After resource allocation and release, resource list entry
stays non-NULL. This causes panic in ofwbus_alloc_resource()
on subsequent resource allocation.
Clean appropriate list entry on release to avoid this.
Obtained from: Semihalf
Reviewed by: ian
Sponsored by: The FreeBSD Foundation
it, except Ethernet, where it carried ng_ether(4) pointer.
For now carry the pointer in if_l2com directly.
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
- Support the KDB alt break sequence to enter the debugger,
panic, reboot, etc. [1]
- Provide emergency write feature description. Note that QEMU
does not implement this feature.
- Make the VTCON_FLAG_* defines sequential once again.
- When the multiple port feature is not negotiated, query the
rows and columns of the one console during the device attach
when the size feature is negotiated.
- Report failure to the device if hot plugging a port fails.
- Acknowledge the console port event with an open event. This
is required by the spec, but QEMU doesn't seem to care.
Submitted by: Juniper [1]
MFC after: 1 month
-Improved VF stability, thanks to changes from Ryan Stone,
and Juniper.
- RSS fixes in the ixlv driver
- link detection in the ixlv driver
- New sysctl's added in ixl and ixlv
- reset timeout increased for ixlv
- stability fixes in detach
- correct media reporting
- Coverity warnings fixed
- Many small bug fixes
- VF Makefile modified - nvm shared code needed
- remove unused sleep channels in ixlv_sc struct
Submitted by: Eric Joyner (committed by jfv)
MFC after: 1 week
Therefore, to set histry size to 2000 lines, add the following line to
your kernel configuration file:
options SC_HISTORY_SIZE=2000
The default history remains at 500 lines.
MFC after: 1 week
some accumulated entropy twice and use that as the new key. Due to a
typo, we were using the output of the first hash round instead of the
second. Correct this, but eliminate temp[] since we can reuse hash[].
Also add comments explaining what is going on and why.
Noticed by: Sami Farin <sami.farin@gmail.com>
Reviewed by: markm@
Approved by: so (des)
on my part about north bridge/GPU pci ids and use of aperture.
Leave the agp_intel.c out of static compilation on amd64, it makes the
things consistent with agp.ko.
Pointed out by: tijl
Sponsored by: The FreeBSD Foundation
MFC after: 13 days
... and their associated tunables. This gives a way to know the list of
available connectors, no matter the driver.
The problem is that xrandr(1) can list connectors but it uses a
different naming.
MFC after: 1 week
875. This intersects with the agp_i810.c, which supports all Intels
from i810 to Core i5/7. Both agp_intel.c and agp_i810.c are compiled
into kernel when device agp is specified in config, and agp_i810
attach seems to be selected by chance due to linking order.
Strip support for 810 and later from agp_intel.c. Since 440-class
chipsets do not support any long-mode capable CPUs, remove agp_intel.c
from amd64 kernel file list. Note that agp_intel.c is not compiled
into agp.ko on amd64 already.
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
By default, vt(4) gets the "preferred mode" from DRM, when using a DRM
video driver as its backend. The preferred mode is usually the native
screen resolution.
Now, if this mode isn't appropriate, a user can use loader tunables to
select a mode. The tunables are read in the following order:
1. kern.vt.fb.modes.$connector_name
2. kern.vt.fb.default_mode
For example, to set a 1024x768 mode, no matter the connector:
kern.vt.fb.default_mode="1024x768"
To set a 800x600 mode only on the laptop builtin screen:
kern.vt.fb.modes.LVDS-1="800x600"
MFC after: 1 week
random_adaptors_lock is held.
- Use sx_sleep instead of tsleep in read and write path to allow
another thread that registers a new random adapter when waiting.
Assert that random_adaptor is not NULL after reacquiring the lock.
- Capture EINTR/ERESTART from sx_sleep to allow the blocking cycle be
stopped when user requests so, while there also make short
read/write's return 0.
- Move M_WAITOK allocations out of lock scope.
In collobration with: kib, markm, ian, jilles
Reviewed by: kib, markm
Approved by: so
The problem was that only the kbdmux keyboard index was saved in
vd->vd_keyboard. This index is -1 when kbdmux isn't used. In this
case, the keyboard was correctly allocated, but the returned index was
discarded.
PR: 194718
MFC after: 1 week
updating the GTT and flushing the AGP TLB by storing the GTT in
write-combining memory.
On x86 flushing the AGP TLB is done by an I/O operation or a store to a
MMIO register in uncacheable memory. Both cases imply that WC buffers are
flushed so no memory barriers are needed.
On powerpc there is no WC memory type. It maps to uncacheable memory and
two stores to uncacheable memory, such as to the GTT and then to an MMIO
register, are strongly ordered, so no memory barriers are needed either.
MFC after: 1 month
A new terminal_set_cursor() is added: it wraps the existing
teken_set_cursor() function.
In vtbuf_grow(), the cursor position is adjusted at the end of the
function. In vt_change_font(), we call terminal_set_cursor() just after
terminal_set_winsize_blank(), while the terminal is mute.
This fixes a bug where, after loading a kernel video driver which
increases the terminal window size, the cursor remains at its old
position, in other words, in the middle of the display content.
PR: 194421
MFC after: 1 week
hold the gpiobus lock between the gpio calls.
gpiobus_acquire_lock() now accepts a third parameter which tells gpiobus
what to do when the bus is already busy.
When GPIOBUS_WAIT wait is used, the calling thread will be put to sleep
until the bus became free.
With GPIOBUS_DONTWAIT the calling thread will receive EWOULDBLOCK right
away and then it can act upon.
This fixes the gpioiic(4) locking issues that arises when doing multiple
concurrent access on the bus.
This code has had an extensive rewrite and a good series of reviews, both by the author and other parties. This means a lot of code has been simplified. Pluggable structures for high-rate entropy generators are available, and it is most definitely not the case that /dev/random can be driven by only a hardware souce any more. This has been designed out of the device. Hardware sources are stirred into the CSPRNG (Yarrow, Fortuna) like any other entropy source. Pluggable modules may be written by third parties for additional sources.
The harvesting structures and consequently the locking have been simplified. Entropy harvesting is done in a more general way (the documentation for this will follow). There is some GREAT entropy to be had in the UMA allocator, but it is disabled for now as messing with that is likely to annoy many people.
The venerable (but effective) Yarrow algorithm, which is no longer supported by its authors now has an alternative, Fortuna. For now, Yarrow is retained as the default algorithm, but this may be changed using a kernel option. It is intended to make Fortuna the default algorithm for 11.0. Interested parties are encouraged to read ISBN 978-0-470-47424-2 "Cryptography Engineering" By Ferguson, Schneier and Kohno for Fortuna's gory details. Heck, read it anyway.
Many thanks to Arthur Mesh who did early grunt work, and who got caught in the crossfire rather more than he deserved to.
My thanks also to folks who helped me thresh this out on whiteboards and in the odd "Hallway track", or otherwise.
My Nomex pants are on. Let the feedback commence!
Reviewed by: trasz,des(partial),imp(partial?),rwatson(partial?)
Approved by: so(des)
in the radeonkms driver.
Note: In PCI mode virtual addresses on the graphics card that map to system
RAM are translated to physical addresses by the graphics card itself. In
AGP mode address translation is done by the AGP chipset so fictitious
addresses appear on the system bus. For the CPU cache management to work
correctly when the CPU accesses this memory it needs to use the same
fictitious addresses (and let the chipset translate them) instead of using
the physical addresses directly.
Reviewed by: kib
MFC after: 1 month
initial MPA exchange must be tracked this way so that t4_tom's state for
the tid is all clean at the time the tid transitions to RDMA mode. Once
it does, t4_tom is out of the way and iw_cxgbe uses the qp endpoints
directly.
Sponsored by: Chelsio Communications
directly accessed. Although this will work on some platforms, it can
throw an exception if the pointer is invalid and then panic the kernel.
Add a missing SYSCTL_IN() of "SCTP_BASE_STATS" structure.
MFC after: 3 days
Sponsored by: Mellanox Technologies
- Free rt in c4iw_connect only if it is allocated.
- Call soclose instead of so_shutdown if there is an abort from the peer.
- Close socket and return failure if TOE is not enabled.
Submitted by: Hariprasad at Chelsio dot com
Sponsored by: Chelsio Communications
transfers to be default. It simplifies porting code which assumes
such settings.
Discussed with: avg, llos, nwhitehorn
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
It had two bugs: one where mmap was still allowed and another where
D_TRACKCLOSE doesn't handle all cases.
Thanks to jhb and kib for pointing them out.
MFC after: 1 week
