Here are the diffs for libc_r to get it one step closer to P1003.1c
These make most of the thread/mutex/condvar structures opaque to the
user. There are three functions which have been renamed with _np
suffixes because they are extensions to P1003.1c (I did them for JAVA,
which needs to suspend/resume threads and also start threads suspended).
I've created a new header (pthread_np.h) for the non-POSIX stuff.
The egrep tags stuff in /usr/src/lib/libc_r/Makefile that I uncommented
doesn't work. I think its best to delete it. I don't think libc_r needs
tags anyway, 'cause most of the source is in libc which does have tags.
also:
Here's the first batch of man pages for the thread functions.
The diff to /usr/src/lib/libc_r/Makefile removes some stuff that was
inherited from /usr/src/lib/libc/Makefile that should only be done with
libc.
also:
I should have sent this diff with the pthread(3) man page.
It allows people to type
make -DWANT_LIBC_R world
to get libc_r built with the rest of the world. I put this in the
pthread(3) man page. The default is still not to build libc_r.
also:
The diff attached adds a pthread(3) man page to /usr/src/share/man/man3.
The idea is that without libc_r installed, this man page will give people
enough info to know that they have to build libc_r.
refilled) a file that was either line- or un-buffered, all files were
flushed. According to the code comment, the flush (according to ANSI)
is supposed to happen on write + line buffered output files, not _all_
files.
Obtained from: OpenBSD / Theo de Raadt, possibly from proven@cygnus.com
set sin_len
close one ftp port bounce attack
have rresvport() use bindresvport() rather than duplicate the code,
rresvport() is a superset of bindresvport().
Obtained from: OpenBSD / Jason Downs / Theo de Raadt, minor tweaks by me.
this man page to prevent half of it from coming out with underlines.
This man page needs to be gone over to fully convert it to mdoc format.
This closes PR#1440.
Submitted by: Jens Schweikhardt <schweikhardt@rus.uni-stuttgart.de>
- buffer expansions were not working right due to a return code botch.
- signed types instead of size_t's meant somebody else went and put
casts in, I've changed the types to what they should have been.
part that does zic(8)/zdump(8) is still yet to be imported (but the old
zic and zdump will work just fine with these header files and the
data format has not changed).
directly in order to obtain binding information, check that the local
ypbind is using a reserved port and return YPERR_YPBIND if it isn't.
We should not trust any ypbind running on a port >= IPPORT_RESERVED;
it may have been started by a malicious user hoping to trick us into
talking to a bogus ypserv.
Note that we do not check the ypserv port returned to us from ypbind.
It is assumed that ypbind has already done a reserved port test (or not,
depending on whether or not it was started with -s); if we trust the
authenticity of the local ypbind, we should also trust its judgement.
Obtained from: OpenBSD
aren't silently converted to minbrk. This stops malloc(INT_MAX) from
dumping core. Small values are still silently converted. They should
be an error. sbrk() doesn't do any range checking or conversions or
overflow checking.
Moved PIC_EPILOGUE invocation to a more natural place where it
obviously doesn't interfere with the comparison.
Document the fact that the tracefile argument must lead to a regular file.
Also took the opportunity to remove the spurious "Errors" entry
relating to filenames with the high-order bit set and add $Id$.
(More of the same to follow if there are no objections).
Added $Id$'s to files that were lacking them (gpalmer), made some
cosmetic changes to conform to style guidelines (bde) and checked
against NetBSD and Lite2 to remove unnecessary divergences (hsu, bde)
One last code cleanup:-
Removed spurious casts in fseek.c and stdio.c.
Added missing function argument in fwalk.c.
Added missing header include in flags.c and rget.c.
Put in casts where int's were being passed as size_t's.
Put in missing prototypes for static functions.
Changed second args of __sflags() inflags.c and writehook() in vasprintf.c
from char * to const char * to conform to prototypes.
This directory now compiles with no warnings with -Wall under
gcc-2.6.3 and with considerably less warnings than before with the
ultra-pedantic script I used for testing. (Most of the remaining ones
are due to const poisoning).
The usual stuff, adding missing function prototypes, argument types,
return values, etc.
This directory now compiles with no warnings with -Wall on gcc2.6.3!
The usual stuff, adding missing function prototypes, argument types,
return values, etc. In mktemp.c, convert pid from u_int to pid_t, and
get rid of "extern int errno".
Fixed a couple of nitpick warnings, plus one that slipped through the
net earlier.
This directory now compiles without any warnings with -Wall! (Until
the next gcc upgrade...)
1. Added missing function prototypes.
2. Added missing function return types.
3. Added missing function argument types.
4. Added missing headers for system function prototypes.
5. Corrected format specifier in printf().
6. Added extra parentheses around assignment used as truth value.
7. Added missing "default" cases in switch statements.
8. Added casts for function pointers.
9. Did *not* change int declarations of uid and gid to uid_t/gid_t
because I don't know if that would affect the protocol. Put in
explicit casts to int instead, to make things more obvious.
10. Moved declarations of variables that are only used if YP is
defined inside the '#ifdef YP' conditionals.
1. Added missing function prototypes.
2. Added missing function return types.
3. Added missing function argument types.
4. Added missing headers for system function prototypes.
5. Corrected casts in select() args.
6. Got rid of more "extern int errno" rubbish.
7. Added extra parentheses around assignment used as truth value.
8. Fixed bug in clnt_{tcp, udp}create() where pointers could be free'd
even if they hadn't been successfully malloc()'d.
1. Added missing function prototypes.
2. Added missing function return types.
3. Added missing function argument types.
4. Added missing headers for system function prototypes.
5. Got rid of "extern int errno" rubbish.
by W.Richard Ste vens. EINTR handling suggested by bde@freebsd.org).
Code cleanup:
1. Add missing return type.
2. Replace 'union wait' by int.
3. Use Posix-style signal handling instead of signal().
4. Use fork() instead of deprecated vfork().
5. Block signals before fork()'ing, instead of after.
6. Return -1 if fork() fails, instead of 0.
7. Add EINTR handling for waitpid() call.
Also add claim of Posix conformance to man page.
Now that we preserve RPC handles instead of rebuilding them each time
a ypcln function is called, we have to be careful about keeping our sockets
in a sane state. It's possible that the caller may call a ypclnt
function, and then decide to close all its file descriptors. This would
also close the socket descriptor held by the yplib code. Worse, it
could re-open the same descriptor number for its own use. If it then calls
another ypclnt function, the subsequent RPC will fail because the socket
will either be gone or replaced with Something Completely Different. The
yplib code will recover by rebinding, but it doing so it may wreck the
descriptor which now belongs to the caller.
To fix this, _yp_dobind() needs to label the descriptor somehow so
that it can test it later to make sure it hasn't been altered between
ypclnt calls. It does this by binding the socket, thus associating a port
number with it. It then saves this port number in the dom_local_port member
of the dom_binding structure for the given domain. When _yp_dobind() is
called again (which it is at the start of each ypclnt function), it checks
to see if the domain is already bound, and if it is, it does a getsockname()
on the socket and compares the port number to the one it saved. If the
getsockname() fails, or the port number doesn't match, it abandons the
socket and sets up a new client handle.
This still incurs some syscall overhead, which is what I was trying to
avoid, but it's still not as bad as before.
functions are implimented as wrappers around getservent(), which means it's
up to getservent() to do all the work. The NIS support in getservent()
only allows it to scan through the services.byname map one entry at a
time until it finds the requested service name/port. This can be painfully
slow due to the overhead involved (lots and lots of successive RPCs).
To fix this, we allow getservbyname() and getservbyport() to signal
getservent() that if NIS is turned on (there's a '+' in /etc/services),
the usual yp_first()/yp_next() linear search should be abandoned and
yp_match() used instead. This causes getservent() to immediately
locate the requested entry instead of wasting time groping through the
whole map.
The downside is that this trick is accomplished by exporting a couple of
pointers from getservent.c which getservbyname.c and getservbyport.c can
preset in order to tell getservent() what to do. If all three functions
were in the same source module, then the extra cruft could be delcared
static to avoid poluting the global symbol space. Maybe they should be
combined anyway. For now I've settled on prepending lots of underscores.
privileged port within a single bind(), rather than looping through
attempts to bind over and over again over progressively lower ports.
This should speed up rlogin/rsh etc, and will probably cure some of the
strange rlogin hangs that have been reported in the past where rresvport()
managed to bind() to a port address that it shouldn't have.
not based on gpl'ed code, just prototype and usage. I'm not 100% certain
they behave the same while the system is in trouble (eg: malloc() failing)
but in those circumstances all bets would be off anyway.
These routines work like sprintf() and vsprintf(), except that instead of
using a fixed buffer, they allocate memory and return it to the user
and it's the user's responsibility to free() it. They have allocate as
much memory as they need (and can get), so the size of strings it can deal
with is limited only by the amount of memory it can malloc() on your
behalf.
There are a few gpl'ed programs starting to use this interface, and it's
becoming more common with the scares about security risks with sprintf().
I dont like the look of the code that the various programs (including
cvs, gdb, libg++, etc) provide if configure can't find it on the system.
It should be possible to modify the stdio core code to provide this
interface more efficiently, I was more worried about having something
that worked and was secure. :-) (I noticed that there was once intended
to be a smprintf() routine when our stdio was written for 4.4BSD, but it
looks pretty stillborn, and it's intended interface is not clear). Since
Linux and gnu libc have this interface, it seemed silly to bring yet
another one onto the scene.
to call clnt_destroy() on a potentially NULL RPC handle. Somebody should
bang on this a bit to make sure the problem is really gone; I seem to
have difficulty reproducing it. Patch provided by Peter Wemm and
slightly tweaked by me.
- Don't call _yp_unbind() in individual ypclnt functions unless we encounter
an RPC error while making a clnt_call().
bugs in your code is to put it in the -stable branch. (Corollary: the
day you discover the bug is the day the Internet decides to route your
telnet session to the repository box via Zimbabwe.)
Remove one bogus free(result) (from _havemaster()) that slipped by me.
Flagged by: phkmalloc
Pointed out to me by: Stefan Esser
In a nutshell, this macroizes the local/global symbol scoping rules
that are different in a.out and ELF. It also makes the i386 assembler
stubs conform to i386 PIC calling conventions - the a.out ld.so didn't
object, but the ELF one needs it as it implements PIC jumps via PLT's as
well as calls. The a.out rtld only worked because it was accidently
snooping the grandparent calling function's return address off the stack..
This also affects the libc_r code a little, because of cpp macro nesting.
Each of the ypclnt functions does a _yp_dobind() when it starts and then
a _yp_unbind() when it finishes. This is not strictly necessary and it
wastes cycles: it means we do a new clnt_create() and clnt_destroy()
for each yp_whatever() call. In fact, you can do multiple clnt_call()s
using a single RPC client handle returned by clnt_create(). Ideally we only
have to create a handle to ypserv once (the first time we call a ypclnt
function) and then destroy it and rebind only if a call to ypserv fails.
- Modify _yp_dobind() so that it only creates a new RPC client handle
when establishing a new binding or when one of the ypclnt calls
invalidates an existing binding and calls _yp_dobind() to establish
a new one.
- Modify the various ypclnt functions to only call _yp_unbind() if a
call to ypserv fails.
If _ANSI_SOURCE or _POSIX_SOURCE is defined, then <ctype.h> had to
be included before <stddef.h> or <stdlib.h> to get rune_t declared.
Now rune_t is declared perfectly bogusly in all cases when <ctype.h>
is included.
This change breaks similar (but more convoluted) convolutions in the
stddef.h in gcc distributions. Ports of gcc should avoid using the
gcc headers.
In __initdb(), a failure to open the local password database is supposed
to result in a warning message being syslog()ed. This warning is only
supposed to be generated as long as the 'warned' flag hasn't been yet;
once the warning is generated, the flag should be set so that the message
is only syslog()ed once. However, while the state of the flag is checked
properly, the flag's state is never changed, so you always get multiple
warnings instead of just one.
Pointed out by: Peter Wemm
This commit covers the man pages for most of the ANSI library functions.
A few others such as strtol.3 have to mention <sys/types.h> because they
mix ANSI interfaces with less well designed extensions.
getnetgrent.c:
- Catch one bogon that snuck by: in _listmatch(), check for '\0'
rather than '\n'; strings returned from yp_match() are terminated
with a nul, not a newline.
getpwent.c:
- Rip out all of the +inclusion/-exclusion stuff from before and
replace it with something a little less grotty. The main problem
with the old mechanism was that it wasted many cycles processing
NIS entries even after it already knew they were to be exlcuded
(or not included, depending on your pointof view). The highlights
of these changes include:
o Uses an in-memory hash database table to keep track of all the
-@netgroup, -user, and -@group exclusions.
o Tries harder to duplicate the behavior normally obtained when using
NIS inclusions/exclusions on a flat /etc/passwd file (meaning things
come out in much the same order).
o Uses seperate methods for handling getpwent() and getpwnam()/getpwuid()
operations instead of trying to do everything with one general
function, which didn't work as well as I thought it would.
o Uses both getnetgrent() and innetgr() to try to save time where
possible.
o Use only one special token in the local password database
(_PW_KEYYPBYNUM) instead of seperate tokens to mark + and -
entries (and stop using the counter tokens too). If this new
token doesn't exist, the code will make due with the standard
_PW_KEYBYNUM token in order to support older databases that
won't have the new token in them.
All this is an attempt to make this stuff work better in environments
with large NIS passwd databases.
- Clear the _yp_innetgr flag immediately after calling setnetgrent() from
innetgr(). We only need the flag set to temporarily alter setnetgrent()'s
behavior. Previously, it was being cleared too late.
- When in NIS-only mode, innetgr() was wasting time doing unecessary
extra processing after it had already found a match.
- Remember to free memory allocated by the NIS functions during innetgr()
searches.
man pages up to mdoc guidelines and fix some minor formatting glitches.
Also fixed a number of man pages to not abuse the .Xr macro to
display functions and path names and a lot of other junk.
nonstandard normal version and the standard threaded version.
Removed a bogus L in a constant. fpos_t's aren't longs, and casting to
fpos_t would be verbose.
/var/run resides on an NFS filesystem (flock() always returns 0 in
this case, so we falsely assume that ypbind is dead and bail out).
Settle instead for better failure checking when using clnttcp_create()
and clnt_call() to interact with ypbind. We still try to flock()
/var/yp/binding/$DOMAINNAME.2, but if this doesn't work, we drop into
the code that retrieves the binding information from ypbind directly.
If that also fails, then we're toast. On NFS filesystems, this means
we'll be ignoring the binding file for no reason and always talking to
ypbind even though we don't have to, but at least things will work.
(I could just replace the flock(/var/run/ypbind.lock) check with
an RPC call to ypbind's NULLPROC procedure, but if the flock() of
the binding file doesn't pan out we're going to try to talk to
ypbind later anyway. *sigh* Is NFS file locking ever going to work?)
broken. The translation from network number to ASCII string was not
working correctly (you would sometimes get things like 0.244.0.0 instead
of 244.0.0).
Also copied results of yp_match() to a static buffer for consistency
with gethostbynis.c.
Note: _getnetbynisaddr() chops off trailing .0's, i.e. 244.0.0 is
truncated to 244. By contrast, getnetbyht.c code (for local /etc/networks
lookups) leaves the traling .0's in place. This means that the NIS
and local file lookups will match different things when looking up the
same network number. I'm not sure which is the correct behavior. (I
think the DNS lookup code tries all combinations -- should the NIS
and local host lookup routines do that too?)
the precision; ANSI X3J11 is not crystal clear but certainly says
that the precision specifies the number of /digits/, and signs
and "0x" aren't really digits.
NetBSD already has a similar patch.
