Commit Graph

25 Commits

Author SHA1 Message Date
Andrew Thompson
767cb2e29d Remove overuse of exclamation marks in kernel printfs, there mere fact a
message has been printed is enough to get someones attention. Also remove the
line number for DPRINTF/DPRINTFN, it already prints the funtion name and a
unique message.
2009-11-26 00:43:17 +00:00
Alfred Perlstein
bd73b18714 USB core:
- add support for defragging of written device data.
- improve handling of alternate settings in device side mode.
- correct return value from usbd_get_no_alts() function.
- reported by: HPS
- P4 ID: 166156, 166168

- report USB device release information to devd and pnpinfo.
- reported by: MIHIRA Sanpei Yoshiro
- P4 ID: 166221

Submitted by:	hps
Approved by:	re
2009-07-30 00:15:50 +00:00
Andrew Thompson
ed6d949afd - Make struct usb_xfer opaque so that drivers can not access the internals
- Reduce the number of headers needed for a usb driver, the common case is just   usb.h and usbdi.h
2009-06-23 02:19:59 +00:00
Andrew Thompson
a593f6b8de s/usb2_/usb_|usbd_/ on all function names for the USB stack. 2009-06-15 01:02:43 +00:00
Andrew Thompson
8437751d86 Remove usb2_cv_* and just use the kernel condvar implementation, it was needed
earlier since condition variables didnt work with Giant but this was fixed 10
months ago.
2009-06-15 00:33:18 +00:00
Andrew Thompson
ae60fdfba2 Rename usb pipes to endpoints as it better represents what they are, and struct
usb_pipe may be used for a different purpose later on.
2009-06-07 19:41:11 +00:00
Andrew Thompson
115df0b6d2 Reorgansise the logic for tranversing the pipe list.
Submitted by:	Hans Petter Selasky
2009-06-02 17:31:59 +00:00
Andrew Thompson
e0a69b51ac s/usb2_/usb_/ on all typedefs for the USB stack. 2009-05-29 18:46:57 +00:00
Andrew Thompson
760bc48e7e s/usb2_/usb_/ on all C structs for the USB stack. 2009-05-28 17:36:36 +00:00
Andrew Thompson
9360ae4073 Rename the usb sysctl tree from hw.usb2.* back to hw.usb.*.
Submitted by:	Hans Petter Selasky
2009-05-21 01:48:42 +00:00
Andrew Thompson
f29a072444 - rename usb2_mode to usb_mode [1]
- change variable types to use the enum

Submitted by:	Hans Petter Selasky [1]
2009-05-21 00:04:17 +00:00
Andrew Thompson
bd21677868 Track the usb device state as its powered on, addressed and configured. This helps
to avoid touching the device when it is not going to respond and would otherwise
timeout.

Implement the suspend tracking as a udev state too.
2009-04-25 21:10:06 +00:00
Andrew Thompson
459d369ee2 MFp4 //depot/projects/usb@160930
Change the roothub exec functions to take the usb request and data pointers
directly rather than placing them on the parent bus struct.

Submitted by:	Hans Petter Selasky
2009-04-22 17:08:16 +00:00
Andrew Thompson
fde875265f Provide a better commit log for r190735, forced by making a whitespace change.
Refactor how we interface with the root HUB. This is achieved by making a
direct call from usb2_do_request to the host controller for root hub requests,
this call will perform the controller specific register read/writes and return
the error code.

This cuts out a lot of code in the host controller files and saves one thread
per USB bus.

Submitted by:	Hans Petter Selasky
2009-04-06 00:22:49 +00:00
Andrew Thompson
03797f3300 MFp4 //depot/projects/usb@159948
Add more debugging output on enumeration failures.

Submitted by:	Hans Petter Selasky
2009-04-05 18:21:31 +00:00
Andrew Thompson
3930731567 MFp4 //depot/projects/usb@159922
Refactor how we interface with the root HUB. This cuts around 1200 lines of
code totally and saves one thread per USB bus.

Submitted by:	Hans Petter Selasky
2009-04-05 18:20:49 +00:00
Andrew Thompson
4eae601ebd MFp4 //depot/projects/usb@159909
- make usb2_power_mask_t 16-bit
- remove "usb2_config_sub" structure from "usb2_config". To compensate for this
  "usb2_config" has a new field called "usb_mode" which select for which mode
  the current xfer entry is active. Options are: a) Device mode only b) Host
  mode only (default-by-zero) c) Both modes.  This change was scripted using
  the following sed script: "s/\.mh\././g".
- the standard packet size table in "usb_transfer.c" is now a function, hence
  the code for the function uses less memory than the table itself.

Submitted by:	Hans Petter Selasky
2009-04-05 18:20:38 +00:00
Andrew Thompson
63521bbc5a MFp4 //depot/projects/usb@159871
- bugfixes after the memory usage reduction patch
- Use "udev->pipes_max" instead of USB_EP_MAX
- Use correct "bmRequestType" for getting the config descriptor.

Submitted by:	Hans Petter Selasky
2009-04-05 18:20:03 +00:00
Andrew Thompson
7efaaa9a91 MFp4 //depot/projects/usb@159811
First patch in a series of memory save patches.

Submitted by:	Hans Petter Selasky
2009-04-05 18:19:19 +00:00
Andrew Thompson
578d0eff90 MFp4 //depot/projects/usb @159431,159437,159438
- start using the new USB typedefs in the USB core
- Remove usage of USB_ADD_BYTES()

Submitted by:	Hans Petter Selasky
2009-03-20 21:50:54 +00:00
Andrew Thompson
bdc081c60f MFp4 //depot/projects/usb@159392
Add ifdefs for making parts of usb conditional.

Submitted by:	Hans Petter Selasky
2009-03-20 21:48:11 +00:00
Andrew Thompson
ab42e8b2df MFp4 //depot/projects/usb @159430
- Move tunable defines into usb_core.h and dependancy towards usb_defs.h
- Leave hardcoded defines in "usb_defs.h".
- Allow overriding all tunable defines.
- Add more customisable typedefs.
- Correct maximum device number.

Submitted by:	Hans Petter Selasky
2009-03-20 19:04:31 +00:00
Andrew Thompson
16589bea5b MFp4 //depot/projects/usb@157909
Changes to make implementing USB NDIS easier.

Submitted by:	Hans Petter Selasky
2009-02-24 03:40:48 +00:00
Andrew Thompson
4a35cda731 MFp4 //depot/projects/usb@157853
Clean up old way of polling the USB hardware.  The existing polling support was
a bit hackish.

Submitted by:	Hans Petter Selasky
2009-02-24 03:39:13 +00:00
Andrew Thompson
02ac645488 Move the new USB stack into its new home. 2009-02-23 18:31:00 +00:00