on i386-class hardware for sinl and cosl. The hand-rolled argument
reduction have been replaced by e_rem_pio2l() implementations. To
preserve history the following commands have been executed:
svn cp src/e_rem_pio2.c ld80/e_rem_pio2l.h
mv ${HOME}/bde/ld80/e_rem_pio2l.c ld80/e_rem_pio2l.h
svn cp src/e_rem_pio2.c ld128/e_rem_pio2l.h
mv ${HOME}/bde/ld128/e_rem_pio2l.c ld128/e_rem_pio2l.h
The ld80 version has been tested by bde, das, and kargl over the
last few years (bde, das) and few months (kargl). An older ld128
version was tested by das. The committed version has only been
compiled tested via 'make universe'.
Approved by: das (mentor)
Obtained from: bde
- While here, remove a few C comments that don't seem to contribute
anything additional to the man page.
PR: 146047
Submitted by: arundel
MFC after: 3 days
used a global pthread_mutex_t for synchronization. r179417 replaced that
with an implementation that directly used atomic instructions and thr_*
syscalls to synchronize callers to pthread_once. However, calling
pthread_mutex_lock on the global mutex implicitly ensured that
_thr_check_init() had been called but with r179417 this was no longer
guaranteed. This meant that if you were unlucky enough to have your first
call into libthr be a call to pthread_once(), you would segfault when
trying to access the pointer returned by _get_curthread().
The fix is to explicitly call _thr_check_init() from pthread_once().
Reviewed by: davidxu
Approved by: emaste (mentor)
MFC after: 1 week
vop_stdallocate() is filesystem agnostic and will run as slow as a
read/write loop in userspace; however, it serves to correctly
implement the functionality for filesystems that do not implement a
VOP_ALLOCATE.
Note that __FreeBSD_version was already bumped today to 900036 for any
ports which would like to use this function.
Also reserve space in the syscall table for posix_fadvise(2).
Reviewed by: -arch (previous version)
prefixes (Ki, Mi, Gi...) for humanize_number(3).
Note that applications has to pass HN_IEC_PREFIXES to use this
feature for backward compatibility reasons.
Reviewed by: arundel
MFC after: 2 weeks
negative return value from write to update its position in
a buffer. The patch, courtesy of Andrey Simonenko, also simplifies
a conditional by removing the "i != cnt" clause, since it is
always true at this point in the code. The bug caused problems
for mountd, when it generated a large reply to an exports RPC
request.
Submitted by: simon at comsys.ntu-kpi.kiev.ua
MFC after: 2 weeks
Of course, strerror_r() may still fail with ERANGE.
Although the POSIX specification said this could fail with EINVAL and
doing this likely indicates invalid use of errno, most other
implementations permitted it, various POSIX testsuites require it to
work (matching the older sys_errlist array) and apparently some
applications depend on it.
PR: standards/151316
MFC after: 1 week
{readline,history}.h are in /usr/include/edit so as to not conflict with
the GNU libreadline versions. To use the libedit readline(3) one should
add "-I/usr/include/edit" to their Makefile
(spelled "-I${DESTDIR}/${INCLUDEDIR}/edit" within the FreeBSD source tree).
* Enable its use in the BSD licensed utilities that support readline(3).
* To make it easier to sync libedit development with NetBSD, histedit.h
is moved into libedit's directory as history shows shown we keep merging
it into that location.
Obtained from: NetBSD
Sponsored by: Juniper Networks
integer overflow when the input is very large (for example, 100 Pi would
become about 10 Ei which exceeded signed int64_t).
Solve this issue by splitting the division into two parts and avoid the
multiplication.
PR: bin/146205
Reviewed by: arundel
MFC after: 1 month
syscall assembly files. This results in conflicting dependencies and can
cause unexpected results for parallel builds. This is because the .c file
and the .S file both generate the same .o file.
Submitted by: Simon Gerraty <sjg@juniper.net>
Sponsored by: Juniper Networks
The "FTS_NOSTAT" option can avoid a lot of calls to stat(2) if it knows that a
directory could not possibly have subdirectories. This is decided by looking at
the link count: a subdirectory would increment its parent's link count by
virtue of its own ".." entry. This assumption only holds for UFS-like
filesystems that implement links and directories this way, so we must punt for
others.
It looks like ZFS is a UFS-like file system, as the above also holds for ZFS.
Add ZFS to the list of file systems that allow for such optimization.
MFC after: 1 month
Calling rfork_thread(3) does not interoperate with pthreads and global state
is not properly protected.
Remove the BUGS section suggesting LinuxThreads entirely. With the current
pthread library libthr, all threads are kernel-level entities so there seems
little reason to use LinuxThreads.
with r219571 and re-enable building of cbrtl.
Implement the long double version for the cube root function, cbrtl.
The algorithm uses Newton's iterations with a crude estimate of the
cube root to converge to a result.
Reviewed by: bde
Approved by: das
behavior, where the module checks that the supplicant is a member of the
required group. The latter checks the target user instead. If neither
option was specified, pam_group(8) assumes "ruser" and issues a warning.
I intend to eventually change the default to "luser" to match the
behavior of similarly-named service modules in other operating systems.
MFC after: 1 month
support for it. Note that while sparc64 also supports the static TLS
model and thus tls_model("initial-exec"), using the default model
turned out to yield slightly better buildstone performance.
- If precision is 0, don't print period followed by no digits.
- If precision is 0 stop printing units as soon as possible
(eg. if we have three years and five days and precision is 0
print only 3y5d).
- If precision is not 0, print all units (eg. 3y0d0h0m0s.00).
MFC after: 2 weeks
it possible for the kernel to track login class the process is assigned to,
which is required for RCTL. This change also make setusercontext(3) call
setloginclass(2) and makes it possible to retrieve current login class using
id(1).
Reviewed by: kib (as part of a larger patch)
entries instead of six). This makes "setfacl -b" do the right thing
for ACLs on ZFS. UFS recognizes both kinds of trivial ACLs; no change
there.
MFC after: 2 months
can link against them. Add man pages for the new system calls, with one
errant forward reference to changes not yet present in FreeBSD, but soon
will be.
Reviewed by: anderson
Obtained from: Capsicum Project
Sponsored by: Google, Inc.
Discussed with: benl, kris, pjd
MFC after: 3 months
kernel.debug (or possibly other files), when WITH_CTF is active.
This is caused by a bug in clang's integrated assembler, causing malloc
to sometimes hang during initialization in statically linked executables
that use threading, such as the copy of ctfmerge that is built during
the bootstrap stage of buildworld. The bug has been submitted upstream:
http://llvm.org/bugs/show_bug.cgi?id=9352
Note that you might have to rebuild and install libc first, to get your
kernel build to finish, because the ctfmerge binary built during
bootstrap is linked with your base system's copy of libc.a, which might
already contain a bad copy of malloc.o.
There are several bugfixes in this update, but the most important one is
to ensure __start_ and __stop_ symbols for linker sets and kernel module
metadata are always emitted in object files:
http://llvm.org/bugs/show_bug.cgi?id=9292
Before this fix, if you compiled kernel modules with clang, they would
not be properly processed by kldxref, and if they had any dependencies,
the kernel would fail to load those. Another problem occurred when
attempting to mount a tmpfs filesystem, which would result in 'operation
not supported by device'.
setting. It can be built by setting the WITH_ICONV knob. While this
knob is unset, the library part, the binaries, the header file and
the metadata files will not be built or installed so it makes no impact
on the system if left turned off.
This work is based on the iconv implementation in NetBSD but a great
number of improvements and feature additions have been included:
- Some utilities have been added. There is a conversion table generator,
which can compare conversion tables to reference data generated by
GNU libiconv. This helps ensuring conversion compatibility.
- UTF-16 surrogate support and some endianness issues have been fixed.
- The rather chaotic Makefiles to build metadata have been refactored
and cleaned up, now it is easy to read and it is also easier to add
support for new encodings.
- A bunch of new encodings and encoding aliases have been added.
- Support for 1->2, 1->3 and 1->4 mappings, which is needed for
transliterating with flying accents as GNU does, like "u.
- Lots of warnings have been fixed, the major part of the code is
now WARNS=6 clean.
- New section 1 and section 5 manual pages have been added.
- Some GNU-specific calls have been implemented:
iconvlist(), iconvctl(), iconv_canonicalize(), iconv_open_into()
- Support for GNU's //IGNORE suffix has been added.
- The "-" argument for stdin is now recognized in iconv(1) as per POSIX.
- The Big5 conversion module has been fixed.
- The iconv.h header files is supposed to be compatible with the
GNU version, i.e. sources should build with base iconv.h and
GNU libiconv. It also includes a macro magic to deal with the
char ** and const char ** incompatibility.
- GNU compatibility: "" or "char" means the current local
encoding in use
- Various cleanups and style(9) fixes.
Approved by: delphij (mentor)
Obtained from: The NetBSD Project
Sponsored by: Google Summer of Code 2009
As it was pointed out by Alan Cox, that no longer serves its purpose with
the modern UMA allocator compared to the old one used in 4.x days.
The removal of sysctl eliminates max_proc_mmap type overflow leading to
the broken mmap(2) seen with large amount of physical memory on arches
with factually unbound KVA space (such as amd64). It was found that
slightly less than 256GB of physmem was enough to trigger the overflow.
Reviewed by: alc, kib
Approved by: avg (mentor)
MFC after: 2 months
ctfconvert will corrupt object files that are compiled with -g, if it is
not run with -g itself.
To fix it, remove -g from CFLAGS in lib/librt/Makefile. If you need to
compile this library with debug info, use DEBUG_FLAGS=-g instead, which
will work correctly, even when using WITH_CTF.
The existing implementation of bzero incorrectly clears bytes when the
start address is not word aligned. Fix it by using REG_SHI macro which
works on both 32 and 64 bit.
Submitted by: Artem Belevich (fbsdlist at src cx)
Most of the ports I broke when I imported utmpx, were simple management
utilities for the utmp database, allowing you to add/remove entries
manually.
Add a small tool called utxrm(8), which allows you to remove an entry
from the utmpx database by hand. This is useful when a login daemon
crashes or fails to remove the entry during shutdown.
have an executable stack, due to linking in hand-assembled .S or .s
files, that have no .GNU-stack sections:
RWX --- --- /lib/libcrypto.so.6
RWX --- --- /lib/libmd.so.5
RWX --- --- /lib/libz.so.6
RWX --- --- /lib/libzpool.so.2
RWX --- --- /usr/lib/liblzma.so.5
These were found using scanelf, from the sysutils/pax-utils port.
Reviewed by: kib
the construct like printf("%\s", NULL) resulting from macroexpand of
ERROR(u, NULL), making it impossible to use LIBUFS_DEBUGGING.
With inline function, compiler cannot detect the NULL argument to
known function and does not try to convert it into puts().
In collaboration with: pho
calling thread's unique integral ID, which is similar to AIX function of
the same name. Bump __FreeBSD_version to note its introduction.
Reviewed by: kib
All 9.6 users with DNSSEC validation enabled should upgrade to this
version, or the latest version in the 9.7 branch, prior to 2011-03-31
in order to avoid validation failures for names in .COM as described
here:
https://www.isc.org/announcement/bind-9-dnssec-validation-fails-new-ds-record
In addition the fixes for this and other bugs, there are also the
following:
* Various fixes to kerberos support, including GSS-TSIG
* Various fixes to avoid leaking memory, and to problems that could
prevent a clean shutdown of named
