This patch adds support for three new SCSI commands: UNMAP, WRITE SAME(10)
and WRITE SAME(16). WRITE SAME commands support both normal write mode
and UNMAP flag. To properly report UNMAP capabilities this patch also adds
support for reporting two new VPD pages: Block limits and Logical Block
Provisioning.
UNMAP support can be enabled per-LUN by adding "-o unmap=on" to `ctladm
create` command line or "option unmap on" to lun sections of /etc/ctl.conf.
At this moment UNMAP supported for ramdisks and device-backed block LUNs.
It was tested to work great with ZFS ZVOLs. For file-backed LUNs UNMAP
support is unfortunately missing due to absence of respective VFS KPI.
Reviewed by: ken
MFC after: 1 month
Sponsored by: iXsystems, Inc
execution to a emumation program via parsing of ELF header information.
With this kernel module and userland tool, poudriere is able to build
ports packages via the QEMU userland tools (or another emulator program)
in a different architecture chroot, e.g. TARGET=mips TARGET_ARCH=mips
I'm not connecting this to GENERIC for obvious reasons, but this should
allow the kernel module to be built by default and enable the building
of the userland tool (which automatically loads the kernel module).
Submitted by: sson@
Reviewed by: jhb@
o Unmute terminal when done with driver replacement.
o Move init fonts to early point.
o Minor cleanup.
MFC after: 6 days
X-MFC-with: r264244 r264242
Sponsored by: The FreeBSD Foundation
{MIO,SER}5xxxx chips instead of treating all of them as PUC_PORT_2S.
Among others, this fixes the hang seen when trying to probe the none-
existent second UART on an actually 1-port chip.
Obtained from: NetBSD (BAR layouts)
MFC after: 3 days
Sponsored by: Bally Wulff Games & Entertainment GmbH
tracked BAW actually is.
The net80211 code that completes a BAR will set tid->txa_start (the
BAW start) to whatever value was called when sending the BAR.
Now, in case there's bugs in my driver code that cause the BAW
to slip along, we should make sure that the new BAW we start
at is actually what we currently have it at, not what we've sent.
This totally breaks the specification and so this stays a printf().
If it happens then I need to know and fix it.
Whilst here, add some debugging updates:
* add TID logging to places where it's useful;
* use SEQNO().
match how it's used.
This is another bug that led to aggregate traffic hanging because
the BAW tracking stopped being accurate. In this instance, a filtered
frame that exceeded retries would return a non-error, which would
mean the caller would never remove it from the BAW. But it wouldn't
be added to the filtered list, so it would be lost forever. There'd
thus be a hole in the BAW that would never get transmitted and
this leads to a traffic hang.
Tested:
* Routerstation Pro, AR9220 AP
we did suspend it.
The whole suspend/resume TID queue thing is supposed to be a matched
reference count - a subsystem (eg addba negotiation, BAR transmission,
filtered frames, etc) is supposed to call pause() once and then resume()
once.
ath_tx_tid_filt_comp_complete() is called upon the completion of any
filtered frame, regardless of whether the driver had aleady seen
a filtered frame and called pause().
So only call resume() if tid->isfiltered = 1, which indicates that
we had called pause() once.
This fixes a seemingly whacked and different problem - traffic hangs.
What was actually going on:
* There'd be some marginal link with crappy behaviour, causing filtered
frames and BAR TXing to occur;
* A BAR TX would occur, setting the new BAW (block-ack window) to seqno n;
* .. and pause() would be called, blocking further transmission;
* A filtered frame completion would occur from the hardware, but with
tid->isfiltered = 0 which indiciates we haven't actually marked
the queue yet as filtered;
* ath_tx_tid_filt_comp_complete() would call resume(), continuing
transmission;
* Some frames would be queued to the hardware, since the TID is now no
longer paused;
* .. and if some make it out and ACked successfully, the new BAW
may be seqno n+1 or more;
* .. then the BAR TX completes and sets the new seqno back to n.
At this point the BAW tracking would be loopy because the BAW
start was modified but the BAW ring buffer wasn't updated in lock
step.
Tested:
* Routerstation Pro + AR9220 AP
that are being done by the OS.
For now this'll match up with the "wakeups"; although I'll dig deeper into
this to see if we can determine which sleep state the CPU managed to get
into. Most things I've seen these days only expose up to C2 or C3 via
ACPI even though the CPU goes all the way down to C6 or C7.
o Mute terminal while vt(4) driver change in progress.
o Reset VDF_TEXTMODE before init new driver.
o Assign default font, if new driver is not in TEXTMODE.
o Do not update screen while driver changing.
Resolved by: adrian
Reported by: tyler
MFC after: 7 days
Sponsored by: The FreeBSD Foundation
the first alias had to be _alias0 and processing stopped at the first non-
defined variable (preventing gaps). Allowing gaps gives the administrator
the ability to group aliases in an adhoc manner and also lifts the
requirement to renumber aliases simply to comment-out an existing one.
Aliases are processed in numerical ascending order.
Discussed on: -rc
MFC after: 1 week
instructions. Partially obtained from OpenBSD by Pedro Giffuni, while I
added the fcomip variants.
Apparently this should help with compiling certain variants of WebKit.
MFC after: 3 days
Right now, init(8) cannot distinguish between an ACPI power button press
or a Ctrl+Alt+Del sequence on the keyboard. This is because
shutdown_nice() sends SIGINT to init(8) unconditionally, but later
modifies the arguments to reboot(2) to force a certain behaviour.
Instead of doing this, patch up the code to just forward the appropriate
signal to userspace. SIGUSR1 and SIGUSR2 can already be used to halt the
system.
While there, move waittime to the function where it's used; kern_reboot().
- Don't include sys/caprights.h, leverage the fact that cap_rights_t
is also defined in sys/types.h.
- Include sys/types.h directly.
- For systems that do not have cap_rights_t, define it, so we can use
it in au_to_rights() prototype.
Discussed with: rwatson
ip_auth.c to ip_auth.h. ip_frag_soft_t moves from ip_frag.c to
ip_frag.h. mlfk_ipl.c creates sysctl MIBs that reference control blocks
that are dynamically created when IP Filter is loaded. This necessitated
creating them on-the-fly rather than statically at compile time.
Approved by: glebius (mentor)
kqueue(2) already supports EVFILT_PROC. Add an EVFILT_PROCDESC that
behaves the same, but operates on a procdesc(4) instead. Only implement
NOTE_EXIT for now. The nice thing about NOTE_EXIT is that it also
returns the exit status of the process, meaning that we can now obtain
this value, even if pdwait4(2) is still unimplemented.
Notes:
- Simply reuse EVFILT_NETDEV for EVFILT_PROCDESC. As both of these will
be used on totally different descriptor types, this should not clash.
- Let procdesc_kqops_event() reuse the same structure as filt_proc().
The only difference is that procdesc_kqops_event() should also be able
to deal with the case where the process was already terminated after
registration. Simply test this when hint == 0.
- Fix some style(9) issues in filt_proc() to keep it consistent with the
newly added procdesc_kqops_event().
- Save the exit status of the process in pd->pd_xstat, as we cannot pick
up the proctree_lock from within procdesc_kqops_event().
Discussed on: arch@
Reviewed by: kib@
The units program is likely little used. It is even less likely that a script
will want the units program to print out its version number by passing -v.
GNU units uses -V for version and -v for verbosity.
Increase compatibility between these two versions (written by the same author)
by switching our flag as well.
Take this opportunity to remove bogus information about the version number and
just call it 'FreeBSD units'.
Discussed with: cperciva, rwatson
The UEFI loader causes buildworld to fail when building with (in-tree)
GCC, due to a typedef redefinition. As it happens the in-tree GCC
cannot successfully build the UEFI loader anyhow, as it does not support
__attribute__((ms_abi)). Thus, just avoid trying to build it with GCC, rather than disconnecting it from the build until the underlying issue
is fixed.
Sponsored by: The FreeBSD Foundation
with the ATI Radeon 9700 in the PowerBook G4 1.67GHz.
Code shamelessly taken in spirit from the radeonkms driver, which I hope will
make this driver redundant in the future.
MFC after: 2 weeks
