0xefbfe000) and kernel_start (normally 0xf0100000).
Things are unnecessarily (?) difficult because procfs is used to
access user addresses in the live-kernel case although we must have
access to /dev/mem to work at all, and whatever works for the
dead-kernel case should work in all cases (modulo volatility of
live kernel variables). We used the wrong range [0, kernel_start)
for user addresses. Procfs should only work up to VM_MAXUSER_ADDRESS,
but it bogusly works for reads up to the address 2 pages higher
(the user area, including the kernel stack, is mapped to where the
user area used to be (WTUAUTB)). Procfs can not work at all for
addresses between WTUAUTB and kernel_start.
Now we use procfs only to access addresses up to VM_MAXUSER_ADDRESS.
Higher addresses are translated normally using kvtophys(), so the
user ptd is used for addresses below the real kernel start (0xf0000000;
see INKERNEL()) and nothing is found WTUAUTB.
Strange accesses that cross the user-kernel boundary are now handled,
but such ranges are currently always errors because they necessarily
overlap the hole WTUAUTB.
Short reads are still not handled.
Correct translations would have been null. However, kstack was
the top of the kernel stack instead of the base of the kernel stack
like it was when the kernel exported it, so the area above the
kernel stack was mistranslated and the kernel stack was not
translated. This bug was depended on to compensate for the wrong
value of kstack - to read the pcb, instead of just using the address
of the pcb, we used the mistranslated address of kstack, which
happened to be the same (curpcb = kstack - 0x2000).
This area is simpler than it used to be now that the kernel stack
address is per-process. The code still seems to be more complicated
than necessary - the `found_pcb == 0' case seems to be unused.
gdb was cloned from the buggy version of kvm_uread() in libkvm and
had the same bugs. It looped endlessly on EOF and checked errno
without setting it in the lseek() error check. The first bug caused
gdb to loop endlessly for reads from addresses between the end of
the user area and the start of the kernel text. kvm_uread() should
not be used for addresses beyond the end of the user area, but is
due to bugs elsewhere.
the previous frame is in the usual place even for traps, interrupts
and syscalls in the kernel, because the assembly language stubs
don't change the frame pointer. The previous frame is just not for
the calling function. We may as well depend on this as on magic to
determine the trap frame address. The magic is in FRAME_SAVED_PC()
which elides the correct number of stubs (1) to go back to a pc that
matches the previous frame.
Removing fbsd_kern_frame_chain() fixes bugs in it. Xsyscall was
misspelled as _Xsyscall (gdb removes one leading underscore), so
the tf_syscall frame type was never found. This was harmless
because tf_normal works in all cases in fbsd_kern_frame_chain()
and Xsyscall is spelled correctly in fbsd_kern_frame_saved_pc()
where it matters. There were style bugs on almost every line,
starting with a primary indent of 7.
machine independent, with the only dependency being the binary format
to build. We only expect to build ELF on alpha although we'll need
ECOFF compatibility with Digital Unix.
reduces to a relocatable symbol plus an offset. This preserves
the symbol type information (function vs. object). It is important
for SVR4-style weak symbols, e.g., "#pragma weak foo=bar". Without
this change, the linker complains that the jmpslot entry is not a
function.
Submitted by: Robert Eckardt <roberte@MEP.Ruhr-Uni-Bochum.de>
Sundry man page fixes; handle Central European Summer Time (CEST);
usage fixes in line with man page fixes.
It maybe right, if patch was FreeBSD-own program, but it break compatibility
with pre-existent patches in other systems.
The example is big ncurses patch which don't apply on FreeBSD
due to "fixed" precedence.
confused when they can't find it), but leave the reference to it
as being a standard filename (which doesn't imply that it exists).
Discussed with: jkh
Enabled this new feature with the makefile variable GREP_LIBZ. If
you don't like it, compile with `make GREP_LIBZ='.
grep + zlib has several advantages:
- the shell script zgrep(1) will be basically a one line
exec grep -Z "$@"
- no shell script, no bugs. The current zgrep implementations
have many bugs and some grep options are no supported.
- no shell script, no security risks.
- it is a magnitude faster than a shell script
Also fixed:
0 -> STDIN_FILENO
Close a file descriptor only if the open call was successfully. It does
not hurt for the open(2) function, but the gzclose(3) function
died in free() to free up (not) allocated memory.
following "panic:" or "Fatal trap". `panicstr' is still printed,
although it is redundant if there is a valid message buffer and
incomplete if it contains `%'s. I think the awk command belongs
here and not in a script since a standard format with complete
messages is good for bug reports.
emacs a.out file, self-generated by emacs's "unexec" function in
"unexsunos4.c", is invalid. In particular, its "_end" symbol has
the wrong value. The dynamic linker was using the value of that
symbol to initialize its sbrk break level.
The workaround is to peek at the executable's a.out header in
memory, and calculate what "_end" should be based on the segment
sizes.
I will work out a fix for emacs and send it to the FSF. This
dynamic linker workaround is still worthwhile, if only to avoid
forcing all emacs users to build a new version.
Note: xemacs gives a bogus warning at startup, for related reasons.
The warning is harmless and can safely be ignored. I will send a
patch to the xemacs maintainers to get rid of it, and meanwhile
add a patch file to our port.
things so that it uses the same malloc as is used by the program
being executed. This has several advantages, the big one being
that you can now debug core dumps from dynamically linked programs
and get useful information out of them. Until now, that didn't
work. The internal malloc package placed the tables describing
the loaded shared libraries in a mapped region of high memory that
was not written to core files. Thus the debugger had no way of
determining what was loaded where in memory. Now that the dynamic
linker uses the application's malloc package (normally, but not
necessarily, the system malloc), its tables end up in the regular
heap area where they will be included in core dumps. The debugger
now works very well indeed, thank you very much.
Also ...
Bring the program a little closer to conformance with style(9).
There is still a long way to go.
Add minimal const correctness changes to get rid of compiler warnings
caused by the recent const changes in <dlfcn.h> and <link.h>.
Improve performance by eliminating redundant calculations of symbols'
hash values.
Implemented reading of %fs and %gs from core files.
Print weird floating point values better. We have to convert long
doubles to doubles here because of limitations and bugs in printf()
and floatformat_to_double() (long doubles aren't really supported
and naive converion to double causes exceptions). Conversion loses
information about weird formats (everything becomes a quiet NaN),
and printf() doesn't know about different types of NaNs anyway.
plain 0 should be used. This happens to work because we #define
NULL to 0, but is stylistically wrong and can cause problems
for people trying to port bits of code to other environments.
PR: 2752
Submitted by: Arne Henrik Juul <arnej@imf.unit.no>
Bring the style of sods.c into better conformance. Add code to
print the contents of each datum being relocated. Correct the logic
that distinguishes between programs, shared libraries, and object
files. Make the entire program "-Wall" clean.
file based on the previous list of directories stored there which
should overcome a weakness of the '-m' switch which can only add
libs. This is an ideal way of updating the hints list after adding
or removing a shlib since it will remove entries that are gone and
doesn't need to have all the directories spelled out each time.
(eg: rm -f /usr/lib/libtcl75*; ldconfig -R) This only works for
version 2 hints files (which we've been generating for a year or
so) which store the path.
reference to the programming manual. Use this near-copy of the version
of hsuser.texinfo in contrib/libreadline instead of the stale near-copy
in contrib/gdb.
Add a -Bforcedynamic option which generates a dynamic object even
if no shared libraries were given in the link.
Make RRS in text section warnings conditional on "-assert pure-text"
so that I can link non-PIC kernel modules without tons of link
errors. Changes to bsd.lib.mk to follow.
Fix a couple of bugs exposed by the fact that the kernel is not
linked at zero.
Reviewed by: jdp
take the easy way out and implement the beginnings of something similar.
Don't worry, the code here is *dormant* so far, some "help" from cvs is
required. This is going in now so that jdp can see what I'm working on.
This is an extension of the previous existing skeleton $FreeBSD$ code.
because 2 references to _initialize_kcorelow (the other one
from kvm-fbsd.c) resulted. This prevented gdb from working correectly.
delete kcorelow.c from XSRCS in the Makefile.
punning the pcb to an array of ints and using magic indices to
access values in it. This should prevent silent breakage from
changes in the pcb.
Supply 0 for unavailable registers instead of punning the tss to
an array of ints and using magic indices to access garbage values
in it. (The registers are in the pcb; there is nothing interesting
in the tss. This should change someday. At least for dumps, all
the registers should be saved, and common_tss is a good place to
put them.)
Removed ancient wrong (disabled) method for reading eip.
sense to have a weak symbol that is not externally visible. This
fixes many of the "relocation burb" warnings produced when compiling
C++ code with "-fpic". Beyond eliminating warnings, it also makes
some things work that didn't work before.
(ignored :-() errors for `make depend' in /sys/i386/boot/*. It's
natural for there to be no libraries there and inconvenient to check
for this in bsd.prog.mk.
ld-specific flags. LDFLAGS is really for ld-related flags for cc,
not for ld, and some flags, e.g., -Bshareable, mean completely
different things to cc and ld. Having the wrong things in LDFLAGS
also broke the standard ${PROG} target. This was kludged around
by using a special rule that depended on LDFLAGS being bogus.
Fixing `make depend' broke the special rule but fixed the standard
rule (except in the DESTDIR case, which was handled more strictly
here than elsewhere).
dependency on `bar' is very unlikely to be correct.
This is a quick fix for broken dependencies in gdb and many other
places. The dependencies on internal libraries are now missing
instead of wrong when `make depend' is run before the libraries
are created.
directory. config.h is always in the current (= object) directory,
so don't search for it.
config.h is not a source for the library, so don't put it in SRCS and
don't make the library depend on it.
Don't put unused flags in CFLAGS.
Simplify using INTERNALLIB*.
- LDADD was wrong for non-uniform obj trees.
- DPADD was wrong for separate obj tres.
Cleaned up nearby messes, mostly ones invoving paths:
- ../libtxi was useless.
- there were too many redefinitions and too many different names for the
same paths.
- use INTERNALLIB* to simplify libtxi/Makefile.
- LDADD was wrong for non-uniform obj trees.
- DPADD was wrong for separate obj tres.
Cleaned up nearby messes, mostly ones invoving paths:
- -I../libtxi was useless.
- there were too many redefinitions and too many different names for the
same paths.
- use INTERNALLIB* to simplify libtxi/Makefile.
UPAGES layout.. it was entirely too comfortable with reading and writing
the U area before. I've changed it to use PT_GETREGS/PT_PUTREGS
ptrace ops instead of READ_U etc. The code to read the registers from
core dumps is a bandaid at best. It seems to have problems reading
core dumps from dynamic linked executables still, but at least static
dumps work.
I desperately need help from a gdb/bfd expert. :-) HELP!!
of binutils. For all architectures and object file formats,
".p2align n" aligns to the next multiple of 2**n. Thus for FreeBSD,
it does exactly the same thing as the traditional ".align".
The old ".align" directive has different meanings in different
object formats, and even in different variants of a.out. Sometimes
is aligns to a multiple of n, and other times it aligns to a multiple
of 2**n. ".p2align" is preferable for use in assembly language
sources, since it makes them more portable to object formats other
than a.out.
Strong 2.2 and 2.1.x candidate. Someone should review the patch before,
however.
The maintainer of the Perl5 port should probably introduce a similar patch
there.
"%%" in format strings and tends to dump core for "%%st". I needed
"%%st" to fix the new gdb ...
Don't use the private version of strerror() either.
Use INTERNALLIB and INTERNALSTATICLIB instead of a private install
rules NOPROFILE and NOPIC. This is only slightly cleaner.
INTERNALLIB was previously only used in compatibility libraries
(libgnumalloc etc.) and INTERNALSTATICLIB was previously unused.
INTERNAL*LIB probably should be replaced by something like NOSTATICO
together with NO{STATICO,PROFILE,PIC}INSTALL.
controlling terminal is closed. Now the function ask() will return 1 when th
input is known to come from a file or terminal, or it will return 0 when ther
was a read error.
Modified the question "Skip patch?" so that on an error from ask it will skip
the patch instead of looping.
Closes PR#777
2.2 candidate
library with a shared object dependency that contained alias symbols,
the linker incorrectly counted the number of symbols that would be
written, resulting in a fatal internal error. Since our libc now
contains some alias symbols (in "net/res_stubs.c"), this was
sufficient to tickle the bug: "ld -Bshareable foo.so -lc". To
fix it, I moved the accounting of alias symbols to a later point
in the processing, where it is possible to count only those symbols
that will actually be written to the output file.
This fix is well-confined to affect alias symbols only. I have
tested it with a full "make world". I am going to merge it into
-2.2 after a few more days of living with it in -current.
If it is set to a nonempty string, then simply skip any missing
shared libraries. This came up in a discussion long ago as a
potentially useful feature at sysinstall time. For example, an
X11 utility could be used without the X libraries being present,
provided the utility had a mode in which no X functions were actually
called.
by the -DNO_MMALLOC flag in gdb/Makefile.
The one thing we lose by doing this, AFAIK, is the possibility of using
mmap. Does anyone use that feature at all ?
2.2 candidate ?
files using the texi sources in /usr/src/contrib/gdb/gdb/doc.
I put a pointer to /usr/src/contrib/libreadline/doc into
Makefile.inc in the hope that the appropriate files would be
picked up.
This is based on /usr/ports/devel/gdb.
2.2 candidate ?
This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so long.
Boy, I'm glad we're not using sup anymore. This update would have been
insane otherwise.
nonempty string, then function calls are relocated at program start-up
rather than lazily. This variable is standard on Sun and SVR4 systems.
The dlopen() function now supports both lazy and immediate binding, as
determined by its "mode" argument, which can be either 1 (RTLD_LAZY) or
2 (RTLD_NOW). I will add defines of these symbols to <dlfcn.h> as soon
as I've done a little more checking to make sure they won't cause
collisions or bootstrapping problems that would break "make world".
The "LD_*" environment variables which alter dynamic linker behavior are
now treated as unset if they are set to the empty string. This agrees
with the standard SVR4 conventions for the dynamic linker.
Add a work-around for programs compiled with certain buggy versions of
crt0.o. The buggy versions failed to set the "crt_ldso" member of the
interface structure. This caused certain error messages from the
dynamic linker to begin with "(null)" instead of the pathname of the
dynamic linker.
nonempty string, then function calls are relocated at program start-up
rather than lazily. This variable is standard on Sun and SVR4 systems.
The dlopen() function now supports both lazy and immediate binding, as
determined by its "mode" argument, which can be either 1 (RTLD_LAZY) or
2 (RTLD_NOW). I will add defines of these symbols to <dlfcn.h> as soon
as I've done a little more checking to make sure they won't cause
collisions or bootstrapping problems that would break "make world".
Change CATMODE to 0644, because group man not used
Add immutable sbit to man binary, so if user even got man uid,
he can't replace man binary with fake one
Should go to 2.2
Submitted by: Marc Slemko <marcs@znep.com> with small editing by me
