We should have nextboot feature implemented in libsa zfs code.
To get there, I have created zfs_nextboot() implementation based on
two sources, our current simple textual string based approach with added
structured boot label PAD structure from OpenZFS.
Secondly, all nvlist details are moved to separate source file and
restructured a bit. This is done to provide base support to add nvlist
add/update feature in followup updates.
And finally, the zfsboot/gptzfsboot disk access functions are swapped to use
libi386 and libsa.
Sponsored by: Netflix, Klara Inc.
Differential Revision: https://reviews.freebsd.org/D25324
we have crc32(const void *, size_t) in libsa. Unfortunately zlib has
crc32(long, const unigned char *, unsigned) and we have conflict.
Since we do build libsa with zlib, we can use zlib version instead.
Reviewed by: allanjude
Differential Revision: https://reviews.freebsd.org/D24068
The vectx API, computes the hash for verifying a file as it is read.
This avoids the overhead of reading files twice - once to verify, then
again to load.
For doing an install via loader, avoiding the need to rewind
large files is critical.
This API is only used for modules, kernel and mdimage as these are the
biggest files read by the loader.
The reduction in boot time depends on how expensive the I/O is
on any given platform. On a fast VM we see 6% improvement.
For install via loader the first file to be verified is likely to be the
kernel, so some of the prep work (finding manifest etc) done by
verify_file() needs to be factored so it can be reused for
vectx_open().
For missing or unrecognized fingerprint entries, we fail
in vectx_open() unless verifying is disabled.
Otherwise fingerprint check happens in vectx_close() and
since this API is only used for files which must be verified
(VE_MUST) we panic if we get an incorrect hash.
Reviewed by: imp,tsoome
MFC after: 1 week
Sponsored by: Juniper Networks
Differential Revision: https://reviews.freebsd.org//D23827
FreeBSDlua ("flua") is a FreeBSD-private lua, flavored with whatever
extensions we need for base system operations. We currently support a subset
of lfs and lposix that are used in the rewrite of makesyscall.sh into lua,
added in r354786.
flua is intentionally written such that one can install standard lua and
some set of lua modules from ports and achieve the same effect.
linit_flua is a copy of linit.c from contrib/lua with lfs and lposix added
in. This is similar to what we do in stand/. linit.c has been renamed to
make it clear that this has flua-specific bits.
luaconf has been slightly obfuscated to make extensions more difficult. Part
of the problem is that flua is already hard enough to use as a bootstrap
tool because it's not in PATH- attempting to do extension loading would
require a special bootstrap version of flua with paths changed to protect
the innocent.
src.lua.mk has been added to make it easy for in-tree stuff to find flua,
whether it's bootstrap-flua or relying on PATH frobbing by Makefile.inc1.
Reviewed by: brooks, emaste (both earlier version), imp
Differential Revision: https://reviews.freebsd.org/D21893
Multiple places coordinate to 'know' where lua scripts are installed. Knock
this down to being formally defined (and overridable) in exactly one spot,
defs.mk, and spread the knowledge to loaders and liblua alike. A future
commit will expose this to lua as loader.lua_path, so it can build absolute
paths to lua scripts as needed.
MFC after: 1 week
NANDFS has been broken for years. Remove it. The NAND drivers that
remain are for ancient parts that are no longer relevant. They are
polled, have terrible performance and just for ancient arm
hardware. NAND parts have evolved significantly from this early work
and little to none of it would be relevant should someone need to
update to support raw nand. This code has been off by default for
years and has violated the vnode protocol leading to panics since it
was committed.
Numerous posts to arch@ and other locations have found no actual users
for this software.
Relnotes: Yes
No Objection From: arch@
Differential Revision: https://reviews.freebsd.org/D20745
illumos update: https://www.illumos.org/issues/10598
Add map-vdisk and unmap-vdisk commands to create virtual disk interface on top of file. This will allow to use disk image from file system to load and start the kernel.
By mapping file, we create vdiskX device, the device will be listed by lsdev [-v] and can be accessed directly as ls vdisk0p1:/path or can be used as value for currdev variable.
vdisk strategy function does not use bcache as we have bcache used with backing file. vdisk can be unmapped when all consumers have closed the open files.
In first iteration we do not support the zfs images because zfs pools do keep the device open (there is no "zpool export" mechanism). Adding zfs support is relatively simple, we just need to run zfs disk probe after mapping is done.
Differential Revision: https://reviews.freebsd.org/D19733
The current approach of injecting manifest into mac_veriexec is to
verify the integrity of it in userspace (veriexec (8)) and pass its
entries into kernel using a char device (/dev/veriexec).
This requires verifying root partition integrity in loader,
for example by using memory disk and checking its hash.
Otherwise if rootfs is compromised an attacker could inject their own data.
This patch introduces an option to parse manifest in kernel based on envs.
The loader sets manifest path and digest.
EVENTHANDLER is used to launch the module right after the rootfs is mounted.
It has to be done this way, since one might want to verify integrity of the init file.
This means that manifest is required to be present on the root partition.
Note that the envs have to be set right before boot to make sure that no one can spoof them.
Submitted by: Kornel Duleba <mindal@semihalf.com>
Reviewed by: sjg
Obtained from: Semihalf
Sponsored by: Stormshield
Differential Revision: https://reviews.freebsd.org/D19281
This relies on libbearssl and libsecureboot
to verify files read by loader in a maner equivalent
to how mac_veriexec
Note: disabled by default.
Use is initially expected to be by embeded vendors
Reviewed by: emaste, imp
Sponsored by: Juniper Networks
Differential Revision: D16336
Create loader_{4th,lua,simp}{,.efi}. All of these are installed by
default. Create LOADER_DEFAULT_INTERP to specify the default
interpreter when no other is specified. LOADER_INTERP is the current
interpreter language building. Turn building of lua on by default to
match 4th. simploader is a simplified loader build w/o any interpreter
language (but with a simple loader). This is the historic behavir you
got with WITHOUT_FORTH. Make a hard link to the default loader. This
has to be a hard link rather than the more desirable soft link because
older zfsboot blocks don't support symlinks.
RelNotes: Yes
Differential Revision: https://reviews.freebsd.org/D16705
We no longer really need a separate zfsloader. It was useful when we
were first supporting ZFS and had limited ability to properly boot off
of ZFS without the special boot loader. Now that the boot loader has
matured, go the way loader.efi pioneered and just build one
binary. Change the name of the loader to load in the secondary boot
blocks to be just /boot/loader. Provide a symbolic link from zfsloader
to loader so people who have not upgraded their boot blocks are not
affected. This has the happy benefit of making coexistence easier as
well (fewer binaries in the matrix).
Discussed with: allanjude@, kevans@
RelNotes: Yes
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D16361
Move the libzfs stuff into libsa. There's no need for it to be a
separate library. The separate library adds to the issues of build
ordering that we see from time to time. Move the filesystem support
into libsa, like all the other filesystem support rather than making
zfs the odd-duck out.
Discussed with: allanjude@
There's no reason to have multiple copies of lszfs and
reloadbe. Consolidate them into one location. Also ldi_get_size is the
same everywhere (except sparc64). Make it the same everywhere as the
common definition is more general and will work on spar64.
Summary:
All metadata.c files are very similar, with only trivial changes. Unify them
into a single common file, with minor special-casing where needed.
Reviewed By: imp
Differential Revision: https://reviews.freebsd.org/D13978
liblua glues the lua run time into the boot loader. It implements all
the runtime routines that lua expects. In addition, it has a few
standard 'C' headers that nueter various aspects of the LUA build that
are too specific to lua to be in libsa. Many refinements from the
original code to improve implementation and the number of included lua
libraries. Use int64_t for lua_Number. Have "/boot/lua" be the default
module path. Numerous cleanups from the original GSoC project,
including hacking libsa to allow lua to be built with only one change
outside luaconf.h.
Add the final bit of lua glue to bring in liblua and plug into the
multiple interpreter framework, previously committed.
Add LOADER_LUA option, currently off by default.
Presently, this is an experimental option. One must opt-in to using
this by defining WITH_LOADER_LUA and WITHOUT_FORTH. It's been
lightly tested, so keep a backup copy of your old loader handy.
The menu code, coming in the next commit, hasn't been exhaustively
tested. A LUA boot loader is 60k larger than a FORTH one, which is
80k larger than a no-interpreter one. Subtle changes in size
may tip things past some subtle limit (the binary is ~430k now
when built with LUA). A future version may offer coexistance.
Bump FreeBSD version to 1200058 to mark the milestone.
Pedro Souza's 2014 Summer of Code project. Rui Paulo, Pedro Arthur,
Zakary Nafziger and Wojciech A. Koszek also contributed. Warner Losh
reworked it extensively into its current form.
Obtained from: https://wiki.freebsd.org/SummerOfCode2014/LuaLoader
Sponsored by: Google Summer of Code
Relnotes: Yes
MFC After: 1 month
Differential Review: https://reviews.freebsd.org/D14295
preference to LIBFICL{,32}. LIBFICL{,32} are now always defined, but
LDR_INTERP{,32} is defined empty when building w/o forth (aka the
simple interpreter) and defined to LIBFICL{,32} when we are building
forth.
akin to what Pedro Souza and Wojciech Koszek did in the lua GSoC with
interp.h, interp_simple.c and changes to interp.c and interp_forth.c,
but completely redone from scratch.
This effectively restores the spirit of r326712 (my first attempt to
bring in Pedro's and Wojciech's work) updated for new requirements
that had silently broke their original work. This change also differs
by using fixed function names instead of function pointers to simply
things. Only one interpreter at a time may be compiled in.
Also of note: we take a mutable string, pass it in via a const char *
pointer into intrp_forth's interp_run(). We then cast away the const
to pass into ficlExec since ficl would require extensive changes to
properly const-poison. See Sections 6.5.2.5 and 6.7.3 of C11 standard
noting it's only UB if you modify a const object through a non-const
pointer, but not char [] -> const char * -> char * as here.
loader, but not compile as loader (it's building a library), so we
can't just include loader.mk for the defines. Move LOADER_DISK_SUPPORT
back to defs.mk for the moment.
Sponsored by: Netflix
HELP_FILES is a loader only thing, so move it to loader.mk. Only
generate the help file if HELP_FILES is defined. Adjust Makefiles to
new convention. Fix a few cases where ${.CURDIR}/ was missing
resulting in missing bits from the help files.
Sponsored by: Netflix
Create an interp class. Use it to separate out the different types of
interpreters: forth and simple with function pointers rather than
via #ifdefs.
Obtained from: lua boot loader project
(via https://bsdimp@github.com/bsdimp/freebsd.git lua-bootloader)
Sponsored by: Netflix