Commit Graph

10 Commits

Author SHA1 Message Date
Jake Burkholder
e39756439c Back out the previous change to the queue(3) interface.
It was not discussed and should probably not happen.

Requested by:		msmith and others
2000-05-26 02:09:24 +00:00
Jake Burkholder
740a1973a6 Change the way that the queue(3) structures are declared; don't assume that
the type argument to *_HEAD and *_ENTRY is a struct.

Suggested by:	phk
Reviewed by:	phk
Approved by:	mdodd
2000-05-23 20:41:01 +00:00
Bill Paul
bd80fa2c7f Reoganize/update the SysKonnect driver:
- Break out the support for the XMAC II's PHY into an miibus driver.

- Reorganize the probe/attach stuff using newbus. Each XMAC is now
  attached to the parent GEnesis controller using newbus. This is
  necessary since each XMAC must also have an attached miibus, and
  the miibus read/write register routines need to be able to get
  at the softc struct for each XMAC, not the one for the parent
  controller. This allows me to get rid of the grotty code I added
  for selecting the unit numbers for the ifnet interfaces: the unit
  numbers are now derived from the newbus-assigned unit numbers,
  which should track with the ifnet interface numbers. I think.
  At the very least, there should never be any collisions.

- Add support for the SK-9821 and SK-9822 1000baseTX adapters. Special
  thanks to SysKonnect for loaning me two adapters for testing.
2000-04-22 02:16:41 +00:00
Bill Paul
2c0431ecf6 Fix the mechanism used to choose the unit numbers for the IP interfaces
attached by the SysKonnect driver. Use ifunit() to scan for existing
skN interfaces and pick the first unused one.
1999-09-18 04:01:31 +00:00
Peter Wemm
c3aac50f28 $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
Bill Paul
39d837d4b5 Dangit. Somehow the pmap_kextract hack for alpha snuck back into these
files. Change them back to alpha_XXX_dmamap().

Pointed out by: Andrew Gallatin
1999-07-23 02:18:01 +00:00
Bill Paul
e11a2e3d81 Convert the SysKonnect gigabit ethernet driver to newbus. 1999-07-22 04:04:12 +00:00
Bill Paul
ab03d8e65f Make a few other cleanups while I'm in the area. Typo in comment, unused
structure members, etc. No functional changes.
1999-07-14 21:53:11 +00:00
Bill Paul
05919c5b73 if_sk.c: use pci_port_t instead of u_short
if_skreg.h: use alpha_XXX_dmamap() instead of pmap_kextract hackery on
alpha platform
1999-07-09 17:36:23 +00:00
Bill Paul
3ebb090530 This commit adds driver support for the SysKonnect SK-984x series
gigabit ethernet adapters. This includes two single port cards
(single mode and multimode fiber) and two dual port cards (also single
mode and multimode fiber). SysKonnect is currently the only
vendor with a dual port gigabit ethernet NIC.

The ports on dual port adapters are treated as separate network
interfaces. Thus, if you have an SK-9844 dual port SX card, you
should have both sk0 and sk1 interfaces attached. Dual port cards
are implemented using two XMAC II chips connected to a single
SysKonnect GEnesis controller. Hence, dual port cards are really
one PCI device, as opposed to two separate PCI devices connected
through a PCI to PCI bridge. Note that SysKonnect's drivers use
the two ports for failover purposes rather that as two separate
interfaces, plus they don't support jumbo frames. This applies to
their Linux driver too. :)

Support is provided for hardware multicast filtering, BPF and
jumbo frames. The SysKonnect cards support TCP checksum offload
however this feature is not currently enabled (hopefully it will
be once we get checksum offload support).

There are still a few things that need to be implemeted, like
the ability to communicate with the on-board LM80 voltage/temperature
monitor, but I wanted to get the driver under CVS control and into
-current so people could bang on it.

A big thanks for SysKonnect for making all their programming info
for these cards (and for their FDDI and token ring cards) available
without NDA (see www.syskonnect.com).
1999-07-09 04:30:09 +00:00