setup a stripe with
stripe size of 512 bytes and create transparent provider on top of it
with sector size equal to <ndisks> * 512. The result will be something
like RAID3 without parity disk (every access will touch all disks).
2004-07-30 08:19:22 +00:00
Pawel Jakub Dawidek
1d723f1d51 Improve geom(8)'s 'list' command to show geoms and their providers and
consumers. Teach STRIPE, CONCAT and NOP classes about this improvement.
2004-07-26 17:14:47 +00:00
Pawel Jakub Dawidek
e370e911b2 MFp4: Add two options for gnop(8)'s 'create' command:
-o offset - specifies where to start on the original provider
	-s size - specifies size of the transparent provider
2004-07-19 07:52:56 +00:00
Pawel Jakub Dawidek
d462f0a1ac Fix format string. 2004-06-07 13:40:40 +00:00
Pawel Jakub Dawidek
0e11f0a93b Don't allow for duplicated entries creation. 2004-06-07 13:33:09 +00:00