Basl is the bhyve ASL compiler. At the moment, it's just a small wrapper
to call iasl, the Intel ASL compiler. As bhyve will gain support for
qemu's ACPI table loader in the future, it has to create ACPI tables on
it's own. Therefore, it makes sense to create a new file which keeps the
code for basl.
This first implementation of basl supports creating an ACPI table by
appending raw bytes to it. It's also capable of loading all tables into
guest memory.
Reviewed by: jhb, markj (older version)
Approved by: manu (mentor)
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D36984
The '/' and '§' keys are missing in the german keyboard layout.
Reviewed by: markj
Approved by: manu (mentor)
MFC after: 1 week
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D37386
Async event report is controlled by async event configuration feature
setting. When reporting a critical temperature warning, check the async
event configuration.
Approved by: manu (mentor)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D37355
Set Feature is a feature specified function. Currently only some
features have the set procedure. For features that are not handled by
the controller, we should return a FEATURE_NOT_CHANGEABLE error message.
Approved by: manu (mentor)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D32802
Currently bhyve's NVMe controller cannot save feature values cross
reboot. It should return a FEATURE_NOT_SAVEABLE error when the command
specifies a save flag.
Quote from NVMe specification, page 205:
https://nvmexpress.org/wp-content/uploads/NVM-Express-1_4-2019.06.10-Ratified.pdf
If the Feature Identifier specified in the Set Features command is not
saveable by the controller and the controller receives a Set Features
command with the Save bit set to one, then the command shall be aborted
with a status of Feature Identifier Not Saveable.
Reviewed by: chuck (older version)
Approved by: manu (mentor)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D32767
The Number of Firmware Slots should never be zero. So, a Firmware Slot 1
should always exist. For that reason, always print the Number of
Firmware Slots and the Firmware Slot 1 Read-Only value.
Reviewed by: imp
Approved by: manu (mentor)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D34700
A misaligned frame pointer is certainly not a valid frame pointer and
with strict alignment enabled (as on CHERI) can cause panics when it is
loaded from later in the code.
Reviewed By: jhb
Differential Revision: https://reviews.freebsd.org/D34646
We only need to call pci_xhci_xfer_complete() when handling a transfer
to the control endpoint, so move that code into the epid == 1 block and
eliminate a goto. Also remove an unneeded reinitialization of
setup_trb.
No functional change intended.
MFC after: 1 week
Reviewed by: corvink, jhb
Differential Revision: https://reviews.freebsd.org/D37287
Else out-of-bound reads and undefined behaviour may happen.
The current code only checked for the presence of the first of four bytes.
Make sure the fields in question have the minium size required.
No functional change intended.
Reviewed by: rrs@
MFC after: 1 week
Sponsored by: NVIDIA Networking
We reference count to ensure we don't release the socket while we still
have data in flight. That means that we can end up releasing the socket
from ovpn_encrypt_tx_cb().
We must have a vnet context set when calling sorele() (which asserts
this from within sofree()), so move the CURVNET_SET()/CURVNET_RESTORE()
to ensure this is the case.
While here also add a couple of assertions to make this more obvious,
and to ease future debugging.
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D37326
othermta (along with mta_start_script configuration entry in rc.conf)
was a mechanism used to be able to run another mta than sendmail(8) before
"rcng" time 20 years ago.
othermta has not been used since.
This appears to be a leftover from the time we used a less-capable VCS.
Reviewed by: delphij
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D37368
Without this patch, the code in the rpcbind client forces
the use of UDP. A comment notes that some rpcbind servers
only support UDP. This makes NFSv3 mounts to Azure servers
impossible, since they require use of TCP for rpcbind.
Since the comment is very old (imported from NetBSD in 2001)
and I do not believe any UDP only rpcbind servers will
still exist, this patch comments out the code that forces
use of UDP, so that NFSv3 mounts to Azure servers can work.
For an NFSv3 mount, the "udp" mount option will still
make mount_nfs use UDP for rpcbind so that can be used
as a workaround for any old NFSv3 server that only
supports rpcbind over UDP (if any such server still exists).
I asked if doing this change is appropriate on freebsd-fs@
and I only got one reply (off list) that supported doing
the change.
PR: 267301
MFC after: 1 month
All the needed infrastructure updates have been made to allow
snapshots to be taken on UFS/FFS filesystems that are using journaled
soft updates. The most immediate benefit is the ability to use a
snapshot to take a consistent filesystem dump on a live filesystem
using the -L option to dump(8).
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D36491
The reported bug is UFS: bad file descriptor: soft update journaling
can not be enabled on some FreeBSD-provided disk images – failed
to write updated cg.
The UFS library (libufs(3)) failed to reopen its disk descriptor
when first attempting to update a cylinder group. The error only
occurred when trying to add journaling to a filesystem whose first
cylinder group was too full to hold the journal.
PR: 259090
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
ktls_cleanup() does not free ktls session objects, it merely
cleans (and frees) members of the object.
Change callers to use ktls_free() instead.
Reviewed by: gallatin, markj
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D37352
${name}_prepend is suboptimal as it is prepended to the actual
command being run. Therefore the term "commandS to prepend"
is misleading and no clear separation takes place for setup tasks
that may be required like changing a config file permission or
generating a configuration file prior to service start.
The other reason is that {argument}_precmd is a service-side
variable and cannot be repurposed from the user-side.
Reviewed by: pauamma
Differential Revision: https://reviews.freebsd.org/D36210
TL;DR: Three ZFS tests created ZFS pools on all unmounted devices listed
in /etc/fstab, corrupting their contents. Stop that.
Imagine my surprise when the ESP on my main dev/test VM would "randomly"
become corrupted, making it unbootable. Three tests collect various devices
from the system and try to add them to a test pool. The test expects this
to fail because it _assumes_ these devices are in use and ZFS will correctly
reject the request.
My /etc/fstab has two entries for devices in /dev:
/dev/gpt/swap0 none swap sw,trimonce,late
/dev/gpt/esp0 /boot/efi msdosfs rw,noauto
Note the `noauto` on the ESP. In a remarkable example of irony, I chose
this because it should keep the ESP more protected from corruption;
in fact, mounting it would have protected it from this case.
The tests added all of these devices to a test pool in a _single command_,
expecting the command to fail. The swap device was in use, so the command
correctly failed, but the ESP was added and therefore corrupted. However,
since the command correctly failed, the test didn't notice the ESP problem.
If each device had been added with its own command, the test _might_ have
noticed that one of them incorrectly succeeded. However, two of these
tests would not have noticed:
hotspare_create_001_neg was incorrectly specified as needing the Solaris
dumpadm command, so it was skipped. _Some_ of the test needs that command,
but it checks for its presence and runs fine without it.
Due to bug 241070, zpool_add_005_pos was marked as an expected failure.
Due to the coarse level of integration with ATF, this test would still
"pass" even if it failed for the wrong reason. I wrote bug 267554 to
reconsider the use of atf_expect_fail in these tests.
Let's further consider the use of various devices found around the system.
In addition to devices in /etc/fstab, the tests also used mounted devices
listed by the `mount` command. If ZFS behaves correctly, it will refuse
to added mounted devices and swap devices to a pool. However, these are
unit tests used by developers to ensure that ZFS still works after they
modify it, so it's reasonable to expect ZFS to do the _wrong_ thing
sometimes. Using random host devices is unsafe.
Fix the root problem by using only the disks provided via the "disks"
variable in kyua.conf. Use one to create a UFS file system and mount it.
Use another as a swap device. Use a third as a dump device, but expect
it to fail due to bug 241070.
While I'm here:
Due to commit 6b6e2954dd, we can simply add a second dump device and
remove it in cleanup. We no longer need to save, replace, and restore the
pre-existing dump device.
The cleanup_devices function used `camcontrol inquiry` to distinguish disks
from other devices, such as partitions. That works fine for SCSI, but not
for ATA or VirtIO block. Use `geom disk list` instead.
PR: 241070
PR: 267554
Reviewed by: asomers
Sponsored by: Dell Inc.
Differential Revision: https://reviews.freebsd.org/D37257
On Linux, the `kmalloc()` family of functions returns a special value if
the size of the allocation is zero. This macro verifies if the pointer
is NULL (the allocation failed) or the size is 0 (the allocation was not
performed AFAIU). This special value can be passed to `kfree()`.
On FreeBSD, our `malloc(9)` functions don't return a special value for
0-size allocations. Therefore we can simply compare the result against
NULL.
Reviewed by: manu
Approved by: manu
Differential Revision: https://reviews.freebsd.org/D37367
They are not really used in this header. However they are included in
Linux and at least the DRM drivers unfortunately rely on this namespace
pollution.
Reviewed by: manu
Approved by: manu
Differential Revision: https://reviews.freebsd.org/D37365
This is used by `i915_gem.c` in the i915 DRM driver to get access to
`wbinvd_on_all_cpus()`.
Reviewed by: manu
Approved by: manu
Differential Revision: https://reviews.freebsd.org/D36970
The M1 has no EL3, so we're limited to a spin-table implementation if we
want to eventually use bhyve on it. Implement spin-table now, but note
that we still prefer PSCI where possible.
Reviewed by: mmel
Differential Revision: https://reviews.freebsd.org/D34661
Although intel's specification did not tell which unit for Temperature
Statistics (Log Identifier C5h), I believe it is based on Celsius
instead of Kelvin.
here is my P3700 SSDs result(before):
Intel Temperature Log
=====================
Current: 30 K, -243.15 C, -405.67 F
Overtemp Last Flags 0
Overtemp Lifetime Flags 0
Max Temperature 53 K, -220.15 C, -364.27 F
Min Temperature 17 K, -256.15 C, -429.07 F
Max Operating Temperature 63 K, -210.15 C, -346.27 F
Min Operating Temperature 0 K, -273.15 C, -459.67 F
Estimated Temperature Offset: 0 C/K
after apply the patch, result is
Intel Temperature Log
=====================
Current: 303.15 K, 30 C, 86.00 F
Overtemp Last Flags 0
Overtemp Lifetime Flags 0
Max Temperature 326.15 K, 53 C, 127.40 F
Min Temperature 290.15 K, 17 C, 62.60 F
Max Operating Temperature 336.15 K, 63 C, 145.40 F
Min Operating Temperature 273.15 K, 0 C, 32.00 F
Estimated Temperature Offset: 0 C/K
I also compare to smartctl's report. it match very well.
also tested on Intel P3600, it fixed the problem.
Signed-off-by: Wanpeng Qian <wanpengqian@gmail.com>
Reviewed by: imp (added tweak to samsung.c so it still compiles)
Differential Revision: https://reviews.freebsd.org/D32845
The original ARC paper called for an initial 50/50 MRU/MFU split
and this is accounted in various places where arc_p = arc_c >> 1,
with further adjustment based on ghost lists size/hit. However, in
current code both arc_adapt() and arc_get_data_impl() aggressively
grow arc_p until arc_c is reached, causing unneeded pressure on
MFU and greatly reducing its scan-resistance until ghost list
adjustments kick in.
This patch restores the original behavior of initially having arc_p
as 1/2 of total ARC, without preventing MRU to use up to 100% total
ARC when MFU is empty.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Gionatan Danti <g.danti@assyoma.it>
Closes#14137Closes#14120
This command already prints a tremendous amount of output, and properly
obeys the pager. It no longer makes sense to arbitrarily limit the pages
that are printed, as the reader will not be aware that this has
happened.
Reviewed by: markj
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D37361
This is not exhaustive, just what I collected while working on
mac_ddb(4).
Reviewed by: pauamma, markj, jhb
MFC after: 1 week
Sponsored by: The FreeBSD Foundation (in part)
Differential Revision: https://reviews.freebsd.org/D37333
- Describe optional 'addr' argument to many show commands
- Remove obsolete commands (show cbstat)
- 'show jails' was renamed to 'show prison'
- Remove superfluous commentary about sleepqueues
- Fix an xref to gdb(4)
- Fix issues reported by mandoc -Tlint
- Plus a couple other inaccuracies/inconsistencies
Reviewed by: pauamma, markj, jhb
MFC after: 1 week
Sponsored by: The FreeBSD Foundation (in part)
Differential Revision: https://reviews.freebsd.org/D37332
This means INET and DEBUGNET in addition to NETDUMP.
Reviewed by: pauamma, markj
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D37331
The man page claims that netgdb will be enabled automatically with the
presence of the DDB, GDB, and INET options. Based on the logic in
conf/files, this is not the case. Update the manpage to list all
of the options required to include netgdb.
Reviewed by: pauamma, markj
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D37330
