Eliminate bpf_buffer_alloc() and allocate BPF buffers on descriptor creation and BIOCSBLEN ioctl.
This permits us not to allocate buffers inside bpf_attachd() which is protected by global lock.
Approved by: kib(mentor)
MFC in: 4 weeks
'flags' field is added to the end of bpf_if structure. Currently the only
flag is BPFIF_FLAG_DYING which is set on bpf detach and checked by bpf_attachd()
Problem can be easily triggered on SMP stable/[89] by the following command (sort of):
'while true; do ifconfig vlan222 create vlan 222 vlandev em0 up ; tcpdump -pi vlan222 & ; ifconfig vlan222 destroy ; done'
Fix possible use-after-free when BPF detaches itself from interface, freeing bpf_bif memory,
while interface is still UP and there can be routes via this interface.
Freeing is now delayed till ifnet_departure_event is received via eventhandler(9) api.
Convert bpfd rwlock back to mutex due lack of performance gain (currently checking if packet
matches filter is done without holding bpfd lock and we have to acquire write lock if packet matches)
Approved by: kib(mentor)
MFC in: 4 weeks
Fix panic on tcpdump being attached to interface being removed (introduced by r233937, pointed by hrs@ and adrian@)
Protect most of bpf_setf() by BPF global lock
Add several forgotten assertions (thanks to adrian@)
Document current locking model inside bpf.c
Document EVENTHANDLER(9) usage inside BPF.
Approved by: kib(mentor)
Tested by: gnn
MFC in: 4 weeks
Linux and Solaris (at least OpenSolaris) has PF_PACKET socket families to send
raw ethernet frames. The only FreeBSD interface that can be used to send raw frames
is BPF. As a result, many programs like cdpd, lldpd, various dhcp stuff uses
BPF only to send data. This leads us to the situation when software like cdpd,
being run on high-traffic-volume interface significantly reduces overall performance
since we have to acquire additional locks for every packet.
Here we add sysctl that changes BPF behavior in the following way:
If program came and opens BPF socket without explicitly specifyin read filter we
assume it to be write-only and add it to special writer-only per-interface list.
This makes bpf_peers_present() return 0, so no additional overhead is introduced.
After filter is supplied, descriptor is added to original per-interface list permitting
packets to be captured.
Unfortunately, pcap_open_live() sets catch-all filter itself for the purpose of
setting snap length.
Fortunately, most programs explicitly sets (event catch-all) filter after that.
tcpdump(1) is a good example.
So a bit hackis approach is taken: we upgrade description only after second
BIOCSETF is received.
Sysctl is named net.bpf.optimize_writers and is turned off by default.
- While here, document all sysctl variables in bpf.4
Sponsored by Yandex LLC
Reviewed by: glebius (previous version)
Reviewed by: silence on -net@
Approved by: (mentor)
MFC after: 4 weeks
Interface locks and descriptor locks are converted from mutex(9) to rwlock(9).
This greately improves performance: in most common case we need to acquire 1
reader lock instead of 2 mutexes.
- Remove filter(descriptor) (reader) lock in bpf_mtap[2]
This was suggested by glebius@. We protect filter by requesting interface
writer lock on filter change.
- Cover struct bpf_if under BPF_INTERNAL define. This permits including bpf.h
without including rwlock stuff. However, this is is temporary solution,
struct bpf_if should be made opaque for any external caller.
Found by: Dmitrij Tejblum <tejblum@yandex-team.ru>
Sponsored by: Yandex LLC
Reviewed by: glebius (previous version)
Reviewed by: silence on -net@
Approved by: (mentor)
MFC after: 3 weeks
using the o32 ABI. This mostly follows nwhitehorn's lead in implementing
COMPAT_FREEBSD32 on powerpc64.
o) Add a new type to the freebsd32 compat layer, time32_t, which is time_t in the
32-bit ABI being used. Since the MIPS port is relatively-new, even the 32-bit
ABIs use a 64-bit time_t.
o) Because time{spec,val}32 has the same size and layout as time{spec,val} on MIPS
with 32-bit compatibility, then, disable some code which assumes otherwise
wrongly when built for MIPS. A more general macro to check in this case would
seem like a good idea eventually. If someone adds support for using n32
userland with n64 kernels on MIPS, then they will have to add a variety of
flags related to each piece of the ABI that can vary. That's probably the
right time to generalize further.
o) Add MIPS to the list of architectures which use PAD64_REQUIRED in the
freebsd32 compat code. Probably this should be generalized at some point.
Reviewed by: gonzo
bpf_iflist list which reference the specified ifnet. The existing implementation
only removes the first matching bpf_if found in the list, effectively leaking
list entries if an ifnet has been bpfattach()ed multiple times with different
DLTs.
Fix the leak by performing the detach logic in a loop, stopping when all bpf_if
structs referencing the specified ifnet have been detached and removed from the
bpf_iflist list.
Whilst here, also:
- Remove the unnecessary "bp->bif_ifp == NULL" check, as a bpf_if should never
exist in the list with a NULL ifnet pointer.
- Except when INVARIANTS is in the kernel config, silently ignore the case where
no bpf_if referencing the specified ifnet is found, as it is harmless and does
not require user attention.
Reviewed by: csjp
MFC after: 1 week
aspect of time stamp configuration per interface rather than per BPF
descriptor. Prior to this, the order in which BPF devices were opened and the
per descriptor time stamp configuration settings could cause non-deterministic
and unintended behaviour with respect to time stamping. With the new scheme, a
BPF attached interface's tscfg sysctl entry can be set to "default", "none",
"fast", "normal" or "external". Setting "default" means use the system default
option (set with the net.bpf.tscfg.default sysctl), "none" means do not
generate time stamps for tapped packets, "fast" means generate time stamps for
tapped packets using a hz granularity system clock read, "normal" means
generate time stamps for tapped packets using a full timecounter granularity
system clock read and "external" (currently unimplemented) means use the time
stamp provided with the packet from an underlying source.
- Utilise the recently introduced sysclock_getsnapshot() and
sysclock_snap2bintime() KPIs to ensure the system clock is only read once per
packet, regardless of the number of BPF descriptors and time stamp formats
requested. Use the per BPF attached interface time stamp configuration to
control if sysclock_getsnapshot() is called and whether the system clock read
is fast or normal. The per BPF descriptor time stamp configuration is then
used to control how the system clock snapshot is converted to a bintime by
sysclock_snap2bintime().
- Remove all FAST related BPF descriptor flag variants. Performing a "fast"
read of the system clock is now controlled per BPF attached interface using
the net.bpf.tscfg sysctl tree.
- Update the bpf.4 man page.
Committed on behalf of Julien Ridoux and Darryl Veitch from the University of
Melbourne, Australia, as part of the FreeBSD Foundation funded "Feed-Forward
Clock Synchronization Algorithms" project.
For more information, see http://www.synclab.org/radclock/
In collaboration with: Julien Ridoux (jridoux at unimelb edu au)
contain both a regular timestamp obtained from the system clock and the
current feed-forward ffcounter value. This enables new possibilities including
comparison of timekeeping performance and timestamp correction during post
processing.
- Add the net.bpf.ffclock_tstamp sysctl to provide a choice between timestamping
packets using the feedback or feed-forward system clock.
Committed on behalf of Julien Ridoux and Darryl Veitch from the University of
Melbourne, Australia, as part of the FreeBSD Foundation funded "Feed-Forward
Clock Synchronization Algorithms" project.
For more information, see http://www.synclab.org/radclock/
Submitted by: Julien Ridoux (jridoux at unimelb edu au)
The SYSCTL_NODE macro defines a list that stores all child-elements of
that node. If there's no SYSCTL_DECL macro anywhere else, there's no
reason why it shouldn't be static.
If a selinfo object is recorded (via selrecord()) and then it is
quickly destroyed, with the waiters missing the opportunity to awake,
at the next iteration they will find the selinfo object destroyed,
causing a PF#.
That happens because the selinfo interface has no way to drain the
waiters before to destroy the registered selinfo object. Also this
race is quite rare to get in practice, because it would require a
selrecord(), a poll request by another thread and a quick destruction
of the selrecord()'ed selinfo object.
Fix this by adding the seldrain() routine which should be called
before to destroy the selinfo objects (in order to avoid such case),
and fix the present cases where it might have already been called.
Sometimes, the context is safe enough to prevent this type of race,
like it happens in device drivers which installs selinfo objects on
poll callbacks. There, the destruction of the selinfo object happens
at driver detach time, when all the filedescriptors should be already
closed, thus there cannot be a race.
For this case, mfi(4) device driver can be set as an example, as it
implements a full correct logic for preventing this from happening.
Sponsored by: Sandvine Incorporated
Reported by: rstone
Tested by: pluknet
Reviewed by: jhb, kib
Approved by: re (bz)
MFC after: 3 weeks
- Allow setting format, resolution and accuracy of BPF time stamps per
listener. Previously, we were only able to use microtime(9). Now we can
set various resolutions and accuracies with ioctl(2) BIOCSTSTAMP command.
Similarly, we can get the current resolution and accuracy with BIOCGTSTAMP
command. Document all supported options in bpf(4) and their uses.
- Introduce new time stamp 'struct bpf_ts' and header 'struct bpf_xhdr'.
The new time stamp has both 64-bit second and fractional parts. bpf_xhdr
has this time stamp instead of 'struct timeval' for bh_tstamp. The new
structures let us use bh_tstamp of same size on both 32-bit and 64-bit
platforms without adding additional shims for 32-bit binaries. On 64-bit
platforms, size of BPF header does not change compared to bpf_hdr as its
members are already all 64-bit long. On 32-bit platforms, the size may
increase by 8 bytes. For backward compatibility, struct bpf_hdr with
struct timeval is still the default header unless new time stamp format is
explicitly requested. However, the behaviour may change in the future and
all relevant code is wrapped around "#ifdef BURN_BRIDGES" for now.
- Add experimental support for tagging mbufs with time stamps from a lower
layer, e.g., device driver. Currently, mbuf_tags(9) is used to tag mbufs.
The time stamps must be uptime in 'struct bintime' format as binuptime(9)
and getbinuptime(9) do.
Reviewed by: net@
Add missing CURVNET_RESTORE() calls for multiple code paths, to stop
leaking the currently cached vnet into callers and to the process.
Sponsored by: The FreeBSD Foundation
Sponsored by: CK Software GmbH
MFC after: 4 days
bd_compat32 field of struct bpf_d is kept unconditionally to not
impose the requirement of including "opt_compat.h" on all numerous
users of bpfdesc.h.
Submitted by: jhb (version for 6.x)
Reviewed and tested by: emaste
MFC after: 2 weeks
- Add a missing callout_drain(9) before the descriptor deallocation.[1]
- Prefer callout_init_mtx(9) over callout_init(9) and let the callout
subsystem handle the mutex for callout function.
PR: kern/144453
Submitted by: Alexander Sack (asack at niksun dot com)[1]
MFC after: 1 week
vnet.h, we now use jails (rather than vimages) as the abstraction
for virtualization management, and what remained was specific to
virtual network stacks. Minor cleanups are done in the process,
and comments updated to reflect these changes.
Reviewed by: bz
Approved by: re (vimage blanket)
Add necessary changes to the kernel for this (basically introduce a
bpf_zero_counters() function). As well, update the man page.
MFC after: 1 month
Discussed with: rwatson
vnode interlock to protect the knote fields [1]. The locking assumes
that shared vnode lock is held, thus we get exclusive access to knote
either by exclusive vnode lock protection, or by shared vnode lock +
vnode interlock.
Do not use kl_locked() method to assert either lock ownership or the
fact that curthread does not own the lock. For shared locks, ownership
is not recorded, e.g. VOP_ISLOCKED can return LK_SHARED for the shared
lock not owned by curthread, causing false positives in kqueue subsystem
assertions about knlist lock.
Remove kl_locked method from knlist lock vector, and add two separate
assertion methods kl_assert_locked and kl_assert_unlocked, that are
supposed to use proper asserts. Change knlist_init accordingly.
Add convenience function knlist_init_mtx to reduce number of arguments
for typical knlist initialization.
Submitted by: jhb [1]
Noted by: jhb [2]
Reviewed by: jhb
Tested by: rnoland
and used in a large number of files, but also because an increasing number
of incorrect uses of MAC calls were sneaking in due to copy-and-paste of
MAC-aware code without the associated opt_mac.h include.
Discussed with: pjd
previously always pointing to the default vnet context, to a
dynamically changing thread-local one. The currvnet context
should be set on entry to networking code via CURVNET_SET() macros,
and reverted to previous state via CURVNET_RESTORE(). Recursions
on curvnet are permitted, though strongly discuouraged.
This change should have no functional impact on nooptions VIMAGE
kernel builds, where CURVNET_* macros expand to whitespace.
The curthread->td_vnet (aka curvnet) variable's purpose is to be an
indicator of the vnet context in which the current network-related
operation takes place, in case we cannot deduce the current vnet
context from any other source, such as by looking at mbuf's
m->m_pkthdr.rcvif->if_vnet, sockets's so->so_vnet etc. Moreover, so
far curvnet has turned out to be an invaluable consistency checking
aid: it helps to catch cases when sockets, ifnets or any other
vnet-aware structures may have leaked from one vnet to another.
The exact placement of the CURVNET_SET() / CURVNET_RESTORE() macros
was a result of an empirical iterative process, whith an aim to
reduce recursions on CURVNET_SET() to a minimum, while still reducing
the scope of CURVNET_SET() to networking only operations - the
alternative would be calling CURVNET_SET() on each system call entry.
In general, curvnet has to be set in three typicall cases: when
processing socket-related requests from userspace or from within the
kernel; when processing inbound traffic flowing from device drivers
to upper layers of the networking stack, and when executing
timer-driven networking functions.
This change also introduces a DDB subcommand to show the list of all
vnet instances.
Approved by: julian (mentor)
consumers which fork after the shared pages have been setup. pflogd(8)
is an example. The problem is understood and there is a fix coming in
shortly.
Folks who want to continue using it can do so by setting
net.bpf.zerocopy_enable
to 1.
Discussed with: rwatson
are not currently owned by userspace before clearing or rotating them.
Otherwise we may not play by the rules of the shared memory protocol,
potentially corrupting packet data or causing userspace applications
that are playing by the rules to spin due to being notified that a
buffer is complete but the shared memory header not reflecting that.
This behavior was seen with pflogd by a number of reporters; note that
this fix is not sufficient to get pflogd properly working with
zero-copy BPF, due to pflogd opening the BPF device before forking,
leading to the shared memory buffer not being propery inherited in the
privilege-separated child. We're still deciding how to fix that
problem.
This change exposes buffer-model specific strategy information in
reset_d(), which will be fixed at a later date once we've decided how
best to improve the BPF buffer abstraction.
Reviewed by: csjp
Reported by: keramida
whitespace) macros from p4/vimage branch.
Do a better job at enclosing all instantiations of globals
scheduled for virtualization in #ifdef VIMAGE_GLOBALS blocks.
De-virtualize and mark as const saorder_state_alive and
saorder_state_any arrays from ipsec code, given that they are never
updated at runtime, so virtualizing them would be pointless.
Reviewed by: bz, julian
Approved by: julian (mentor)
Obtained from: //depot/projects/vimage-commit2/...
X-MFC after: never
Sponsored by: NLnet Foundation, The FreeBSD Foundation
Right now the bpf(4) driver uses the cloning API to generate /dev/bpf%u.
When an application such as tcpdump needs a BPF, it opens /dev/bpf0,
/dev/bpf1, etc. until it opens the first available device node. We used
this approach, because our devfs implementation didn't allow
per-descriptor data.
Now that we can, make it use devfs_get_cdevpriv() to obtain the private
data. To remain compatible with the existing implementation, add a
symlink from /dev/bpf0 to /dev/bpf. I've already changed libpcap to
compile with HAVE_CLONING_BPF, which makes it use /dev/bpf. There may be
other applications in the base system (dhclient) that use the loop to
obtain a valid bpf.
Discussed on: src-committers
Approved by: csjp
There is no way for the caller to tell us which direction this packet is
going. With the bpf_mtap{2} routines, we can check the interface pointer.
MFC after: 2 weeks
