not setting any timer. Instead, set a 1 millisecond timer.
This ensures that ppp will come out of it's select() call after
losing carrier in -ddial mode with a reconnect period of 0 and
going to ST_OPENING, rather than waiting indefinitely for some
other event to wake ppp up.
Bump the ppp version number to indicate the event.
MFC after: 3 days
native inb/outb etc, and alpha has libio. ia64 doesn't have any yet.
move pppctl to the NOLIBC_R section (libc_r is not possible on ia64 in
its present form due to assumptions about setjmp/longjmp magic)
ports/devel/acpitools (iasl).
- Merge AML parser to build ACPI namespace
- Comment header info. out so that ASL compiler ignore them
- Fix DSDT header size to be discarded when DSDT file is specified
for input (acpidump and amldb)
- Write DSDT header as well into DSDT file for output
- Fix some trivial typo (Concatenate and SizeOf)
- Remove DEBUG_FLAGS from Makefile (acpidump and amldb)
allowed either because of the transport or configuration, send a
MRU NAK only once, then allow the negotiations to proceed.
rfc1661 says that 1500 should always be allowed and rfc2516 says
that 1492 is the maximum for PPPoE. This changes ppp so that it
only weakly suggests 1492, then goes with the default (leaving
the problem in the hands of the peer WRT how they set their MTU).
MFC after: 1 week
spin in a loop eating CPU time. This bug has existed since the
TI-RPC import. The problem is that we should only enter the select
loop if at least one TCP server was started. Fix this by having
the master nfsd become a UDP server itself if there are no TCP
servers.
Also improve/correct the code for cleaning up slave nfsd processes
and unregistering with rpcbind when the master nfsd exits.
One issue that remains open is that if a slave nfsd dies, then all
nfsds will shut down. This is because nfssvc() in the master nfsd
returns 0 when the master nfsd receives a SIGCHLD.
Submitted by: tmm
non-backward compatible changes in the format of packing list and handle
them gracefully;
- fix a longstanding issue with symlinks handling. Instead of recording
checksum for the file symlink points to, record checksum for the value
returned by readlink(2). For backward compatibility increase packing list
format minor version number and provide a fallback to a previous behaviour,
if package in question was created with older version of pkg_* tools;
Submitted by: Alec Wolman <wolman@cs.washington.edu>, sobomax
- don't record MD5 checksum for device nodes, fifo's and other non-regular
files.
Submitted by: nbm
MFC in: 2 weeks
allows for an easy way to backup old version of port prior to installing
a new one;
- silence compiler warnings by killing some unused variables and adding
all includes necessary.
MFC after: 2 weeks
1) Allow the sending of more than one control message at a time
over a unix domain socket. This should cover the PR 29499.
2) This requires that unp_{ex,in}ternalize and unp_scan understand
mbufs with more than one control message at a time.
3) Internalize and externalize used to work on the mbuf in-place.
This made life quite complicated and the code for sizeof(int) <
sizeof(file *) could end up doing the wrong thing. The patch always
create a new mbuf/cluster now. This resulted in the change of the
prototype for the domain externalise function.
4) You can now send SCM_TIMESTAMP messages.
5) Always use CMSG_DATA(cm) to determine the start where the data
in unp_{ex,in}ternalize. It was using ((struct cmsghdr *)cm + 1)
in some places, which gives the wrong alignment on the alpha.
(NetBSD made this fix some time ago).
This results in an ABI change for discriptor passing and creds
passing on the alpha. (Probably on the IA64 and Spare ports too).
6) Fix userland programs to use CMSG_* macros too.
7) Be more careful about freeing mbufs containing (file *)s.
This is made possible by the prototype change of externalise.
PR: 29499
MFC after: 6 weeks
allow to limit the prototype quota distribution (-p)
to a single filesystem. Useful when initializing
quotas on a newly added disk.
PR: bin/30816
Submitted by: Dmitry Morozovsky <marck@rinet.ru>
ethernet controllers. This adds support for the 3Com 3c996-T, the
SysKonnect SK-9D21 and SK-9D41, and the built-in gigE NICs on
Dell PowerEdge 2550 servers. The latter configuration hauls ass:
preliminary measurements show TCP speeds of over 900Mbps using
only normal size frames.
TCP/IP checksum offload, jumbo frames and VLAN tag insertion/stripping
are supported, as well as interrupt moderation.
Still need to fix autonegotiation support for 1000baseSX NICs, but
beyond that, driver is pretty solid.
'lpc tclean'. In some obscure cases, the previous version could cause a
valid user job to be removed (by 'clean'), due to invalid assumptions in
the sort routine. This was a rare problem, unless ctlinfo.c is compiled
with 'LEAVE_TMPCF_FILES' turned on (to check what that rtn was doing).
Reviewed by: Lack of outcry on -audit and freebsd-print@bostonradio.org
MFC after: 10 days
floppies if you try to actually use it. This code will work fine if
you build and use sysinstall on a running system, since you have the
benefit of an installed termcap file. However, this code does not
work on an MFSROOT, where you must set the TERMCAP environment
variable properly. Unfortunately the quick fix of setting the TERMCAP
variable doesn't seem to fix the problem either. olgeni will add this
functionality back once it's been fully implemented (hopefully using
the working code in termcap.c).
PR: bin/30739
Submitted by: Alexey V. Neyman <alex.neyman@auriga.ru>
Discussed with / Pointy hat to: olgeni
MFC after: 3 days
survive a sysinstall Ctrl-C -> 'Restart'. This fixes another annoying
bug where restarting sysinstall will try to reload kernel modules and
do other external things that have already been done. For now, use
these persistent variables to keep track of module, usbd, and pccardd
initialization.
Bug found by: rwatson
MFC after: 1 week
environment. This fixes an annoying bug where hitting Ctrl-C and
telling sysinstall to 'restart' will do no such thing since many of
the options are still set and so you won't be prompted for them
again.
MFC after: 1 week
variable to check for debug functionality. Previously, you had to set
both 'debug' and 'SYSINSTALL_DEBUG' to get a log of sysinstall's
activities. Now, only 'debug' is necessary.
This was described in the original RFC wrt lpr, but most lpr's do not
actually implement it. There is some indication that MacOS 10.1 will
be using this when sending postscript files to print servers (that is
what "o"-type was supposed to signify -- postscript files).
MFC after: 1 week
- fix harmless compiler's warnings (unused variables and missed prototype);
- before refusing to delete package because "there are packages installed
that require this package" check that packages in question is actually
installed;
- add new `-r' option to pkg_delete(8), which instructs it to delete not only
packages specified at command line, but all packages that depend on
specified packages as well.
MFC after: 2 weeks
than really solve it. This approach (inspired by Ruslan's patch) solves
the real problem by stripping the local domain off the host name in the
config line structure.
Also mark a bunch of code sections that either do not check the return value
of a strdup(), malloc() or calloc() call, or do not properly handle a NULL
return.
1.64, i.e. July of last year. Also fix a minor style bug in the same code.
PR: bin/28634
Pointy hat to: dwmalone
Pointed out by: my buggy DSL router's remote logging facility
1. FreeBSD should be spelled with "F" and "BSD" in capitals,
even in comments.
2. Please don't use hard sentence breaks. Always start a
new sentence from the new line.
3. Don't use `#' or `$' in EXAMPLES; this has been fixed
recently in share/examples/mdoc/ templates.
4. Nuke the prog_name variable burncd.c, use getprogname(3).
correct mode via ancontrol, you can use bpf to sniff raw 802.11 frames.
Who want's to port AirSnort. ;-)
Submitted by: Doug Ambrisko <ambrisko@ambrisko.com> (author)
David Wolfskill <david@catwhisker.org> (port to current)
__unused, and change local variables named `sin' (struct
sockaddr_in) to `sin4'. (`sin' conflicts with the definition of
sin(3), which gcc assumes to be defined even if math.h isn't
included (it's a builtin). This is probably a bug in gcc.)
- Apply WARNS=1. WARNS=2 was not used because this program assigns
string literals to (struct iovec).iov_base for writing, and the only
clean way to silence -Wwrite-strings in that case would be to
strdup() and consequently free() those literals, which I considered
too disruptive.
Reviewed by: bde (partially)
for each option in the DHCP lease file. The DHCP lease parsing code
specifically ignores more than the first nameserver, but it didn't
previously deal with the case of more than one router. This caused
segfaults and a painful death when installing on a network with
multiple routers.
PR: misc/16003
COPTS towards the end of final CFLAGS so that it can be used to
override Makefile and other defaults. Using it in Makefiles risks
having options set using it clobbered when somebody uses it on the
command line.
Approved by: bde
doesn't talk about these files elsewhere, doesn't use the files by
default, and the names are dependent on site-specific newsyslog
configuration.
PR: 30348
Submitted by: Giorgos Keramidas <charon@labs.gr>
interactive case. This already works for non-interactive installs,
but at least one user thinks it would be useful and it certainly seems
more correct to allow it here as well.
So, this will now work :
# sysinstall netDev=fxp0 tcpMenuSelect
PR: bin/30229
Submitted by: Mikhail Teterin <mi@aldan.algebra.com>
This will now allow sysinstall to work properly if a FreeBSD CD/DVD is
already mounted as /cdrom, instead of just crapping out when it tries
to mount as /dist and gets EBUSY.
PR: conf/28081
Tested by: jhb
useful for post install configuration or other cases that might not be
handled by usb.c. (usb.c already sets usbd_enable iff sysinstall
detects usb during install).
PR: bin/18946
Submitted by: Peter van Heusden <pvh@egenetics.com>
Reviewed by: jhb
and RTSOL in sysinstall. If the respective TRY_FOO variable is set to
"YES" then it will be tried without prompting the user.
However, if the TRY_FOO variable is set to "NO" then the user will not
be prompted for a choice. This is the correct behavior, since we want
people to be able to script sysinstall in either case.
However, the default TRY_FOO variable has been "NO" since 1999. This
is incorrect, and when the logic was corrected in tcpip.c this has the
effect of never giving the user a choice to use DHCP or IPv6. The
value should be undefined until it is set by a script or by the user.
Submitted by: Randy Pratt, Chern Lee, many others.
UPGRADE.TXT along with a YesNo dialog requesting confirmation of
the upgrade. During the transition to RELNOTESng, UPGRADE.TXT got
folded into a file that eventually renders as INSTALL.TXT, which
makes sysinstall complain about a non-existent file. As a
solution/workaround, point the user at INSTALL.TXT, and then request
confirmation.
Noticed by: rpratt (on 4.4-RC3)
Approved by: jkh
1) Removed the low-level (unneeded in this context) details on
escape sequences that are already documented in screen(4).
2) Removed whitespace at EOL.
3) Removed the garbage from previous revision.
16 bits access is required by nsp driver to work in SMIT mode.
Since previously (1.65 and before in current, and 1.46.28 and before
in stable branch) 16 bits access was default, I hope it will break nothing.
Okayed-by: imp
mail, if configured to do so. Some sites have setups where the user's
mail is delivered to their home directory, so sending mail before is
exists didn't work.
PR: 29892
added but not its postrequisite -ltermcap.
Fixed breakage of DPADD in previous commit. ${LIBREADLINE} was misspelled
-lreadline. This should have been fatal since there is no file named
-lreadline, but it worked because of an undcumented bugfeature in make(1)
(or its configuration files): missing source files named -l* are silently
assumed to be up to date libraries. `make checkdpadd' also fails to detect
this error.
assignment of `l' in `gr_update' to the return value of snprintf. It
claimed to have fixed the case where snprintf returned -1--in fact, it
broke the entire routine. Not setting `l' here causes fileupdate() to
invariably fail with EINVAL because it does its own check to assert
that the parameter isn't -1.
for ntp-4.1.0.
Unfortunately, David Mills insists on managing the documentation in
such a way as to make it impossible for me to make things easy on our
translators, without printing out the documentation and reading through
it side-by-side with a finger on each page.
post-configuration "Startup" menu. In the event that diskcheckd is
removed, this can easily be trimmed also; in the mean time, it allows
diskcheckd to be easily disabled using our documented management
tool
the system on which it is running. The hostname is reloaded when
'HUPped' and a log message generated to note a change (before anyone
points it out, this is not an added security feature).
PR: bin/24444
Reviewed by: freebsd-audit
Approved by: ru
MFC after: 2 weeks
dictionaries are out of sync.
This avoids the complications that happen when our original reset
request gets lost in transit (quite likely in hind sight, given a
lossy link) when we end up ignoring the peer for the next (up to)
256 packets.
Submitted by: Nick Sayer <nsayer@quack.kfu.com>
originally written in January, 2000, but have been substantially updated.
- No longer use hz/stathz and the CPU times in computing the TTY stats,
but rather use etime, like the disk stats.
- Clean up malloc/realloc failure tests.
- Use a new integrated routine to fetch devstat information via sysctl or
KVM.
- Get rid of the X() macro for calculating CPU stats
- Use rint() on the CPU state display to avoid truncation errors. (this
requires libm)
- Clean up flag usage somewhat.
Reviewed by: bde
when we ioctl(TUNSIFINFO) under OpenBSD)
o Don't bring the interface up immediately
o Don't complain about unrecognised interface flags in ``show iface''.
the size of the tsp_name field is OS-dependent. 4.3BSD used a 32-byte
field, FreeBSD uses MAXHOSTNAMELEN and RedHat apparently uses a 64-byte
field. As a result, sanity checking code added a few months ago to detect
short packets will fail when interoperating with one of these other vendors.
Change the short packet detection code to expect a minimum packet size
corresponding to the 4.3BSD implementation, which should be a safe minimum
size.
Submitted by: Stephen Whiteley <stevew@best.com> (based on)
PR: misc/29867
and mask to the routing socket, otherwise the update fails.
Warning provided by: markm
The code here was broken for FreeBSD when IPv6 support was added, but
was fixed for OpenBSD. OpenBSD expects the gateway and mask to be
supplied and fails the update otherwise.
on older kernels correctly. Terminate the loop when we find a
suitable irq. Also, only try to select from the pool. Cleaned up the
two cases (IRQ picked by the user and ?) into one.
MFC upon re approval.
and implement a far more subtle and correct fix.
The reason behind the infinite loop was that ppp was trying to make up
initial IPv6 numbers and wasn't giving up when it failed unexpectedly to
assign the addresses it just fabricated to it's interface (thinking that
the reason was because another interface was using the same address).
It now attempts this up to 100 times before just failing and trying to
muddle along (in reality, this should never happen more than a couple
of times unless our random number generator doesn't work).
Also, when IPv6 is not available, don't even try to assign the IPv6
interface address in the first place...
monthly and weekly, respectively. Also fix the @yearly shortcut so
that it doesn't execute daily during January. OpenBSD and NetBSD also
appear to have this bug.
PR: bin/21152
sizes on a route.
IMHO this shouldn't be necessary (the destination & mask/prefixlen
should be enough), but without it, the default route update under
OpenBSD will fail.
Thanks to: Russell T Hunt <alaric@MIT.EDU>
the name for the moderate security profile is "moderate", not
"medium", so update this one reference to it as "medium".
This is a 4.4-RELEASE MFC candidate.
MFC after: 2 days
Add a timestamp to the comment so that it's possible to see when
changes were made.
e.g.:
# -- sysinstall generated deltas -- # Wed Aug 15 18:10:20 2001
progs prog1
special prog1 objdir ../../prog1/obj
special prog1 objs prog1.o
This fixes a bug that I introduced around the time of 4.2-release.
Reported by: Larry Baird <lab@gta.com>
use it. If not, then loop asking for each one, with normal -I
processing. This will effectively disable -I for when the pcic is in
PCI function interrupt routing mode.
structures (well, they're treated as opaque).
It's now possible to manage IPv6 interface addresses and routing
table entries and to filter IPV6 traffic whether encapsulated or
not.
IPV6CP support is crude for now, and hasn't been tested against
any other implementations.
RADIUS and IPv6 are independent of eachother for now.
ppp.linkup/ppp.linkdown aren't currently used by IPV6CP
o Understand all protocols(5) in filter rules rather than only a select
few.
o Allow a mask specification for the ``delete'' command. It's now
possible to specifically delete one of two conflicting routes.
o When creating and deleting proxy arp entries, do it for all IPv4
interface addresses rather than doing it just for the ``current''
peer address.
o When iface-alias isn't in effect, don't blow away manually (via ``iface
add'') added interface addresses.
o When listening on a tcp server (diagnostic) socket, bind so that a
tcp46 socket is created -- allowing both IPv4 and IPv6 connections.
o When displaying ICMP traffic, don't display the icmp type twice.
When display traffic, display at least some information about unrecognised
traffic.
o Bump version
Inspired after filtering work by: Makoto MATSUSHITA <matusita@jp.FreeBSD.org>
options used to build ppp.
Currently, this is a no-op and only handles LOCALNAT and LOCALRAD cases.
This will be used for the upcoming ipv6 changes, and allows a shared
man page between OpenBSD and FreeBSD.
conservative default, and actually prompt specifically for inetd rather
than handling it as a side effect of the security profile. Update the
help file to reflect this change.
o Rename "Fascist" to "Extreme" in the source code, to match the names
presented to the user.
o Remove portmap and inetd from profile management. Portmap is now
disabled by default, but automatically turned on if a feature requires
it (such as NFS, etc).
This is an MFC candidate for 4.4-RELEASE.
Reviewed by: freebsd-arch@FreeBSD.org
Approved by: re@FreeBSD.org
MFC after: 2 days
Not much, but it is better than nothing as it discourages
the extremely lazy.
Please read the actual text (the last text was softer than the commit
message about it) before giving me feedback.
Also, in the last commit I also tagged the newly optional elements in
the command line as optional.
WEP IS INSECURE. DO NOT USE IT.
and point people to details on the attack:
http://www.cs.rice.edu/~astubble/wep/wep_attack.html
and recommend people use ipsec instead if possible.
Approved by: kris
Mandoc police: Please do your worst. I'd like to merge similar text
into ancontrol and ifconfig.
Avoid using parenthesis enclosure macros (.Pq and .Po/.Pc) with plain text.
Not only this slows down the mdoc(7) processing significantly, but it also
has an undesired (in this case) effect of disabling hyphenation within the
entire enclosed block.
post-install config, reduce the potential confusion from the existence
of both configTTYs and configTtys by renaming configTTYs to
configEtcTtys. While this is not a C naming conflict, it was probably
a poor choice of names on my part.
into sadb_x_sa2_sequence from sadb_x_sa2_reserved3 in the sadb_x_sa2
structure. Also the output of setkey is changed. sequence number
of the sadb is replaced to the end of the output.
Obtained from: KAME
crash dumps, and make it use sysctl for all data retrievals in the
"live" case (i.e. when not using iostat on a crash dump).
Remove setgid kmem for the iostat executable, it is not needed any
more after these changes.
Reviewed by: ken
- clean_mtab():
Actually use the strdup'd version of the host that we go to the
trouble of creating.
- do_umntall/do_umount:
Don't return success if clnt_create() fails.
Don't access a client pointer after it has been destroyed.
Remember to destroy the authentication information we created.
crypto bits installed and/or NOCRYPTO/NO_OPENSSL is defined. This unfortunately
meants that usr.bin/chkey, usr.bin/newkey and usr.sbin/keyserv have also to
be disconnected.
IMO it is merely a workaround, the proper solution is to move libmp to
src/crypto where it belongs and use libgmp for the cryptoless builds instead.
Missed by: dd
Use '' quotes instead of `' to delimit names of files and packages in
warning and error messages, because it is easier to cut-n-paste name in
question that way (single click) without confusing the shell. And yes,
I know that it is less eye-candy...
MFC after: 1 month
some of the config problems that we've been seeing (where wi0 tries to
allocate 0x138-0x198, for example).
Use err(1,"foo") rather than perror + exit while I'm here.
system installation process. This allows users installing via serial
console to enable serial console login during the installation
process using an un-customized install. The user is not prompted to
modify /etc/ttys during a normal install, but is offered the
opportunity during post-install configuration.
- Introduce configTTYs(), which describes the benefits of editing
/etc/ttys, and asks for confirmation before spawning the editor.
- add configTTYs to the post-install configuration, as well as to
the global configuration index.
by providing the opportunity to edit inetd.conf during the system
installation process. The following modifications were made:
(1) Expand the Anonymous FTP description dialog to indicate that inetd
and ftpd must be enabled before it can be used.
(2) Introduce a new configInetd() pair of dialogs, the first describing
inetd, giving a couple of examples of services that require it, and
hinting at potential risk, then asking the user if they wish to
enable it. The second indicates that inetd.conf must be configured
to enabled specific services, and asks if the user would like to
load inetd.conf into the editor to modify it. Add this
configuration action to the index.
There are some further improvements that might be considered:
(1) Provide a more inetd.conf-specific configuration tool that speaks
inetd.conf(5). However, this is made difficult by the "yet another
configuration format" nature of inetd.conf, as well as its use of
commenting to disable services, rather than an in-syntax way to
disable a service without commenting it out. Submissions here
would probably be welcome.
(2) There's some overlap between settings in the somewhat obtuse
Security Profile mechanism and other settings, including the inetd
setting, and NFS server configuration. As features become
individually tunable, they should probably be removed from the
security profile mechanism. Otherwise, somewhat counter-intuitively,
sysinstall (in practice) queries multiple times whether inetd, nfsd,
etc, should be enabled/disabled. A possible future direction might
be to drive profiles not by degree of paranoia, rather, the set
of services desired. Or simply to remove the Security Profile
mechanism and resort to feature-driven configuration.
Reviewed by: imp, chris, jake, nate, -arch, -stable
When encryption (MPPE) is enabled, WindowsME and Windows98 both
fail because of the extra byte, suggesting that they autheticated
successfully in their log and then dropping the connection, telling
the user that the peer doesn't support compatible encryption
options.
MFC after: 1 week
byte of the packet to contain '\0'.
Windows 98 gets this wrong, dropping garbage into the last byte and
failing authentication.
Now, we notice this and whinge to our log file that we're compensating
for the corrupt data.
will soon return the irq from the pcic bridge in cases where't that's
appropriate.
Note: I've had to disbale -I option for the moment. I've made it easy
to reenable it for people that need it.
MFC After: soon!
doing PPPoE and the default MRU is therefore too big.
When negotiating with win2k, we ask for MRU 1492 and the win2k box
NAKs us saying ``MRU 1492''. This doesn't make sense to me. When
we continue to request MRU 1492, the win2k box eventually REJs our
MRU. This fix allows negotiations to continue at that point,
bringing the link up and potentially allowing the win2k box to send
us frames that are too large. AFAICT this is better than failing
to bring the link up.... probably !
I have no idea how to do the equivalent of ``route get'' or
``ifconfig -a'' under win2k, so I can't tell what MTU it actually
ends up using.
I believe the bug is in win2k (it's certainly mis-negotiating).
I'll MFC given the release engineers permission as code freeze
begins on August 1.
PR: 29277
MFC after: 3 days
inconsistently named "ptmp" and "etc_ptmp". This commit changes
it to "passwd_tmp" for consistency and to match OpenBSD's name
for the variable.
Consulted with: jedgar
once. If they repeat the request (again without the IPADDR option)
ACK it.
I've had reports that some ppp implementations will not assign
themselves an IP number. This should negotiate with such things.
MFC after: 3 days
When reading the code I had to stop, say "ok, what does *these*
modifications of strl*() do? Pull out grep. Oh, not in add/, maybe above
in ../lib/? Yep. So what do they do? Comments above them are misleading,
guess I'll have to read the code. Oh, they just test strl* against the
size and return the result of the test. Now I can continue to read the
code I was.
The uses of s_strl*() then test that result and errx()'s.
Lets think about the "optimized" code I am removing:
In general the compiler pushes the three args to strl* onto the stack and calls
s_strl*. s_strl* has to indirectly access 3 args from the stack. Then push
them on the stack a 2nd time for the real strl* call. s_strl* then pops the
return from strl* off the stack; or moves it from the register it was returned
in, to the register where tests can happen. s_strl* then pops the three
arguments to strl*. Perform the test, push the result of the test, or move it
from the result register to the return value register. The caller to s_strl*
now has to either pop the return value of s_strl* or move it from the return
value register to the test register. The caller then pops the three args to
s_strl* off the stack (the same args that s_strl* itself had to pop off after
the real call to strl*). The s_strl* caller then performs a simular test to
what has already been done, and conditionally jumps. By doing things this way, we've given the compiler optimizer less to work with.
Also, please don't forget the that call to s_strl* has possibly jumped to code
not in the cache due to being far away from the calling code, thus causing a
pipeline stall.
So where is the "optimization" from s_strl*?
It isn't code clarity.
It isn't code execution speed. It isn't code size either.
in the signal handlers which may pose a risk when executable by untrusted
users.
Submitted by: Przemyslaw Frasunek <venglin@freebsd.lublin.pl>
MFC After: 3 days
correct the error-checking that was there. With the old code, an error
return from getpwuid(daemon_user) could turn the lpd process into a very
effective fork-bomb...
Reviewed by: freebsd-audit freebsd-print (a little...)
MFC after: 6 days
blown over by the Hurricane and had a house dropped on you by the Tornado.
Now it's time to have your parade rained on by... the Typhoon!
This commit adds driver support for 3Com 3cR990 10/100 ethernet
adapters based on the Typhoon I and Typhoon II chipsets. This is actually
a port of the OpenBSD driver with many hacks by me.
No Virginia, there isn't any support for the hardware crypto yet. However
there is support for TCP/IP checksum offload and VLANs.
Special thanks go to Jason Wright, Aaron Campbell and Theo de Raadt for
squeezing enough info out of 3Com to get this written, and for doing
most of the hard work.
Manual page is included. Compiled as a module and included in GENERIC.
- Declare mtabhead as an extern in mounttab.h and define it only in
mounttab.c.
- Remove shared global `verbose' and instead pass it as a parameter.
- Remove the `mtabp' argument to read_mtab(). It served no purpose
whatsoever, although read_mtab() did use it as a temporary local
variable.
- Don't check for impossible conditions when parsing mounttab, and
do detect zero-length fields.
- Correctly test for strtoul() failures - just testing ERANGE is wrong.
- Include a field name in syslog errors, and avoid passing NULL to
a syslog %s field.
- Don't test if arrays are NULL.
- If there are duplicates when writing out mounttab, keep the last
entry instead of the first, as it will have a later timestamp.
- Fix a few formatting issues.
Update rpc.umntall and umount to match the mounttab interface changes.
- Remove unnecessary and unused local variables.
- Include useful information in error and warning messages.
- Fix the logic for expiring mounttab entries.
- Remove calls to getaddrinfo - the results were not used.
- Simplify some string handling by using snprintf.
- Fix usage.
than the long-standing -w option in NetBSD, so change it before anyone in
FreeBSD gets used to it. For now, -w is still accepted, but prints out
some warnings via syslog.
MFC after: 1 week
Problem 1 is that the config entry hangup flag is zeroed only at
CONNECT_ACTIVE_IND in msghdl.c. If any (other) call is disconnected
after EV_MDO and before CONNECT_ACTIVE_IND, the cleanup routine will
disconnect the in-progress dialout as well, if its hangup flag is
nonzero (which it is likely to be) after the previous incarnation of the
cfg entry. Patch-1 fixes this by clearing the hangup flag as soon as a
cfg entry is reserved for the call.
Submitted by: Juha-Matti Liukkonen <jml@cubical.fi>
Problem 2 is that doing a local hangup (eg. by writing "H" to the
dialout device) to a call which is already disconnected results in isdnd
moving the cfg entry to an illegal state, from which there is no
recovery. This is tricky because there is no way to synchronize local
hangup with the remote end (ie. the callee can always hang up at an
inconvenient time)! Hence, patch-2 alters fsm.c's EV_DRQ state table
such that the local hangup request is processed or ignored in most
states, even for disconnected calls.
Submitted by: Juha-Matti Liukkonen <jml@cubical.fi>
Don't set BINMODE to 500. This is not a setuid program.
Note: the dpt utilities have never been attached to the world and
haven't been compilable for a year or two.
- Lose any stray host bits that a user may have entered when providing
a network number and netmask to the `-a' option for IPv6. This is
corresponding to 1.79 that is for IPv4 only.
MFC after: 1 week
another, unknown option.
Submitted by: Naoki Kobayashi <shibata@geo.titech.ac.jp> and
Harti Brandt <brandt@fokus.gmd.de>, respectively.
Pointy hat to: dd
give an example of how to rotate logs at the beginning of the month.
Although they sound the same, since both of them rotate logs at the
beginning of the day, the former ended up taking place on, e.g., July
31 00:00 instead of the expected July 31 23:59. This is contraty to POLA.
Submitted by: Dan Langille <dan@langille.org>
e->cmd. free_entry() now does the right thing with
partially-initialized structures.
load_entry(): Don't call env_free() on e->envp throughout the routine
before jumping to eof; the free_entry() call at that label will take
care of it. The previous behavior resulted in e->envp being free'd
twice (well, the second time would usually result in a crash, but
that's besides the point); once in load_entry(), and once in
free_entry() after the former called the latter. Also note that the
check added to free_entry() (above) doesn't help, since e->envp wasn't
reset to NULL after env_free().
Submitted by: Mark Peek <mark@whistle.com>
this entire subtree would be in src/contrib, but if that isn't going
to happen at least this has a chance of warning off unsuspecting
committers.
Approved by: wollman
for glue records and forces the glue record to be reloaded from the real NS.
The 5% ttl reduction can cause the glue IN A to timeout before the NS
record in certain situations, such as when the domain owner does not match
up NS records with the NIC. This behavior by domain owners is becoming
more common as primary zone serving iterates through another glue level
(i.e. exodus hosts the master NS's but the customer then redirects the
NS's to the real DNS servers). The result is that named would appear to
work properly for about 40 minutes, and then unexpectedly fail for that
zone. This causes named to behave very inconsistently and a google search
shows that it has obviously frustrated many, many people. So until the bind
guys make named behave consistently (either fail instantly or accomodate the
case), we need to set this option to accomodate the case. The result
will be much more consistent behavior and fewer head-scratching failures.
MFC after: 3 days
receives them from other hosts. This is meant to protect from both
nefarious users (which maybe broke into some remote host that we accept
print jobs from), and broken implementations of lpr on other platforms.
This is done by changing recvjob.c to call the new ctl_renametf()
routine in the new common_source/ctlinfo.[ch] files. This will not
affect jobs coming via lpr on the local machine.
Reviewed by: freebsd-print@bostonradio.org & freebsd-audit
MFC after: 16 days
often by just telling gcc that some internal routine is "__printflike"
(work done by Kris Kennaway <kris@FreeBSD.org>). Also fix the new warnings
which show up once gcc starts checking the "printf-like parameters" passed
to those routines.
MFC after: 1 week
This fixes a problem with using print filters (if=, of=, etc) that showed
up in -current around June 20th. That problem initially reported by
Georg-W Koltermann <gwk@sgi.com>, while most of the investigation that
led to this fix was done by Anton Berezin <tobez@FreeBSD.org>.
Reviewed by: freebsd-print@bostonradio.org
MFC after: 1 week
- Use '\0' for a char instead of NULL.
- Explicitly compare against the global `nullstring' to determine if
a non-NULL uaddr is not malloc'd.
- Remove some unnecessary casting of the argument to free().
- In rpcbproc_callit_com(), move the freeing of m_uaddr to the
cleanup code at the end of the function.
- To avoid confusion and possible alignment problems, change
netbufdup() to allocate the netbuf struct and the sockaddr buffer
separately, and change netbuffree() accordingly. This makes it
produce netbufs that are consistent with all other netbufs in
rpcbind.
comparing bit by bit.
Make the logic in in6_fillscopeid() match that in our ifconfig(8):
only set the scope ID if there is one in the address and none in
sin6_scope_id.
Correct a comment in network_init() that didn't make sense; it was
probably never updated after it was pasted from similar code in
addrmerge().
stealth hints loading. 'make release' has been fixed to not need this
now anyway. If you want static hints, specify it explicitly.
Hey! Why did it suddenly get so dark??
getopt(3) (and can't be converted without breaking compatibility), and
it's very irritating to have it silently DTWT if one combines options
together (e.g., "-msS domain,server").
to be included into this one. This works the same way as #include
does in C; as far as the user is concerned, the included file is
inlined into the current one.
Since config(8) is no longer limited to working on one user-supplied
file, printing just a line number in an error message is not
sufficient. The new global variable yyfile represents the file
currently being parsed, and must be printed as well.
Reviewed by: imp
Obtained from: OpenBSD
until a 20ms select(2) timeout occurs, but if there is a continuous
stream of movement events, button events can be delayed indefinitely
because the select never has to wait long enough for a timeout.
The delay and mouse event reordering that result are very noticable
and sometimes quite frustrating when dragging windows etc. in X.
Add a simple mechanism that avoids this re-ordering. While a button
event is deferred, we discard up to 3 movement events to allow for
mouse jitter. If more movement events occur, then we immediately
timeout the deferred button event and let the movement proceed.
This change only affects the 3-button emulation case.
perform a key change, *and* our sequence numbers have wrapped,
ensure that the number of key changes is calculated correctly.
The previous code counted down from a negative number to zero,
re-encrypting the current key on each iteration - this took some
time and strangely enough got the answer wrong !!!
Fix a(nother) spelling mistake while I'm there.
Use -tag list in the FILES section to work around the bug
when .Pa font is not restored to its original value if one
of the -hang, -ohang, or -inset lists is used in the FILES
section. (The fix for the bug has just been submitted to
the GNU Groff maintainers.)
Also, fixed the Handbook reference in the SEE ALSO.
