Commit Graph

18 Commits

Author SHA1 Message Date
Randall Stewart
b3f1ea41fd - Macro-izes the packed declaration in all headers.
- Vimage prep - these are major restructures to move
  all global variables to be accessed via a macro or two.
  The variables all go into a single structure.
- Asconf address addition tweaks (add_or_del Interfaces)
- Fix rwnd calcualtion to be more conservative.
- Support SACK_IMMEDIATE flag to skip delayed sack
  by demand of peer.
- Comment updates in the sack mapping calculations
- Invarients panic added.
- Pre-support for UDP tunneling (we can do this on
  MAC but will need added support from UDP to
  get a "pipe" of UDP packets in.
- clear trace buffer sysctl added when local tracing on.

Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
Robert Watson
265de5bb62 Correct two problems relating to sorflush(), which is called to flush
read socket buffers in shutdown() and close():

- Call socantrcvmore() before sblock() to dislodge any threads that
  might be sleeping (potentially indefinitely) while holding sblock(),
  such as a thread blocked in recv().

- Flag the sblock() call as non-interruptible so that a signal
  delivered to the thread calling sorflush() doesn't cause sblock() to
  fail.  The sblock() is required to ensure that all other socket
  consumer threads have, in fact, left, and do not enter, the socket
  buffer until we're done flushin it.

To implement the latter, change the 'flags' argument to sblock() to
accept two flags, SBL_WAIT and SBL_NOINTR, rather than one M_WAITOK
flag.  When SBL_NOINTR is set, it forces a non-interruptible sx
acquisition, regardless of the setting of the disposition of SB_NOINTR
on the socket buffer; without this change it would be possible for
another thread to clear SB_NOINTR between when the socket buffer mutex
is released and sblock() is invoked.

Reviewed by:	bz, kmacy
Reported by:	Jos Backus <jos at catnook dot com>
2008-01-31 08:22:24 +00:00
Randall Stewart
ceaad40ae7 - Locking compatiability changes. This involves adding
additional flags to many function calls. The flags only
  get used in BSD when we compile with lock testing. These
  flags allow apple to escape the "giant" lock it holds on
  the socket and have more fine-grained locking in the NKE.
  It also allows us to test (with witness) the locking used
  by apple via a compile switch (manually applied).

Approved by:	re@freebsd.org(B Mah)
2007-09-08 11:35:11 +00:00
Randall Stewart
2afb3e849f - During shutdown pending, when the last sack came in and
the last message on the send stream was "null" but still
  there, a state we allow, we could get hung and not clean
  it up and wait for the shutdown guard timer to clear the
  association without a graceful close. Fix this so that
  that we properly clean up.
- Added support for Multiple ASCONF per new RFC. We only
  (so far) accept input of these and cannot yet generate
  a multi-asconf.
- Sysctl'd support for experimental Fast Handover feature. Always
  disabled unless sysctl or socket option changes to enable.
- Error case in add-ip where the peer supports AUTH and ADD-IP
  but does NOT require AUTH of ASCONF/ASCONF-ACK. We need to
  ABORT in this case.
- According to the Kyoto summit of socket api developers
  (Solaris, Linux, BSD). We need to have:
   o non-eeor mode messages be atomic - Fixed
   o Allow implicit setup of an assoc in 1-2-1 model if
     using the sctp_**() send calls - Fixed
   o Get rid of HAVE_XXX declarations - Done
   o add a sctp_pr_policy in hole in sndrcvinfo structure - Done
   o add a PR_SCTP_POLICY_VALID type flag - yet to-do in a future patch!
- Optimize sctp6 calls to reuse code in sctp_usrreq. Also optimize
  when we close sending out the data and disabling Nagle.
- Change key concatenation order to match the auth RFC
- When sending OOTB shutdown_complete always do csum.
- Don't send PKT-DROP to a PKT-DROP
- For abort chunks just always checksums same for
  shutdown-complete.
- inpcb_free front state had a bug where in queue
  data could wedge an assoc. We need to just abandon
  ones in front states (free_assoc).
- If a peer sends us a 64k abort, we would try to
  assemble a response packet which may be larger than
  64k. This then would be dropped by IP. Instead make
  a "minimum" size for us 64k-2k (we want at least
  2k for our initack). If we receive such an init
  discard it early without all the processing.
- When we peel off we must increment the tcb ref count
  to keep it from being freed from underneath us.
- handling fwd-tsn had bugs that caused memory overwrites
  when given faulty data, fixed so can't happen and we
  also stop at the first bad stream no.
- Fixed so comm-up generates the adaption indication.
- peeloff did not get the hmac params copied.
- fix it so we lock the addr list when doing src-addr selection
  (in future we need to use a multi-reader/one writer lock here)
- During lowlevel output, we could end up with a _l_addr set
  to null if the iterator is calling the output routine. This
  means we would possibly crash when we gather the MTU info.
  Fix so we only do the gather where we have a src address
  cached.
- we need to be sure to set abort flag on conn state when
  we receive an abort.
- peeloff could leak a socket. Moved code so the close will
  find the socket if the peeloff fails (uipc_syscalls.c)

Approved by:	re@freebsd.org(Ken Smith)
2007-08-27 05:19:48 +00:00
Randall Stewart
c4739e2f47 - Fix address add handling to clear cached routes and source addresses
when peer acks the add in case the routing table changes.
- Fix sctp_lower_sosend to send shutdown chunk for mbuf send
  case when sndlen = 0 and sinfoflag = SCTP_EOF
- Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data,
  So that it does not send the "null" data mbuf out and cause
  it to get freed twice.
- Fix so auto-asconf sysctl actually effect the socket's asconf state.
- Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets.
- Memset bug in sctp_output.c (arguments were reversed) submitted
  found and reported by Dave Jones (davej@codemonkey.org.uk).
- PD-API point needs to be invoked >= not just > to conform to socket api
  draft this fixes sctp_indata.c in the two places need to be >=.
- move M_NOTIFICATION to use M_PROTO5.
- PEER_ADDR_PARAMS did not fail properly if you specify an address
  that is not in the association with a valid assoc_id. This meant
  you got or set the stcb level values instead of the destination
  you thought you were going to get/set. Now validate if the
  stcb is non-null and the net is NULL that the sa_family is
  set and the address is unspecified otherwise return an error.
- The thread based iterator could crash if associations were freed
  at the exact time it was running. rework the worker thread to
  use the increment/decrement to prevent this and no longer use
  the markers that the timer based iterator uses.
- Fix the memleak in sctp_add_addr_to_vrf() for the case when it is
  detected that ifa is already pointing to a ifn.
- Fix it so that if someone is so insane that they drop the
  send window below the minimal add mark, they still can send.
- Changed all state for associations to use mask safe macro.
- During front states in association freeing in sctp_inpcbfree, we
  had a locking problem where locks were not in place where they
  should have been.
- Free association calls were not testing the return value in
  sctp_inpcb_free() properly... others should be cast  void returns
  where we don't care about the return value.
- If a reference count is held on an assoc, even from the "force free"
  we should not do the actual free.. but instead let the timer
  free it.
- When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED
  flag is set, we must NOT process the packet but handle it like
  ootb. This is because while freeing an assoc we release the
  locks to get all the higher order locks so we can purge all
  the hash tables. This leaves a hole if a packet comes in
  just at that point. Now sctp_common_input_processing() will
  call the ootb code in such a case.
- Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes
  it so we don't have a conflict (I think this is a covertity change).
  We made this change AFTER some conversation and looking to make sure
  that M_PROTO5 does not have a problem between SCTP and the 802.11
  stuff (which is the only other place its used).
- Fixed lock order reversal and missing atomic protection around
  locked_tcb during association lookup and the 1-2-1 model.
- Added debug to source address selection.
- V6 output must always do checksum even for loopback.
- Remove more locks around inp that are not needed for an atomically
  added/subtracted ref count.
- slight optimization in the way we zero the array in sctp_sack_check()
- It was possible to respond to a ABORT() with bad checksum with
  a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT
  send a PKT-DROP to any ABORT().
- Add an option for local logging (useful for macintosh or when
  you need better performing during debugging). Note no commands
  are here to get the log info, you must just use kgdb.
- The timer code needs to be aware of if it needs to call
  sctp_sack_check() to slide the maps and adjust the cum-ack.
  This is because it may be out of sync cum-ack wise.
- Added threshold managment logging.
- If the user picked just the right size, that just filled the send
  window minus one mtu, we would enter a forever loop not copying and
  at the same time not blocking. Change from < to <= solves this.
- Sysctl added to control the fragment interleave level which defaults
  to 1.
- My rwnd control was not being used to control the rwnd properly (we
  did not add and subtract to it :-() this is now fixed so we handle
  small messages (1 byte etc) better to bring our rwnd down more
  slowly.

Approved by:	re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
Randall Stewart
18e198d3a3 - added pre-checks to the bindx call.
- use proper tick gathering macro instead of ticks directly.
- Placed reasonable boundaries on sets that a user can do
  that are converted to ticks from ms.
- Fix CMT_PF to always check to be sure CMT is on.
- Fix ticks use of CMT_PF.
- put back code to allow asconfs to be queued while INITs are in flight
  and before the assoc is established.
- During window probes, an ack'd packet might be left with the window
  probe mark on it causing it to be retransmitted. Change so that
  the flight decrease macro clears the window_probe mark.
- Additional logging flight size/reading and ASOC LOG. This
  is only enabled if you manually insert things into opt_sctp.h
  since its a set of debug code only.
- Found an interesting SMP race in the way data was appended which
  could cause a reader to lose a part of a message, had to
  reorder when we marked the message was complete to after
  the data was appended.
- bug in ADD-IP for the subset bound socket case when the peer has only
  one address
- fix ASCONF implicit success/error handling case
- proper support of jails in Freebsd 6>
- copy out the timeval for the 64 bit sparc world on cookie-echo
  alignment error crashes without this).
Approved by:	re(Ken Smith)
2007-07-17 20:58:26 +00:00
Randall Stewart
0a374fd92a Remove extraneous extern (its gotten from sctp_sysctl.h) 2007-06-15 20:23:41 +00:00
Randall Stewart
80fefe0a08 - Fix so ifn's are properly deleted when the ref count goes to 0.
- Fix so VRF's will clean themselves up when no references are around.
- Allow sctp_ifa to be passed into inpcb_bind, addr_mgmt_ep_sa to bypass
  normal validation checks.
- turn auto-asconf off for subset bound sockets
- Moves all logging to use KTR. This gets rid of most
  of the logging #ifdef's with a few exceptions reducing
  the number of config options for SCTP.
2007-06-14 22:59:04 +00:00
Randall Stewart
d61a0ae066 - fixed autclose to not allow setting on 1-2-1 model.
- bounded cookie-life to 1 second minimum in socket option set.
- Delayed_ack_time becomes delayed_ack per new socket api document.
- Improve port number selection, we now use low/high bounds and
  no chance of a endless loop. Only one call to random per bind
  as well.
- fixes so set_peer_primary pre-screens addresses to be
  valid to this host.
- maxseg did not allow setting on an assoc basis. We needed
  to thus track and use an association value instead of a inp value.
- Fixed ep get of HB status to report back properly.
- use settings flag to tell if assoc level hb is on off not
  the timer.. since the timer may still run if unconf address
  are present.
- check for crazy ENABLE/DISABLE conditions.
- set and get of pmtud (fixed path mtu) not always taking into account ovh.
- Getting PMTU info on stcb only needs to return PMTUD_ENABLED if
  any net is doing PMTU discovery.
- Panic or warning fixed to not do so when a valid ip frag is
  taking place.
- sndrcvinfo appearing in both inp and stcb was full size, instead
  of the non-pad version. This saves about 92 bytes from each struct
  by carefully converting to use the smaller version.
- one-2-one model get(maxseg) would always get ep value, never the
  tcb's value.
- The delayed ack time could be under a tick, this fixes so
  it bounds it to at least 1 tick for platforms whos tick
  is more than a ms.
- Fragment interleave level set to wrong default value.
- Fragment interleave could not set level 0.
- Defered stream reset was broken due to a guard check and ntohl issue.
- Found two lock order reversals and fixed.
- Tighten up address checking, if the user gives an address the sa_len
  had better be set properly.
- Get asoc by assoc-id would return a locked tcb when it was asked
  not to if the tcb was in the restart hash.
- sysctl to dig down and get more association details

Reviewed by:	gnn
2007-05-28 11:17:24 +00:00
Randall Stewart
ad81507eed Two major items here:
- All printf that was surrounded by #ifdef SCTP_DEBUG moves to
  a macro that does all of this. This removes all printfs from
  the code and makes the code more portable and easier to
  read.
- Static Analysis (cisco) - found a few bugs, but mostly we
  add checks for NULL pointers and such to make the tool
  happy. We now pass the Cisco SA tools checks except for
  where it does not understand tailq/lists. We still need
  to look at the coverity tools output too (this is like
  the cisco SA tool) and see if it wants us to fix any other
  items. Hopefully this will be the last major churn in the
  code other than bug fixes.
2007-05-09 13:30:06 +00:00
Randall Stewart
b100636770 - Copyright change, cisco's silly tool wants it to say:
"Copyright (c) 2001-2007, by Cisco Systems,"
   instead of
       *Copyright (c) 2001-2007, Cisco Systems,"

-  Also fix a few straglers that were still in 2006.
2007-05-08 17:01:12 +00:00
Randall Stewart
d06c82f169 - Somehow the disable fragment option got lost. We could
set/clear it but would not do it. Now we will.
-  Moved to latest socket api for extended sndrcv info struct.
-  Moved to support all new levels of fragment interleave (0-2).
-  Codenomicon security test updates - length checks and such.
-  Bug in stream reset (2 actually).
-  setpeerprimary could unlock a null pointer, fixed.
-  Added a flag in the pcb so netstat can see if we are listening easier.

Obtained from:	(some of the Listen changes from Weongyo Jeong)
2007-05-02 12:50:13 +00:00
Randall Stewart
c105859eee - fix source address selection when picking an acceptable address
- name change of prefered -> preferred
- CMT fast recover code added.
- Comment fixes in CMT.
- We were not giving a reason of cant_start_asoc per socket api
  if we failed to get init/or/cookie to bring up an assoc. Change
  so we don't just give a generic "comm lost" but look at actual
  states of dying assoc.
- change "crc32" arguments to "crc32c" to silence strict/noisy
  compiler warnings when crc32() is also declared
- A few minor tweaks to get the portable stuff truely portable
  for sctp6_usrreq.c :-D
- one-2-one style vrf match problem.
- window recovery would leave chks marked for retran
  during window probes on the sent queue. This would then
  cause an out-of-order problem and assure that the flight
  size "problem" would occur.
- Solves a flight size logging issue that caused rwnd
  overruns, flight size off as well as false retransmissions.g
- Macroize the up and down of flight size.
- Fix a ECNE bug in its counting.
- The strict_sacks options was causing aborts when window probing
  was active, fix to make strict sacks a bit smarter about what
  the next unsent TSN is.
- Fixes a one-2-one wakeup bug found by Martin Kulas.
- If-defed out form, Andre's copy routines pending his
  commit of at least m_last().. need to adjust for 6.2 as
  well.. since m_last won't exist.
Reviewed by:	gnn
2007-04-14 09:44:09 +00:00
Randall Stewart
42551e993f - Sysctl's move to seperate file
- moved away from ifn/ifa access to sctp_ifa/sctp_ifn
  built and managed by the add-ip code.
- cleaned up add-ip code to use the iterator
- made iterator be a thread, which enables auto-asconf now.
- rewrote and cleaned up source address selection (also
  made it use new structures).
- Fixed a couple of memory leaks.
- DACK now settable as to how many packets to delay as
  well as time.
- connectx() to latest socket API, new associd arg.
- Fixed issue with revoking and loosing potential to
  send when we inflate the flight size. We now inflate
  the cwnd too and deflate it later when the revoked
  chunk is sent or acked.
- Got rid of some temp debug code
- src addr selection moved to a common file (sctp_output.c)
- Support for simple VRF's (we have support for multi-vfr
  via compile switch that is scrubbed from BSD but we won't
  need multi-vrf until we first get VRF :-D)
- Rest of mib work for address information now done
- Limit number of addresses in INIT/INIT-ACK to
  a #def (30).

Reviewed by:	gnn
2007-03-15 11:27:14 +00:00
Randall Stewart
f42a358a6f - Copyright updates (aka 2007)
- ZONE get now also take a type cast so it does the
  cast like mtod does.
- New macro SCTP_LIST_EMPTY, which in bsd is just
  LIST_EMPTY
- Removal of const in some of the static hmac functions
  (not needed)
- Store length changes to allow for new fields in auth
- Auth code updated to current draft (this should be the
  RFC version we think).
- use uint8_t instead of u_char in LOOPBACK address comparison
- Some u_int32_t converted to uint32_t (in crc code)
- A bug was found in the mib counts for ordered/unordered
  count, this was fixed (was referencing a freed mbuf).
- SCTP_ASOCLOG_OF_TSNS added (code will probably disappear
  after my testing completes. It allows us to keep a
  small log on each assoc of the last 40 TSN's in/out and
  stream assignment. It is NOT in options and so is only
  good for private builds.
- Some CMT changes in prep for Jana fixing his problem
  with reneging when CMT is enabled (Concurrent Multipath
  Transfer = CMT).
- Some missing mib stats added.
- Correction to number of open assoc's count in mib
- Correction to os_bsd.h to get right sha2 macros
- Add of special AUTH_04 flags so you can compile the code
  with the old format (in case the peer does not yet support
  the latest auth code).
- Nonce sum was incorrectly being set in when ecn_nonce was
  NOT on.
- LOR in listen with implicit bind found and fixed.
- Moved away from using mbuf's for socket options to using
  just data pointers. The mbufs were used to harmonize
  NetBSD code since both Net and Open used this method. We
  have decided to move away from that and more conform to
  FreeBSD style (which makes more sense).
- Very very nasty bug found in some of my "debug" code. The
  cookie_how collision case tracking had an endless loop in
  it if you got a second retransmission of a cookie collision
  case. This would lock up  a CPU .. ugly..
- auth function goes to using size_t instead of int which
  conforms to socketapi better
- Found the nasty bug that happens after 9 days of testing.. you
  get the data chunk, deliver it and due to the reference to a ch->
  that every now and then has been deleted (depending on the postion
  in the mbuf) you have an invalid ch->ch.flags.. and thus you don't
  advance the stream sequence number.. so you block the stream
  permanently. The fix is to make local variables of these guys
  and set them up before you have any chance of trimming the
  mbuf.
- style fix in sctp_util.h, not sure how this got bad maybe in
  the last patch? (aka it may not be in the real source).
- Found interesting bug when using the extended snd/rcv info where
  we would get an error on receiving with this. Thats because
  it was NOT padded to the same size as the snd_rcv info. We
  increase (add the pad) so the two structs are the same size
  in sctp_uio.h
- In sctp_usrreq.c one of the most common things we did for
  socket options was to cast the pointer and validate the size.
  This as been macro-ized to help make the code more readable.
- in sctputil.c two things, the socketapi class found a missing
  flag type (the next msg is a notification) and a missing
  scope recovery was also fixed.

Reviewed by:	gnn
2007-02-12 23:24:31 +00:00
Randall Stewart
93164cf98c - most all includes (#include <>) migrate to the sctp_os_bsd.h file
- Finally all splxx() are removed
 - Count error fixed in mapping array which might
   cause a wrong cumack generation.
 - Invariants around panic for case D + printf when no invariants.
 - one-to-one model race condition fixed by using
   a pre-formed connection and then completing the
   work so accept won't happen on a non-formed
   association.
 - Some additional paranoia checks in sctp_output.
 - Locks that were missing in the accept code.

Approved by:	gnn
2007-01-18 09:58:43 +00:00
Randall Stewart
a5d547add3 1) Fixes on a number of different collision case LOR's.
2) Fix all "magic numbers" to be constants.
3) A collision case that would generate two associations to
   the same peer due to a missing lock is fixed.
4) Added tracking of where timers are stopped.
Approved by:	gnn
2006-12-14 17:02:55 +00:00
Randall Stewart
f8829a4a40 Ok, here it is, we finally add SCTP to current. Note that this
work is not just mine, but it is also the works of Peter Lei
and Michael Tuexen. They both are my two key other developers
working on the project.. and they need ata-boy's too:
****
peterlei@cisco.com
tuexen@fh-muenster.de
****
I did do a make sysent which updated the
syscall's and sysproto.. I hope that is correct... without
it you don't build since we have new syscalls for SCTP :-0

So go out and look at the NOTES, add
option SCTP (make sure inet and inet6 are present too)
and play with SCTP.

I will see about comitting some test tools I have after I
figure out where I should place them. I also have a
lib (libsctp.a) that adds some of the missing socketapi
functions that I need to put into lib's.. I will talk
to George about this :-)

There may still be some 64 bit issues in here, none of
us have a 64 bit processor to test with yet.. Michael
may have a MAC but thats another beast too..

If you have a mac and want to use SCTP contact Michael
he maintains a web site with a loadable module with
this code :-)

Reviewed by:	gnn
Approved by:	gnn
2006-11-03 15:23:16 +00:00