filesystem. This avoids confusion with nullfs and unionfs filesystems
which reference the root of a UFS filesystem as a target.
PR: 116849
Approved by: kib
Either use parameters provided by user or make them up.
The code for faking CHS params is borrowed from disklabel code.
The logic for using user-provided and auto-guessed parameters is not
perfect, so to speak.
PR: bin/121182
Approved by: jhb (mentor)
that selects a callback from an interface prefix name. This allows us to
report a meaningful error when the user types 'ifconfig wlan0 create',
for example, and also kills some redundant code.
Reviewed by: sam (earlier version)
distinguish between a typo in the mode name and that the device does not
support a certain mode (till now both causes show the same result, i.e. the old
mode is displayed).
Submitted by: Christoph Mallon <christoph.mallon gmx.de>
Approved by: kib (mentor)
channel modes:
o usurp 'h' mode flag for half-width channels
o add 'q' mode flag for quarter-width channels
o rewrite rate parameter parsing to handle fractional values
o merge mode loops to eliminate ordering assumptions
o replace 0x80 with IEEE80211_RATE_MCS
attributes. The start and end more accurately describe the
space taken by a partition. The offset and size are used to
describe the effective (usable) storage of that partition.
o add missing channel flags for ECM, indoor, and outdoor constraints
o use HT capabilities to short-circuit HT20/HT40 channel construction
o rewrite 1/2 and 1/4 width channel handling yet again; previously
we assumed there was a full-width version of the channel in the
calibration table but that's not always true (e.g. for the Public
Safety Band), now we first check the calibration table for the
exact channel we want then fall back to the heuristics we used before
o fix HT channel construction; wasn't adjusting band edges for HT40
channel bandwidth requirements
in fallback_mount() function.
Add a comment to indicate that the fallback_mount() function
should eventually go away.
Submitted by: Jaakko Heinonen <jh saunalahti fi>
robust. With these changes fsck is now able to detect and reliably
rebuild corrupted cylinder group maps. The -D option is no longer
necessary as it has been replaced by a prompt asking whether the
corrupted cylinder group should be rebuilt and doing so when requested.
These actions are only offered and taken when running fsck in manual
mode. Corrupted cylinder groups found during preen mode cause the fsck
to fail.
Add the -r option to free up excess unused inodes. Decreasing the
number of preallocated inodes reduces the running time of future
runs of fsck and frees up space that can allocated to files. The -r
option is ignored when running in preen mode.
Reviewed by: Xin LI <delphij@>
Sponsored by: Rsync.net
modify the pointer argument passed to it. This triggered an assert in malloc
when a geom command being run under the livefs environment.
PR: bin/130632
Submitted by: Dimitry Andric <dimitry -at- andric.com>
Pointy hat to: me
MFC after: 2 days
things, 1/2 and 1/4 width channels are hidden behind the full width
channel; this is needed because they are ordered such that they
appear after in the channel table
o only include 1/2 and 1/4 width channels when they are specified in the
regulatory database description; previously we treated them as if they
were part of the band and blindly added them for 11a/g
o check the channel list returned in the devcaps to identify whether a
device supports 1/2 or 1/4 width channels on a band; this might be
better brought out as a capability bit to avoid filling the channel
list w/ 1/2 and 1/4 width channels but then cards that only support
these channels in a range of frequencies could not be described (though
right now we don't check frequency range only band)
fragments in the file system by fragment (block) number. This new
mode does the necessary arithmetic to generate absolute fragment
numbers rather than than the cg-relative numbers printed in the default
mode.
If -f is passed once, contiguous fragment ranges are collapsed into
an X-Y format as free block lists are currently printed in regular
dumpfs output, but if specified twice, all block numbers are printed
individually, allowing both compact and more script-friendly
representation.
This proves quite handy when attempting to recover deleted data, as it
allows exclusion of non-deleted data from blocks searched.
MFC after: 1 week
Discussed with: jeff, Richard Clayton <richard dot clayton at cl.cam.ac.uk>
Sponsored by: Google, Inc.
o change ioctl's that pass channel lists in/out to handle variable-size
arrays instead of a fixed (compile-time) value; we do this in a way
that maintains binary compatibility
o change ifconfig so all channel list data structures are now allocated
to hold MAXCHAN entries (1536); this, for example, allows the kernel
to return > IEEE80211_CHAN_MAX entries for calls like IEEE80211_IOC_DEVCAPS
Usual moving of code with no changes from ipfw2.c to the
newly created files, and addition of prototypes to ipfw2.h
I have added forward declarations for ipfw_insn_* in ipfw2.h
to avoid a global dependency on ip_fw.h
In this episode:
- introduce a common header with a minimal set of common definitions;
- bring the main() function and options parser in main.c
- rename the main functions with an ipfw_ prefix
No code changes except for the introduction of a global variable,
resvd_set_number, which stores the RESVD_SET value from ip_fw.h
and is used to remove the dependency of main.c from ip_fw.h
(and the subtree of dependencies) for just a single constant.
program name, and ignore that entry. ipfw2.c code instead skips
this entry and starts with options at offset 0, relying on a more
tolerant implementation of the library.
This change fixes the issue by always passing a program name
in the first entry to getopt. The motivation for this change
is to remove a potential compatibility issue should we use
a different getopt() implementation in the future.
No functional changes.
Submitted by: Marta Carbone (parts)
MFC after: 4 weeks
There are still several signed/unsigned warnings left, which
require a bit more study for a proper fix.
This file has grown beyond reasonable limits.
We really need to split it into separate components (ipv4, ipv6,
dummynet, nat, table, userland-kernel communication ...) so we can
make mainteinance easier.
MFC after: 1 weeks
very well maintained and point user to sysutils/fusefs-ntfs, which
at the time of this writing seems to be a better alternative.
Suggested by: luigi
MFC after: 2 weeks
o correct typo that caused random channel selection
o explicitly add 1/2 and 1/4 width channels because channel lookups match
flags that include IEEE80211_CHANNEL_HALF and IEEE80211_CHANNEL_QUARTER
replace the table of partition with a simpler and faster array of strings.
The change in the array is done mechanically, using vi commands.
Most entries in the table are probably 15+ years old and largely outdated,
so the next step is to remove stale entries with more current values.
Submitted by: Christoph Mallon, with small changes from me
MFC after: 3 days
+ Remove a dead field of a struct. It serves no purpose anymore.
+ Remove a \n at the end of the format string of err(); the err()
function already adds a \n ;
+ remove many unnecessary casts which obfuscate the code.
This file has a huge number of indentation bugs, but I'd rather fix
them when/if we happen to modify the relevant parts of the code.
Submitted by: Christoph Mallon
MFC after: 3 days
o add net80211 support for a tdma vap that is built on top of the
existing adhoc-demo support
o add tdma scheduling of frame transmission to the ath driver; it's
conceivable other devices might be capable of this too in which case
they can make use of the 802.11 protocol additions etc.
o add minor bits to user tools that need to know: ifconfig to setup and
configure, new statistics in athstats, and new debug mask bits
While the architecture can support >2 slots in a TDMA BSS the current
design is intended (and tested) for only 2 slots.
Sponsored by: Intel
recent demonstration of a forged SSL certificate. Add text pointing out
that SHA-1 is at least theoretically broken. Add a recommendation that
new applications use SHA-256.
MFC after: 1 month
* Better wording of sections dealing with physical storage
* A new section on assumptions gvirstor has on its consumer devices
(components) and its interaction with file systems
* Improved markup (by hrs@)
Reviewed by: hrs
Approved by: gnn (mentor)
1. separating L2 tables (ARP, NDP) from the L3 routing tables
2. removing as much locking dependencies among these layers as
possible to allow for some parallelism in the search operations
3. simplify the logic in the routing code,
The most notable end result is the obsolescent of the route
cloning (RTF_CLONING) concept, which translated into code reduction
in both IPv4 ARP and IPv6 NDP related modules, and size reduction in
struct rtentry{}. The change in design obsoletes the semantics of
RTF_CLONING, RTF_WASCLONE and RTF_LLINFO routing flags. The userland
applications such as "arp" and "ndp" have been modified to reflect
those changes. The output from "netstat -r" shows only the routing
entries.
Quite a few developers have contributed to this project in the
past: Glebius Smirnoff, Luigi Rizzo, Alessandro Cerri, and
Andre Oppermann. And most recently:
- Kip Macy revised the locking code completely, thus completing
the last piece of the puzzle, Kip has also been conducting
active functional testing
- Sam Leffler has helped me improving/refactoring the code, and
provided valuable reviews
- Julian Elischer setup the perforce tree for me and has helped
me maintaining that branch before the svn conversion
when the CC is not set. Note NO_COUNTRY is set to 0xffff for now
(must be 16 bits as ieee80211_regdomain struct defines sku's and
cc's as uint16_t which may need fixing).
o do not require 1/2 and 1/4 rate channels be present in the
calibration list when doing a gsm regulatory change; the
existing 900MHz cards are not self-identifying so there is
no way (using the calibration channel list) to check
o store XML_Parser in the state block so we can report line numbers for errors
o complain about netband w/o mode
o complain about unknown modes
o complain about band w/o enclosing netband
o complain about duplicate freqband
o complain about unknown channel flags
o complain about band w/o freqband's
o complain about band w/o maxpower
o complain about country w/o ISO cc
o complain about country w/o regdomain reference
might do subsequent reads from other providers. This stopped geli (and
probably other classes using g_metadata_store as well) from being put on top
of gvinum raid5 volumes.
Note:
The reason it fails in the gvinum raid5 case is that gvinum will read back the
old parity stripe before calculating the new parity stripe to be written out
again. The write will then fail because the underlying disk to be read is
opened write only.
MFC after: 1 week
it was before -- the check is only made when getdisklabel()
returns valid info.
On passing, use MAXPARTITIONS to identify the max partition number,
instead of the hardwired 'h'
MFC after: 4 weeks
want to prepare disk images for emulators (though 'makefs' in port
can do something similar).
This relies on:
+ minor changes to pass the consistency checks even when working on a file;
+ an additional option, '-p partition' , to specify the disk partition to
initialize;
+ some changes on the I/O routines to deal with partition offsets.
The latter was a bit tricky to implement, see the details in newfs.h:
in newfs, I/O is done through libufs which assumes that the file
descriptor refers to the whole partition. Introducing support for
the offset in libufs would require a non-backward compatible change
in the library, to be dealt with a version bump or with symbol
versioning.
I felt both approaches to be overkill for this specific application,
especially because there might be other changes to libufs that might
become necessary in the near future.
So I used the following trick:
- read access is always done by calling bread() directly, so we just add
the offset in the (few) places that call bread();
- write access is done through bwrite() and sbwrite(), which in turn
calls bwrite(). To avoid rewriting sbwrite(), we supply our own version
of bwrite() here, which takes precedence over the version in libufs.
MFC after: 4 weeks
when preparing images for emulators or flash devices:
+ option '-C size' to create the underlying image file with given size.
Saves doing a 'dd' before, and especially it creates a sparse file
+ option '-@ offset' to build the FAT image at the specified offset
in the image file or device;
+ make the cluster size adaptive on the filesystem size.
Previously the default was 4k which is really unconvenient with
large media; now it goes from 512 bytes to 32k depending on
filesystem size (i still need to check whether it makes sense
to go further up, to 64k or above);
+ fix default geometry when not specified on the command line,
use 63 sectors/255 heads by default.
Also trim the size so it exactly a multiple of a track, to avoid
complaints in some filesystem code.
+ document all the above, plus some manual page clarifications.
MFC after: 4 weeks
mount_msdosfs: /dev/cf0s1: : Operation not supported by device
and thought I'd fix it to be:
mount_msdosfs: /dev/cf0s1: Operation not supported by device
Not sure why errmsg isn't getting filled in, or why this error is even
happening at all... (fsck_msdosfs is clean, and I can mount this same
CF elsewhere).
a plain file and a geometry is not explicitly supplied through
command line or disktab entry.
This way you can a FAT image on a file as simply as this:
newfs_msdos ./some/file
(right now you need a much longer command
newfs_msdos -h 32 -u 64 -S 512 -s $total_blocks -o 0 ./some/file
Will be merged after 7.1 and 6.4 are released.
See also the related PR which suggests a similar change.
PR: bin/121182
MFC after: 4 weeks
many bugs fixes, many more performance improvements.
Submitted by: Danny Braniss
M sbin/iscontrol/iscsi.conf.5
M sbin/iscontrol/iscontrol.8
M sbin/iscontrol/iscontrol.h
M sbin/iscontrol/config.c
M sbin/iscontrol/fsm.c
M sbin/iscontrol/login.c
M sbin/iscontrol/pdu.c
M sbin/iscontrol/misc.c
M sbin/iscontrol/auth_subr.c
M sbin/iscontrol/iscontrol.c
M sys/dev/iscsi/initiator/isc_cam.c
M sys/dev/iscsi/initiator/iscsi.h
M sys/dev/iscsi/initiator/isc_soc.c
M sys/dev/iscsi/initiator/iscsi_subr.c
M sys/dev/iscsi/initiator/iscsivar.h
M sys/dev/iscsi/initiator/isc_subr.c
M sys/dev/iscsi/initiator/iscsi.c
M sys/dev/iscsi/initiator/isc_sm.c
formatting a number in a human-friendly way.
Note that with this commit a megabyte changed from 1000000 to
1048576 and a 80G disk is now printed as being 75G in size.
This is deliberate. It's consistent with the core of geom(8).
However, the original choice for a megabyte being 1000000 was
on purpose and matches what disk vendors put on the box. The
consistency is considered more important.
Submitted by: delphij
and server. This replaces the RPC implementation of the NFS client and
server with the newer RPC implementation originally developed
(actually ported from the userland sunrpc code) to support the NFS
Lock Manager. I have tested this code extensively and I believe it is
stable and that performance is at least equal to the legacy RPC
implementation.
The NFS code currently contains support for both the new RPC
implementation and the older legacy implementation inherited from the
original NFS codebase. The default is to use the new implementation -
add the NFS_LEGACYRPC option to fall back to the old code. When I
merge this support back to RELENG_7, I will probably change this so
that users have to 'opt in' to get the new code.
To use RPCSEC_GSS on either client or server, you must build a kernel
which includes the KGSSAPI option and the crypto device. On the
userland side, you must build at least a new libc, mountd, mount_nfs
and gssd. You must install new versions of /etc/rc.d/gssd and
/etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf.
As long as gssd is running, you should be able to mount an NFS
filesystem from a server that requires RPCSEC_GSS authentication. The
mount itself can happen without any kerberos credentials but all
access to the filesystem will be denied unless the accessing user has
a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There
is currently no support for situations where the ticket file is in a
different place, such as when the user logged in via SSH and has
delegated credentials from that login. This restriction is also
present in Solaris and Linux. In theory, we could improve this in
future, possibly using Brooks Davis' implementation of variant
symlinks.
Supporting RPCSEC_GSS on a server is nearly as simple. You must create
service creds for the server in the form 'nfs/<fqdn>@<REALM>' and
install them in /etc/krb5.keytab. The standard heimdal utility ktutil
makes this fairly easy. After the service creds have been created, you
can add a '-sec=krb5' option to /etc/exports and restart both mountd
and nfsd.
The only other difference an administrator should notice is that nfsd
doesn't fork to create service threads any more. In normal operation,
there will be two nfsd processes, one in userland waiting for TCP
connections and one in the kernel handling requests. The latter
process will create as many kthreads as required - these should be
visible via 'top -H'. The code has some support for varying the number
of service threads according to load but initially at least, nfsd uses
a fixed number of threads according to the value supplied to its '-n'
option.
Sponsored by: Isilon Systems
MFC after: 1 month
background fsck on the same file system might then print negative
numbers for reclaimed directories/files/fragments.
Address the issue in a limited degree, by using old summary data for
cg when bgfsck is performed.
Submitted by: tegge
MFC after: 1 week
systems less than 1 TB, due to using 32-bits integers for file system block
numbers. This also causes incorrect error reporting for foreground fsck.
Convert it to use ufs2_daddr_t for block numbers.
PR: kern/127951
Submitted by: tegge
MFC after: 1 week
all others. Use this to disambiguate cmd line arguments that can
be either clone params or regular parameters so, in particular,
"bssid" again works as a regular parameter.
While here leverage the above to improve the logic for flushing
clone operations on the first !clone cmd line parameter.
Reviewed by: jhay
control over the result of buildworld and installworld; this especially
helps packaging systems such as nanobsd
Reviewed by: various (posted to arch)
MFC after: 1 month
size and the sector size.
- Fix a bug where bsdlabel would try to read a regular file using the geom_bsd
class.
Quick review by: phk
Approved by: pjd (mentor)
via nmount(), build up an iovec where each iovec member is an NFS mount
option, and pass the iovec down to the kernel via nmount(). These options
are then parsed in the kernel.
This should make it easier to add new NFS mount options in future.
Many, many thanks to Doug Rabson for taking my initial patches,
and cleaning them up. In addition, Doug added a fallback_mount()
function so that the newer mount_nfs program will work against older
kernels, to facilitate upgrading/downgrading scenarios.
Doug also re-wrote the mount_nfs.8 man page.
Reviewed by: dfr
duplication of code in fdisk and boot0cfg. Also make use of g_providername to
fix an issue with fdisk and boot0cfg not using the correct provider when
writing the MBR.
Reviewed by: phk
Approved by: pjd (mentor)
once it is lost, all data is gone.
Option '-B none' can by used to prevent backup. Option '-B path' can be
used to backup metadata to a different file than the default, which is
/var/backups/<prov>.eli.
The 'geli init' command also prints backup file location and gives short
procedure how to restore metadata.
The 'geli setkey' command now warns that even after passphrase change or keys
update there could be version of the master key encrypted with old
keys/passphrase in the backup file.
Add regression tests to verify that new functionality works as expected.
Update other regression tests so they don't create backup files.
Reviewed by: keramida, rink
Dedicated to: a friend who lost 400GB of his live by accidentally overwritting geli metadata
MFC after: 2 weeks
ping(8)'s -a was mapped to -e, but -E was already taken in ping6 (old
option) so rename -e to -r.
Now:
ping -a => ping6 -r
ping -A => ping6 -R
MFC after: 2 days
userspace to kernel via nmount(), pass in the strings
"update", "snapshot", "reload".
We want to move away from passing MNT_ flags from userspace -> kernel
via nmount(), and instead favor passing the string options.
IP_MULTICAST_IF with struct ip_mreqn (obtained from Linux) to tell the
stack which interface index to use for sending IPv4 datagrams.
Submitted by: bms
Tested by: phk
obsoleted by gpart(8). This avoids the following bugs in fdisk:
- initializing a disk without MBR bogusly emits the error:
fdisk: invalid fdisk partition table found
- initializing a disk with or without MBR bogusly emits either:
fdisk: Class not found
or
fdisk: Geom not found: "XXX"
- the default geometry for non-ATA and non-SCSI disks is either
invalid or sub-optimizal.
RELEASE_CRUNCH builds use NO_MAN anyway, so this change is primarily
to avoid that developers have to set NO_MAN manually when they build
the static variant.
In the MPSAFE TTY branch, I noticed PTY's to be leaked, because
dhclient's privileged process was run inside the session of, say, the
login shell. Make sure we call setsid() here.
Approved by: philip (mentor), brooks
return a pointer to a void. The send_thread() and disk_thread()
funtions; however, do not have a return value because they run for
the duration of the daemon's lifetime. This causes gcc to barf when
running with -O3. Make these functions return a null pointer to quiet it.
PR: bin/124342
Submitted by: Garrett Cooper <gcooper@FreeBSD.org> (minus his comments)
MFC after: 1 week
others. In the case where it displayed warnings it would still return
succesfully. Modify it so that it returns the number of sysctls that
it was not able to set.
Make use of this in rc.d to display only *unsuccessfull* attempts to
set sysctls.
